Will BT return to my area to install Fiber now tha...
Three years ago BT Infinity was being rolled out in my area, it was pretty extensive overall and lots of houses were connected, cabinets changed etc. Unfortunately for me this was at the same time as a road resurfacing for the main road connecting my part of the estate with the main Fiber roll out area, this meant that the road has a Section 58 applied to it, meaning it cannon be dug up for three years, this ruling runs out at the end of this month (Sept 2013).
Given that BT could in effect now return to the area and perform the works, is it possible that they would do so or will we just be brushed off and left without a fiber connection?
Our exchange has been setup on the new services for ages (MYCAS) and serves our area (Leeds Castleford) for the postcode I'm located at (WF10 2AS) and the surround areas.
The road with the Section 58 is Park Lane, Allerton Bywater, our street is Park Avenue. Both roads that connect on each end of Park Lane have fiber, these are Barnsdale Road and Leeds Road, so too does the nearest parallel road Station Road.
Any information people can provide on who we could contact would be greatly appreciated, thank you.
It is possible your area could be re-visited. Only Openreach will be able to tell you.
[email protected]
Similar Messages
-
I have synced my ipod many times, but for some reason it will no longer sync the apps, and says there are apps installed that can not be determined. What should I do?
See these previous discussions:
not determined
iTunes cannot sync... apps not determined installed on...: Apple Support Communities
installed apps could not be determined...: Apple Support Communities -
After years of no problems I sddenly can't print photos. When I select print I get the message "There are no themes located. Until at least one theme has been installed this feature will be unavailable. What are themes? How do I install them? Why has this problem suddenly arisen?
Re-installing does not affect your Library in any way. You don't delete it, only the app.
To re-install iPhoto
1. Put the iPhoto.app in the trash (Drag it from your Applications Folder to the trash)
2a: On 10.5: Go to HD/Library/Receipts and remove any pkg file there with iPhoto in the name.
2b: On 10.6: Those receipts may be found as follows: In the Finder use the Go menu and select Go To Folder. In the resulting window type
/var/db/receipts/
2c: on 10.7 they're at
/private/var/db/receipts
A Finder Window will open at that location and you can remove the iPhoto pkg files.
3. Re-install.
If you purchased an iLife Disk, then iPhoto is on it.
If iPhoto was installed on your Mac when you go it then it’s on the System Restore disks that came with your Mac. Insert the first one and opt to ‘Install Bundled Applications Only.
If you purchased it on the App Store or have a Recent Mac you can find it in your Purchases List.
Regards
TD -
Macbook will not boot after 10.5.2 install
After installing the 10.5.2 update via software update (from 10.5.1) my macbook will no longer boot. I get the Apple logo for about 5 seconds then I get the 'You need to restart your computer' message. I can't get past this point. Any suggestions on how to get my laptop back to life would be appreciated.
Start by:
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger and Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now shutdown the computer for a couple of minutes and then restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior (4.1 for Leopard) and/or TechTool Pro (4.6.1 for Leopard) to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Then download the standalone updater and reinstall 10.5.2. If that doesn't solve your problem then you will have to do an Archive and Install.
How to Perform an Archive and Install
1. Do not proceed with an Archive and Install if DU reports errors it cannot fix. In that case use Disk Warrior and/or TechTool Pro to repair the hard drive. If neither can repair the drive, then you will have to erase the drive and reinstall from scratch.
2. Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When you reach the screen to select a destination drive click once on the destination drive then click on the Option button. Select the Archive and Install option. You have an option to preserve users and network preferences. Only select this option if you are sure you have no corrupted files in your user accounts. Otherwise leave this option unchecked. Click on the OK button and continue with the OS X Installation.
3. Upon completion of the Archive and Install you will have a Previous System Folder in the root directory. You should retain the PSF until you are sure you do not need to manually transfer any items from the PSF to your newly installed system.
4. After moving any items you want to keep from the PSF you should delete it. You can back it up if you prefer, but you must delete it from the hard drive.
5. You can now download a Combo Updater directly from Apple's download site to update your new system to the desired version as well as install any security or other updates. You can also do this using Software Update. -
How can I return back to OSx after installing Lion?
I'm disappointed. After installing Lion, everything is slower. The best thing I had last year was my new MacBook Pro, because everything was fast.. (sleep, opening programs, multitasking...etc) Now, everything takes forever. How can I return back to OSx?
