Will Apple's 30 " Display overheat a 17" PB?

I am about ready to purchase a 17 PowerBook and the 30" Apple Cinema Display. Can anyone tell me if they have had any overheating issues with similar setups (ie; 15" PB)??? Does the PB fan run continuously when 30" display is used? Thanks to all that may reply.
PowerBook G4 12" aluminum; Mac OS X (10.4.2); 768

I run a Cinema with a 15" and also report that the PB stays pretty cool. The fan never runs but that could have as much to do with the applications running than with the hardware configuration, so YMMV. I often set the PB on the foot of the monitor. The foot is a big aluminium slab and it can really carry heat away from the PB, not that there is that much being generated. I keep a thin gel pad between the PB and the foot to prevent scratching of the surfaces.

Similar Messages

HT4623 I found an update ios6 in my iphone settings and then I tapped on install ,but it is going on and nothing is displaying .Only apple logo is displaying frequently.It has been happening for 13 hours.my question is how much time it will take to upd

Can anybody help in my concern below
I found an update ios6 in my iphone settings and then I tapped on install ,but it is going on and nothing is displaying .Only apple logo is displaying frequently.It has been happening for 13 hours.my question is how much time it will take to update ios

Read this: iOS 4: Updating your device to iOS 5 or later
... oh I think it is a 3gs or a 3
This makes a difference. What does it say in Settings > General > About?

Will the Apple 30 Inch display work with my MacBook pro? Confused!!

Hi all,
thinking of getting a used Apple 30 inch display to go with my MBP, but not sure if it will work at the correct resolution. Ive read you need a Duel Link DVI cable, but I have Thunderbolt not mini-display port. My MBP is early 2011 (think), so I am really confused. The 27 Incher with thunderbolt would be good too, but they are too expensive for me.
Graphics card is AMD Radeon HD 6490M, 16mb RAM. 10.6.8.
I would really appriciate any advice !
Thank you all in advance,
Bish.

I am replying to my own post here, but i have made excellent progress and wanted to let any other viewers in the same boat, know the solution.
Basically, the Duel Link DVI cable from Apple (£70 / $99) is the bad boy that works. My confusion was Thunderbolt, but apparently Thunderbolt IS ALSO a DVI port ! So, buy the 30 incher on Ebay or off a mate, and BANZAI ! done. Glorious res of about 2560x1600pixels is awesome!
The only downside here is that it might be too big LOL !!!!
Good luck all
Bish

HT2810 Apple HD Cinema Display will not come back on after brief power cut.

My Apple HD cinema display won't come back after a brief power cut.
There is the little white power light on the front which pulses on three times and then extinguishes, repeatedly.
The Mac itself seems to power up although it's hard to tell if it's bboting properly, as I cannot see anything on the screen.
There is power going to both units so I have no idea what is happening.

This sounds like a very common problem. If the blinks are one short, one longer, one short..... long pause... repeat.... start searching this forum. There are also Youtube videos on solving it. If this is the problem, the solution is easy. You block both center pins on the 10 pin power connector. Its crazy but it works.
https://discussions.apple.com/thread/2086442?start=30&tstart=0
http://www.youtube.com/watch?v=vodDfic8omA
I just used a very thin strip of paper folded in half and slipped into the display's connector so it covers ONLY the two center contacts, then slip it into the power module very carefully. Make sure there is some slack in the paper as otherwise it will tear and the contact will still be made. If it doesn't work at first, try again as the paper made have torn in process. It would be better to use something stonger like a very thin strip of mylar. Or you can do what the video shows, but I didn't try that exactly.

No flashlight apps will work after glass display replaced at an apple store a week ago

Tried several but no flashlight app will work . Replaced display 1week ago at an apple store

so bring it back

Shattered Display screen. Will Apple fix this with no AppleCare?, Shattered Display screen. Will Apple fix this with no AppleCare?

I have a 13 inch MacBook Pro that is two years old. I tripped today and dropped it walking down my hardwood stairwell. Will Apple still be willing to fix it with no AppleCare protection?

Sure, you'll just have to pay.
FYI:
You'd have to pay even if you had AppleCare, as such damage is not covered by warranty or AppleCare.

How to Connect Early 2011 MBP 13" to Apple 20" Cinema Display at 1680x1050?

My early 2011 MacBookPro will only display 1280x800 on an external Apple 20" Cinema Display. The MBP's specs say that it will support dual displays and video mirroring simultaneously at full native resolution on the built-in display and up to 2560x1600 on an external display. The 20" Cinema Display specs indicates that it supports an optimum resolution of 1680x1050. The 20" display is connected to the MBP through it's Thunderbolt port using an Apple Mini Display Port to DVI connector. No luck.
I've tried using the latest version of SwitchResX set to 1680x1050. It says it is configured to 1680x1050 but the display does not respond.
Anyone had success setting up this combination of MPB and Cinema Display at the max resolution of 1680x1050?

