Will be possible the following situation?

will be possible the following situation?
a macbook pro to replace the hard drive in the laptop which worked for another hard drive with OS already installed? the machine will accept the default settings that are installed on the second hard drive?

If the OSX installed on the HDD is older than the MBP, it will not work.  Example, a MBP that came with Lion (10.7) will not be able to run Snow Leopard (10.6). 
You can test this by connecting the HDD to the MBP via USB.  Start the MBP with the OPTION key down.  If it recognizes the external HDD and boots the MBP, then it can be installed internally.
Ciao.

Similar Messages

  • What can I do for the following situation: I think my insert slot for the headphones does not work; when I put in any cable that should and can go in all I hear is low frequent static sounds.

    What can I do for the following situation: I think my insert slot for the headphones does not work; when I put in any cable that should and can go in all I hear is low frequent static sounds.

    You might try talking to the Apple store manager and see if you don't get more help...you might also contact Apple.com/support and see if they can give you a contact with the Apple Italy offices.
    Sounds like you have two levels of failure, the first shop that did the repair and broke a wire, and the second that has disabled something else and isn't helping.
    Apple officially refurbished equipment is usually good quality.  Surprising this has happened but you need to press on with complaints and try for resolution.

  • I would like to disable the phone jack for my mac book pro, it is a disappointment that this feature is not currently accessible . hopefully it will be with the following os x system software up date but until then is there anyone that could help me ?

    I would like to disable the phone jack for my mac book pro,
    it is a disappointment that this feature is not currently accessible .
    Hopefully it will be added with the following os x system software up date.
    until then is there anyone that could help me ? please and thank you ...

    John Galt wrote:
    Have you checked System Preferences > Sound > Output?
    Or are you interested in a phone modem adapter?
    http://www.amazon.com/Apple-MA034Z-External-V-2-Modem/dp/B000C6TLDO/
    ds store wrote:
    It's a Ethernet port, not a phone jack.
    Two good points, in which case I believe the ethernet port can be disabled, (it can on my Pro);
    System Preferences> Network> Ethernet>.........
    Highlight the Ethernet option and click the gear icon at the bottom of the panel. There should be an option to, Make service inactive.....

  • I will not open the following mail when I delete the current. How to do this?

    <i>Locking duplicate thread.<br>Please continue here: [[/questions/992961]]</i>
    Hello,
    First of all, sorry for my bad english !!
    When I am delete the mail I was reading, the following (in the list) is displayed.
    I will avoid this, I will go back to the list of mail received.
    I ahev not finded how to do that in the options

    I understand your issue.
    I suggest you download this Addon: https://addons.mozilla.org/en-us/thunderbird/addon/deselect-on-delete/
    * Download to desktop or Downloads file.
    * In Thunderbird, 'Tools' > 'Add-ons' to open 'Add-ons Manager' in a new tab.
    * click on daisy wheel icon and select 'Install Addon from file'
    * locate the downloaded .xpi file and click on 'Open'

  • Is there such a modle of iPhone 4S, that will work for the following?

    I have read a couple discussions here, yet 99% of them are talking about using Verizon / Sprint's iPhone 4S on AT&T, or another way.  I'm not finding an answer of my simple question, that is, I want to get an iPhone 4S, which works for CDMA (if not both, at least Verizon), AT&T, T-Mobile, and GSM outside the US.
    What would be the right way to get one?  I ran into problem because I know:
    - An iP4S obtinaed from CDMA (Verizon / Sprint) could be SIM unlocked but only works for GSM carrier outside the US. WIll not work for AT&T or T-Mobile.
    - An iP4S purchased contract-free will work for AT&T, T-Mobile, and GSM outside the US, but not CDMA.
    - An iP4S obtinaed from AT&T, works in AT&T only, the SIM and CDMA cannot be unlocked.

    Thanks for you all above to clarify my question.  One last question here. 
    Taking GSM out of the discussion, can a Verizon iPhone 4S be used in Sprint?  Or if I switch from Verizon to Sprint, I simply have to sell my Verizon iPhone 4S and buy another 4S under Sprint, even they are mechanically identical and the only difference is how software profile is applied?

  • Which RV220W VPN-setup do I choose in the following situation?