Downgrade Lion to Snow Leopard
1. Boot from your Snow Leopard Installer Disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu.
2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Note the SMART status of the drive in DU's status area. If it does not say "Verified" then the drive is failing or has failed and will need replacing. SMART info will not be reported on external drives. Otherwise, click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Set the format type to Mac OS Extended (Journaled.) Click on the Options button, set the partition scheme to GUID then click on the OK button. Click on the Partition button and wait until the process has completed.
4. Quit DU and return to the installer. Install Snow Leopard.
This will erase the whole drive so be sure to backup your files if you don't have a backup already. If you have performed a TM backup using Lion be aware that you cannot restore from that backup in Snow Leopard. I suggest you make a separate backup using Carbon Copy Cloner 3.4.1. -
MacBook will not sleep automatically since Snow Leopard install
Hello. I am having a serious issue with my MacBook since upgrading to Mac OS X Snow Leopard. My MacBook (Late 2008 Aluminum, 2.4 GHz) will not go to sleep automatically anymore. If I select "Sleep" from the Apple menu it will sleep fine. However, it will not sleep according to my Energy Saver preference pane which says sleep at 1 min each (Display and Computer). Another thing to keep in mind is that my display sleeps perfectly normally. However, the computer itself will not sleep.
Here are the things that I have tried so far:
- Reinstall 10.6.2 combo updater
- Remove Energy Saver preferences and entire System Configuration folder
- Made sure that no hardware or software is interrupting sleep
- Reset PRAM and SMC
I am running Mac OS X 10.6.2 with ALL updates and firmware installed.
Please help me figure this out as it is a serious issue. Thanks.
Message was edited by: celticpride678
Message was edited by: celticpride67812/30/09 6:05:55 PM UserEventAgent[115] ** ERROR: SCNetworkSignatureCopyActiveIdentifiers returned nil
12/30/09 6:09:31 PM Camino[151] * WARNING: Method selectRow:byExtendingSelection: in class NSTableView is deprecated. It will be removed in a future release and should no longer be used.
12/30/09 6:09:43 PM Camino[151] -deltaZ is deprecated for NSEventTypeMagnify. Please use -magnification.
12/30/09 6:21:21 PM Camino[461] * WARNING: Method selectRow:byExtendingSelection: in class ExtendedTableView is deprecated. It will be removed in a future release and should no longer be used.
12/30/09 6:23:38 PM Finder[103] Error loading /Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: dlopen(/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types, 262): no suitable image found. Did find:
/Library/ScriptingAdditions/Adobe Unit Types.osax/Contents/MacOS/Adobe Unit Types: no matching architecture in universal wrapper
12/30/09 6:23:38 PM com.apple.Finder[103] Finder: OpenScripting.framework - scripting addition "/Library/ScriptingAdditions/Adobe Unit Types.osax" declares no loadable handlers.
12/30/09 6:23:41 PM System Preferences[548] .scriptSuite warning for result type of command 'timedLoad' in suite 'SystemPreferences': the type NSNumber ('long') doesn't match the result Apple event code ('doub').
12/30/09 6:23:43 PM System Preferences[548] ILLogger ILMediaBrowserPathWatcher: ** Error in ILMediaBrowserPathWatcher startFSEventStream failed to start for paths: (
"/Users/Brian/Pictures/iPhoto Library"
12/30/09 6:23:43 PM System Preferences[548] ILLogger ILMediaBrowserPathWatcher: ** Error in ILMediaBrowserPathWatcher startFSEventStream failed to start for paths: (
"/Users/Brian/Pictures/iPhoto Library",
"/Users/Brian/Library/Preferences"
12/30/09 6:24:06 PM System Preferences[548] It looks like we crashed last time. Reverting to default screen saver.
12/30/09 6:24:17 PM com.apple.diskmanagementd[557] /: no supported helper partitions to update.
12/30/09 6:24:28 PM [0x0-0x24024].com.apple.systempreferences[548] System Preferences(548,0x11a70b000) malloc: * auto malloc[548]: error: GC operation on unregistered thread. Thread registered implicitly. Break on autozone_thread_registrationerror() to debug.
12/30/09 6:24:45 PM [0x0-0x24024].com.apple.systempreferences[548] System Preferences(548,0x7fff7001abe0) malloc: reference count underflow for 0x2009f1300, break on autorefcount_underflowerror to debug.
