Will Authortime shared assets be cached when using Incremental Compilation?

I'm learning about some new CS5.5 features (also found in CS6).
I have some projects with extremely large filesizes because of embedded videos (its not an option to break these out externally - long story). Some compiled SWFs can reach 120MB+
CS5.5 adds a feature where you can share an asset between two FLAs. My thought is to put each embedded videos in their own separate FLA files to speed up saving and editing.
Secondly, CS5.5 adds a feature called "Incremental Compilation" - you can set a cache size in the "Publish Cache" Preference setting. I haven't tried this yet, but I would think it would greatly improve rendering time when testing this movie. I have a machine with 16GB of RAM.
My question is if I use the Shared Asset feature, will it still be cached by incremental compilation?

Maybe something interesting...
When looking at article http://support.microsoft.com/kb/982697/en-us
I saw that Outlook 2013 by default caches everything and that's what I wanted. I tested however adding this regkey to see what happened and after that the email shows up in the mailboxes... Somehow the mail from shared mailboxes doesn't want to be
cached...
Does anyone know what this could be? I want everything to be cached, also the shared mailboxes but somehow this doesn't work and it does when using Outlook 2010....

Similar Messages

Drop down menus on iPad, the first selection in the drop down will not load as a selection when using safari, what can I do?

Drop down menus on iPad, the first selection in the drop down will not load as a selection when using safari, what can I do? I use this for my mobile, on-site auto repair business and not being able to call up repair and diagnostic info and reference for some cars is troublesome for sure. It works fine on the computer and I have installed a remote desktop app as a workaround but it is unreliable because the desktop is not business dedicated and may be off or in use at the time. So is there a known fix for this?
Let me paint a more descriptive picture, visualize 4 drop down selection menus, first one is for year, next one is for make, 3rd one is model and the last one is for engine size/type. If I wanted to choose a 2012 vehicle it wont work because it is the top selection on the list. This can be forced by selecting any other year and then coming back to 2012. Ok fine, but then let's say I wanted to choose Acura as the make, well it won't take it because again it's the top selection. Again you work around it be selecting any other make and coming back to Acura. Ok now select the model, same trend follows. But now since most Acura vehicles come with dedicated engines and no optional engines I have only 1 selection in that final drop down menu and it will not take my selection and therefore never let me proceed to the info I need.
This is also true when ordering parts from my wholesaler's website, they use drop downs and I can only get to that last drop down and then I'm stuck. This is blindingly frustrating, what options do I have. I'm not opposed to any avenue at this point.

Did you ever figure this out? I bought my iPad last week to use in my business as well. I assume you are trying to use alldata? That is where I noticed this same issue. I had problems with identifix working with safari but downloaded a different browser and that works fine. Alldata does not work with either browser. The main difference is that on identifix if there is only one engine selection, it automatically selects the only option and continues to the home page. With alldata you have to make the selection manually even if there is only one option. Honestly if I can't get this to work I am going to return the iPad as it looses a significant amount of usefulness to men

When having sync will I loose my original passwords when using another computer to log ?

With sync will I loose my original passwords when using another computer to log ?

You can copy your apps over from your old computer or re-download them for free on the new computer : http://support.apple.com/kb/HT2519

USB mouse will not initialise on boot-up when used via Dynadock on Satellite Pro U200

The USB mouse will not initialize on boot-up when used via Dynadock on Satellite Pro U200. If the mouse is reseated on the Dynadock it works fine. I am using a Kensington Valuoptical USB mouse. I have tried alternative kensington mouse and had the same problem. Can anyone advise how to resolve this issue?

Hi Jeremy
Unfortunately I have no solution for your issue but it can also be some technical limitation. I am also interesting to buy such docking station and I would like to know if there is the same problem with external HDD or USB memory sticks.

File sharing setup causing static when using Itunes

We have 2 ibook g4's, and use an airport express to play music on our creature speakers. It's worked great up till now. We setup file sharing on both laptops ... and ever since we only get static when we try playing music in itunes.
You can hear the music, but it's very faint under the static
Speakers work fine when used with our dvd player etc
Have turned off file sharing with no change
Rebooted both machines
We both use the latest itunes & osx vers
Any help would be greatly appreciated!!
cheers
FF
ibook g4 Mac OS X (10.4.8)
ibook g4 Mac OS X (10.4.8)

appears itunes is not the culprit, as I've used airtunes with other apps with the same result. will repost this under another category.

Shared PC stuff dissappears when using Airport anything.

