Will Boot Camp function after upgrade to Mavericks?
Planning on upgrading from Snow Leopard 10.6.8 to Mavericks.
I now have Windows XP on my Boot Camp partition. I also use an old version (2.0.8) of VMware Fusion to access the same BootCamp WinXP. I rarely use Windows & I know my old version of VMware will not work. Would need to purchase a new version (6.x) for ~ $60.00.
But, I’m hoping I could still Option Boot into my BootCamp Windows.
Am I correct? Or after upgrading to Mavericks, will I be unable to boot into Windows w/o a bunch of fixes & troubleshooting?
Regards,
Steve
Thanks!
Fingers crossed.
As soon as I purchase iBank I will do the upgrade. Will make a bootable clone just b4 I do the upgrade.
Will run Repair Permissions as well.
Probably late tonight or Monday.
Similar Messages
-
Cannon MP830 can't use the scanner function after upgrading to Mavericks.
I have an Cannon MP830 and now I can't use the scanner function after upgrading to Mavericks. Can someone help?
There is no ICA driver for this model so you won't be able to use Image Capture or Preview. But there is a TWAIN scanner driver and the supporting MP Navigator application available for 10.8 from Canon, so you could try installing these and see if you can scan again.
-
Lost Boot Camp partition after upgrading to OS X Mavericks
History:
I had Windows 8 installed on Boot Camp. For some reason I had to enable Bit Locker in Windows that required me to create a partition using Windows Disk Utility. The Windows Disk Utility created the partition but then there was mismatch between GPT and MBR Records.
The system was working as expected.
What Happened:
I decided to upgrade my OS X to the latest version Mavericks 10.9, that owerwritten the MBR Records and updated GPT I guess.
The Windows BootCamp partition disappeared. Only OS I could use is Mac OS X.
Current Situation:
I have been trying many tools so might have further spoiled the situation.
Out put from some of the utilities
sudo fdisk /dev/disk0
Disk: /dev/disk0 geometry: 31130/255/63 [500118192 sectors]
Signature: 0xAA55
Starting Ending
#: id cyl hd sec - cyl hd sec [ start - size]
1: EE 0 0 2 - 1023 254 63 [ 1 - 409639] <Unknown ID>
2: AF 1023 254 63 - 1023 254 63 [ 409640 - 195312496] HFS+
3: 07 1023 254 63 - 1023 254 63 [ 196993024 - 302407680] HPFS/QNX/AUX
4: 07 1023 254 63 - 1023 254 63 [ 499400704 - 714752] HPFS/QNX/AUX
sudo gdisk /dev/disk0
print
Disk /dev/disk0: 500118192 sectors, 238.5 GiB
Logical sector size: 512 bytes
Disk identifier (GUID): 67A9C2D9-CEE1-49DD-8EE8-84881E7456AC
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 500118158
Partitions will be aligned on 8-sector boundaries
Total free space is 2013 sectors (1006.5 KiB)
Number Start (sector) End (sector) Size Code Name
1 40 409639 200.0 MiB EF00 EFI System
2 409640 195722135 93.1 GiB AF00 Apple HFS/HFS+
3 195722136 196991671 619.9 MiB AB00 Apple boot
4 196993024 500117503 144.5 GiB 0700 Microsoft basic data
TestDisk Output
Disk /dev/disk0 - 256 GB / 238 GiB - 500118192 sectors (RO)
Partition Start End Size in sectors
>P EFI System 40 409639 409600 [EFI]
P Mac HFS 409640 195722135 195312496
P Mac HFS 195722136 196991671 1269536
Mac HFS 196991676 198261211 1269536
MS Data 196993024 500117503 303124480
MS Data 498685953 499400704 714752
Mac HFS 498848616 500118151 1269536
MS Data 499400704 500115455 714752
sudo gpt -r -vv show /dev/disk0
gpt show: /dev/disk0: mediasize=256060514304; sectorsize=512; blocks=500118192
gpt show: /dev/disk0: PMBR at sector 0
gpt show: /dev/disk0: Pri GPT at sector 1
gpt show: /dev/disk0: Sec GPT at sector 500118191
start size index contents
0 1 PMBR
1 1 Pri GPT header
2 32 Pri GPT table
34 6
40 409600 1 GPT part - C12A7328-F81F-11D2-BA4B-00A0C93EC93B
409640 195312496 2 GPT part - 48465300-0000-11AA-AA11-00306543ECAC
195722136 1269536 3 GPT part - 426F6F74-0000-11AA-AA11-00306543ECAC
196991672 1352
196993024 303124480 4 GPT part - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7
500117504 655
500118159 32 Sec GPT table
500118191 1 Sec GPT header
Thanks a ton in advance.Further Information:
I haven't resolved the issue yet and still working on it.