12/30/09 6:25:24 PM System Preferences[548] * -[NSCFArray objectAtIndex:]: index (5) beyond bounds (5)
12/30/09 6:26:32 PM System Preferences[548] * -[NSCFArray removeObjectAtIndex:]: index (5) beyond bounds (5)
12/30/09 6:28:03 PM System Preferences[548] * -[NSCFArray removeObjectAtIndex:]: index (4) beyond bounds (4)
12/30/09 6:28:03 PM System Preferences[548] * -[NSCFArray removeObjectAtIndex:]: index (4) beyond bounds (4)
12/30/09 6:28:04 PM System Preferences[548] * -[NSCFArray removeObjectAtIndex:]: index (4) beyond bounds (4)
12/30/09 6:28:04 PM System Preferences[548] * -[NSCFArray removeObjectAtIndex:]: index (4) beyond bounds (4)
12/30/09 6:28:32 PM [0x0-0x24024].com.apple.systempreferences[548] System Preferences(548,0x7fff7001abe0) malloc: reference count underflow for 0x200b9bc40, break on autorefcount_underflowerror to debug.
12/30/09 6:28:32 PM [0x0-0x24024].com.apple.systempreferences[548] System Preferences(548,0x7fff7001abe0) malloc: reference count underflow for 0x200b9bbe0, break on autorefcount_underflowerror to debug.
12/30/09 6:28:32 PM [0x0-0x24024].com.apple.systempreferences[548] System Preferences(548,0x7fff7001abe0) malloc: reference count underflow for 0x200b9bb00, break on autorefcount_underflowerror to debug.
12/30/09 6:28:32 PM [0x0-0x24024].com.apple.systempreferences[548] System Preferences(548,0x7fff7001abe0) malloc: reference count underflow for 0x200b9bba0, break on autorefcount_underflowerror to debug.
12/30/09 6:28:32 PM [0x0-0x24024].com.apple.systempreferences[548] System Preferences(548,0x7fff7001abe0) malloc: reference count underflow for 0x200b9bb80, break on autorefcount_underflowerror to debug.
12/30/09 6:29:51 PM com.apple.launchd.peruser.502[97] ([0x0-0x28028].com.apple.speech.feedbackservicesserver[575]) Exited: Killed
12/30/09 6:29:51 PM com.apple.launchd.peruser.502[97] ([0x0-0xb00b].com.apple.speech.synthesis.SpeechSynthesisServer[127]) Exited: Killed
12/30/09 6:30:11 PM com.apple.launchd[1] * launchd[1] has started up. *
12/30/09 6:30:38 PM com.apple.SystemStarter[21] Starting HP Trap Monitor
12/30/09 6:30:41 PM com.apple.launchctl.Aqua[97] launchctl: Dubious permissions on file (skipping): /Users/Brian/Library/LaunchAgents
12/30/09 6:30:41 PM com.apple.launchd.peruser.502[95] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
12/30/09 6:30:41 PM com.apple.launchctl.Aqua[97] launchctl: Dubious permissions on file (skipping): /Users/Brian/Library/LaunchAgents
12/30/09 6:30:44 PM com.apple.launchd.peruser.502[95] (com.apple.Kerberos.renew.plist[116]) Exited with exit code: 1
12/30/09 6:31:12 PM com.apple.WindowServer[62] Wed Dec 30 18:31:12 Brian-Roths-MacBook.local WindowServer[62] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
12/30/09 7:17:14 PM SyncServer[211] [110f20] |SyncServer|Warning| Refreshing watchdog because of a calendar time change alert.
