Will Appletv connect to Sony tv RM-YDO14

Will AppleTV connect to Sony TV model RM-YDO14?  Have tried all 3 HDMI inputs and I can't get the Apple setup screen.  Is there more than one type of HDMi cable?

That's too bad.  Read the article from which the thread was started and follow the troubleshooting steps provided.

Similar Messages

  • Mac will not connect to sony or vizio hdtv.

    I've been using a rocketfish hdmi adapter for a month with no problems connecting to both of my tv's.  Now I can't connect with either.  Help!

    Sounds like you may have downloaded a Trojan such as the one called 'DNSChanger' or 'OSZ.RSPlug', which can alter the DNS settings of your network connection. This particular Trojan can be inadvertently installed if you have come across certain Quicktime movies where got a window stating that you have to download and install a particular codec in order to see the video.
    If you have agreed to that installation, your system can be infected and your DNS settings altered, which results in your system using the wrong DNS servers, which can slow web surfing to a crawl.
    This can be fixed by downloading and running a freeware utility called DNSChanger Removal Tool which you can download from here:
    http://www.versiontracker.com/dyn/moreinfo/macosx/33696
    Once you have run that utility you have to re-boot your Mac, then reset Safari, and re-enter your DNS settings in System Preferences/Network.

  • My sony ereader will not connect to Adobe Digital Editions

    My sony ereader will not connect to Adobe Digital Editions even though my computer is authorized

    When you register your ereader with SONY, you'll need to make sure that the
    Reader Library entries were created on your hard drive for the ereader to
    work properly.  Only some of them are supported by ADE.  There's a list in
    the HELP section of ADE.
    Also, there have been some problems with the PRS-T1 model.
    Hope this helps!
    =============

  • The light on the front of my Appletv keeps blinking and it will not connect

    THe light on my Appletv is blinking and it will not connect.

    My Apple TV version 3 shut down a few days ago in the middle of watching a movie and it was flashing continuously
    I could not get it to work at all I tried resetting it,  all I got was a Macintosh apple logo on my TV screen
    and nothing else.  I had no connection to my iMac with Air Parrot software, or from my new macbook Air with Airplay.
    Airplay was no longer visible to select on my macbook Air.
    So I connected it to my Mac desktop, using USB and a power cord, to reset it back to factory defaults, as directed by Apple.
    This took approx 90 mins to complete, then I had to set it up again…….BUT I cannot get it to work it refuses to 
    accept any password, and I have updated to a new password today but it will not accept it….
    I presumed,  I use the same Apple ID username & password that I use for iTunes and iMac etc for my Apple TV also ?
    or does Apple TV have a different username & password ?
    any ideas
    Thanks
    Terry

  • My iphone 6 will not connect to the sony srs-x5 bluetooth wireless speaker.

    my iphone 6 will not connect to the sony srs-x5 bluetooth wireless speaker.

    There ware some issues with iOS 8, 8.0.1, and 8.0.2, regarding bluetooth. Have you updated to 8.1? Forget the speaker in bluetooth settings, and update. If you are up to 8.1, try to forget the speaker, and reset all settings and attempt to pair again.

  • My sony DCR-SR68 will not connect, stuck on "preparing"

    I have tried to connect my sony DCR-SR68 via USB cable, the camera displays proper screen (to choose USB connection for the internal HD), I choose the USB connect, then the screen stays stuck on "preparing."
    It's supposed to be communicating with the computer, but it stays like this for well beyond 30 minutes.

    If you are attempting to use the camera with iMovie Apple publishes iMovie ’11 Supported Cameras this located by clicking
    http://help.apple.com/imovie/cameras/en/index.html?lang=en_US
    In checking it appears your camera is supported, now all you need to do is learn to use iMovie. I would recommend getting started by clicking
    https://www.apple.com/support/mac-apps/imovie/

  • My AppleTV will not connect to Wi-Fi even after restore.

    I have access to two different Wi-Fi networks in my house and it will connect to neither. I connected it to my MacBook Pro and did the full restore through iTunes, but it still doesn't work. Every other Apple/iOs device in the house connects, although my wife's MBP recently had an issue with Wi-Fi and it still acts up sometimes. Any advice? Is there something I can do to manually enter an IP address, etc.? Connecting it to Ethernet is not an option.

    P.S. - The ATV can see the Wi-Fi networks, but will not connect after I enter my password...

