Will bright light (camera flashlight) damage the screen?

I opened the flashlight application in my mobile phone which utilizes the in-built camera flash. It's pretty bright and I've used it to take a look at my MBPr's screen up close. I put the computer in sleep mode and flashed the light directly at certain areas on my screen.
I'm curious though. Will this damage my screen? I didn't notice any change afterwards (I used the flashlight for about 5 - 8 minutes).
Thanks in advance.

OGELTHORPE wrote:
No, but there should not be a reason to use that camera flash to take a picture of the display.
The OP was not taking a picture.
He simply used the camera flash as as a flashlight (hence the "Flashlight" term/app).

Similar Messages

  • I had to restart my iMac and when it came back on the screen shows a file folder with a question mark. What should I do?

    I had to restart my iMac and when it came back on the screen shows a file folder with a question mark. What should I do?

    Did you move any system files? It's looking for the system folder. You can startup from the system CD by inserting the CD and restarting the computer and at the same time hold down the C key. The computer will boot from the CD. At that point run the disk utility and check your hard-drive. It the problem persists then do a fresh clean install of the system folder and that should help you get back on track.
    Good Luck.

  • My mac wont turn on. It is charging and the on light is on when the computer is shut but once I open it the light turns off and the screen is black.  I turn it off and then on again and the start up noise goes but it is still black - Help!?

    My mac wont turn on. It is charging and the on light is on when the computer is shut but once I open it the light turns off and the screen is black.  I turn it off and then on again and the start up noise goes but it is still black - Help!?

    Claire, please post your machine specs as requested. There are some variants of the MBP with specific hardware issues. Example: the older "silver key" MBPs with 2.2Ghz and faster processors can have a defective video chipset that produces a black screen or distorted video. That problem is covered under an Apple program that will fix this at no cost to you if you computer is that model.
    Do "About this Mac" from your Apple menu and, in the resulting window, click the "More Info..." button. That launches System Profiler for you. The first screen looks like this:
    The second line, "Model Identifier" (or "Machine Model" if you are running OS10.4) precisely identifies your MBP variant. Post that, and include it in your equipment info in your profile for future posts. That means people don't have to ask, and you get faster help that is targeted to your specific model. Saves everybody a bunch of keystrokes and you get better advice.

  • Can I use a stylus on my iPad without damaging the screen?

    I downloaded app Penultimate and would like to use a stylus to make notes.  (I found an old one from my Palm phone.). Will this damage the screen?

    You can't use the ones from your old Palm device, but there are a variety of capacitive styla available for use with iPads (and other things with capacitive touch displays). Personally, I like the BoxWave, though it's a little on the short side -- the nib is great, though. The Acase ones aren't bad either. There's a company called CCM that makes some very inexpensive ones that are very similar to the BoxWave ones -- but they come in a 3 pack and you don't get nearly as upset with yourself when you lose one.

  • Ipad not responding, can't turn off or on, i just get a light blue haze on the screen?

    ipad not responding, can't turn off or on, i just get a light blue haze on the screen?
    is there a way to fix this without bringing it in?

    Try reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • I connected my friends ipod to my laptop whilst I was playing some songs and closed whatever came up on the screen from itunes. Next thing I know his ipod has been wiped and we can't find his music. How do we get his music back?

    I connected my friends ipod to my laptop whilst I was playing some songs and closed whatever came up on the screen from itunes. Next thing I know his ipod has been wiped and we can't find his music. How do we get his music back? He hasn't got his laptop anymore so the only music he has was on his ipod.

    Hasn't he got a backup of his content on external drives and/or CDs or DVDs ?

  • After my Macbook has been on for a little, the light goes out on the screen. When I start to close the screen the light comes back on. I can hold it in this position and keep typing/reading indefinitely.any idea what is the problem?

    After my Macbook has  been in  use  for a little while, the light goes off on the screen as if the computer is off.  Then, as I start to close the screen, it comes back on fully.  If I push it back open it cuts off again.  So, I just leave it part way open and turn the laptop at an angle so that I can continue to see the screen & type.  It acts like there is a short.  Any idea what the problem is?