12/30/09 7:17:14 PM UserEventAgent[112] ** ERROR: SCNetworkSignatureCopyActiveIdentifiers returned nil
12/30/09 8:04:33 PM UserEventAgent[112] ** ERROR: SCNetworkSignatureCopyActiveIdentifiers returned nil
12/30/09 8:18:10 PM com.apple.launchd.peruser.502[95] ([0x0-0x9009].com.Growl.GrowlHelperApp[123]) Exited: Terminated
12/30/09 8:22:34 PM Installer[1364] PackageKit: * Missing bundle identifier: /Library/Receipts/NeoOffice-3.0.1-Intel.pkg
12/30/09 8:22:34 PM Installer[1364] PackageKit: * Missing bundle identifier: /Library/Receipts/NeoOffice-3.0.1-Patch-1-Intel.pkg
12/30/09 8:22:34 PM Installer[1364] PackageKit: * Missing bundle identifier: /Library/Receipts/NeoOffice-3.0.1-Patch-2-Intel.pkg
12/30/09 8:27:06 PM com.apple.launchd.peruser.502[95] ([0x0-0xa00a].com.apple.speech.synthesis.SpeechSynthesisServer[124]) Exited: Killed
12/30/09 8:27:06 PM com.apple.launchd.peruser.502[95] (0x1001014d0.mach_init.rcd[436]) Exited: Killed
12/30/09 8:27:43 PM com.apple.launchd[1] * launchd[1] has started up. *
12/30/09 8:35:53 PM com.apple.launchd.peruser.502[97] ([0x0-0x10010].com.apple.DiskUtility[142]) Exited: Killed
12/30/09 8:35:53 PM com.apple.launchd.peruser.502[97] ([0x0-0xa00a].com.apple.speech.synthesis.SpeechSynthesisServer[127]) Exited: Killed
12/30/09 8:36:12 PM com.apple.launchd[1] * launchd[1] has started up. *
12/30/09 8:36:47 PM com.apple.SystemStarter[21] Starting HP Trap Monitor
12/30/09 8:36:49 PM com.apple.launchctl.Aqua[99] launchctl: Dubious permissions on file (skipping): /Users/Brian/Library/LaunchAgents
12/30/09 8:36:49 PM com.apple.launchd.peruser.502[97] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
12/30/09 8:36:49 PM com.apple.launchctl.Aqua[99] launchctl: Dubious permissions on file (skipping): /Users/Brian/Library/LaunchAgents
12/30/09 8:36:51 PM com.apple.launchd.peruser.502[97] (com.apple.Kerberos.renew.plist[117]) Exited with exit code: 1
12/30/09 8:38:04 PM com.apple.launchd.peruser.502[97] ([0x0-0xa00a].com.apple.speech.synthesis.SpeechSynthesisServer[123]) Exited: Killed
12/30/09 8:38:42 PM com.apple.launchd[1] * launchd[1] has started up. *
12/30/09 8:39:17 PM com.apple.SystemStarter[21] Starting HP Trap Monitor
12/30/09 8:39:19 PM com.apple.launchctl.Aqua[99] launchctl: Dubious permissions on file (skipping): /Users/Brian/Library/LaunchAgents
12/30/09 8:39:19 PM com.apple.launchd.peruser.502[97] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
12/30/09 8:39:19 PM com.apple.launchctl.Aqua[99] launchctl: Dubious permissions on file (skipping): /Users/Brian/Library/LaunchAgents
12/30/09 8:39:20 PM com.apple.launchd.peruser.502[97] (com.apple.Kerberos.renew.plist[118]) Exited with exit code: 1
12/30/09 8:39:25 PM com.apple.WindowServer[65] Wed Dec 30 20:39:25 Brian-Roths-MacBook.local WindowServer[65] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
12/30/09 8:39:40 PM com.apple.launchd.peruser.502[97] ([0x0-0xa00a].com.apple.speech.synthesis.SpeechSynthesisServer[126]) Exited: Killed
12/30/09 8:42:44 PM com.apple.launchd[1] * launchd[1] has started up. *
12/30/09 8:43:16 PM com.apple.SystemStarter[21] Starting HP Trap Monitor
12/30/09 8:43:18 PM com.apple.launchctl.Aqua[99] launchctl: Dubious permissions on file (skipping): /Users/Brian/Library/LaunchAgents
12/30/09 8:43:18 PM com.apple.launchd.peruser.502[97] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
12/30/09 8:43:18 PM com.apple.launchctl.Aqua[99] launchctl: Dubious permissions on file (skipping): /Users/Brian/Library/LaunchAgents
12/30/09 8:43:20 PM com.apple.launchd.peruser.502[97] (com.apple.Kerberos.renew.plist[118]) Exited with exit code: 1
12/30/09 9:03:31 PM com.apple.WindowServer[66] Wed Dec 30 21:03:31 Brian-Roths-MacBook.local WindowServer[66] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
12/30/09 10:42:25 PM com.apple.loginwindow[29] Wed Dec 30 22:42:25 Brian-Roths-MacBook.local loginwindow[29] <Warning>: CGSShutdownServerConnections: Detaching application from window server
12/30/09 10:42:26 PM com.apple.loginwindow[29] Wed Dec 30 22:42:26 Brian-Roths-MacBook.local loginwindow[29] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
12/30/09 10:42:26 PM com.apple.loginwindow[29] Wed Dec 30 22:42:26 Brian-Roths-MacBook.local loginwindow[29] <Warning>: CGSDisplayServerShutdown: Detaching display subsystem from window server
12/30/09 10:42:27 PM com.apple.WindowServer[600] Wed Dec 30 22:42:27 Brian-Roths-MacBook.local WindowServer[600] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
12/30/09 10:42:32 PM com.apple.loginwindow[599] 2009-12-30 22:42:32.557 migCacheCleanup[617:903] Flushing Cache Locations...