  • AppleTV Connected/Won't Turn On

    I'm trying to connect and use AppleTV on my SONY TV.  All connections were made as per instructions.  Using the AppleTV Remote, I can't seem to turn on AppleTV and have it show on my SONY Screen.

    Is the white LED on the front of the AppleTV  illuminated? If it's off you won't be able to see it. The LED is an AppleTV's only overt sign of life, other than the signal carried by its HDMI cable to your TV. VoiceOver audio will speak to you and provide setup instructions, even if you can't see any video.
    It sounds as though you may need to tell your TV to use that input.
    If it's brand new you can certainly contact Apple and have them walk you through its setup. It's free. To contact Apple use the Contact Us link below.

  • How to connect a Sony Bravia TV to the internet through your Airport network

    Since it took me a lot of time to figure out how to connect my Sony Bravia TV to the internet through my Airport network, I better share how to do it. Hopefully saving others a lot of time.
    My 32EX600 Sony Bravia TV is Ethernet connected to my Mac Mini, which is part of my Airport network, together with another Mac, an Airport Extreme Base Station and an ADSL modem/router. Moreover, the Mac Mini is connected to the TV by HDMI.
    Whatever I tried in the TV’s Wired Network Set-up (Auto, or Manual with manual IP, Subnet Mask, Default Gateway and DNS IPs), I couldn’t get it right. Cable Connection and Local Access were mostly OK, Internet Access always Failed.
    The solution lies in the Sharing panel of the System Preferences of the Mac Mini. In the Internet Sharing item of that panel, you should choose to “share your internet connection from WiFi to computers (the TV in this case) using Ethernet“, and NOT (as I had chosen before and seemed so obvious) “share your internet connection from Airport to computers using Ethernet“. After that change, the Bravia Network Set-up, using the Wired and Auto options, flawlessly connected to the internet. No expensive (Sony) WiFi USB dongle needed.

    I have now had a detailed reply from Sony Europe and the way to do this is to:
    1.       Press Home on the TV Setup
    2.       Use the right and left arrow to select Setting.
    3.       Use the up and down to select Network, press Enter.
    4.       Select Network Setup.
    5.       Select Wireless setup.
    6.       Select Scan
    7.       Select your network
    8.       A new screen will appear asking for entering the security key.
    9.       Enter your WPA2 key.
    10.   Select Enter.
    11.   It will take you back to the same screen asking for entering the
    security key.
    12.   Press the right arrow.
    13.   Select Auto.
    14.   Press the right arrow.
    15.   Select Save and connect.
    These instructions are not the same as shown on the TV but they worked fine for me so they may help others with a similar problem.

  • Apple TV (1st gen) will not connect to iTunes

    I am at wit's end. Until a couple of days ago, my 1st gen Apple TV connected fine to iTunes. Now, it will not connect no matter what. I have tried the following:
    1) restart both ATV and my machine (Win 7 running iTunes 10.7)
    2) restored ATV factory settings and reinstalled software
    3) hard-wire via ethernet to my computer (which some articles seemed to indicate should work - nothing happened)
    4) hard-wired both my cpu and ATV to a router - nothing shows up
    5) removed and reinstalled all Apple programs, including iTunes, QT and ancillary
    6) vaired between hard-wired internet connection and wireless for ATV
    7) did everything on this page, including open ports manually http://support.apple.com/kb/TS1453
    Most frustrating of all, my wife sees the device instantly in her iTunes. AGHH!

    Same thing happened to me, starting right after I  updated the Apple TV firmware. I restarted both devices to no avail. I can, however, play my itunes library content from the apple TV's "computer" app. So there must be some kind of connection. What I've lost is the ability to stream music from iTunes using AppleTV as an "airplay" device.

  • New Video iPod will not connect

    I have a new video ipod that will connect on one computer but not the one I want to use. I have reloaded itunes several times and checked firewall. When I plug the ipod in the computer makes three dings. Is this an error code of some type? It will not show up in diagnostics and after trying it shuts down internet connection until computer is re-booted. It connects fine on the other computer. Has anyone got any answers? I have tried different plugs and it shows to charge just will not connect.
    video   Windows XP   Sony Media Station Both computers

    You want to check and see if the other computer has usb 2.0 first.
    If it does try to reset the ipod while it is plugged into the computer. Reset is the menu and the center button on the ipod. Also make sure the hold switch is all white.
    Also you want to make you that you try different usb ports.
    If that doesn't work use msconfig type that into the search here on the support page let me know if this works.

