Will boot image on external drive work for powerbook g4

I've recently upgraded to a Powerbook G4 17-inch computer. Prior to that I had a Mac mini with tiger running on it. I used Carbon Copy Cloner to backup the mac mini to an external HD via firewire. Is it possible for me to boot my powerbook g4 from the external HD with 10.4 created on the mac mini?

Yes, it's possible but illegal. The software licensing agreement only permits installing OS X on a single CPU at a time.

Similar Messages

Will Mac allow you to boot from an external drive...specifically for windows programs?

Will a new Mac allow you to boot from an external drive...specifically for windows programs?

ps...I've read the threads on Bootcamp.

Does all external hard drives work for mac?

I am buying a imac i want to know weather all external hard drives work for mac?

Not with equal reliability. Avoid Western Digital.
Most reliable are these:
http://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATA_FW800_FW400_USB
Search their site for various alternatives.

Mac Mini i7 (Mavericks) will not boot from the external drive

Mac Mini i7 (Mavericks) will not boot from the external drive with Disk Warroir 4.4. or Drive Genius or Lion.
Not even from the external Firewire hard drive with Mavericks

Does the external HD have a GUID partition table?
Is the external drive formatted Mac OS X Extended (journaled)?
Is this a 2011 or late 2012 Mac?
How was Mavericks installed on the external drive?
Who is the builder of the drive mechanism in the external drive?
Who is the builder of the external enclosure?
What type of interface does the external drive have USB2, USB3, Firewire 400, Firewire 800, thunderbolt?
Is the external enclosure directly connected to the mini?
Have youtried a different interface cable?

HT201758 Will a USB3 External Drive work in the USB2 port?

Will a USB3 External Drive work in the USB2 port?

Some do and some do not. You should read the technical information carefully to determine if it's USB 2.0 compatible.

Can I boot from an external drive with a "Virtual CD"

I just purchased a Hitachi LifeStudio external hard drive for use as my Time Machine backup. When I plugged it in to my MacBook running 10.6.4, I realized that it had one of those "Virtual CDs" that contained the manufacturers crapware, similar to Western Digital's MyWare or whatever its called. It shows up in disk utility as an actual separate disk and not just another partition that can be wiped.
I reformatted the drive using GUID and and created 3 HFS+ Journaled partitions. One was going to be for the 10.6 installer, one for the 10.6 boot, and one for my time machine backup. I restored a 10.6 install dvd disk image I created using disk utility to the 10.6 installer partition (with erase destination checked) then option booted my mac and the partitions did not show up. The only thing I could see was my internal hard drive.
I have done this many times before and it has always worked so Im trying to figure out what Im doing wrong. The only thing I can think of is that the "Virtual CD" that Hitachi put on this external drive is stopping the Mac from seeing the bootable partitions I created. I even went into system preferences>startup disk and blessed the 10.6 install partition. That didn't work either, the computer just booted to my internal drive.
So my questions are. Is it because of this "Virtual CD" that I can't boot from my external drive? If so, is there a way around it? I already searched their web site and emailed their tech support asking for a firmware update to remove the virtual cd.
Thanks in advance.

Yes, it's a known issue. You've already referred to the issue with WD systems. WD has a long list of products that are either not compatible with Macs or won't boot a Mac.
There are practically no problems with bare drives, but once installed in an enclosure there is no guarantee that the package will function as a bootable device. This is especially the case if the manufacturer uses some sort of "virtual" scheme intended for using the device as a sort of one button backup device.
External drives don't have to specifically say anything about being Mac bootable or compatible. It's up to the consumer to verify compatibility and usability.

How do I boot from an external drive?