To clarify. The MacBook Pro displays 1280x800 and the Apple Cinema Display mirrors it at 1280x800. I cannot get the ACD to display at it's max capable resolution of 1680x1050.
The MPB has 16GB ram so 512 SDRAM is available to the Intel HD Graphics 3000 chipset.

How do I connect Apple 20" Cinema Display to orignal MacBook Air which does not have a Fire-Wire port. Is this possible? Any advice would be appreciated. I have the Micro-DVI to DVI adapter. Norm

I Wish to connect my 6 year old Apple 20" Cinema Display to an orignal MacBook Air which does not have a Fire-Wire port. Is this possible? Any advice would be appreciated. I have the Micro-DVI to DVI adapter. Norm

The FireWire cable is just for the FireWire ports on the display. The display will run without it.

Mini DisplayPort adapter for 23" Apple HD Cinema Display?

hello all,
I'm sure this has been asked and answered here, but I can't find it! (grrr...)
I've got an 23" Apple HD Cinema display and a new iMac. The iMac has a "mini DisplayPort". Now, the Cinema Display has a 3 x 10-pin (not 3 x 8) DVI connector. The WIKI thing about DVI calls it a "DVI M1-DA (Dual link + USB)".
http://en.wikipedia.org/wiki/DigitalVisualInterface
For the life of me, I can't find an Apple (or other) adapter with the 10-pin connector to attach to the iMac?
many thanks,
b myers

If it's the old, plastic cased, 23" display, it may use ADC (Apple Display Connector).
<http://upload.wikimedia.org/wikipedia/commons/0/09/AppleDisplayConnector.jpg>
In that case, you will need a DVI to ADC adapter
<http://store.apple.com/us/product/M8661LL/B?fnode=MTY1NDA5OQ&mco=MTA4MzU1OTI>
in addition to a Mini DisplayPort to DVI adapter/

Is it possible to use old Apple Flat Panel Display (62 watt power adapter) with MacBookPro 13" Mid-2012 running 10.8.4? Tried mini display to VGA cable

Is it possible to use old Apple Flat Panel Display (62 watt power adapter) with a MacBookPro 13" Mid-2012 laptop? Would like to use larger screen when working at home. I have a mini display port to VGA cable and have tried to hook up the old display but it seems not to work. When I try to activate the screen on the old display-- a window comes up in the MacBookPro and asks me if I want to shut down the computer. What little I have read it that the MacBookPro had Thunderbolt and the old display may not be compatible? Any assistance would be appreciated.

quax88 wrote:
11.09.12 22:16:06,148 ClamXavSentry[286]: scan email files
11.09.12 22:16:06,148 ClamXavSentry[286]: I will quarantine infected files
This doesn't have anything to do with your problem, but it will likely cause other issues with your e-mail.
Here's my standard recommendation concerting the use of A-V software to deal with potentially infected messages:
Never use ClamXav (or any other A-V software) to move (quarantine) or delete e-mail. It will corrupt the mailbox index which could cause loss of other e-mail and other issues with functions such as searching. It may also leave the original e-mail on your ISP's e-mail server and will be re-downloaded to your hard drive the next time you check for new mail.
So, if you choose to "Scan e-mail content for malware and phishing" in the General Preferences, make sure you do not elect to either Quarantine or Delete infected files.
When possibly infected e-mail files are found:
Right-click/Control-click on either the infection or file name in the ClamXav window.
Select "Reveal In Finder" from the pop-up menu.
When the window opens, double-click on the file to open the message in your e-mail client application.
Read the message and if you agree that it is junk/spam/phishing then use the e-mail client's delete button to delete it (this is especially important when the word "Heuristics" appears in the infection name).
If you disagree and choose to retain the message, return to ClamXav and choose "Exclude From Future Scans" from the pop-up menu.
If this is a g-mail account and those messages continue to show up after you have deleted them in the above manner, you may need to log in to webmail using your browser, go to the "All Mail" folder, find the message(s) and use the delete button there to permanently delete them from the server.
To fix the corrupted mailbox index(es), highlight each one that was corrupted and choose Rebuild from the appropriate menu.

VMware Fusion and Apple LED Cinema Display

I have a 2008 MBP and a 27" Apple LED Cinema Display. My OS is 10.7.2.
I am running Windows 7 with the latest updates in VMWare Fusion 4.1.1. I have several issues.
1) When I go to chose my monitor it say Apple LED Cinema Display but "Generic Non-PnP Monitor." I downloaded and installed the boot camp drivers as I understood those contained the drivers for the monitor, but that didn't seem to help. Do I need to have the Boot Camp drivers?
2) When I try to access the Boot Camp Control panel in Windows 7 in Fusion I get "An error occured while tyring to access the startup disk settings. You may not have privileges to change the startup disk." My guess is this is because the Boot Camp drivers are only needed if you actualy run Boot Camp.
3) In Windows I cannot choose the native resolution of the Apple display (2560 x 1440).
4) The resolution ia 1277 x 1234. That is weird.
5) If I minimze the Fusion window and then immediately open it, it looks fine. But if I wait for awhile and open it, the window will be black until I click inside of it.
Something is wrong, Any help in fixing this would be greatly appreciated.
Bryan