  • 2009 24-inch iMac 3.06GHz (EMC no. 2267).   I don't get any audio when connecting my Sony HD TV to my iMac via mini DisplayPort. Is there a fix or hardware upgrade?  I'm using a Kanex Mini DisplayPort to HDMI cable w/ audio support.

    2009 24-inch iMac 3.06GHz (EMC no. 2267).   I don't get any audio when connecting my Sony HD TV to my iMac via mini DisplayPort. Is there a fix or hardware upgrade?  I'm using a Kanex Mini DisplayPort to HDMI cable w/ audio support.

    You can connect the audio from your iMac to your TV using a mini jack (like headphones plug) to rca (regular red and white audio connectors used on every TV,DVD, etc) cable.
    On your TV, you need to be able to set the audio for the HDMI input you will use to "analog" and connect the rca end of the cable to the analog inputs on your TV.

  • What cable do I need to connect my sony video camcorder to my macpro

    I need to purchase a firewire cable that will connect my Sony min tape camcorder to my Mac Pro laptop and I am not sure what to get.

    Look at your Sony camera or read the instructions for same.  It probably will be a mini USB connector.  If it is, you will need a mini USB/USB wire.
    Ciao.

  • MBP upgraded to Yosemite and now will not connect to Internet using a Cisco router

    I Upgraded my MBP mid 2010 to Yosemite and now it will not connect to Internet using a system that involves typing in my user name and password in an auto pop up window provided by Cisco security systems. Before, using Mavericks, it worked perfectly: boot up MBP and the Cisco pop up auto loaded. Typed it my password and hey presto, connected to Internet. Now, zilch. There is nothing wrong with the Cisco cos my iPad connects ok, as do both my iPhone's.
    the problem is with Yosemite therefore. Please help. I tried all the usual diags, etc to no avail.
    Message was edited by: AWAC

    Sounds like there could be some kind of compatibility issue between ICS and this Bluetooth device of yours. Is there any compatibility info from the manufacturer about which Android versions that's being supported?
     - Community Manager Sony Xperia Support Forum
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • Can I connect 2 sony bravia's, a sony home theatre, 2 macbooks, 2 ipads, 3 iphones and a dell laptop and stream media from my apple devices to my tv?

    Can I connect 2 sony bravia's, a sony home theatre, 2 macbooks, 2 ipads, 3 iphones and a dell laptop and stream media from my apple devices to my tv? I have a sony bravia 600 series and 700 series and a home theatre( sony 7100 series)

    The only way to stream directly to your TV would be if it is an AirPlay-enabled device.
    There are many AirPlay-enabled devices but I am not familiar with Sony's products. If yours do not specifically indicate AirPlay capability, then you need an AirPlay-enabled device such as an AppleTV connected to your Sony TV or Sony AVR.

Maybe you are looking for

  • Itunes wont open and quicktime will not install. help?

    someone please help. my itunes will not open since i preformed an update (it has not been updated for a few years). i have noticed i no longer have quicktime on my laptop but cant re-install. i get to the 'welcome to quicktime 7 installer' screen, pr

  • DVD encoded video and audio progressively get out of sync

    Hi Compressor professionados, I've been trying to finalise a DVD I’m creating but keep having the same show-stopping problem where I just can't get the timing of the audio and video right after encoding it to MPEG-2/ac3 for DVD Studio Pro. When I lay

  • IDVD 08 insist to transform NTSC 720 x 480 files in 640 x 480!!!

    iDVD 08 insist to burn NTSC 720 x 480 files in 640 x 480 And of course smaller with a black box- I've tried everything in vain. It's the same If I select widescreen or 4/3 menus- My files are mp4 H.264 files. I'm quite desperate since I don't get WHY

  • Business Graph Giving Dump.

    Hello Experts, I want to display some data in Business Graph . So i add the UI element in the view also created some node and attributes and bind it with the business graph properties (but not yet do any coding for fetching the data ). But after that

  • User Exit with MD01 screen

    Hi All, In MD01 screen, you can find a field called <u>'User exit Parameter</u>". The user will have 3 options to input the data into this field. 1.  The User can enter single value... ex: E01     The user exit will execute the MRP Run based on this