12/30/09 10:43:09 PM com.apple.coreservicesd[64] ThrottleProcessIO: throttling disk i/o
12/30/09 10:47:12 PM com.apple.loginwindow[599] Wed Dec 30 22:47:12 Brian-Roths-MacBook.local loginwindow[599] <Warning>: CGSShutdownServerConnections: Detaching application from window server
12/30/09 10:47:12 PM com.apple.loginwindow[599] Wed Dec 30 22:47:12 Brian-Roths-MacBook.local loginwindow[599] <Warning>: CGSDisplayServerShutdown: Detaching display subsystem from window server
12/30/09 10:47:13 PM com.apple.loginwindow[599] Wed Dec 30 22:47:13 Brian-Roths-MacBook.local loginwindow[599] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
12/30/09 10:47:13 PM com.apple.WindowServer[698] Wed Dec 30 22:47:13 Brian-Roths-MacBook.local WindowServer[698] <Error>: kCGErrorFailure: Set a breakpoint @ CGErrorBreakpoint() to catch errors as they are logged.
12/30/09 10:47:20 PM com.apple.launchctl.Aqua[711] launchctl: Dubious permissions on file (skipping): /Users/Brian/Library/LaunchAgents
12/30/09 10:47:20 PM com.apple.launchd.peruser.502[97] (com.apple.ReportCrash) Falling back to default Mach exception handler. Could not find: com.apple.ReportCrash.Self
12/30/09 10:47:20 PM com.apple.launchctl.Aqua[711] launchctl: Dubious permissions on file (skipping): /Users/Brian/Library/LaunchAgents
12/30/09 10:47:22 PM com.apple.launchd.peruser.502[97] (com.apple.Kerberos.renew.plist[729]) Exited with exit code: 1
12/30/09 10:47:44 PM com.apple.launchd[1] (0x100102d30.mach_init.mdworker[684]) Exited: Killed
12/30/09 10:47:44 PM com.apple.launchd[1] (com.apple.launchd.peruser.503[593]) Exited: Killed
12/30/09 10:48:41 PM com.apple.launchd[1] (0x100102d30.mach_init.mdworker[783]) getpwuid("503") failed
12/30/09 10:48:41 PM com.apple.launchd[1] (0x100102d30.mach_init.mdworker[783]) Exited with exit code: 1
12/30/09 10:48:41 PM com.apple.launchd[1] (0x100102d30.mach_init.mdworker) Failed to check-in!
12/30/09 10:58:17 PM UserEventAgent[112] ** ERROR: SCNetworkSignatureCopyActiveIdentifiers returned nil
12/30/09 11:18:13 PM [0x0-0x22022].com.apple.systemevents[365] com.apple.FolderActions.enabled: Already loaded
12/30/09 11:19:23 PM UserEventAgent[112] ** ERROR: SCNetworkSignatureCopyActiveIdentifiers returned nil -
Pages 4.3 (332MB) and Pages 5.0 (455MB) are both installed on my macbook, can I delete Pages 4.3 from my application folder?
I recently (after upgrading to Mavericks) installed Pages 5.0 (iWorks ’09 with Pages 4.3 was already installed on my Macbook). When I try to open a pages document, I sometimes get the message 'you need a newer version of Pages to open this document.' When I ctrl-click the pages document and select the program Pages 5.0, the document opens in Pages '05. Other Pages documents open in Pages 4.3. How do I select Pages 5.0 as default program to open my documents? And how do I do that, since pages preferences do not give that possibility? And can I delete pages 4.3 after making pages '05 the default. Or is there another way to solve this?
kind regards, SadrachUsing Get Info to change all documents to open with Pages 4.3 doesn't work. It will work on individual files, but that could be a lot of files to reset.
This is what works for me. After I installed the new iWork updates I created a folder on an external drive & named it "other applications." I then moved the new iWork apps to this folder & renamed the applications Keynote 6, Pages 5 & Numbers 3. I have icons for two versions of Pages & Numbers (I rarely use Keynote) in my Dock. Even with two versions of Pages & Numbers running, double-clicking an existing file opens in Pages 4.3 or Numbers 2.3. This should also keep the Mac App Store from nagging you to update. Others have renamed the '09 iWork apps & set them as default. -
I Removed itunes from my pc, and tried to redownload/install it, now i can't even get it installed, it says " The feature you are trying to use is on a network resource that is unavailable" What do i do to get itunes back on my pc?
This kind of problem can often be fixed with the microsoft Installer cleanup utility.