I have a cable modem hooked to a Linksys router and switch. Several PC's sharing disks and printers are hooked to the switch. When I plug my Mac directly into the switch it 'sees' the shared disks on the PC's but not the printer (another topic). When I unplug the Mac and put the same wire into my new Airport Extreme instead, the Mac hooks up to the internet fine, but the shared disks from the PC's are gone. Is it a port issue and on the AE or the Linksys? I swear I'm a dummy at this.
I love my new Macbook Pro, but there are still a few things to do.
1. Can see shared pc drives but not if using Airport Extreme or Express to connect to my home network.
2. USB drive works only when plugged into Mac. Not when plugged into PC or Airport Extreme.
3. Shared printers on the PC's can't be found by the Mac no matter what I try.
Maybe this isn't all for this topic, but then again, maybe they are related.
Mac newbie, MissMyApple][+ (it's in a box in the attic)
Thanks in advance for any help.

When I unplug the Mac and put the same wire into my new Airport Extreme instead, the Mac hooks up to the internet fine, but the shared disks from the PC's are gone. Is it a port issue and on the AE or the Linksys?
In this network configuration, you, effectively, have two routers, the Linksys and the AEBS...which will create two networks, and why your Mac can't "see" the PCs. To fix this, you just need to set up the AEBS as a bridge so that it acts like a wireless access point.
To set up the AEBS as a bridge, temporarily connect your computer directly (using an Ethernet cable) to one of the LAN port of the AEBS, and then, using the AirPort Utility (found in /Applications/Utilities), make these settings:
Internet - Internet Connection tab
- Connection Sharing: Act as a bridge
- Click Update to apply the new settings.

Form will not open with adobe reader when using chrome and mozilla

The form opens fine in internet explorer, but when opened with chrome and mozilla it says that parts of the document could not be displayed and the 'submit form' and 'print' functions do not work? how do I get it so that the forms open with adobe reader as a pdf automatically instead of opening in another search engine tab?
Thanks

Hi
Chrome and Firefox use their default PDF viewers instead of Adobe Acrobat / Reader and hence most PDFs will not be fully functional in those.
For that you just need to change the settings :-
http://helpx.adobe.com/livecycle/kb/xfa-forms-firefox-chrome.html
Thanks and Regards
Rahul JOshi

Can I use Intel 815EP AGP 4X Pentium and plug in 5 Nos NI 6002 PCI counter Timer cards, instead of going for expensive PXI based solution? Hope there will be no degradation in performance - when used for constructing an Energy Meter test Bench.

I was recommended to buy NI 6002 with PXI series, 5 Nos cards($875x 5 nos), and additionally a PXI rack costing about $ 2195 + some min--- card to interface with the computer costing another $ 875. Compare this with $ 675 x 5 Nos for 5 Nos PCI based NI 6002 + some cablesa nd connectors for synchronisation.
First option is extremely expensive. But NI marketin manager will be glad that he sold more harware. But I want the truth. Why can't Intel 815 Pentium board be used?

I am addressing the question if using PCI-6602s instead of using PXI-6602s will affect the performance, and the answer is NO. 6602 counter/timer devices comes in two different form factors, PXI/Compac PCI and PCI. The accuracy and performance is the same for both the PXI and PCI 6602s. However, using PXI solution will allow users an easier time with synchronization since that is the provided in the backplane of the PXI chassis. Additionally, if you ever need a higher accuracy solution you can add the 6608 device which has 75 parts per billion ppb vs 50 ppm of the 6602 devices. With 6608 plugged in the second slot of the PXI chassis (the one next to the controller), the high accuracy timebase is automatically shared acrossed the backplane of the PXI chassis which mean
s that other 6602 devices in the chassis will share the same accuracy of the 6608. If the difference in the accuracy is not a concern and you are currently not ready to invest in the PXI platform, then you can go with the PCI 6602 devices.
Best Regards,
June Zhu
National Instruments
Digital and Timing Product Support Engineer

Will the memory leak for queue when used in producer and consumer mode in DAQ to transfer different sized array.

In the data acquisition, I use one loop to poll data from hardware, another loop to receive the data from polling loop sent by queue.
But everytime the size of the transferred data array may not be the same, so the system may assign different array size and recycle very frequently.
Will it cost memory leak. Or will it slow down the performance, since the array size is not fixed, so every time need to create a new sized array.
Any suggestion or better method.
Solved!
Go to Solution.