    It does sound like you might have a faulty video connection. See if you can make a Genius Bar appointment at your local Apple Store.

  • Just got my I Phone back from my mom. Its Been 2 weeks and i try to turn the phone back on and nothing came up on the screen. i plugged in the charger and nothing shows up ?! helpppppppppppppppppppppppppppppppppp

    Just got my I Phone back from my mom. Its Been 2 weeks and i try to turn the phone back on and nothing came up on the screen. i plugged in the charger and nothing shows up ?! helpppppppppppppppppppppppppppppppppp

    Plug the iPhone into a wall outlet, let it charge for half an hour and then try a reboot by holding both the power and home buttons until the apple logo appears.
    If that does not work, take it to an Apple store genius bar to be tested by the technicians.

  • HT1600 I have Apple TV version 7.4.2 and we pressed on the remote the select button and the menu button at the same time to update our software.  The box shows white light, we can get the screen to select netflix but nothing will move and the box will not

    I have Apple TV version 7.4.2.  We read in a blog that in order to reset our Apple TV we should press the menu button and the select big button at the same time which we did.  Now when we attempt to turn on the apple tv box it with the remote we get a white light and sometimes we can get the menu screen but the remote will not let us move now will it allow us to turn the apple tv on or off.  If we just leave it alone, the white light eventually goes away.  I did unplug the apple tv and we removed the batteries and reinstalled them from the remote and that did not make any difference.  Please advise. 

    If your problem persists get yourself a micro USB cable (sold separately), you can restore your Apple TV from iTunes:
    Remove ALL cables from Apple TV. (if you don't you will not see Apple TV in the iTunes Source list)
    Connect the micro USB cable to the Apple TV and to your computer.
    Reconnect the power cable (only for Apple TV 3)
    Open iTunes.
    Select your Apple TV in the Devices list, and then click Restore.

  • Does some of you see little squares on his ipad3 screen, when bright light shines directly on the display?! Is this normal?

    Hey folks,
    I just got my iPad 3, and when the display is almost white like on the google homepage i noticed there were small squares or a grid visible all over the screen (when a light is shinning directly on the screen). I just want to know if it is just on my device or some of you also have experienced the same. If you cannot see the grid just tilt the ipad a bit when you are on a white background (as it is most visible on a white background). In addition I recognized that my ipad has a much "warmer" colour setting than my colleague's one. His one is "whiter" or "colder".
    For any ideas, experiences, suggestion: thanks in advances!

    Look like the plastic molding process is not perfect in your top shell surface, or some component might attach to that area that make the layer that block the light from lcd is not covering those area.
    I don't have my MacBook with me so I cannot give you any idea or comparison, hope somebody will post either they have same issue or they inform you that they dont have any of that.
    Just discuss this with you apple store or apple dealer if you feel this is annoyed, bring your picture along with your MacBook and even better print this thread so they now you are serious and not faking it.
    Actually it is kinda cool when you drew up small layout of the spot, it makes your MacBook one of a kind. If you post this thread on 6/6/06, it might give me goose bump, just kidding.

  • Dimming past OS X minimum - will it damage the screen?

    I've noticed a lot of people asking the question "Is it possible to dim an iMac's display past the OS X minimum?" The answer to that question is Yes - you can use a freeware app called Shades for example.
    My question is - could this potentially damage the display? I've read that providing the LCD backlight with too little power can damage it.

    Hi sandeepg
    Shades does not lower the backlight, it works by obscuring your screen with an overlay.
    http://www.versiontracker.com/dyn/moreinfo/macosx/31515
    Dennis

  • Can not adjust brightness and minimize and maximize the screen with Fn keys

    I have bought a HP 15-D006TU laptop 1 week back. f2 and f3 for adjusting brightness and f4 to minimize and maximize the screen are not working. I am also trying to install the Hotkey driver which is mostly suggested here. but the version available is not supported. Can anyone help me out in this case?