Unfortunately the Microsoft Installer Cleanup utility has been withdrawn by Microsoft because of compatibility issues with Microsoft Office so you will need to find a copy elsewhere – the installer is msicuu2.exe. You need version 3.
Google msicuu2.exe download
mydigitallife in the above search has a copy of version 3
Check for malware before installing it.
After installing, To run the program – All Programs>>Windows Install
If you get permission denied error, Try Run as Administrator – an option if you right click on the program.
When you run the cleanup utility, look for any instance that you find of iTunes and remove it.
It is possible that you will have to remove other apple programs if removing iTunes doesn't allow you to install iTunes. Post back with any furtyher error messages if there is a problem. -
I tried to update my Itunes to the news version and now it will not open it says it was installed incorrectly I need to know what to do so I don't lose all my music
try with this one
uninstall all the apple application S/w like Quicktime, Bonjour,
apple Device Support, Apple Auto update, Itunes etc from your pc,
Reboot it
Now download a fresh itunes from apple and try installing
Reboot it
If you are having Problem in uninstalling any of the apple application
try 'revo uninstaller' and uninstall all the apple applications
mentioned above -
When Adding Report to Dashboard will not return
Version: 10.1.3.4.0
When I run a report from answers all is fine, I can view "all pages" no with no issues. When I take the same report and add it to a dashboard, then run the report and view the first page 25 records results are fine. If I try to view "all pages" with the icon at the bottom of the page the report will not return and will stay in a state of "Transferring data from <BI Server Name>"i explorer process just grow in memory size and utilizes about 1GB in memory, but nothing returns.
When I run the report from answers I get all the records returned in about 10 minutes time. The number of records returned is 28,000. There are 50 columns in the report.
When I run the query from an SQL tool the response time is less than 20 seconds.
Thanks
Edited by: sweetsophia on Apr 11, 2011 6:12 AM
Edited by: sweetsophia on Apr 11, 2011 6:17 AM
Edited by: sweetsophia on Apr 11, 2011 6:17 AMHi sophia,
I suppose the BI server hangs due to lot of records coming up when tried to see with the last page button .We need to handle how many records should be displayed in answers itself.But all is well with your answers screen.Can you look at it by going page by page so is it fetching or not?
Check what is the SQL generated by BI server when you click last page button
hope helps you.
Cheers,
KK -
Hi,
I am running BPA on My Exchange 2010 VM (Server 2008 R2 VM on Hyper-V) and get the following errors:
The 'Services' string type value located in 'HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\v14\Setup\Services' registry key is missing or inaccessible. The Microsoft Exchange Information Store service won't start. As a result, all services that depend
on this service won't be able to start
Exchange server [Exchange Server FQDN] is a virtual machine but the additional tools are not installed. This configuration is not supported. Install Virtual Machine Additions for this guest.
Problem is that, for the first, that Key exists and the service is actually running fine. And for the second my VM tools are already installed.
Hopefully someone out there has had the same issue and can assist.
PeteHi Pete,
For the first error message, please try the following steps:
Make sure the Information Store service is in Starting status,
Automatic startup type and works well, as a test we can try to
restart the Infroamtion Store service and verify the service works well.
Start
Registry Editor, find the registry key “Services” under “HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\ExchangeServer\v14\Setup”, its value is “C:\Program
files\Microsoft\Exchange Server\v14”(default install location), please check your registry, make sure the key “Services” exist and value is the Exchange Server install location and the
location is accessible;
Start
Registry Editor, and locate the following registry key:
HKEY_LOCAL_MACHINE\Software\Microsoft\Exchange\Setup
Use the
Permission option under the Security tab to check the permission setting on this key. Make sure
System is in the list with Full Control permissions if the service account is Local System. If you are not using Local System as the service account, check the existence of the corresponding account in the list and ensure that
it has Full Control permissions. Please refer to this article:
Title: Exchange Store Does Not Start: Errors 7024, 1026, 9542, and 5000
Link:
http://support.microsoft.com/kb/285116
Start
ADSI Edit, and then browse to the following location:
Domain.com/Configuration/Services/Microsoft Exchange/Org/Administrative Groups/AdminGroup/Servers/Server Name
Right-click the
server name, and then click Properties.
Click the
Security tab, make sure this own server’s server object have
full control permission on its own server.
If not or the object is missing, please modify the permission or click
Add, locate the computer account for the Exchange Server computer, add it to the Permissions list with full control.
Click OK, and then close ADSI Edit.
