Will Be Re-Installing VISTA Ultimate

My relatively new Dell VISTA computer is having problems and I will be re-installing the operating system which will remove all my programs and files. I'm backing-up the "My Music" folder, however I would like to find the folder holding the music soley residing in the iTunes music directory. Those selections also reside on my iTouch. Can I import only those iTouch tracks and related album artwork back to the new iTunes directory after re-installing VISTA and iTunes?
I can't seem to find the iTunes music directory on my hard-drive. If that is not possible, because iTunes only utilizes the allowaqble tracks in "My Music", is there a way to reverse sync music tracks/artwork from my iTouch to the iTunes msic directory?

Depending on how iTunes is setup for you, the iTunes music is stored in the itunes folder in the my music folder. Backup the ENTIRE itunes folder the deathorize iTunes before reinstalling windows. Deauthorize before hand to keep from using up one of the authorizations.

Similar Messages

  • GX720 barbone can't install Vista Ultimate 64

    hi everybody! i have gx720 barebone and i tried to install vista ultimate 64 bit on it! everything seems nothing happened ! but when i tried to activate it and restarting! its stops at ms boot screen !the green slide still running ! but it doesnt boot ! and i have to reinstall OS again !  i need help ! cpu  t9600    4gb   7k 320gb   and i usually this activation way and OS alot. so do i need update bios or what ? i need help !

    Quote from: DarthBane on 05-July-09, 07:01:56
    i have vista x64 installed.  You are going to have to be more descriptive and clear.
    Mike moved your post and gave it a topic; he didn't offer any advise on your issue.
    4 GBs of RAM means you have added more memory.  Are you sure this memory is compatible?  Have you tested the stability of the upgrades with Memtest86+?  Does it work without the extra memory?

  • No Wireless or Ethernet Driver After Installing Vista Ultimate on New Mac

    After installing Vista Ultimate 32 bit on my 17" 2.6 GHz MacBook Pro (486 gb hard drive, 101 gb bootcamp partition), (4 gb ram) The Vista Installation has no Driver Listed (or connectivity) for either the Apple Wireless or Ethernet drivers.
    Any thoughts?

    Did you install the drivers from the computer's software install DVD?
    Please post further questions regarding Boot Camp in the Boot Camp forums:
    http://discussions.apple.com/category.jspa?categoryID=237

  • Cannot install Vista Ultimate 64bits on Mac Pro 2008

    Hello,
    I'm trying to install Vista Ultimate 64bits on my new Mac Pro (2008, 2x Quad Core, 3x 500GBHDD, 16 GB Ram), but Vista is unable to find a correct partition type.
    The first thing I did was to install a 4th HD, and I constantly received an error 0x80004005 which seems to be too generic.
    Then I tried to install it on the 3rd HD (Bay 2 is where my OS X startup disk is located btw) but here no way neither....Windows cannot find a valid partition.....
    I tried to partition it manually in MBR...same problem....
    Then with BootCamp assistant...same problem...
    I also tried to use Vista Business 64 SP1, same problem...
    Do you have any idea ?
    Thanks,
    Patrick

    Hello,
    Thanks for your answer, but unfortunately I'm still stuck...
    To resume the situation :
    I put a brand new 250GB SATA in the bay 4.
    I start Bootcamp Assistant and tell him that I want to use this new disk for Windows and then start Vista x64 install.
    Vista sees 2 partitions on this new disk :
    Disk 3 Partition 1 : 200 MB (Primary)
    Disk 3 Partition 2 : 230 GB (Primary)
    If I try to use the P2 for the install, I have to format it first. Once formatted, Vista says : This computer's hardware may not support booting to this disk. Ensure that the disk controller is enabled in the computer's BIOS menu.
    If I try to use the 200 MB (just for fun..), then I also have to format it, but here I receive the error message 0x8000xxxx
    So clearly I'm lost...
    Could it be related to the 16 GB RAM ? Too much for Vista ?? I don't believe as this is Vista x64...
    Thanks for your help, ideas..
    Patrick