As i understand your description, your DAQ-loop acquires data with the setting '-1' for samples to read at the DAQmx read function. This results in the different array sizes.
Passing those arrays directly to a queue is valid and it does not have significant drawback in performance (at least as far as i know) and it definetly does not leak memory.
So the question is more or less:
Is it valid that your consumer receives different array sizes for analysis? How does your consumer handle those arrays?
hope this helps,
Norbert
CEO: What exactly is stopping us from doing this?
Expert: Geometry
Marketing Manager: Just ignore it.

Firefox 30 will not launch the ICA Application when using Citrix receiver 4

When trying to launch a Citrix Application with Firefox version 30 it will not launch.
There is no error message appears.
If, you change back to Firefox 29 all works without issues.
How can you get the new version to work Citrix Applciations and Citrix receiver 4.1

The fix for me was to update to the latest version of Citrix Receiver (4.1.0.56461) and then change the plugin settings for Citrix in the about:addons sections from "ask to activate" to "always activate". All working again for me now :)

When useing Adobe Flash in for example youtube. The player will get more and more delays when using the player tools untill firefox freezes for about 10 sec.

After freezing the player's delay will be reset to 0. I can replicate this "crash" by just moving my mouse on the youtube progress bar and see the delay building up. This only happens when firefox is my main window.

hello, there are some reports by users that comodo products might not work well with the protected mode for firefox that adobe has introduced in its flash plugin since version 11.3.
http://forums.adobe.com/thread/1074253
http://forums.comodo.com/empty-t85399.0.html
please make sure that firefox.exe, plugin-container.exe and FlashPlayerPlugin_*.exe aren't blocked or sandboxed in any way by your security software or in case this doesn't work either try switching your AV provider (I'd recommend microsoft's security essentials, it is quite reliable and lightweight) or [https://support.mozilla.org/en-US/kb/flash-113-doesnt-load-video-firefox#w_solution-2-downgrade-flash downgrade to flash version 10.3].

IPad will no longer sync with iPhone when using iMessages

I'm not sure what happened but my iPad no longer syncing iMessages with my iPhone. All have been signed in with Apple ID, all have the same telephone number and email address selected. I'm at loss what to do. Any suggestions?

I am having the same issue with my ipad 3 with retina display and my iphone 5 (both iOS 8.1.2). Text messages received on my iphone will be forwarded to my ipad, however imessages will not. Also, some contacts that i can Imessage on my iphone (blue contacts) show up as grey, red or green on my ipad and it wont allow me to imessage them anymore.
I have tired all of the apple support remedies to no avail, including a full reset of both devices. No luck yet. I hope someone can figure this out for both our sakes.

My videos will not run on firefox but when using Explorer everything runs fine. Why would this happen. Is there a fix or setting wrong when I use your service.

I am not sure what other details are needed. Please let me know what specifics you might need.

In order to be able to find the correct solution to your problem, we require some more non-personal information from you. Please do the following:
*Click the Firefox button at the top left, then click the ''Help'' menu and select ''Troubleshooting Information'' from the submenu. If you don't have a Firefox button, click the Help menu at the top and select ''Troubleshooting Information'' from the menu.
Now, a new tab containing your troubleshooting information should open.
*At the top of the page, you should see a button that says "Copy text to clipboard". Click it.
*Now, go back to your forum post and click inside the reply box. Press Ctrl+V to paste all the information you copied into the forum post.
If you need further information about the Troubleshooting information page, please read the article [[Use the Troubleshooting Information page to help fix Firefox issues]].
Thanks in advance for your help!

How can I monitor the Session Cache when using HTTP Session-Replication?

I want to see the session cache content

To see the list of session IDs in the cache you can iterate over the keys of the cache returned from the following code:
NamedCache cacheCatalog = CacheFactory.getReplicatedCacheService("$FilterService$").ensureCache("CoherenceSession.CATALOG", getClass().getClassLoader());Then to see the contents of a session you can take a look a the cache returned from the following code:
String sId = // keys from cacheCatalog
NamedCache cacheDetails = cacheCatalog.getCacheService().ensureCache(sId, getClass().getClassLoader());Hope this helps.
We have received your request for a development license and we hould have ti out to you today.
Later,
Rob Misek
Tangosol, Inc.
Coherence: Cluster your Work. Work your Cluster.

Some of my CPU cores will go up to 96 degrees when using iMovie. The Mac will get really loud, too. Should I be concerned?

It will also do this on other intensive applications. But, even if I exit out iMovie and nothing is running, it will randomly start churning up.

Yeah, that's why they're called CPU-intensive programs.
You can put a laptop stand or pad underneath to improve ventilation and cooling. Some models even come with extra fans to enhance the process.

Will Authortime shared assets be cached when using Incremental Compilation?

Similar Messages

Maybe you are looking for