Use
Active Directory Users and Computers to add the current affected
Exchange Server computer account to the Exchange Servers(previous version should be “Exchange Domain Servers”) group in the
Microsoft Exchange Security Groups( or Users) OU. Refer to this article:
http://support.microsoft.com/kb/297295.
Restart the Exchange Server computer, then rerun the ExBPA.
For the second error message, Microsoft don’t recommend to install Exchange Server on virtual machine without additional tools, so the error message occurs. We can just ignore
this message, it will not affect the Exchange servers.
Regards, Eric Zou -
Why are my fonts are not installing in ox6 it shows as exec?
Why are my fonts are not installing in ox6 it shows as exec?
Are you referring to an icon that looks like a monitor and has the word exec in green on it? If so, that's OS X's way of saying "I have no idea what this file is".
I'm guessing you're trying to use an incompete Type 1 PostScript font. Type 1 PostScript fonts are a set. One file is a suitcase containing all of the low res bitmap screen fonts. The rest are the outline printer fonts. As an example, here's Adobe Garamond.
Adobe Garamond
AGarBol
AGarBolIta
AGarIta
AGarReg
AGarSem
AGarSemIta
The first file which I highlighted in green is the font suitcase of bitmap screen fonts. The rest are the outline printer fonts.
1) The files for a Type 1 PostScript font must have both the screen and printer fonts for a given set in order to work. They also must be in the same folder.
2) The suitcase of bitmap fonts will work alone, but output will be terrible since the system will print the fonts using the 72 dpi screen fonts in the suitcase if the outline portions are missing.
3) Having only the outline fonts will not work. You can see the fonts, but they will not load. That's not a problem with Font Book, Suitcase or other font manager. None of them, nor the system itself will load outline fonts from a Type 1 PostScript font without the matching suitcase of screen fonts present. -
Some devices are not installed
Hello:
I think that I already installed all the drivers in my W520 but it still showing that some devices are not installed
In "Other devices" I have the folowing four entries:
- Base system device
- Biometric Coprocessor
- F5521gw
- PCI Serial Port
Could someone help me to identify which drivers I still need ??
Thanks for the help.
Regards.
Solved!
Go to Solution.Hi Turco:
Download the "System Update" application from this link, install it, and run it.
This Lenovo application will then fetch the four missing items you list and install them automatically. It will also check to make sure all the other drivers are up to date.
The 'biometric coprocessor' is probably the fingerprint reader. The 'F5521w' is the cell phone modem. I don't know what the other two items are.
If you need a list of all the drivers available for your machine, you can get it (and the drivers themselves) from this link, which is the Device Driver File Matrix (DDFM) for the W520.
But, honestly, it is a heck of a lot simpler, easier, and faster to just download "System Update" and let it do all the work for you. In fact, you might even have that application on your computer already - just click on the Windows 7 orb (the coloured ball with the flag on it) and type "System Update" into the search box, if it is installed, you will see it appear in the results list. If it appears, click on it and run it.
Michael
W520 (4270 CTO), which replaced a W500 (4062-27U), which replaced a T42P, which replaced an A21P... -
Apple Care will not return my Hard drive.
I have a Power Book G4 1.67 . The hard drive has failed, it is covered under applecare for another 6 months, I have case number, the person on the phone was very nice, they sent the shipping box.
I think it's more then just the HD, however. The drive was partitioned in 3 sectors. Of course the system sector was the one that failed. I can boot in Target Disk Mode and see the other 2 sectors of the drive. The system sector is the one that is bad, I can't get that info off there. I am sure someone else can who is better qualified can. I really need that info, I can see they system partition in Disk Warrior, but am not a guru in that or the couple of other products I bought to see if I could rescue this info.
I asked AC Rep if I could have the Hard Drive back, they said no, I asked if they would back up the information, they said no, I said I would pay for either back up or pay for the old hard drive myself, (again) they said no.
So now I am stuck, if I replace that HD myself, I may void the warranty, I know it's a customer installable part. I have replaced many over my apple years, upgrading HDs about every 2 years in multiple computers and putting the old ones in external cases. I have also upgraded RAM, airport cards, pram batteries so I am comfortable working the simple upgrades. So I could simply replace that Hard Drive and then send it in, but then they may blame me for the problem.
There also smaller problems, screen latch won't stay closed, superdrive will not eject correctly, screen has some lines in it occasionally. It's not a road warrior, but I use it a lot and always treat these well. The drive was making no noise at all and no indication of a impeding failure. I treat my machines very carefully, I still have a Pismo that is gasping it's last breath.