    My RV220W has a fixed IP-address on its WAN and there is an ISP-provided FQDN with reverse lookup available. Is it possible to setup an IPsec VPN on this box that a Mac laptop can connect to the VPN from any location world wide that does not actively block VN traffic in some way?
    I know a PPTP connection to the server on my LAN works, but I'd rather have an IPsec connection to the RV220W and turn the PPTP server on the host inside my LAN off.
    If this is possible, what do I enter where in the wizard?
    I have been unable to get this from the manual or by trying to find a recipe somewhere on the net,

    It explains how to set up the RV220w for IPSec, and connecting using free IPSec clients on both Windows and MacOS.
    https://drive.google.com/file/d/0B0EERf9TN4v1Ym9uaWRlMXhfVGM/edit?usp=sharing

  • Firefox 4.01 with multiple tabs/windows open will close with the following dialoog boxes appearing, one for each window, evidently, "invalid preferences extensions.bprivacy.timer check that is listed in defaults/prefs.js"

    The cause of the need to revert to the last known good operating condition was trying to download a file from a Yahoo discussion group. The download froze the machine. When Firefox was restarted, it froze on loading, at first step of loading multiple windows and tabs. Many reboots to the same frozen state led to revert to the last restore point. That produced equivalent results on startup of Firefox, the option of F8 and revert to last known good operating condition was done. Everything seemingly operate OK, with the exception of the pop-up dialog boxes on shutdown of Firefox .
    Began Thursday 5/26/11
    I know locations and dates of all files "prefs.js" but don't know what to do with them, if anything.

    I removed add-on BetterPrivacy. No problems since then anymore.
    Regards,
    HABSBURGER

  • Would ARD work for the following situation...?

    Hello, trying to logically map out how to do something and wonder if some of ya could help me...
    Here is the deal.  I'm a narrator and my current studio set-up is one where I have an outer
    control room where my computer with sound software and monitor are located.  When I perform,
    I "roll tape" (i.e., start my audio software app)  and then go into my isolated sound booth to
    read my script printout. 
    I would like to have a monitor inside the booth whereby I can monitor, visually, the
    displayed audio on the outer-room monitor while I record, as well as read scripts off
    the screen rather than having to print them.  I'd also need a keyboard/mouse in the
    soundbooth - which presumably would be a wireless bluetooth arrangement - 
    Am just trying to figure out the most logical way to accomplish this -  Would it make
    sense to use Remote Desktop to serve as the secondary monitor - and would it work
    for what I'm describing - or otherwise, any ideas on a simple straightforward way to
    accomplish what I'm looking to do..?  this is just a project i've put off for years and
    would like to finally get it together.  Some had suggested video mirroring - and the
    issue of bluetooth distance from the outer-room CPU may be a problem - I don't know.
    Others thought i should hardwire usb and video cables into the booth from a separate,
    dedicated computer that shared my Airport/Ethernet network...
    Of course, if all this belongs in a different discussion, feel free to 'tell me where to go; )
    Hope my explanation is clear and Thanks much for any ideas!
    Mike

    For just doing remote control, ARD would be overkill. Mac OS X 10.5 and 10.6 both have screen sharing built in, so if you can put a computer in the recording room, that would be all you'd need. Or you could just extend a monitor, keyboard and mouse into the room (Bluetooth for the keyboard and mouse if close enough, or USB). There are extenders if the distance is too great for normal runs, though the extenders, particularly for video, are a bit spendy.
    If space and noise are the primary concerns, a remote control solution using an iPad, such as Remote Conductor might be an option.
    Regards.

  • Ojc will compile the following class. A bug?

    I thought that in Java classes cannot be declared protected. ojc will however compile the following class:
    protected class aclass
    The Sun java compiler prints the following error:
    aclass.java:1: modifier protected not allowed here
    protected class aclass
    Is this a known bug in the Oracle Java compiler?

    Yes, it seems we have a little bug in OJC, the protected access modifier should only be allowed for member classes. I filed a bug report and I'll fix it.
    Thanks!
    Keimpe Bronkhorst
    JDev Team

  • Automaticly drag lonely scene headings to the following page.

    Hi,
    I really really need Sdobe Script to be able to automaticly drag lonely scene headings to the following page.
    This is VERY significant error in the Adobe Script... at least I cant find any option to enable it...
    Manually addind (ctrl+enter) empty rows is not a real solution... imagine having a 120 page script and you have to make
    a one word change in page 3 and this adds one row... then you would have to scroll through every single page break again
    to check for LONELY SCENE HEADINGS. They simply cannot exist in the end of the page alone as they now do!
    It is an absolute must to have an option to enable AUTOMATIC DRAG OF LONELY SCENE HEADING to next page.
    PLEASE!
    Otherwise thank you for really nice application. Sometimes both the desktop and browser versions "jam" and start to
    function reaaaaaaly slow. I'll try to find out when this happens and post more info later.