  • Satellite A200-13O: Help in installing Vista Ultimate from Basic

    I need help in installing Windows Vista Ultimate in my A200-13O.
    My current operating system is Windows Vista Basic and I want to upgrade it to Windows Vista Ultimate.
    Based on the driver download section I need the following drivers to be installed.
    1 Windows Vista RTM
    2 Intel ICH7M Chipset Utility native
    3 Intel 945GM Display Driver
    or
    3 nVIDIA G72MV-A3/NB7P-GS Display Driver
    4 Realtek ALC861D Audio Driver
    5 Realtek 10/100 8101E/ Gigabit 8111B LAN Driver
    6 Synaptics Touch Pad Driver (with LuxPad)
    7 ALPS Touch Pad Driver
    8 TI Multiple Digital Media Card Reader
    9 TOSHIBA Software Modem
    10 Intel Golan Wireless LAN Driver
    11 Intel Kedron Wireless LAN Driver
    12 Atheros Wireless LAN Driver
    13 Chicony Camera Software
    14 Bluetooth Stack for Windows by Toshiba
    15 Bluetooth Monitor
    16 TOSHIBA Value Added Package
    17 TOSHIBA Flash Cards Support Utility
    18 TOSHIBA Hardware Setup Utility
    19 TOSHIBA Supervisor Password
    20 TOSHIBA SD Memory Utilities
    21 TOSHIBA ConfigFree
    22 TOSHIBA Assist
    23 TOSHIBA Speech System
    24 TOSHIBA Extended Tiles for Windows Mobility Center V1.01
    25 TOSHIBA Fingerprint Utility V5.6.0.3221
    I have already downloaded most of them but I can't find some like [2] Intel ICH7M Chipset Utility, [11] Intel Kedron Wireless LAN Driver, [23] TOSHIBA Speech System. Also some of the drivers are not installing properly.
    Can you please help me out.

    The chipset driver you can get on the Intel webiste
    www.intel.com
    But I think the driver could also be in the display driver because its the same chip.
    The WLAN driver I have found on the Toshiba website so download and install it.
    The speech system could be integrated in the sound driver.
    But download and install all drivers and the system will work.

  • Who has installed Vista Ultimate SB at Satellite M40

    Is there anyone who have Vista Ultimate installed at Satellite M40? I've big problems to install Vista. After I disabled the PCMCIA it's OK. I'm looking for a new BIOS-update and Vista-drivers.

    Hi
    Im a M40 owner but I did not install the Vista on this unit. I use the XP.
    I did not install the Vista on this unit because according to the Toshiba document which I found in this forum the Toshiba drivers are not available and I dont think that this drivers will be available in the next time or anytime for this notebook series.
    Does the notebook have a Vista capable sticker? I dont think so :(

  • Need to install vista ultimate 64 bit

    Hi, I recently bought an Apple Macbook Pro 15 with 2.66 GHz Processor, 4GB DDR3 Ram, 320 GB 7200 RPM HDD & Nvidia 9600 GT 512MB DDR3 Graphics Chipset. Actually I want to create a new partition to install Windows Vista Ultimate 64 bit Os so can somebody please guide me? As you already know that the trackpad of this notebook doesn't have any click buttons so can you please tell about how to right click a folder or file on windows vista? Thanks!