The TestDisk detailed search revealed following information:
Mac HFS 196991668 198261203 1269536
> Mac HFS 196991676 198261211 1269536
MS Data 196993024 500117503 303124480 - found using backup sector
MS Data 498685953 499400704 714752- found using backup sector
Mac HFS 498848616 500118151 1269536- found using backup sector
MS Data 499400704 500115455 714752
MS Data 499473315 499479488 6174- found using backup sector
MS Data 499479488 499485661 6174 [Boot]
Thank you. -
Will my bootcamp continue functioning after upgrading to Mavericks?
Hello, everybody!
I have an early 2011 13-inch MacBook Pro running Lion and I consider upgrading to Mavericks. The "problem" is that I also have Windows installed on the computer via Bootcamp and I would like to know if this is supposed to continue working after the upgrade. My current Bootcamp version is 4.0.1. and I have Windows 7-32bit.
Thank you in advanceYes, it is. Back up everything first in case a problem occurs.
(110927) -
Boot camp lost after upgrading to Yosemite from mountain lion
I lost my windows7 boot camp after I upgrade to Yosemite from mountain lion. When I press ALT when rebooting there is no more alternative to boot for window anymore. I did read some thread about this but my case is different since when I tried to type 3 steps(diskutil.......etc) as LonerT user answers it did not work. The attached files here are what I faced with. Please help. I have a lot of important files in windows
If you look at the GAP between GPT3 and GPT4 it is start/size of 782929176/37595880 but the NTFS header starts at 782929920 according to your Testdisk output shown here.
MS Data 782929920 976773112 193843193
The difference is 782929920 - 782929176 = 744 bytes. You will need to delete the current GPT4 and recreate a new GPT4. Please stop if you see any error messages and post here.
1. Delete the old entry and create a new entry at GPT#4.
sudo gdisk /dev/disk0
p
d
4
n
4
782929920
976773112
0700
p
w
y
Here is an example of the delete/new...
Command (? for help): d
Partition number (1-4): 4
Command (? for help): n
Partition number (4-128, default 4): 4
First sector (34-1954210086, default = 1454210080) or {+-}size{KMGTP}: 1454211072
Last sector (1454211072-1954210086, default = 1954210086) or {+-}size{KMGTP}: 1954209791
Current type is 'Apple HFS/HFS+'
Hex code or GUID (L to show codes, Enter = AF00): 0700
Changed type of partition to 'Microsoft basic data'
Command (? for help): p
Disk /dev/disk0: 1954210120 sectors, 931.8 GiB
Logical sector size: 512 bytes
Disk identifier (GUID): 6ED0C429-00D1-4759-B50E-04B6FB80D0E3
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 1954210086
Partitions will be aligned on 8-sector boundaries
Total free space is 1293 sectors (646.5 KiB)
Number Start (sector) End (sector) Size Code Name
1 40 409639 200.0 MiB EF00 EFI System Partition
2 409640 1452940543 692.6 GiB AF00 Customer
3 1452940544 1454210079 619.9 MiB AB00 Recovery HD
4 1454211072 1954209791 238.4 GiB 0700 Microsoft basic data
2. This is a tedious process and you want to check after the second 'p'rint command that it looks reasonable, before the 'w'rite and 'y'es to confirm.
3. You will need to reboot after the change, because the disk you are booted from is the one being modified. Reboot will rebuild disk0s4 using the start/end you entered.
4. Run the dd command - sudo dd if=/dev/rdisk0s4 count=1 2>/dev/null | hexdump -C and check that the first line contains "R.NTFS".
5. Once you have a working GPT#4, a new hybrid MBR needs to be created which will overwrite what you see in your Fdisk output. This is also done using GPT Fdisk (Gdisk). Your numbers will look different than what are in the following example. In most cases, you will use the default except entry 4, which should have a 'y' for bootable flag.
sudo gdisk /dev/disk0
GPT fdisk (gdisk) version 0.8.10
Warning: Devices opened with shared lock will not have their
partition table automatically reloaded!
Partition table scan:
MBR: hybrid
BSD: not present
APM: not present
GPT: present
Found valid GPT with hybrid MBR; using GPT.
Command (? for help): p
Disk /dev/disk0: 490234752 sectors, 233.8 GiB
Logical sector size: 512 bytes
Disk identifier (GUID): 59BDFEEB-1EB4-4529-94FE-3CBC2C3CD513
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 490234718
Partitions will be aligned on 8-sector boundaries
Total free space is 2604 sectors (1.3 MiB)
Number Start (sector) End (sector) Size Code Name
1 40 409639 200.0 MiB EF00 EF
2 409640 401060383 191.0 GiB AF05 Macintosh HD
3 401060384 402329919 619.9 MiB AB00 Re
4 402331648 490233848 41.9 GiB 0700 Microsoft basic data
Command (? for help): r
Recovery/transformation command (? for help): h
WARNING! Hybrid MBRs are flaky and dangerous! If you decide not to use one,
just hit the Enter key at the below prompt and your MBR partition table will
be untouched.