I've just Carbon Cloned my 60GB drive to a firewire external drive. I'm about to replace the 60GB with a 160GB drive and the CCC instructions say boot from the external drive I'd just created once the new disk is installed. Then CCC the cloned drive back to the new hard drive.
So, how do I boot from an external drive? Do I have load anything to the new drive? Will the macbook detect the external drive and boot from that? Or what??????
Thanks
Dick

Thanks DWB. Being the rash impetuous guy I am I didn't wait for replies and just switched on the macbook after installing the new disk (which was so easy it was unbelievable - had to go and buy a a little torx bit though) to see what would happen.
Blow me down with a feather if it didn't just boot off the external drive all by itself :-O It did come up with the disk was unverified and I could see it in FINDER and I was prseented with a screen to ERASE/RESTORE etc.
When I went to CCC the external drive back to the new hard drive it didn't give show me the new hard drive so I guessed I'd have to do something to format (?) the hard drive.
I don't know if I did the right thing but I went to disk utilities and chose ERASE in the vague hope it would maybe format the disk in some way.
Seems to work now and the CCC replaced the system perfectly as far as I can see.
Basically very impressive all round. Piece of proverbial to replace the disk and CCC made life so easy.
Thanks again.
Cheers
Dick

Trying to restore image from external drive

I made a backup image in Windows 7, and stored it on my external WD 500gb My Book. Now, I've loaded the PC from the Recovery Disc, and it doesn't see or recognize my external HD. There's the option to install drivers for the external device, but WD says they don't have the drivers.......they should be included in Windows. Anyone else have this problem?
P.S. The external drive works fine besides this.

Have you made another image backup or scheduled Windows Backup on the external hard drive or the other partition?
You may pay attention to the prompt information when backup.
Keeping different versions of system images
If you're saving your system images on an internal or external drive, or on CDs or DVDs, you can keep several versions of system images. On internal and external hard drives, older system images will be deleted when the drive runs out of space. To help conserve disk space, you can manually delete older system images. For more information, see What backup settings should I use to maximize my disk space?
If you're saving your system images in a network location, you can only keep the most current system image for each computer. System images are saved in the format of drive\WindowsImageBackup\computer name\. If you have an existing system image for a computer and are creating a new one for the same computer, the new system image will overwrite the existing one. If you want to keep the existing system image, you can copy it to a different location before creating the new system image by following these steps:
1. Navigate to the location of the system image.
2. Copy the WindowsImageBackup folder to a new location.
Arthur Xie - MSFT

Is there way to store my movies on my Time Capsule instead of laptop drive? I will then run an external drive to backup Time Capsule.

Is there way to store and run my iMovies on my Time Capsule instead of laptop drive? I will then run an external drive to backup Time Capsule as my backup. I want to dothis because my hard drive is full and I still have many movies to import form camcorder.

I do not know about iMovie, but the experts in the iPhoto and Aperture support areas strongly advise against trying to install your "working" image library on the Time Capsule.
You might want to ask about this in the iMovie support area.
iMovie for Mac
It would be much easier and much better if you use the external drive to connect to your Mac via USB or FireWire and then store the movies there.
Then, Time Machine will back up both your Mac and the external hard drive automatically once you tell it to do so.

What external drives work well with a late 2011 MacBook Pro? I ask because I just found out the hard way that a Samsung EVO 840 does not. Also should I avail myself of something that works with Thunderbolt or Firewire?

What external drives work well with a late 2011 MacBook Pro (I7, Lion OS) apart from my Kingston flash and USB drive, and the SD drives that I use in my cameras and recording devices? I ask because I just found out the hard way that a Samsung EVO 840 does not. Also, should I avail myself of something that works with the Thunderbolt or Firewire connections? I'm looking to back up music and video files created and/or processed in Logic Pro and the Adobe Production Premium software suite (Premier Pro, After Effects, Audition, etc).