    Thanks,
    I checked the option "start new page" for Scene headings but its not quite what I meant. Now it starts a new page for every single scene heading.
    The thing is I only want it to move the scene heading to the next page if/when it is left "alone" in the bottom of a page.
    For example in the following situation I would want to have the Scene heading to jump on the next page. Because the action description or character name will not fit on the same (cuurent) page with it.
    INT. ADOBE FORUM - DAY
    ------------------PAGE BREAK--------------------
    An important question is being asked and the crowd waits in agony.
    It seems that the lonely scene headings cannot jump to the next page
    to join the action description.

  • Ipod will only getto the unhappy pic and then to a battery pic.

    My brand new ipod video has recently taken a turn for the worst, when i try to turn it on it only getsto the unhappy logo and then to a battery logo. i've alredy tried to restart, it wont go in to disk mode, and nothing on my comp will recognize it. what should i do, of course instead of throwing it against a wall?

    Hello,
    If a sad iPod icon or an exclamation point and folder icon appears on your iPod’s screen, or with sounds of clicking or HD whirring, it is usually the sign of a hard drive problem and you have the power to do something about it now. Your silver bullet of resolving your iPod issue – is to restore your iPod to factory settings.
    http://docs.info.apple.com/article.html?artnum=60983
    If you're having trouble, try these steps at different levels one at a time until the issue is resolved. These steps will often whip your iPod back into shape.
    Make sure you do all the following “TRYs”
    A. Try to wait 30 minutes while iPod is charging.
    B. Try another FireWire or USB through Dock Connector cable.
    C. Try another FireWire or USB port on your computer .
    D. Try to disconnect all devices from your computer's FireWire and USB ports.
    E. Try to download and install the latest version of iPod software and iTunes
    http://www.apple.com/ipod/download/
    http://www.apple.com/itunes/download/
    F. Try these five steps (known as the five Rs) and it would conquer most iPod issues.
    http://www.apple.com/support/ipod/five_rs/
    G. Try to put the iPod into Disk Mode if it fails to appear on the desktop
    http://docs.info.apple.com/article.html?artnum=93651
    If none of these steps address the issue, you may need to go to Intermediate level listed below in logical order. Check from the top of the lists to see if that is what keeping iPod from appearing on your computer in order for doing the Restore.
    Intermediate Level
    A. Try to connect your iPod with another computer with the iPod updater pre-installed.
    B. Still can’t see your iPod, put it in Disk Mode and connect with a computer, instead of doing a Restore on iPod Updater. Go and format the iPod instead.
    For Mac computer
    1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
    2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
    3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
    4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
    5. Eject your iPod and do a Reset
    6. Open the iPod Updater and click “Restore”
    For Window computer
    Go to folder “My Computer”
    Hope you can see your iPod there and right click on the iPod
    Choose “Format”. Ensure the settings are at “Default” and that “Quick Format” is not checked
    Now select “Format”
    Eject your iPod and do a Reset
    Open the iPod Updater and click “Restore”
    In case you do not manage to do a “Format” on a window computer, try to use some 3rd party disk utility software, e.g.“HP USB Disk Storage Format Tool”.
    http://discussions.apple.com/thread.jspa?threadID=501330&tstart=0
    C. Windows users having trouble with their iPods should locate a Mac user. In many cases when an iPod won't show up on a PC that it will show up on the Mac. Then it can be restored. When the PC user returns to his computer the iPod will be recognized by the PC, reformatted for the PC, and usable again. By the way, it works in reverse too. A Mac user often can get his iPod back by connecting it to a PC and restoring it.
    Tips
    a. It does not matter whether the format is completed or not, the key is to erase (or partly) the corrupted firmware files on the Hard Drive of the iPod. After that, when the iPod re-connected with a computer, it will be recognized as an fresh external hard drive, it will show up on the iPod updater.
    b. It is not a difficult issue for a Mac user to find a window base computer, for a PC user, if they can’t find any Mac user, they can go to a nearest Apple Shop for a favor.
    c. You may need to switch around the PC and Mac, try to do several attempts between “Format” and “Restore”
    http://discussions.apple.com/thread.jspa?messageID=2364921&#2364921
    Advance Level
    A. Diagnostic mode solution
    If you have tried trouble shooting your iPod to no avail after all the steps above, chances are your iPod has a hardware problem. The iPod's built-in Diagnostic Mode is a quick and easy way to determine if you have a "bad" iPod.
    You need to restart your iPod before putting it into Diagnostic Mode. Check that your hold switch is off by sliding the switch away from the headphone jack. Toggle it on and off to be safe.
    Press and hold the following combination of buttons simultaneously for approximately 10 seconds to reset the iPod.
    iPod 1G to 3G: "Menu" and "Play/Pause"
    iPod 4G+ (includes Photo, Nano, Video, and Mini): "Menu" and "Select"
    The Apple logo will appear and you should feel the hard drive spinning up. Press and hold the following sequence of buttons:
    iPod 1G to 3G: "REW", "FFW" and "Select"