Type from one to three GPT partition numbers, separated by spaces, to be
added to the hybrid MBR, in sequence: 2 3 4
Place EFI GPT (0xEE) partition first in MBR (good for GRUB)? (Y/N): y
Creating entry for GPT partition #2 (MBR partition #2)
Enter an MBR hex code (default AF): AF
Set the bootable flag? (Y/N): n
Creating entry for GPT partition #3 (MBR partition #3)
Enter an MBR hex code (default AB): AB
Set the bootable flag? (Y/N): n
Creating entry for GPT partition #4 (MBR partition #4)
Enter an MBR hex code (default 07): 07
Set the bootable flag? (Y/N): y
Recovery/transformation command (? for help): w
Final checks complete. About to write GPT data. THIS WILL OVERWRITE EXISTING
PARTITIONS!!
Do you want to proceed? (Y/N): y
OK; writing new GUID partition table (GPT) to /dev/disk0.
Warning: Devices opened with shared lock will not have their
partition table automatically reloaded!
Warning: The kernel may continue to use old or deleted partitions.
You should reboot or remove the drive.
The operation has completed successfully.
6. a. Test 1 - Can you see your Bootcamp volume in Finder.
b. Test 2 - Can you files in the Bootcamp volume?
c. Test 3 - Can you see Bootcamp in your System Preferences -> Startup Disk.
d. Test 4 - If Test 1-3 are successful, select Bootcamp and click on Restart. You may need Windows startup repair, if you see a hanging underline cursor at the top left corner of your screen. In most cases, it is not required.
Here is an example...
Command (? for help): d
Partition number (1-4): 4
Command (? for help): n
Partition number (4-128, default 4): 4
First sector (34-1954210086, default = 1454210080) or {+-}size{KMGTP}: 1454211072
Last sector (1454211072-1954210086, default = 1954210086) or {+-}size{KMGTP}: 1954209791
Current type is 'Apple HFS/HFS+'
Hex code or GUID (L to show codes, Enter = AF00): 0700
Changed type of partition to 'Microsoft basic data'
Command (? for help): p
Disk /dev/disk0: 1954210120 sectors, 931.8 GiB
Logical sector size: 512 bytes
Disk identifier (GUID): 6ED0C429-00D1-4759-B50E-04B6FB80D0E3
Partition table holds up to 128 entries
First usable sector is 34, last usable sector is 1954210086
Partitions will be aligned on 8-sector boundaries
Total free space is 1293 sectors (646.5 KiB)
Number Start (sector) End (sector) Size Code Name
1 40 409639 200.0 MiB EF00 EFI System Partition
2 409640 1452940543 692.6 GiB AF00 Customer
3 1452940544 1454210079 619.9 MiB AB00 Recovery HD
4 1454211072 1954209791 238.4 GiB 0700 Microsoft basic data -
My cannon MF8350 will no longer print after upgrading to mavericks
My printer is on a network that was running fine with Mountain Lion. Yesterday I upgraded to OS X and now when I go to print I get the message, "printer is not responding." I've tried restarting the computer, the printer, reloading the printer to the network using bonjure. It finds the printer on the network but I still get the message when I go to print a document.
I suspect that an old driver is in use. Try Resetting Print System and then add again and try printing.
http://support.apple.com/kb/ht1341 -
IMac wont start up after upgrade to Mavericks
I installed Mavericks as an upgrade to OS X 10.6.8 on my iMac and with in a half an hour of use my computer froze, I have tried all the normal rebooting techniques but my opening screen still has the vertical green stripes, even after using the disk repair/first aid utility, the iMac freezes without fully booting. the disk repair found no issues and says all is OK.
Hello Tone56,
It sounds like you are unable to successfully boot your computer after upgrading to Mavericks, and are seeing some graphical anomolies on startup. I recommend starting by resetting your PRAM with this article:
OS X Mavericks: Reset your computer’s PRAM
http://support.apple.com/kb/ph14222
Note: To print these instructions, open Help Viewer’s Action pop-up menu (looks like a gear), then choose Print.
Shut down your Mac.
Locate the following keys on the keyboard: Option, Command (⌘), P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on your Mac.
Immediately press and hold the Option-Command-P-R keys. You must press this key combination before the gray screen appears.Continue holding the keys down until your Mac restarts, and you hear the startup sound for the second time.
Release the keys.
Resetting PRAM may change some system settings and preferences. Use System Preferences to restore your settings.
Then reset your SMC:
Intel-based Macs: Resetting the System Management Controller (SMC)
http://support.apple.com/kb/ht3964
Resetting the SMC for Mac Pro, Intel-based iMac, Intel-based Mac mini, or Intel-based Xserve
Shut down the computer.
Unplug the computer's power cord.
Wait fifteen seconds.
Attach the computer's power cord.
Wait five seconds, then press the power button to turn on the computer.