Hmm, not sure what problems you had installing this drive. The review here gives it good marks for Mac:
http://www.amazon.com/Samsung-Electronics-EVO-Series-2-5-Inch-MZ-7TE1T0BW/produc t-reviews/B00E3W16OU
There does seem to be a lot of prep to make it work:
"1. Preparation to install your new shiny SSD
1.a You will need a migration tool (I used the Sabrent kit USB 3.0 to Sata that was suggested in these review) see link http://www.amazon.com/gp/product/B00DQJME7Y/ref=oh_details_o03_s01_i01?ie=UTF8&p sc=1
1.b You will need to download a trim enabler (mid 2012 macbooks only support native trim with apple brand ssd's) I recommend going to cindori.org and downloading trim enabler version 3.xx. You can do this step before or after the OS migration
1.c You cannot use the Samsung SSD migration software *don't worry Mac has its own imaging/migration utility*"
Also in those reviews:
" Only down side when using this product in a Mac Mini is you will be required to download and install Trim Enabler so that your drive performs optimally on your Mac device. This is an Apple issue, not Samsung, but it is an extra step you will have to take after you install the hard drive, and any time you perform an OS upgrade." He rant's on.
Personally I only deal with OWC:
http://eshop.macsales.com/shop/SSD/OWC/
They are very knowledgable and if there's a problem they will gladly take back the item. (Never happened to me yet - 8 years and counting).
Just upgraded my 13" MBP 2011 to 120 GB for $79. Adobe CS 6 opens in 3 seconds! Awesome!
When I was in Chicago I had a pro photographer for a client. She wound up with 4 internal drives in her Pro, 4 external drives and an dual array locked in a steel vault in the basement. All from OWC. OK she was a bit paranoid. Great client though.
As far as value for price:
http://eshop.macsales.com/item/OWC/MES3FH7500G/
500 GB for $130.
However as far as reliability is concerned:
http://www.rockpapershotgun.com/2014/01/30/are-ssds-reliable/
http://www.extremetech.com/computing/173887-ssd-stress-testing-finds-intel-might -be-the-only-reliable-drive-manufacturer
So sudden power loss is an issue with SSDs.
Personally I'd go with a moderate sized SSD internally and a conventional external for backup. An array would be the most reliable.

Elitebook 8440p - recovery disc creation & booting from an external drive

I have a brand new Elitebook 8440p & I have a couple of issues that I cannot seem to resolve.
1. I expected to get some sort of system install, or recovery or repair discs - or the ability to create such disks with this laptop. Nothing came with it, and I cannot find any place to create some sort of system recovery disks, nor is there anything listed for this laptop on the HP site to acquire them from HP. I am not comfortable having no way to recover this computer should a hard disk go south. Any ideas how to create or get an op system disk or recovery discs or something?
2. I have an encrypted company/business hard disc inside the laptop for work. I also have the original hard disk that came with the computer in an external eSata/USB case. I have configured and installed software on the external drive to include my personal software and programs, leaving the company hard disc inside the laptop for business use only. However, I cannot make this laptop boot from the external drive if the company drive is inside the laptop. I have read and tried everything, but if a drive is inside the laptop, it will not boot from the external eSata/USB drive. If I simply remove the laptop hard drive, it boots perfectly from the external drive via eSata and works fine. How do I manage to get this laptop to boot from my external drive without having to remove the internal hard drive?
Any help or ideas someone can offer are greatly appreciated. Thanks very much.

Hi, Rich:
If you live in the USA or Canada, you can get a set of restore disks from HP for $10. I am surprised you didn't get a set but maybe they only come with the business desktops.
Here is how you order them:
1. Write down the part number and serial # on bottom of the computer on the white tag. The model # is an HP-Compaq 8440p, but the part number will be found on that white tag below the serial #.
2. Call HP at 1-800-952-7689, option 1 (ordering restore disks is part of the list in the option).
3. Provide the info asked by the rep that answers the phone. Some just ask for the serial #, some want both, or they will just want the serial number and type of computer (8440p).
4. Have a Master Card or Visa ready for purchasing. They don't take Discover. You will be charged $10.00.
You will receive the disks by First Class Mail or you can pay an additional $10.00 for FedEx shipping.
Sorry, I can't answer your second question. I assume you have already tried hitting the F9 key at the HP splash screen to select the device to boot from?
Paul

Booting Windows from external drive

Hi all. I recently got an external Firewire 400 drive for backups, and it's just occurred to me that I could possibly run Windows off of it and reclaim some 60GB of internal hard drive space. I would like to know if this is possible. Yes, I know that Windows supposedly cannot boot from an external drive, but I have read reports of people booting it off of USB drives, and wonder if a similar tact can be tried for Firewire for greater I/O speed. I also know that OS X can be booted from Firewire, so it seems it should be possibly for Windows.
My guess as to how to do this would be to. . .
- use dd to do a bit-by-bit copy of the Windows partition on my internal drive to a partition on the external drive
- modify the boot.ini on the external so that it points to the correct location
- modify a .cfg file to load Firewire drivers earlier in the boot process (?)
The first step is trivial, and the second will be easy since the Firewire drive will appear in the same place unless I have another external or CD attached. What I'm not sure how to go about doing is the third - which .cfg? I can probably figure out the drivers otherwise.
Finally: has anyone else done something like this? If so, links/hints? Thanks.