    This forum is for troubleshooting Apple Software Update for Windows, a software package for Windows designed to update Apple products that run on Windows, and not related to the installation on Windows. Please post your question in the Boot Camp forums:
    http://discussions.apple.com/category.jspa?categoryID=237

  • SQL Developer 1.1.2.2579 will not start in Vista Ultimate 64 bit

    I have tried both versions of 1.1.2.2579 (with JRE/JDK and without). Both versions give me "The application failed to initialize properly (0xc0000018). Click OK to terminate the application." Build 1557 seems to work fine on the same machine (with UAC off. I have not tried it yet with UAC on).
    Here are some machine details: MS Windows Vista Ultimate 64 bit, default JVM Sun 1.5.0_11 [Java HotSpot(TM) 64-Bit Server VM (build 1.5.0_11-b03, mixed mode)]. Since other folks had some problems with UAC I disabled that to see if it would make any difference. I get the same result with or without UAC when I try to launch the application normally. With UAC on and using "run as administrator" I get nothing at all. That is I get no error but the application never actually launches either. It doesn't appear to do anything at all.
    The version of 1557 that seems to work fine is the one with the JRE.

    And???
    We can't help you if you don't tell us what you tried
    and what happened when you tried it.This is message when try run on vista ultimate x64 "The application failed to initialize properly (0xc0000018). Click OK to terminate the application."
    you can help??? what is happen???
    finally sql developer run or not run on vista x64???
    p.s.: excuse-me... i don´t write in english very well.... waiting replies!!!
    thanks!
    Message was edited by:
    user571753

  • Problems installing vista ultimate

    I have vista home on my x61, but want ultimate, when I put in the DVD (in USB-dvd reader), the computer only does a normal start-up, I went to bios and made "usb-dvd" first priority on start-up... What am I dont wrong?
    Thinkpad X61 7675-A48. 2.5 Ghz, 4 GB ram, 160 GB hdd.

    Press F12 while booting and then choose your DVD as a temporary boot device from the menu offerred.
    Hope this helps. 
    Cheers,
    George
    In daily use: R60F, R500F, T61, T410
    Collecting dust: T60
    Enjoying retirement: A31p, T42p,
    Non-ThinkPads: Panasonic CF-31 & CF-52, HP 8760W
    Starting Thursday, 08/14/2014 I'll be away from the forums until further notice. Please do NOT send private messages since I won't be able to read them. Thank you.

  • Install Vista Ultimate fresh

    Anyone could advise what drivers i should ready b4 i get started for a fresh installation of Windows Vista 32bit.  Hmmm, don't ask me why I dun have recovery CD/DVD.  The answer is I just dun have it.

    Oh!  My system is 7673-CV5 x61.  T8100, 3G RAM, 320GB hd.

  • X58 Pro will not install Vista/7

    Specs:
    Mobo: MSI X58 Pro MS-7522
    CPU: Core i7 920
    RAM: Corsair TR3X3G1333C9 Triple-Channel DDR3 1.5v 9-9-9-24
    PSU: Thermaltake PurePower 500W +12V-14A and +12V-15A
    OS Installed: Vista Ultimate 32-bit
    Primary HDD: Seagate 750GB 7200 RPM
    Secondary HDD: Seagate 200GB 7200RPM
    History: Original BIOS always gave me a delayed POST issue. Fan spins at full speed for 15 seconds before POST'ing. If running for 15+ hours, a restart will cause the fan to just spin at full speed and NEVER POST unless I turn the computer off, reset the mobo, wait about 20 minutes and then boot it and it will do the 15 second thing. I just got used to this and dealt with it.
    Finally I updated the BIOS to 8.6 when it was the current version and that delayed POST problem was history! Then other things happened. "Host process sevice" would stop working and force a 1minute scheduled shutdown that I would have to terminate by typing 'shutdown /a' in the shell.
    Recent events made me decide it was time to just wipe it and move on to Windows 7. I already have it on laptop (i'm on right now), so I'm using the same disc to put it on this desktop. I have tried a Retail Vista disc and this Retail Win7 disc and both of them yield the same result: I boot to CD, it loads the prep files and just when you think the installation program is going to begin, the monitor goes to standby and the computer just runs doing nothing. It simply keeps running without anything happening.
    I went back into windows and wiped my alternate HDD and decided to try just installing the new OS to this alternate disc. I wiped it in Disk Management, turned off the computer, disconnected the primary HDD so that only the one I wish to interact with is available. Same result, install hangs just after prep
    Assuming the only thing that's now possibly affectin gthis is either the BIOS or the RAM. I flashed the BIOS with the newest version, 8.8. Same result, I flashed again with 8.7; same result. I decided maybe I need to go back to what I had when I installed it the first time, so I flashed it with 8.1 which is just a tiny bit more recent. Guess what, the delayed POST with the full-speed fan issue came right back, but the install gave me same result. I'm usually pretty good about things like this, but I really can't figure out where to go from here> Someone please give me a little insight, I really appreciate it.