    Hi NIdisha,
    Thank you for your post, I will do my best to assist you.
    I understand that you are experiencing an issue with the brightness and the  fn keys. When I looked up the specifications, I see it came with FreeDos. I am providing you  links, to the software and driver page for your computer,HP 15-d006tu Notebook PC Drivers  and Frequently Asked Questions About FreeDOS (FAQs).  Please note the compatible keyboard driver. I would suggest you uninstall and reinstall the drivers for the keyboard. I am also providing you a document on Notebook Keyboard Troubleshooting (Windows 8), that may assist you.  If you would like furhter assistance, please let me know if you are still running  FreeDos, or have changed the operating system.
     I hope this has helped.
    Sparkles1
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom right to say “Thanks” for helping!

  • My Macbook display changes color when I open applications. It looks like there is a light blue layer over the screen, thus changing the color of my display. This layer goes away when i quit the applications.

    I am facing a problem and I am not sure if its a graphic card malfunction. When I open applications like Chrome, VLC player, and most apps, my display suddenly changes color. It is as though the Theme was changed. The normal grey panel on opened windows turns to light blue and everything else seem as though there is a light blue layer on top of it. When I close these applications (quit) the display returns to its normal self.
    My MacBook Pro is 2 years old, and I have an extended warranty. Will Apple replace my graphic card if it is actuall the graphic card's problem?

    I had that problem, too, and it's been documented both here and on the Adobe forums. What happens is that when you have dynamic switching on, when an application that uses your discrete GPU kicks in, the screen will change color. My problem lasted for a couple of weeks then just vanished.
    What you need to do is download Cody Krieger's gfxCardStatus and turn off dynamic switching and leave your GPU set to discrete only. That's the only fix that I know of at this time. I don't know why it happens or why mine stopped.
    Good luck,
    Clinton

  • I downloaded/installed a software that came up on the screen and left it until the next morning.  When I went to used the IPad, I have not been able to restart it.  What should I do?

    I downloaded/installed a software that came up on the IPad screen and left itrunning  until the next morning.  When I went to used the IPad next day, I have not been able to restart it.  What should I do?
    thanks,
    hari

    If you mean that it won't boot up, then assuming that the battery isn't empty (it can take about 15 minutes of charging before it will respond), then have you tried a soft-reset to see if that gets it to boot up ? Press and hold both the sleep and home buttons for about 10 to 15 seconds, after which the Apple logo will hopefully appear - you won't lose any content, it's the iPad equivalent of a reboot.

  • Will long recording video time damage the iPhone lens, chip, hardware?

    I noticed there are some car video recording apps available now for users to record video, audio, and GPS data into a video clip.  The idea is like the video camera hardware but it's now doing so in your iPhone. 
    Will long time video & audio & GPS recording damage your iPhone chips and hardware?  Say if I drive 1 hour to and from work everyday, do you think the extensive usage will damage the iPhone?

    Will long time video & audio & GPS recording damage your iPhone chips and hardware?  Say if I drive 1 hour to and from work everyday, do you think the extensive usage will damage the iPhone?
    IMO. no.

Maybe you are looking for

  • Sale order recosting

    Hi, We face a problem while recosting the sale order line item. We can do this either in transaction CK51N or in VA02 (Extras - Costing). Though we do recosting in VA02, system takes us to CK51N screen. Now the issue is, when we do the recosting and

  • URLConnection not working in some browsers

    Hi, I have tested several examples of URLConnection to connect to a webpage from a Java applet, but it only works when Java SDK is intalled, it does not run in clients which have only the Virtual Machine or equivalent. Could you please provide me wit

  • Data in FM  A to FM B

    Hi all, i have  the following requirement: 1) There are two function modules - A , B 2) Need to write a select query and fetch the data into internal table in FM A, 3) The fetched data in FM A should be available in FM B. <b>The problem is i should n

  • HttpServletResponse's Header printing

    Hi, I wrote a servlet to download mail attachment file with imap. And, I noticed S1AS7 send header part as UTF-8. It's not good for Japanese environment, because unfamous IE can't handle filename with any charset except SJIS raw bytes. So, I want to

  • Saving A Track with the Chain of Plugins

    How do is save a track from one project that has the eq, compressions, and effects that on want, and open it in another project? I want to unify drum and guitar sounds. Thanks in advance! Sean