i recommend looking into rEFIt:
I've looked at rEFIt before (because I really didn't want to go through all that hacking), but I think the problem still exists: Windows XP does not support EFI (and neither will Vista), so there's still the problem of USB/Firewire drivers loading at boot time. From
http://forums.macrumors.com/archive/index.php/t-224050.html
some people got rEFIt on the external drive, and that helped to dual boot on that drive, but it still required hacking the Windows CD (it's the registry, that I think goes into the installation itself, that's hacked). It's a Window's problem.
you should be able to do this using esata external
drives with a esata express card for native speeds.
If the expresscard includes drivers that support booting, it may work (hence the mention of the Nitro AV card). I know that not all cards do, and I haven't heard anyone had success with it. But, it would be cool if someone decides to get such cards and try ; )

Booting from an external drive when the internal has died

Hello, I have an older iMac mid 2007 2.4 GHz Intel model. Around 2009 my internal hard drive failed and for the last few years I had a nice work around using an external drive to boot into OSX. I was curious however if anyone knew of an official or well documented method of using this method because for what ever reason the drive is not being recognized. My method is a combination of trial and error until it booted properly but recently it has just stopped recognizing the disc or when installing the OS it will just fail near the end of the install. Tried to hold Option with the disc installed on boot to see if I could boot from CD but it never seems to show up as an option.
I thought that the drive was damaged but I was able to reformat and use it for a few months with my PC so I have confidence it is not that.
The other problem I was curious about is the format of the drive and how I can even go about reformatting to the mac journal. I cant seem to get into disk utility all I get is a white screen.
Any help is greatly appreciated.
Original Information
OS: 10.4.x
Ram: 2g ddr2
I have been able to many time before reinstall using my leopard and snow leopard disks.

Okay just clarifying my INTERNAL hard drive is most likely dead, I am looking to install and boot from my external hard drive. According to this AHT article
Before you begin
Important: If your Mac was released after June 2013, you will use Apple Diagnostics rather than Apple Hardware Test (AHT). See Using Apple Diagnostics for instructions.
Consider doing some preliminary troubleshooting to determine if your issue is related to hardware. You can try to determine if the cause of your issue is related to hardware or software by following Isolating issues in Mac OS X. AHT can help determine which hardware component may be causing the issue.
Before starting AHT, be sure to disconnect all external devices except the keyboard, mouse, display, and Ethernet adapter. Also disconnect any external optical drives.
My goal is to find a way to boot from my external drive.
"Won't matter, as long as you have the Disc.
To make it botable, you will need to set the Partition Map Scheme (GUID Partition Table) and Format it (Mac OS Extended Journaled) before installing OS X."
The disc or the drive? I assume you mean the drive but according to the document that should be removed.

I just updated my Iphone 3G and now it won´t work anymore. It wouldn´t even boot. It was just working for 3 sek. after the installation and now it shut itself down. Any help, please?

I just updated my Iphone 3G and now it won´t work anymore. It wouldn´t even boot. It was just working for 3 sek. after the installation and now it shut itself down. Any help, please? Thankyou

I suspect you have a 2G iPod. Those can only go to iOS 4.2.1.
Identifying iPod models
iPod touch (3rd generation)
iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.
You also said: "It also will not let me download any music onto it." What happens when you try to sync music to the iPod?

How Do I Always Boot From An External Drive

I successfully installed Mac OS X 10.4.8 on an external hard drive. It boots successfully into OS X, but only if you press option on boot and select the drive or if you boot from the drive inside my Mac Mini and go to startup disk and select the external. Is there any way to just always boot from the external drive without doing anything? Thanks in advance for all of your help.
Mac Mini PowerPC Mac OS X (10.4.8)

If booting from a cold start doesn't work but restarting after selecting the drive does work, then most likely the drive isn't ready when the Mac is doing the cold boot.
Try turning the drive on several seconds before turning on the Mac.

Will boot image on external drive work for powerbook g4

Similar Messages

Maybe you are looking for