Will BC eventually include Coldfusion and/or Flex?
My understanding is that BC web sites are .NET based. Will BC sites eventually include Coldfusion and/or Flex servers?
Having spent many hours learning and building rich Internet applications using Coldfusion and Flex, hard to believe an Adobe-hosted web site system (BC) would be solely .NET based.
Hi Ahande2!
Unfortunately not in the near future and at this stage.
The BC Sytstem is a SAAS (Software as a Service) and this system is a .net based system.
You have NO access to server side code so you can not run any PHP, Java, Coldfusion, .net code on your sites.
If you need any custom functionality etc you can use the ever expanding API of the system.
http://kb.worldsecuresystems.com/635/bc_635.html?bc-partner
Kind regards,
-Sidney
Similar Messages
-
PSE 8.0 Will Not Open (Including Editor and Organizer)
I have been using PSE 8.0 for three or four years now, and I have never experienced any problems with it. Today, after installed a Wacom Intuos Creative Pen Tablet, my PSE 8.0 would not open-- nor would Editor and Organizer. I tried uninstalling and reinstalling the program, renaming certain files (as read in other answers), creating shortcuts to bypass the Welcome Screen (which also will not appear), among other solutions that I read about for similar problems. Whenever I attempt to open Organizer, a crash report appears, stating that the program has quit unexpectedly--that's all it says. If I try to open PSE 8 or Editor, the circle next to my cursor appears for a moment, but soon it disappears without a single pop-up or explanation as to why the program won't open. Since I cannot access the Welcome Screen, I cannot locate the Preference file to change the name/delete it. If it matters, I use Windows 7.
Any and all help is appreciated. I'm going a bit insane without my lovely Photoshop to doodle in. ;n;
Thank you,
~ MongooseEDIT: I found the Preferences within the PSE folder, and I renamed it; afterwards, I tried to open PSE again. It reset the Preferences, yet it is still telling me that PSE has unexpectedly quit. /EDIT
I went into the PSE folder and attempted the "three finger salute" while clicking on Organizer, but all it brought up were the Organizer Properties.
Also, within the past hour, PSE has been randomly popping multiple times up to inform me that it unexpectedly quit, yet I have not tried to open it recently. I am not sure if that is important or not. -
Flex and ColdFusion and session facade?
I want to deploy a flex application on an existing ColdFusion
server. This server is already in production and uses a root
Application.cfc to set session variables as well as authenticate
the user to AD with getAuthUser. When I deploy my flex application,
it fails because of the OnRequestStart cfcomponent within
Application.cfc. I am wondering if this would be proper use of
session facade? How do I best encapsulate session variables from
the root Application.cfc within my new flex application? Basically
I will need to follow the same authentication and cfset session
guidelines that all of my other CF applications use, and my flex
app needs to have theses session variables available to it, but I
am not sure the best approach. Any insight is welcome.Did you enable session management in the Application.cfc or
Application.cfm? -
Revision: 2200
Author: [email protected]
Date: 2008-06-24 07:46:04 -0700 (Tue, 24 Jun 2008)
Log Message:
The main package will now also include the ja swc's and properties files.
-it will not include the samples, these will still be in the ja zip
bug:http://bugs.adobe.com/jira/browse/SDK-15852
Ticket Links:
http://bugs.adobe.com/jira/browse/SDK-15852
Modified Paths:
flex/sdk/branches/3.0.x/build.xmlHi,
First up thanks for helping out, I really appreciate it.
Is there a way to change that or should I simply add the file to the Classpath?
The config file at present sits in c:\Temp\ESFGFL\servicelayer\config\maysqlconfig.properties with the code in the servicelayer directory.
My classpath is set as .;C:\Program Files\Java\jre6\lib\ext\QTJava.zip;C:\Program Files\Java\jre6\lib\javamail-1.4.2\mail.jar
What do I need to change here? Ultimately te code will be on a servera nd so will the config file but learning some lessons by testing locally is proving invaluable.
Thanks again for your help
nathj -
Need to encrypt string in ColdFusion and Decrypt in Flex
My company is developing a standalone, offline Flex/AIR application. When users of the Flex/AIR app. want to activate the application, we will send them an activation file that contains an encrypted string. The string will hold the unique set-up data for the specific copy of the Flex/AIR app. The activation file will need to be generated on our central system which is written in ColdFusion. The Flex/AIR application must read the file and decrypt the string.
Are there any encryption/decryption options that are compatible with ColdFusion 8 and Flex 4?