    iPod 4G+ (includes Photo, Nano, Video, and Mini): "Back" and "Select"
    You will hear an audible chirp sound (3G models and higher) and the Apple logo should appear backwards. You are now in Diagnostic Mode. Navigate the list of tests using "REW" and "FFW". The scroll wheel will not function while in diagnostic mode. For further details on Diagnostic mode can be found at http://www.methodshop.com/mp3/ipodsupport/diagnosticmode/
    Try to do the 5in1, HDD R/W and HDD scan tests. Some successful cases have been reported after the running the few tests under the Diagnostic mode. In case it does not work in your case, and the scan tests reports show some errors then it proves your iPod has a hardware problem and it needs a repairing service.
    B. Format your iPod with a start disk
    I have not tried this solution myself, I heard that there were few successful cases that the users managed to get their iPod (you must put your iPod in disk mode before connecting with a computer) mounted by the computer, which was booted by a system startup disk. For Mac, you can use the Disk Utility (on the Tiger OS system disk), for PC user, you can use the window OS system disk. Try to find a way to reformat your iPod, again it does not matter which format (FAT32, NTFS or HFS+) you choose, the key is to erase the corrupted system files on the iPod. Then eject your iPod and do a Reset to switch out from Disk Mode. Reboot your computer at the normal way, connect your iPod back with it, open the iPod updater, and hopefully your iPod will appear there for the Restore.
    If none of these steps address the issue, your iPod may need to be repaired.
    Consider setting up a mail-in repair for your iPod http://depot.info.apple.com/ipod/
    Or visit your local Apple Retail Store http://www.apple.com/retail/
    In case your iPod is no longer covered by the warranty and you want to find a second repairing company, you can try iPodResQ at your own risk
    http://www.ipodresq.com/index.php
    Just in case that you are at the following situation
    Your iPod warranty is expired
    You don’t want to pay any service charges
    You are prepared to buy a new one
    You can’t accept the re-sell value of your broken iPod
    Rather than leave your iPod as paper-weight or throw it away.
    You can try the following, but again, only do it as your last resort and at your own risk.
    Warning !!!! – It may or may not manage to solve your problem, and with a risk that you may further damage your iPod, which end up as an expensive paper weight or you need to pay more higher repairing cost. Therefore, please re-consider again whether you want to try the next level
    Last Resort Level
    1. . Disconnecting the Hard Drive and battery inside the iPod – Warning !! Your iPod warranty will be waived once you open the iPod.
    In Hong Kong there are some electronic shops offering an iPod service for Sad iPod, the first thing they do is to open up the iPod’s case and disconnecting the battery and the Hard Drive from the main board of the iPod. Wait for 5-10 minutes and reconnecting them back. The reason behind which I can think of is to do a fully reset of a processor of the iPod. In case you want do it itself and you believe that you are good on fixing the electronics devices and have experience to deal with small bits of electronic parts, then you can read the following of how to open the iPod case for battery and HDD replacement (with Quicktimes)
    http://eshop.macsales.com/tech_center/index.cfm?page=Video/directory.html
    2.Press the reset button on the Hard Drive inside the iPod – Suggestion from Kill8joy
    http://discussions.apple.com/thread.jspa?messageID=2438774#2438774
    Have I tried these myself? No, I am afraid to do it myself as I am squeamish about tinkering inside electronic devices, I have few experiences that either I broke the parts (which are normally tiny or fragile) or failed to put the parts back to the main case. Therefore, I agree with suggestion to have it fixed by a Pro.
    2. Do a search on Google and some topics on this discussion forum about “Sad iPod”
    Exclamation point and folder and nothing else
    http://discussions.apple.com/thread.jspa?messageID=2831962#2831962
    What should I do with my iPod? Send it or keep it?
    http://discussions.apple.com/thread.jspa?threadID=469080&tstart=0
    Strange error on iPod (probably death)
    http://discussions.apple.com/thread.jspa?threadID=435160&start=0&tstart=0
    Sad Face on iPod for no apparent reason
    http://discussions.apple.com/thread.jspa?threadID=336342&start=0&tstart=0
    Meeting the Sad iPod icon
    http://askpang.typepad.com/relevanthistory/2004/11/meeting_thesad.html#comment-10519524
    Sad faced iPod, but my computer won’t recognize it?
    http://discussions.apple.com/thread.jspa?messageID=2236095#2236095
    iPod Photo: unhappy icon + warranty question
    http://discussions.apple.com/thread.jspa?messageID=2233746#2233746
    4th Gen iPod Users - are we all having the same problem?
    http://discussions.apple.com/message.jspa?messageID=2235623#2235623
    Low Battery, and clicking sounds
    http://discussions.apple.com/thread.jspa?messageID=2237714#2237714
    Sad faced iPod, but my computer won’t recognize it
    http://discussions.apple.com/thread.jspa?messageID=2242018#2242018
    Sad iPod solution
    http://discussions.apple.com/thread.jspa?threadID=412033&tstart=0
    Re: try to restore ipod and it says "can't mount ipod"
    http://discussions.apple.com/thread.jspa?threadID=443659&tstart=30
    iPod making clicking noise and is frozen
    http://discussions.apple.com/thread.jspa?messageID=2420150#2420150
    I am not suggesting that you should follow as well, but just read them as your reference. You are the person to make the call.