If the issue persists, try performing a Safe Boot then restart as normal to see if that will allow you to boot normally:
OS X: What is Safe Boot, Safe Mode?
http://support.apple.com/kb/ht1564
Starting up in Safe Mode
To start up into Safe Mode (to Safe Boot), follow these steps.
Be sure your Mac is shut down.
Press the power button.
Immediately after you hear the startup tone, hold the Shift key.
The Shift key should be held as soon as possible after the startup tone, but not before the tone.
Release the Shift key when you see the gray Apple logo and the progress indicator (looks like a spinning gear).
After the logo appears, you should see a progress bar during startup. This indicates that your computer is performing a directory check as part of Safe Mode.
To leave Safe Mode, restart your computer without holding any keys during startup.
Thank you for using Apple Support Communities.
Cheers,
Sterling -
IPhoto no longer work after upgrading to Mavericks.
My iPhoto will no longer work after upgrading to Mavericks. iPhoto will not update. How do I fix this?
kmg55 wrote:
Just upgraded and Iphoto will not work,
Check that iPhoto is v9.5.1 (In Applications, highlight iPhoto, and ⌘I)
If it is v9.5.1, then hold option-command and click the iPhoto icon and go through the repair steps. -
After upgrading to maverick; help & other functions not working
After upgrading to maverick; help and other functions not working?
Sometimes just closing and reopening the Help window will clear up the problem. If it doesn't, log out or restart the computer and try again. Otherwise, you may need to delete the Help cache.
Back up all data.
Triple-click anywhere in the line below on this page to select it:
~/Library/Caches/com.apple.helpd
Right-click or control-click the highlighted line and select
Services ▹ Reveal
from the contextual menu.* A Finder window should open with a folder selected. Move the selected folder to the Trash. Log out, log back in, and test. Help pages will be slow to load at first.
If that doesn't work, the problem may be caused by network conditions. It may go away by itself, though I can't say how long you should wait.
A persistent failure to load help data has been reported as an issue with satellite networks. Test on a different network, if possible. I've also seen at least one report that Photo Stream in iCloud can mysteriously interfere with Help. I'm not sure whether that's true, but try disabling Photo Stream, if applicable.*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combinationcommand-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return. -
After upgrade to Maverick, my macbookpro sometimes will shut down without notice then restart again. During restart it says I have some error so it is shutting down. Dunno what heck is going on here. It has been like this after I updated to Maverick.
What happens? So regret to upgrade to Maverick.
Any help is much appreciated.
Report show this msg:
Anonymous UUID:
AEC00440-A382-ADBC-222D-0C26332AAB85
Thu Apr 3 22:02:40 2014
panic(cpu 3 caller 0xffffff7fa039bfb0): "GPU Panic: [<None>] 5 3 7f 0 0 0 0 3 : NVRM[0/1:0:0]: Read Error 0x00000100: CFG 0xffffffff 0xffffffff 0xffffffff, BAR0 0xc0000000 0xffffff80bdb05000 0x0a5480a2, D0, P3/4\n"@/SourceCache/AppleGraphicsControl/AppleGraphicsControl-3.4.35/src/Apple MuxControl/kext/GPUPanic.cpp:127
Backtrace (CPU 3), Frame : Return Address
0xffffff808e423230 : 0xffffff801e022fa9
0xffffff808e4232b0 : 0xffffff7fa039bfb0
0xffffff808e423380 : 0xffffff7f9ea22eab
0xffffff808e423440 : 0xffffff7f9eaec49a
0xffffff808e423480 : 0xffffff7f9eaec50a
0xffffff808e4234f0 : 0xffffff7f9ed6b056
0xffffff808e423620 : 0xffffff7f9eb0fb39
0xffffff808e423640 : 0xffffff7f9ea298fd
0xffffff808e4236f0 : 0xffffff7f9ea27408
0xffffff808e4238f0 : 0xffffff7f9ea29531
0xffffff808e4239e0 : 0xffffff7f9f9d37a0
0xffffff808e423a40 : 0xffffff7f9f9d0522
0xffffff808e423ad0 : 0xffffff7f9f9badf6