Thanks.
P.S. The Flex/AIR app. runs offline, so I am not referring to encryption of communications between a ColdFusion server and Flex.srikanth n wrote:
> Can anybody help me to resolve this issue.
>
> Thanks in advance.
>
>
My first thought is CF's list functions. You can declare any
character(s) you want to be a list delimiter. In you example
I would
use '-' and 'x' as the delimiter. A couple of examples.
<cfset phoneString = '123-456-7890 x1234'>
<cfset delimList = '-x '>
<cfoutput>
Areacode: #listFirst(phoneString,delimList)#<br/>
Exchange: #listGetAt(phoneString,2,delimList)#<br/>
Number: #listGetAt(phoneString,3,delimList)#<br/>
Extension: #listLast(phoneString,delimList)#
</cfoutput> -
Filling up a pdf form which I received as email. I opened it on my adobe reader 11 and filled up the highlighted fields. Yet when I click on the send via mail it says changes will not be included. How do I send the form with changes?
The add annotations field shows as not allowed in the security options. So how do I send this form back with the changes??I think you you need to click 'save' first, then it is saved to acrobat, where it will prompt to send.
-
Some applications are not opening, including Mail and Word. Clicking on the icon stirs it on the dock, but will not open it. Any suggestions? Thank you!
Ok, that's plenty of space.
Check the S.M.A.R.T. status on your HD: Boot from install disc (insert disc > restart > immediately hold down the c key and keep holding it until you see “Preparing Installation”) > at first screen select the language and click Continue > click on the Utilities Menu in the menu bar > select Disk Utility > select your HD in the panel on the left side (the name of the HD’s manufacturer and the model number, usually the top item in the list) > look at the bottom of the main window next to S.M.A.R.T. status and see if it says “Verified” (good) or something more ominous like “Failing.”
If S.M.A.R.T. status is "Verified," run Repair Disk > click Repair Disk at bottom of main window. Run this at least twice, and keep running it until it says “appears ok” twice in a row. If that doesn’t happen, you may need a stronger utility (such as DriveGenius, TechToolPro, DiskWarrior) or if the directory is damaged beyond repair, you may need to reinstall the OS, or you may have a damaged HD which will need to be replaced (repair utilities can only repair the directory structure, not the HD itself). When this is finished, quit Disk Utility, quit the installer, and restart. Once booted normally, go to Applications > Utilities > Disk Utility and run Repair Permissions. -
We now use Acrobat xi for special active forms we created that include certifications and signature fields, some of the forms are programmed to create other forms, will we have a problem upgrading to DC
Our users use a form template to create other adobe forms with calculated fields, signature fields (using digital signatures)
, and buttons. Will we be able to continue developing these forms if we upgrade to Acrobat DC?Hi Alex ,
In general ,you would not have any issues and problems moving to Acrobat DC .It has a different user interface and with more enhanced features .
You would be able to develop the kind of forms you are referring to .
You could refer to the following document to get more information about Acrobat DC .
FAQ | Adobe Acrobat DC
If in case you are referring to any particular issue or problem or if you face any regarding Acrobat DC ,we are always here to help you with that .
Please feel free to write us back .
Regards
Sukrit Dhingra -
Does anyone know how to burn a CD+G (karaoke CD) onto a Mac so that I can then burn it onto a CD to use in my karaoke machine that will include lyrics and songs?
You already have a CD+G disc.
You cannot make another as it is a violation of copyright. -
Will the Time Warp effect be eventually included back?
Dear anybody on behalf of Adobe Systems Inc.,
would you be so kind to give a clear answer if the Time Warp effect will be included into Premiere Pro back?
I've just started Premiere Pro CS5 exploration and realise that it's TOO early to switch to. And one of the reason is the Time Warp effect abscence...
I rummaged plenty of Internet pages but was unable to find unambiguous answer 'Yes' or 'No'...
Changing just clip speed gives quite a poor result (first and foremost I mean a movie look).
Discussions about product advantages in general have little sense if it doesn't provide high quality output.
No one of viewers is interested in if I was enjoying with a software while I was composing unprofessional looking film...
Thanks forwardfunction(){return A.apply(null,[this].concat($A(arguments)))}
Todd_Kopriva wrote:
> 1. The official feature-request/bug-report form DOES NOT provide Adobe feedback...
That's not a good assumption.