  • When opening itunes i got the following message:  "Apple Application Support was not found.  Apple Application Support is required to run itunes. please uninstall itunes, then install itunes again." if i do this will i lose my music library?

    when opening itunes i got the following message:  "Apple Application Support was not found.  Apple Application Support is required to run itunes. please uninstall itunes, then install itunes again   Error 2 (Windows Error 2)." if i do this will i lose my music library?

    Hi texasslagle,
    It sounds like you are having issues installing iTunes on your Windows 7 PC, a frustrating situation I am sure.
    There is an article that you may want to use to try to complete your install here -
    iTunes 11.1.4 for Windows: Unable to install or open
    http://support.apple.com/kb/ts5376
    Thanks for using Apple Support Communities.
    Best,
    Brett L

  • Is it possible to recover a Database in the following condition??

    Dear folks:
    this question has confused me quite a while, and nobody I asked can answer it. Please kindly provide any hint to the following question:
    Suppose I did a hot backup last night.
    (use ALTER TABLESPACE BEGIN BACKUP;copy Datafiles;ALTER TABLESPACE END BACKUP;repeat and finish all those Tablespaces;ALTER DATABASE BACKUP CONTROLFILE TO 'abc';)
    Today, my hard drive crash and everything is gone!!
    Now, the only thing I have are the Datafiles and Control file backed up last night (use the method above).
    Is it possible, if Yes, how,to recover the DB in this condition??
    Thank you very very much for your reply...
    Wayne