0xffffff808e423b10 : 0xffffff7f9f9b1d3b
0xffffff808e423b70 : 0xffffff801e4cc7b6
0xffffff808e423b90 : 0xffffff801e4cddb1
0xffffff808e423bf0 : 0xffffff801e4cb81f
0xffffff808e423d40 : 0xffffff801e0b6558
0xffffff808e423e50 : 0xffffff801e026bf1
0xffffff808e423e80 : 0xffffff801e0139f5
0xffffff808e423ef0 : 0xffffff801e01e043
0xffffff808e423f70 : 0xffffff801e0c976d
0xffffff808e423fb0 : 0xffffff801e0f3b46
Kernel Extensions in backtrace:
com.apple.driver.AppleMuxControl(3.4.35)[1BFF66C1-65E4-3BB3-9DEE-B61C3137019B]@0 xffffff7fa038e000->0xffffff7fa03a0fff
dependency: com.apple.driver.AppleGraphicsControl(3.4.35)[09897896-ACBD-36B5-B1D4-0CCC4000E 3B3]@0xffffff7fa0386000
dependency: com.apple.iokit.IOACPIFamily(1.4)[045D5D6F-AD1E-36DB-A249-A346E2B48E54]@0xfffff f7f9e928000
dependency: com.apple.iokit.IOPCIFamily(2.9)[EDA75271-4E9D-34E7-A2C5-14F0C8817D37]@0xffffff 7f9e6bb000
dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[4421462D-2B1F-3540-8EEA-9DFCB0565E39]@0 xffffff7f9e980000
dependency: com.apple.driver.AppleBacklightExpert(1.0.4)[E04639C5-D734-3AB3-A682-FE66694C66 53]@0xffffff7fa0389000
com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[80472F2E-D31D-32C4-88BA-2EB3D63C 159F]@0xffffff7f9e9d3000->0xffffff7f9ec3bfff
dependency: com.apple.iokit.IOPCIFamily(2.9)[EDA75271-4E9D-34E7-A2C5-14F0C8817D37]@0xffffff 7f9e6bb000
dependency: com.apple.iokit.IONDRVSupport(2.4.1)[999E29DA-D513-3544-89D1-9885B728A098]@0xff ffff7f9e9c3000
dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[4421462D-2B1F-3540-8EEA-9DFCB0565E39]@0 xffffff7f9e980000
com.apple.nvidia.classic.NVDANV50HalTesla(8.2.4)[B0E6AAA7-E970-3D81-8B43-145D56A 3A4AC]@0xffffff7f9ec46000->0xffffff7f9eeeffff
dependency: com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[80472F2E-D31D-32C4-88BA-2EB3D63 C159F]@0xffffff7f9e9d3000
dependency: com.apple.iokit.IOPCIFamily(2.9)[EDA75271-4E9D-34E7-A2C5-14F0C8817D37]@0xffffff 7f9e6bb000
com.apple.GeForceTesla(8.2.4)[B6C71E9A-E304-354B-80AD-C69C9032D367]@0xffffff7f9f 970000->0xffffff7f9fa3afff
dependency: com.apple.iokit.IOPCIFamily(2.9)[EDA75271-4E9D-34E7-A2C5-14F0C8817D37]@0xffffff 7f9e6bb000
dependency: com.apple.iokit.IONDRVSupport(2.4.1)[999E29DA-D513-3544-89D1-9885B728A098]@0xff ffff7f9e9c3000
dependency: com.apple.iokit.IOGraphicsFamily(2.4.1)[4421462D-2B1F-3540-8EEA-9DFCB0565E39]@0 xffffff7f9e980000
dependency: com.apple.nvidia.classic.NVDAResmanTesla(8.2.4)[80472F2E-D31D-32C4-88BA-2EB3D63 C159F]@0xffffff7f9e9d3000
BSD process name corresponding to current thread: WindowServer
Mac OS version:
13C64
Kernel version:
Darwin Kernel Version 13.1.0: Thu Jan 16 19:40:37 PST 2014; root:xnu-2422.90.20~2/RELEASE_X86_64
Kernel UUID: 9FEA8EDC-B629-3ED2-A1A3-6521A1885953
Kernel slide:
0x000000001de00000
Kernel text base: 0xffffff801e000000
System model name: MacBookPro6,2 (Mac-F22586C8)
System uptime in nanoseconds: 850827343616
last loaded kext at 264945197388: com.apple.filesystems.msdosfs
1.9 (addr 0xffffff7fa04a6000, size 65536)
last unloaded kext at 543414599453: com.apple.driver.AppleIntelMCEReporter
104 (addr 0xffffff7fa049e000, size 32768)
loaded kexts:
com.apple.driver.AudioAUUC
1.60
com.apple.driver.AppleHWSensor
1.9.5d0
com.apple.driver.AGPM
100.14.15
com.apple.filesystems.autofs
3.0
com.apple.driver.AppleMikeyHIDDriver
124
com.apple.driver.AppleHDA
2.6.0f1
com.apple.GeForceTesla
8.2.4
com.apple.driver.AppleUpstreamUserClient
3.5.13
com.apple.driver.AppleMuxControl
3.4.35
com.apple.driver.ACPI_SMC_PlatformPlugin
1.0.0
com.apple.driver.AppleMikeyDriver
2.6.0f1
com.apple.driver.AppleLPC
1.7.0
com.apple.driver.AppleIntelHDGraphics
8.2.4
com.apple.driver.AppleIntelHDGraphicsFB
8.2.4
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport
4.2.3f10
com.apple.iokit.IOUserEthernet
1.0.0d1
com.apple.iokit.IOBluetoothSerialManager
4.2.3f10
com.apple.Dont_Steal_Mac_OS_X
7.0.0
com.apple.driver.AppleHWAccess
1
com.apple.driver.SMCMotionSensor
3.0.4d1
com.apple.driver.AppleSMCPDRC
1.0.0