Well, let's have a look at the form itself: http://https://www.adobe.com/cfusion/mmform/index.cfm?name=wishform
It says (quote):
function(){return A.apply(null,[this].concat($A(arguments)))}
We normally do not send personal replies to feature requests or bug reports.
Having read those words, I should assume I would obviously get the answer on my question, won't it?
ON BALANCE (too many mere words have already been said...).
The Time Warp effect will NEVER be included back into Premiere Pro - it was deliberate marketing decision to exclude it.
Thanks for your time -
Url will use to include in crawl rules settings and in content source
HI
i have a internet application and i want to add some urls to crawl rules to not display in search results.
below is alternate access mappings settings , which has an url for Default zone , and one for Intranet zone
which url i will use to include in crawl rules settings and in content source
adilHi,
As I understand, you want to know which Url of the application should be added to the crawl rules setting and content
source.
I recommend you to use default Url.
If you use non-Default zone Url, it will impact at query time by crawling the non-Default zone, because the query processor
attempts to translate the URL to the Default zone's Public URL before processing the query.
The article below is about Alternate Access Mappings (AAMs) *Explained.
http://blogs.msdn.com/b/sharepoint_strategery/archive/2013/05/27/alternate-access-mappings-explained.aspx
Best regards
Sara Fan
TechNet Community Support -
Adobe Dreamweaver CS3 with ASP coldfusion and PHP search?
I am working through Adobe Dreamweaver CS3 with ASP
coldfusion and PHP with the intent of creating a data base site
that primarily requires a search engine on the index page. The
search page in the book uses specific search criteria ensuring that
there will always be a match to the data base but I need to create
an input text field search engine. My Q, if there is no data within
the data base that match the variable, will it return with an error
requiring an argument in the code to respond to no matching data.
Hopefully there are comprehensive online recourses for these search
engines as they are so common. I am a complete newby to all aspects
of web development and code so it will need to be a thorough
explanation, an idiots guide. ANY HELP GREATLY APPRECIATEDRob,
Let me try to answer your questions, understanding that my
answers are laced with my experience and therefore my bias.
1. For the most part the SQL that you write for Access, MS
SQL or MySQL is going to be the same. I won't make that claim about
Oracle or PostgreSQL because I have limited or no experience in
those areas. To be sure when you head down the road with any DBMS
there are finer points on 'value added' features (to over simplify
things like MS SQL's Transact SQL), but for the most part when you
are pulling out, inserting or deleting records the SQL that you
write will be the same. In fact, I don't think I had to make any of
the SQL in the book different to deal with the back end db.
2. As for your host steering you away from MySQL, I don't
know why that would be. It is MUCH more stable and robust than
Access for web development. My research showed that you can use
MySQL just fine with ASP though that clearly wouldn't be
Microsoft's first choice.
3. A quick aside, the fact that you are building ASP on a Mac
would seem to indicate that you are developing on your production
server. That's never a good idea. Go local if you can. If you have
a newer Intel Mac you can use VM Fusion, Parallels or even Boot
Camp to run Windows in a virtual environment and develop there,
only moving your code to production when you are happy with it.
There is of course the fact that they two environments would not be
identical and you may need to change a few references, but it is
still a better practice than developing on your live site. Some web
hosts give you the ability to set up a subdomain. If yours does,
you could set one up with a duplicate of your site and develop
there.
4. Let me try to pull your 'rant-let' apart into two issue. I
begin with a question. I'm not sure what the Mac part has to do
with it. The primary language I work in at my day job is
ColdFusion. The majority of the most serious developers I know in
the CF world work on Macs. I am forced into the PC world because of
a cultural bias at the business school where I work. Having said
that, the only time I have felt there was ANY difference in the
tools, resources, choices I had was in any way affected by platform
was when Adobe still had not released Flex Builder 2 for the Mac.
Now that is behind us as well. This reaction of mine may be based
on the fact that Access never comes into play in the work that I
do. I regularly work with MS SQL and MySQL. (OK, so SQL Enterprise
Manager, the MS tool of choice to talk to MS SQL is Windows only,
but I only use that at the day job. But even there you can find
cross-platform, free tools like Aqua Data Studio to talk from a Mac
to MS SQL.) If I'm missing your point on the Mac, please let me
know. Since the advent of the Intel Mac I think it is hands-down
the best choice for a web developer. You can have Mac, Windows and
Unix all on one machine. It doesn't get any better (providing you
have the RAM :-)).