    My Video card is an ATI Radeon X1900XT PCI-E card that I've never had issues with in the past.
    I am running the 64-bit Win7 disc right now....fingers crossed....(only 1stick of RAM currently installed)......fail :(
    EDIT:: OH MY GOODNES!!!!!!!!
    Okay, so thank you for mentioning the video card because I would have continuted pulling my hair out. The fix? drumroll please.......The prep showed in one monitor but when the program actually got to the "install now" page it was sending it to the 2nd monitor which I only turn on when I'm doing web work.
    Removed 2nd monitor from equation, rebooted and the install is running. Wow I feel so dumb right now.

  • Vista Ultimate: install Bootcamp failed, cannot switch back to Leopard

    Hello
    I just installed Vista Ultimate on a 100 Gb partition. After having finished I tried to install Bootcamp, needed to switch back to Leopard.
    Though the installation of Bootcamp finishes OK I can't find it back in the Control Panel. So I'm not able to switch back to Leopard any longer.
    And since I cannot restart Leopard, I cannot uninstall Vista Ultimate, so I'm running in a circle ..
    Any suggestion/help how to get back in the original settings would be very welcome. thx in advance folks !

    The Hatter thanks for your quick response !
    Installing Boot Camo in 64 bits Vista cause problems with Services "KeyAgent" and "MacHAL". However install ends with msg "install ended successfully". I believe this might not be true ..
    Want to uninstall and afterward reinstall 32 bits version.
    However, prefer installing Vista 32 bits having started with Leopard, just to be sure. But I can't come back to Leopard without BootCamo.
    Will try to perform a "direct" 32 bit install in the partition where 64 bits resides now.
    If this succeeds I must be able to install Boot Camp succesfully ...
    Don't you think so ?

  • Itunes won't open on my Vista Ultimate OS-error message is "ITunes won't open w/o Apple applications support, uninstalled and installed numerous time, QuickTime too?

    Itunes will not boot on Vista Ultimate-  error message is Itunes cannot opperate w/o Apple Application Support
    ITunes has been uninstalled and reinstalled numerous times, program files and Window files have been checked and deleted.
    All I want to do is update my I4 IPhone

    Quicktime doesn't open either and sends same error message

  • Oracle Database 11g Release 1 (11.1.0.6.0)  and Windows Vista Ultimate

    Hi,
    Hoping someone who has already tried/installed can let me know whether the installation of Oracle Database 11g Release 1 (11.1.0.6.0) will work on Windows Vista Ultimate (32bit) or knows whether it does or doesn't?
    Thanks.
    Tony.

    For this kind of information , check Oracle certification page
    Certify - Oracle's Certification Matrices

  • TEMPRO is not working for Vista Ultimate x64

    Hi
    I have a Qosmio F50-10K and I installed Vista ultimate x64 and the Tempro appliaction is not working. After I install it, I left the Start Tempro button checked and when I press finish it gives me this error:
    "internal error 2753
    Toshiba.ui.controlpanelapplication.exe"
    Same thing happens when I uncheck the box with start tempro.
    For both situations nothing is left in the system, no files, no regstry, nothing.
    Please HELP
    Thank you

    Hi!
    I searched on the Toshiba download driver page and I found out, that Tempro is only available for Vista 32bit, not for 64bit.
    So I think Tempro will not work on a 64bit OS.
    Bye!

Maybe you are looking for