com.apple.driver.AppleSMCLMU
2.0.4d1
com.apple.driver.AppleMCCSControl
1.1.12
com.apple.driver.AppleUSBTCButtons
240.2
com.apple.driver.AppleUSBCardReader
3.4.1
com.apple.driver.AppleUSBTCKeyboard
240.2
com.apple.driver.AppleIRController
325.7
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless
1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib
1.0.0d1
com.apple.BootCache
35
com.apple.iokit.SCSITaskUserClient
3.6.6
com.apple.driver.XsanFilter
404
com.apple.iokit.IOAHCIBlockStorage
2.5.1
com.apple.iokit.AppleBCM5701Ethernet
3.8.1b2
com.apple.driver.AppleUSBHub
666.4.0
com.apple.driver.AppleFWOHCI
4.9.9
com.apple.driver.AirPort.Brcm4331
700.20.22
com.apple.driver.AppleUSBEHCI
660.4.0
com.apple.driver.AppleAHCIPort
3.0.0
com.apple.driver.AppleSmartBatteryManager
161.0.0
com.apple.driver.AppleACPIButtons
2.0
com.apple.driver.AppleRTC
2.0
com.apple.driver.AppleHPET
1.8
com.apple.driver.AppleSMBIOS
2.1
com.apple.driver.AppleACPIEC
2.0
com.apple.driver.AppleAPIC
1.7
com.apple.driver.AppleIntelCPUPowerManagementClient
216.0.0
com.apple.nke.applicationfirewall
153
com.apple.security.quarantine
3
com.apple.driver.AppleIntelCPUPowerManagement
216.0.0
com.apple.AppleGraphicsDeviceControl
3.4.35
com.apple.kext.triggers
1.0
com.apple.driver.DspFuncLib
2.6.0f1
com.apple.vecLib.kext
1.0.0
com.apple.iokit.IOAudioFamily
1.9.5fc2
com.apple.kext.OSvKernDSPLib
1.14
com.apple.nvidia.classic.NVDANV50HalTesla
8.2.4
com.apple.nvidia.classic.NVDAResmanTesla
8.2.4
com.apple.iokit.IOFireWireIP
2.2.6
com.apple.driver.AppleHDAController
2.6.0f1
com.apple.iokit.IOHDAFamily
2.6.0f1
com.apple.driver.AppleBacklightExpert
1.0.4
com.apple.driver.AppleGraphicsControl
3.4.35
com.apple.driver.IOPlatformPluginLegacy
1.0.0
com.apple.iokit.IONDRVSupport
2.4.1
com.apple.iokit.IOBluetoothHostControllerUSBTransport
4.2.3f10
com.apple.iokit.IOSurface
91
com.apple.iokit.IOSerialFamily
10.0.7
com.apple.iokit.IOBluetoothFamily
4.2.3f10
com.apple.driver.IOPlatformPluginFamily
5.7.0d10
com.apple.driver.AppleSMC
3.1.8
com.apple.driver.AppleSMBusPCI
1.0.12d1
com.apple.driver.AppleSMBusController
1.0.11d1
com.apple.iokit.IOGraphicsFamily
2.4.1
com.apple.iokit.IOSCSIBlockCommandsDevice
3.6.6
com.apple.iokit.IOUSBMassStorageClass
3.6.0
com.apple.driver.AppleUSBMultitouch
240.9
com.apple.iokit.IOUSBHIDDriver
660.4.0
com.apple.driver.AppleUSBMergeNub
650.4.0
com.apple.driver.AppleUSBComposite
656.4.1
com.apple.iokit.IOSCSIMultimediaCommandsDevice
3.6.6
com.apple.iokit.IOBDStorageFamily
1.7
com.apple.iokit.IODVDStorageFamily
1.7.1
com.apple.iokit.IOCDStorageFamily
1.7.1
com.apple.iokit.IOAHCISerialATAPI
2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily
3.6.6
com.apple.iokit.IOEthernetAVBController
1.0.3b4
com.apple.driver.mDNSOffloadUserClient
1.0.1b5
com.apple.iokit.IOUSBUserClient
660.4.2
com.apple.iokit.IOFireWireFamily
4.5.5
com.apple.iokit.IO80211Family
630.35
com.apple.iokit.IONetworkingFamily
3.2
com.apple.iokit.IOUSBFamily
675.4.0
com.apple.iokit.IOAHCIFamily
2.6.5
com.apple.driver.AppleEFINVRAM
2.0
com.apple.driver.AppleEFIRuntime
2.0
com.apple.iokit.IOHIDFamily
2.0.0
com.apple.iokit.IOSMBusFamily
1.1
com.apple.security.sandbox
278.11
com.apple.kext.AppleMatch
1.0.0d1
com.apple.security.TMSafetyNet
7
com.apple.driver.AppleKeyStore
2
com.apple.driver.DiskImages
371.1
com.apple.iokit.IOStorageFamily
1.9
com.apple.iokit.IOReportFamily
23
com.apple.driver.AppleFDEKeyStore
28.30
com.apple.driver.AppleACPIPlatform
2.0
com.apple.iokit.IOPCIFamily
2.9
com.apple.iokit.IOACPIFamily
1.4
com.apple.kec.corecrypto
1.0
com.apple.kec.pthread
1
Model: MacBookPro6,2, BootROM MBP61.0057.B0C, 2 processors, Intel Core i7, 2.66 GHz, 4 GB, SMC 1.58f16
Graphics: Intel HD Graphics, Intel HD Graphics, Built-In, 288 MB
Graphics: NVIDIA GeForce GT 330M, NVIDIA GeForce GT 330M, PCIe, 512 MB
Memory Module: BANK 0/DIMM0, 2 GB, DDR3, 1067 MHz, 0x802C, 0x31364A53463235363634485A2D3147314631