As for the security question, it is somewhat analogous to the
war on viruses and spyware. As the defenses get better, so do the
attacks. Most languages have developed functions for vetting user
input variables and best practices for building these things. It is
mainly a user education issue. When I took over the book you are
working out of, the one thing Jeffrey told me it needed was more
security. I did my best to put more in under the constraints of the
publisher. They didn't want the book to be any longer than the
previous version. I did my best to modify the code used to include
"string safe" functions and to add verbiage about the importance of
security. It was clear that I could not add as much as was needed
and I said so in the book. Much more is needed for a serious
treatment of the subject and not acknowledging that would have been
a disservice to the readers. I've been working as a developer for
over a decade and I don't know all there is to know about it. It's
a constantly changing field, just like all of web development. In
fact next week I'm going through a 2-day SANS Web Application
Security workshop in hopes of learning more. So at the risk of
sounding like an industry apologist, I don't think it's a
shortcoming of the development community. It is, as they say, "a
developing situation".
HTH,
Bob
http://bobflynn.info/ -
Admittedly, I've been a bit out of touch ... however I was
wondering what the future of ColdFusion is regarding Adobe... have
they made any announcements about the future of ColdFusion? How
will it compete with formats such as PHP/mySQL in the future? Being
a long time fan of Cold fusion, I'm curious about this.>> 2. Image manipulation functionality -- provides both
high-level tag
based abstractions for common tasks like resizing, cropping,
and
format conversions
That so slack how CF still doesn't have this functionality
already - lets
hope its not too late to make a difference. Nice feature
though, sounds like
it may be quite sophisticated.
All in all though, based on what has been revealed here, it
doesn't sound
like much of an update - would still like to see some higher
level
framwework stuff, or maybe even a ColdFusion IDE (Heck, how
can they sell
this product at this price and not even offer an IDE for it?)
Lets hope the future reveals something a little more exciting
than what was
mentioned here.
"MikerRoo" <[email protected]> wrote in
message
news:[email protected]...
> Ben Forta just today sent out an email on this subject.
>
>
quote:
>
> SCORPIO -- A COMMITMENT TO COLDFUSION(R) FROM ADOBE.
>
>
> Hello Fellow ColdFusion Developers!
>
> Ben Forta, your friendly Adobe Senior Technical
Evangelist here.
> I want to give you a quick update on "Scorpio," the
code-name for
> the next major release of ColdFusion software.
>
> In case you missed the buzz at MAX 2006, we took the
"wraps" off
> Scorpio in keynote presentations and sessions by members
of the
> ColdFusion engineering team. Scorpio is still under
development but
> we can give you a preview of things to come, including:
>
> 1. The new Scorpio "server monitor" feature -- This web
> application (with a really cool front-end of Adobe(R)
Flex(TM) 2
> software), simplifies troubleshooting during
development, helps
> identify performance bottlenecks on production servers
and allows
> administrators to monitor overall server health, while
receiving
> alerts if something goes wrong. Additionally, an API
allows you to
> write your own front-ends with things like custom
monitors, bots or
> server health reports. To learn more, see Ashwin
Mathew's MAX
> presentation on the server monitor by visiting the
following link:
> <Personalized link removed>
>
> 2. Image manipulation functionality -- provides both
high-level tag
> based abstractions for common tasks like resizing,
cropping, and
> format conversions -- and low-level processing of images
with the
> addition of over 50 functions to the ColdFusion Markup
Language (CFML).
>
> 3. More advanced enterprise integration -- allows
ColdFusion
> applications to natively access .NET objects, integrate
with
> Adobe PDF files and forms, and more.
>
> We're planning to release Scorpio in mid-2007 and I am
planning
> our traditional pre-launch user group tour for early
2007. We'll
> show you lots of Scorpio features in action.
>
> I'd like to encourage you to keep up with all of the
developments
> we're making, including beta version availability, as
well as tour
> dates and locations. Just visit the link to the Adobe
Labs page
> below:
> <Personalized link removed>
>
> Thanks!
> Ben "Scorpio Man" Forta
>
> Better by Adobe(TM)
>
>
>
> Adobe, "Better by Adobe", ColdFusion, and Flex are
either registered
> trademarks or trademarks of Adobe Systems Incorporated,
in the
> United States, and/or other countries. All other
trademarks are
> the property of their respective owners.
>
> Copyright 2006 Adobe Systems Incorporated. All rights
reserved.
>
>
> -
Installed CF8 and now Flex application throwing error
HI,
I've just installed CF8 developer edition, and now I've tried
creating a new Flex application, which has nothing in it, just an
empty Main.mxml file, I did set ColdFusion Remoting as the way the
application will access data, through the project setup wizard.