    Wayne here you have the procedure to recreate the controlfile.
    CREATE CONTROLFILE
    Caution:
    Oracle recommends that you perform a full backup of all files in the database before using this statement. For more information, see Oracle9i User-Managed Backup and Recovery Guide.
    Purpose
    Use the CREATE CONTROLFILE statement to re-create a control file in one of the following cases:
    All copies of your existing control files have been lost through media failure.
    You want to change the name of the database.
    You want to change the maximum number of redo log file groups, redo log file members, archived redo log files, datafiles, or instances that can concurrently have the database mounted and open.
    Note:
    If it is necessary to use the CREATE CONTROLFILE statement, do not include in the DATAFILE clause any datafiles in temporary or read-only tablespaces. You can add these types of files to the database later.
    An alternative to the CREATE CONTROLFILE statement is ALTER DATABASE BACKUP CONTROLFILE TO TRACE, which generates a SQL script in the trace file to re-create the controlfile. If your database contains any read-only or temporary tablespaces, that SQL script will also contain all the necessary SQL statements to add those files back into the database
    Creating a Controlfile: Example
    This statement re-creates a control file. In this statement, database demo was created with the WE8DEC character set. The example uses the word path where you would normally insert the path on your system to the appropriate Oracle directories.
    STARTUP NOMOUNT
    CREATE CONTROLFILE REUSE DATABASE "demo" NORESETLOGS NOARCHIVELOG
    MAXLOGFILES 32
    MAXLOGMEMBERS 2
    MAXDATAFILES 32
    MAXINSTANCES 1
    MAXLOGHISTORY 449
    LOGFILE
    GROUP 1 '/path/oracle/dbs/t_log1.f' SIZE 500K,
    GROUP 2 '/path/oracle/dbs/t_log2.f' SIZE 500K
    # STANDBY LOGFILE
    DATAFILE
    '/path/oracle/dbs/t_db1.f',
    '/path/oracle/dbs/dbu19i.dbf',
    '/path/oracle/dbs/tbs_11.f',
    '/path/oracle/dbs/smundo.dbf',
    '/path/oracle/dbs/demo.dbf'
    CHARACTER SET WE8DEC
    http://download-west.oracle.com/docs/cd/B10501_01/server.920/a96540/statements_54a.htm#SQLRF01203
    Joel Pérez

  • I keep getting script errors when accessing Amazon Seller merchant pages. I get the following A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script will complete. Script

    I keep getting script errors when accessing Amazon Seller merchant pages. I get the following A script on this page may be busy, or it may have stopped responding. You can stop the script now, or you can continue to see if the script will complete. Script: chrome://spautofill/content/spOverlay.js:150, I also get js210 as well. I have cleared all cookies and history and unistalled Firefaox and reinstalled. Been thru my AVS and set the site as trusted in every possible place. Still get the problem. Do not get it with IE on same PC.
    == URL of affected sites ==
    https://sellercentral.amazon.co.uk

    Same problem but with a different vendor site:
    https://www.webvitamins.com/myfavorites.aspx
    Not only does the page hang, but the other tabs also hang.
    I contacted the vendor and their reply was "we were told that this looks like a script that is used by "Sticky Password", third-party software that must have been installed on your browser. However, our website did not install it and does not have anything to do with it." As far as I can tell, "Sticky Password" is not installed on my Firefox.
    Same problem as above occurs, but with IE 8.0.6001.18702. Therefore, it is not unique to Firefox.
    CAUSE DETERMINED: Have determined that this problem only occurs when Kaspersky Password Manager is installed. In Firefox, if the "Password Manager Autofill Engine" add-on is disabled, the problem goes away.

  • TS3276 How do I reconfigure Mail to the new settings required by Verizon? If I don't comply by Sept. 2013, my mail service will be interrupted.  The following is the message that I received from Verizon:

    How do I reconfigure Mail to the new settings required by Verizon. If I don't comply by Sept. 2013, my mail service will be interrupted.
    The following is the message that I received from Verizon:
    Please update your POP email application’s inbound and outbound server settings as soon as possible to match the new settings below:
    Server                    Current Setting                  New Setting                  SSL Enabled               Port
    POP3 Server       incoming.verizon.net           pop.verizon.net                       YES                   995
    SMTP Server        outgoing.verizon.net         smtp.verizon.net                      YES                   465
    TIPS: Depending on your email application, you may need to turn off Secure Password Authentication and, if applicable, make sure your Authentication method is set to “Password” or “Normal password.” In addition, you may need to restart your device for these new settings to take effect and for your email to continue working properly.

    On 10.7 (most any other versions should be similar) Mail > Preferences > Accounts > select account > Account Information, and confirm that the Account Type at the top is POP. 
    If it's currently working and is shown as an IMAP account, then please stop now, and reply back here with that detail.
    If the account is shown as a POP account, then update the incoming (receive-path) mail server to match Verizon's message if your current settings show a different mail server, then select the Advanced tab to set the port and to enable SSL, and also ensure that the Authentication setting has "Password" selected... 
    Now for the outbound (SMTP) path...  Back over to the Mail > Preferences > Accounts > select account > Account Information tab, and switch the Outgoing Mail Server (SMTP) selector to "Edit SMTP Server List" item to get to the "outbound" mail settings and select the Verizon SMTP server account from the list shown at the top and select the Account Information tab and ensure that the server name matches what Verizon has now specified, and then select the Advanced tab, select Use Default Ports and check the Use Secure Sockets Layer box.  

Maybe you are looking for