Memory Module: BANK 1/DIMM0, 2 GB, DDR3, 1067 MHz, 0x802C, 0x31364A53463235363634485A2D3147314631
AirPort: spairport_wireless_card_type_airport_extreme (0x14E4, 0x93), Broadcom BCM43xx 1.0 (5.106.98.100.22)
Bluetooth: Version 4.2.3f10 13477, 3 services, 15 devices, 1 incoming serial ports
Network Service: AirPort, AirPort, en1
Serial ATA Device: Hitachi HTS545050B9SA02, 500.11 GB
Serial ATA Device: MATSHITADVD-R UJ-898
USB Device: Hub
USB Device: Apple Internal Keyboard / Trackpad
USB Device: Internal Memory Card Reader
USB Device: BRCM2070 Hub
USB Device: Bluetooth USB Host Controller
USB Device: Hub
USB Device: USB Optical Mouse
USB Device: Built-in iSight
USB Device: IR Receiver
Thunderbolt Bus:nana4design,
some 15-inch Mid 2010 MacBook Pros are known to have a defective NVIDIA GPU. Since you’re getting GPU panics, yours might be one with the defect. Apple had a gratis servicing program for this model’s defect that lasted for three years from the date of the MacBook Pro’s purchase; they still offer the servicing program, but it is no longer guaranteed to be gratis. I’d recommend making an appointment at your nearest Apple store, to have them run their Video System Test on your MacBook Pro to confirm whether or not its NVIDIA GPU has this defect. -
After upgrading to Mavericks I find that the Epson Scan software will no longer run so I cannot now use my Epson Perfection V500 Photo scanner. Is there a solution to this? If not can I delete Mavericks and go back to Mountain Lion?
Hi...
Epson is working on new drivers / software for this scanner.
Until then, you can perform basic scanning from Image Capture.
Or go for 3rd party app. like vuescan.
Regards
Dennis -
Screen flickers after boot camp 2.1 upgrade
I have been running boot camp 2.0 and WinXP for a few weeks on my iMac 24" 3.06 Ghz 4 Gb running 10.5.5. I had installed the nvidia 177.98 drivers and they improved gaming performance and work great.
I installed the boot camp 2.1 upgrade and the video drivers changed back to the boot camp 2.1 drivers. I re-installed the nvidia 177.98 drivers.
I now have two issues:
1. the monitor is listed as generic plug and play. Is there a driver for the iMac 24" display?
2. My room is dark so I use F1 to reduce the screen brightness. The whole screen flickers or flashes continuously. IF i have the brightness up near make the flickers or flashing stops. Anyone sen this or have any thoughts?
If i can't stop the flickering and flashing, I will eventually delete the WinXP system and re-create it and stick with boot camp 2.0.
..BobBefore you re-do everything consider other options.
This is the procedure for uninstalling and installing drivers. A program called driver sweeper is required. To uninstall your old drivers you must boot into safe mode, uninstall your old drivers, use driver sweeper to eliminate any remaining fragments of your driver and then install new driver.
http://www.guru3d.com/category/driversweeper/
http://forums.guru3d.com/forumdisplay.php?f=29
Maybe you need to do 2.1 first? or use later drivers?
nVIDIA ForceWare X 179.13 for Windows XP/2K 32bit
http://www.laptopvideo2go.com/drivers/xp/179.13
In the future, you might want to use something to regularly backup, but for now, WinClone can take a full snapshot image for restore, and runs in OS X. DataBackupPC from Prosoft Engineering (Data Rescue II folks) or similar backup / cloning software (Acronis doesn't support GPT and EFI, so no Mac support). -
Macbook 2012 Mid: Can't mount USB mass storage after upgrading to Mavericks
Hi guys,
I'm having big problems with USB mass storages. After upgrading to Mavericks my Mac doesn't see some USB storage devices (mostly USB sticks and Android phone's memory cards via USB. My external USB 3.0 hard disks work fine) at all even though the devices themselves (for example my Android phone) are clearly recognized according to the System Report. When I plug them in, they don't show up on my Finder or on Disk Utility.