Now when I run the application I get this error message:
VerifyError: Error #1053: Illegal override of subtopic in
mx.messaging.Consumer.
at frame2
at [abc-decode]
at flash.display::MovieClip/nextFrame()
at mx.managers::SystemManager/private::deferredNextFrame()
at
mx.managers::SystemManager/private::preloader_initProgressHandler()
at
flash.events::EventDispatcher/flash.events:EventDispatcher::dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at mx.preloaders::Preloader/private::timerHandler()
at flash.utils::Timer/flash.utils:Timer::_timerDispatch()
at flash.utils::Timer/flash.utils:Timer::tick()
Then if I click continue I get this error message:
ReferenceError: Error #1065: Variable
_CursorManagerStyle__embed_css_Assets_swf_mx_skins_cursor_BusyCursor_1386701310
is not defined.
at [abc-decode]
at flash.display::MovieClip/nextFrame()
at mx.managers::SystemManager/private::deferredNextFrame()
at
mx.managers::SystemManager/private::preloader_initProgressHandler()
at
flash.events::EventDispatcher/flash.events:EventDispatcher::dispatchEventFunction()
at flash.events::EventDispatcher/dispatchEvent()
at mx.preloaders::Preloader/private::timerHandler()
at flash.utils::Timer/flash.utils:Timer::_timerDispatch()
at flash.utils::Timer/flash.utils:Timer::tick()
And then if I click continue once more I get the Initializing
load screen start but never finish running so my application never
loads.
The other odd thing is I have some Flex apps which I built on
CF7, which I then imported to CF8 and they work fine running on
CF8, its only new projects which fail.
If I create a new project which doesn't use ColdFusion
remoting, the Flex application works fine. So something is a miss
with the remoting connection I think.
Any ideas?
Thanks
StephenFor me exactly the same problem. I need it to connect to my school's intranet.
I think it means either waiting for an update, or somehow find a way to use the build in VPN functionality of Leopard instead.
Good luck for us all! -
What is diff b/w Include Structure and Append Structure at Database Level
Hi Experts,
Could you please let me know what is the main difference between .Include Structure and .Append Structure at SE11?
Thanks in advance and for good answer will give good points.
SekharHi,
1. Append Structures
Append structures can only be assigned to a single table.
Append structures are created in the custome rnamespace ( ZZ or YY)
In case of new versions of the standard table during upgrade, the append structures are automatically appended to the new version of the standard table
Append structures can not be used with cluster and pool tables
Append structures are created in transaction SE11. Display the standard table fields and press the Append structure button.
When you press the button, SAP sugests a name for the new append structure. After you has accepted the name,
a screen will be shown where you can enter the new fields.
Remember to activate.
2. Customizing Includes
Some of the SAP standard tables contains special include statements called Customizing includes. In contrast to Append structures,
Note that customizing includes are created by SAP, but the customer supply the fields for the include.
Customizing includes begin with CI_ and is part of the customer namespace
One Customizing include can be inserted into more than one table.
You can find Customizing includes in SE11 under structures.
Try to take a look at table RKPF which uses the Customizing include CI_COBL (In an IDES system). Next try to add a field to CI_COBL, and activate it. If you go back to table RKPF you will se that your new field has been added.
Regards,
Ferry Lianto
Maybe you are looking for
-
Can someone help me with this problem. I want to place two items (lastName and firstName) on a page from one (parent)table and one item (attended) from another (child)table in a one-to-Many relationship. The parent table is not updateable while the c
-
How do I select, Copy and paste
Hello, I cant figure this out. I want to remove the hand from the globe. I have been trying to select the areas next to the hand so I can copy and paste but I can't select on Abobe. How do you select the area next to the hand so I can copy and pas
-
[dwm-6.0] systray looking weird
After some time I spent figuring how patches work, I finally managed to compile dwm from source. Only patches I have applied are systray and status colors. Nothing more. But I had to change sel and norm to color[0], because they are declared as color
-
Search page don't work after moving VO under another VO (by creating VL)
Hi, all! I need Your help and explaining... So, please let me discuss my problem. I had my Search page. In my search page I search for records using APasesDati VO. On day I deside to move APasesDati VO under LVAIKolekcijaDati VO (created 1 to 1 VL).
-
After updating to Version 9.0.6 , Imovie won't work at all.
How can I make my Imovie work again after upgrading to 9.0.6?