you have to separate out what is Fusion and what is Windows native.
Even doing updates to Windows sometimes should not or cannot be done properly in VM.
And there is no way to change the default boot drive - a VM doesn't have access and that is the host OS's job, not the guest's.
Install the latest AMD driver for mobility - and dont' use the "auto detect" - that is not going to work on Apple hardware.
You dont' run Boot Camp. But the Apple drivers and serives needed for hardware support, yes, they aren't running or loaded.

APPLE 30" Cinema Display and ATI Graphics Card compatability

hi all
I have a 2year old APPLE Dual proc G5 PowerMac 2.0mhz (1.5GB Ram) with an ATI graphics Card which is a ATI Radeon 9600XT 128mb ram.
This currently works well dipslaying via a Apple cinema 23" screen. However i would like to upgrade the screen with an Apple 30" display now. Will the current ATI Graphics card support a 30"display or will i need to replace the card on buying a new monitor..
i was looking at potentially a new ATI X1900Xt card.
any experiences and help please ...
Thanks Paul

Your existing card will not run the 30" at full resolution. The ATI X1900 XT won't fit because it is not AGP.
The fastest AGP card for your G5 is the ATI Radeon X800 Mac edition
<http://eshop.macsales.com/item/ATI%20Technologies/100435317/>
It has one DVI dual-link port that will run the 30" display, and one ADC port.

Will apple tv work with a hdmi splitter of some kind ? TV only has 2 hdmi ports and both are in use

will apple tv work with a hdmi splitter of some kind ? TV only has 2 hdmi ports and both are being used .
If splitter will work any recomendations as to best type to use

The Hatter,
I am a novice at Mac so I read all I can. From what I understand the NEC monitors I bought require Display Port for their maximum performance. The GTX 680 only has DVI outputs. Difference from what I understand is larger bandwidth with the DP.
You said I have the 4000 for CUDA. I am not all that familiar with CUDA and when I do read about it I do not understand it.
A concern I have is, that if I connect the 2 high end NEC monitors via the 5770, using it's 2 Display Ports I would have nothing connected to the 4000. Is the 4000 doing anything with nothing connected? I read where in a PC system the 2 cards would interact but in a Mac system they do not.
Bottom line, as I see it, the 4000 will not be useful at all to me, since I want a dual monitor set-up.
So far the 5870 seems the best choice, higher band width than the 5770, and it has 2 Display Ports to optimize the NEC monitors.
I'm not sure how fine I am splitting hairs, nor do I know how important those hairs are. I am just trying to set up a really fast reliable system that will mainly be used for CS6 and LR4. Those NEC monitors are supposed to be top notch.

Clamshell Mode With 30" Apple Cinema HD Display

Hello,
How can I use my 17" MacBook Pro with my 30" Apple Cimema HD Display in clamshell mode (with lid closed). I can only use it in clamshell mode when the AC adapter is plugged in. When I try to wake the computer from battery, it turns on but then goes right back to sleep mode.
Thanks in advance,
Edwin

That's normal behaviour… clamshell mode will not work when your MBP is running without AC power.

Can a laptop with VGA output use the Apple Thunderbolt 27" display?

I bought a 2011 Macbook Air and I'm thinking about upgrading my office monitor. The new Apple Thunderbolt 27" display comes to mind.
However, I also have a Lenovo X201 with VGA output, which I would also like to connect to the Apple Thunderbolt 27" display sporadically.
Will the VGA to mini-display port adapter work? If not, does there exist a VGA to mini-display port converter that will work and if so which one?

You are thinking of that adapter backwards. It is not VGA to MDP but is "Mini DisplayPort to VGA Adapter". This means it will take video out of a a MDP connection and convert it to a VGA connection. It will not go the other direction like you need.
Sorry but that Lenovo just doesn't have the ability to connect to the new display. If it had a HDMI video port like some other Lenovo models, you could adapt from that but I don't know of any VGA to Mini-DisplayPort/ThunderBolt adapters.
Even if you were to use such an adapter, the video card in that laptop couldn't drive a 27" display at the native resolution so it would look very bad.
One other option would be to use the Lenovo X200 docking station which has a full sized Display Port. You would have to use a Display Port to Mini Display port adapter then you could attach the TB cable to it. There is also a USB video replicator that has a DVI-I output then then yet another adapter to get to Mini-Display.
However, both of these options would still be limited by the graphics card at 1920x1080 so it still wouldn't look good.

Will Apple's 30 " Display overheat a 17" PB?

Similar Messages

Maybe you are looking for