I've searched everywhere and it seems like some other people are having the same problem, none seems to offer a definite solution. I've even formatted my HD and reinstalled Mavericks from the recovery partition. Now it mounts a USB stick that was in one of the USB ports at the time of installation but still doesn't read anything else! The funny thing is when I boot into Windows 8 on my Boot Camp partition, I can mount any USB devices including the USB stick and the Android phone I'm having problems on Mavericks without any problems. I can even see then when I boot into the recovery so there's clearly something wrong with Mavericks.
Any chance someone has figured out a solution for this? Apple should've address this long time ago.Please read this whole message before doing anything.
This procedure is a diagnostic test. It’s unlikely to solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
The purpose of the test is to determine whether the problem is caused by third-party software that loads automatically at startup or login, by a peripheral device, by a font conflict, or by corruption of the file system or of certain system caches.
Disconnect all wired peripherals except those needed for the test, and remove all aftermarket expansion cards, if applicable. Start up in safe mode and log in to the account with the problem. You must hold down the shift key twice: once when you turn on the computer, and again when you log in.
Note: If FileVault is enabled, or if a firmware password is set, or if the startup volume is a Fusion Drive or a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
Test while in safe mode. Same problem? Note: If the devices are not in Mac OS X format, they normally won't mount in safe mode, but they should appear in Disk Utility.
After testing, restart as usual (not in safe mode) and verify that you still have the problem. Post the results of the test. -
Can't log in after upgrading to mavericks
After upgrading to Mavericks, I at first seemed to lose the 2nd HD (all data), then list the ability to log in
Help!If the user account is associated with an Apple ID, and you know the Apple ID password, then maybe the Apple ID can be used to reset your user account password.
Otherwise*, boot into Recovery mode. When the OS X Utilities screen appears, select
Utilities ▹ Terminal
from the menu bar. In the window that opens, type this:
res
Press the tab key. The partial command you typed will automatically be completed to this:
resetpassword
Press return. A Reset Password window opens. Close the Terminal window to get it out of the way.
Select your boot volume ("Macintosh HD," unless you gave it a different name) if not already selected.
Select your username from the menu labeled Select the user account if not already selected.
Follow the prompts to reset the password. It's safest to choose a password that includes only the characters a-z, A-Z, and 0-9.
Select
▹ Restart
from the menu bar.
You should now be able to log in with the new password, but your Keychain will be reset (empty.) If you've forgotten the Keychain password (which is ordinarily the same as your login password), there's no way to recover it.
*Note: If you've activated FileVault, this procedure doesn't apply. Follow instead these instructions. -
Why does the migration wizard run every time I start up my mac after upgrading to mavericks ?
After upgrading to Mavericks, I log in as normal but then a migration wizard starts up asking me where I want to import data from and create new accounts. Why and how do I stop it ?
It could be part of OS X's Resume feature. Any app that is open at shutdown will re-open on boot unless the tick in the following image is deselected when shutting down/restarting:
Also check that Migration Assistant isn't listed in System Preferences>Users & Groups>Login Items.
Maybe you are looking for
-
LaserJet 1200 Econo Mode 300 dpi 600 dpi
I just got a new HP tower, and when I hooked up the Laserjet 1200 series printer, It's printing very dark. I went into the control panel, as I had done in the past, and it doesn't show the economode tab for the toner, it says 300 dpi, 600 dpi, I've t
-
Problem with External Hard Drive - Firewire
I have a problem with a *300GB Venus DS3 Hard Disk* / USB 2.0 - Firewire 400 (not sure if 400). I have a +Mac G4 (1GHz Power PC G4 / 1GB DDR SDRAM)+ running +Mac OS 10.3.9.+ I connect Venus hard disk through USB cable and no problem. But when I want
-
Sales standard analysis and debit memo
Hi colleagues, In case when I create debit memo regarding an invoice in standard analysis, I get wrong billing qty. For example when I start MC+E and I sold and billed 100PC of material X which is 1.000,00$ in MC+E I get Gross Sales 1.000,00$ and Bil
-
We have Windows Active Directory running here. I think I got the mac mini connected properly to active directory, I can login as AD users and that seems to work ok. My problem is the home folder. I need it to be set to a network location, not local.
-
Update calendar with holiday problem
Hi Experts, I have a small problem, I'm not managing to add a holiday into my holiday calendar. In SCAL in public holiday - my holidays is well created but when i want to edit holiday calendar I'm chosing the calendar and then i have a screen to assi