This HD has all my important passwords and other personal info, I was in the middle of backing it up when thing went blitz. I saved the data from the other 2 partitions but I need that HD. Why will they not return my old part ? Or even back it up for a fee. I am afraid to replace the HD with a new one, and then send it off, or even try to reboot it from a new one as I maybe be stuck with it and they say well I did the damage.
Yes I know multiple back ups, but this is the first HD failure in 20 years and I should have had 2 HDs for back ups instead of one. Any other part I could see their point, but that HD has information I need and I don't want someone having it either. Is there a fair solution here.
This thing has been down a week, I just got the box and I need to do something. There is no Apple store up here and the company that can do the repairs, messed up a iBook G4, so the only option is sending it out to apple care.
Ideas and Suggestions?
GeoffWell Holy Smoke !! Apple has agreed to let me get my data back a bit of a round about way but we will see.
I am going to use a hard drive recovery service so it will go like this.
A" local service provider," whom did not do anything at all to fix an iBook I gave them, under Apple Care to repair, but keep it 3 weeks and then said, I could not find anything by Goggling the problem...I see the problem that cursor is all over the place and jumps anywhere it wants., a problem came up and by the time we got back the iBook was out of warranty . Sometimes the local help is tough, but I try to support them.
I think, with me standing there, they can remove the hard drive from my powerbook, it's pretty easy..
Then, with Apple Care's blessing, I can send the drive into a recovery company, yes expensive, then return the drive in parts if that is the way it comes back, with my powerbook, ship it and AppleCare will fix it the PowerBook.
That is really good, and if all goes well, I will be very impressed and not hesitate to get that new
MBP. They even offered to let me take out the drive, but I thought, better to keep it in the "Apple Family."
Now they did not send a letter or email to this effect, that would have made me feel better, but the attitude at Apple, has really changed, these people went multiple times to supervisors to get this answer and solution. Not the quickest way to get it fixed, but
I am willing to bend, if they are willing to alter what is a well oiled line and will create a bump in their flow..
We will see, I told them they just might get a bag of parts and I will not reinstall the bad drive, as it is most definitely shot. No problem, it's all in the notes the CSR said.
We will see, but for today, this is sure a different attitude then the last go around, a few years ago. The CSR people are nice, understand English, as they seem to be based in Canada, which is a whole lot better then anywhere else I would want to talk too, or have talked to. They can understand abstract ideas, unlike those who just read from a card and stick to what the card says.
I am holding my breath, but I hope to report that this all goes smooth. I liked it when Apple was a good company. People went out of their way to help you no matter it took to get it fixed or working. I think a company can be good, profitable, plus have a excellent CSR and repair program.
For today at least, here is to Apple, way to go.
Geoff -
Does MAS show updates if apps are not installed ?
I got several apps from the Mac App Store but deleted some of them. In fact I deleted all traces of these apps even .bom and .plist files in "receipts".
Now updates of not installed apps are not shown in the App Store application. Is this due to the fact that these apps are not installed OR because I deleted the .bom and .plist files in "receipts" ?
Thx.steps to find these "invisible" resources:
1) In Finder type Command F (Find)
2) In menu bar select "Kind"
3) Scroll down to "Other"
4) Wait a moment (menu has to rebuild itself)
5) Scroll down and select: "System Files"
6) In Finder type Command F (Find)
7) In menu bar select "System Files" and "Are included"
8) Type: "receipts"
voila ,with search results you will get the complete path which should be like: yourharddisk/private/var/db/receipts
Maybe you are looking for
-
Why do columns not appear in the same order as the fields on my imported form?
Hello All I am an Acrobat X user and make numerous forms through Acrobat. However, when I import the file into FormsCentral, the order of the fields in the table do not correspond to the order in which they appear on my form. The fields on my form
-
[SOLVED] Can't change keyboard Layout on Xorg 1.8
Hi all I'm trying to configure the Input Hot-plugging on Xorg 1.8 but the keyboard layout is still on US keyboard and I need to change it. I use some of the configurations of some people of the forum but it still on US, now my 10-evdev-conf file is l
-
Difficulty in printing iViews from a page
I have a Webdynpro project. Here in one page n number of iViews is present. I want the data from one of this iViews to get printed. Either on this iViews should I create a link so that data of this iViews get populated to .pdf or .doc file or some ot
-
Adobe Encore CS6 cannot run in non-royalty serialized mode. The application needs to be serialized with a royalty bearing serial number.
-
Hi I am using ODI 10g and I start the agent as scheduler but when I created an scenario and I tried to insert a scheduling to this scenario I can not see the agent that I start and can test since Topology to the contrary another name of an agent that