Will canon Pro 9000 scanner for 35mm conversion work on lion?

I want to purchase a Canon 9000 scanner to convert 35mm slides. I know it works with snow leopard, but will it also work with Lion if I upgrade?

I'm afraid no one can tell you definitively, but from what I've heard, Canon should work as well with Lion as it does with Snow Leopard.

Similar Messages

Printing to a Canon pro 9000 mark ii from creative cloud products

I am using Windows 8 and trying to print to a Canon pro 9000 Mk ii printer from Photoshop, Illustrator and InDesign. I am a register creative cloud user and have the latest drivers for the printer. I am using official inks and Canon papers. I just cannot get colours to print properly, the colours are too dark with a blue cast I recently changed to this printer from an old Epson 1290 that had good colour reproduction (for its age and that it was just a two cartridge system). At first I thought it was a problem with the printer, but after printing with several other programs I soon realised that this is an adobe problem exclusively!
Has anyone got a clue to what I am doing wrong or if there is a way of getting the adobe products to play nicely with the printer?
Thank you in advance,
Jeremy

Wildpaintings for color management issues you may want to consider posting your inquiry in the forum specific to the software you are facing difficulties with. Most likely you will either need to disable printer color management in the Adobe applications, if you wish to use the Canon Pro's color management, or disable the Canon Pro's color management.
The specifics on how to do this though is going to vary by application. I would recommend posting your inquiries to the following forums:
Photoshop General Discussion - http://forums.adobe.com/community/photoshop
InDesign - http://forums.adobe.com/community/indesign
Illustrator - http://forums.adobe.com/community/illustrator

CANNOT PRINT FROM MACBOOK PRO TO CANON PRO 9000

Hi, this is my first post here. i expect this has been asked before, but here goes. Yesterday i tried to connect my MACbook pro to my CANON pro 9000.I have tried everything i can think of
without success.
I have downloaded print drives from CANON,still does not print.
i have uninstalled the printer and added it again,still does not print.In console log i just keep getting filter error, coming up.
I am completely at a loss now, i am also new to MAC'S i have only had it for two months, so still learning.
therefor, i don't know if i am doing something wrong,or if there is a fault somewhere.The printer itself works fine with a PC.
Any help with this would be much appreciated,
thank you.

Welcome to the Discussions!
Maybe this document will help:
_http://docs.info.apple.com/article.html?artnum=307156_
Joe

Resolved Color Correction issue with MAC OS X and Canon pro 9000

Problem: Unable to set the Color Correction option to NONE. I have looked all over the net and it seems that there are lots of people with this problem. After months and months of battling with this issue I have finally come up with the answer. Its all down to the fact that MAC OS X comes with a pre installed driver for the Canon Pixma Pro 9000. To cut a long story short this driver needs to be deleted from your system files before you update your driver, which you need to download from the canon website. I downloaded version 4.8.6. The new driver does not seem to work with the default driver still on the comp. After following directions below you should finally be able to get your Color Correction option on your driver working.
First things first... go to the following location and delete the canon pro 9000 driver.
Location: /Library/Printers/PPDs/Contents/Resources
File Name: CanonIJPro900series.ppd.gz
(make a backup of this file if you wish )
Once you have deleted the driver you need to restart your mac.
After rebooting install the new Canon Pro 9000 driver. I suggest installing version 4.8.6(this one worked for me)
Reboot Mac again just for good measure then do a test print and you should now be able to set COLOR CORRECTION to NONE.
I know there are a lot of people out there having the same problem so if you are reading this please pass the solution on to others.

Hi Japamac,
Indeed a new cable just bought solved this problem.
Still wandering why my MacbookPro was able to print and my PowerMac not, maybe another driver issue?
Thank's anyway for your reply.

Printing proofs w/ Canon Pro 9000 MarkII

I'm relatively new to InDesign, having done mostly web design up until recently. I've designed a brochure and want to print out a proof using a Canon Pro 9000 MarkII printer to get an accurate view of the colors. Sadly, I can't figure out how to turn off color management on the printer and have searched for the better part of a day to figure this out. Does anyone have any ideas of how to do this or how to effectively allow InDesign to perform all the color management. Thank you!

Take a look at http://forums.adobe.com/message/3843338#3843338 and see if you can convince toyboy to either tell you privately waht he knows, or go ahead and make it public. It's not like anyone really knows who he is.

When printing from aperture my margins are unequal, even if i set my margins they come out bigger one side and not the other. i am using a macbook pro running osx lion and printing with a canon pro 9000

when printing from aperture my margins are unequal, even if i set my margins they come out bigger one side and not the other. i am using a macbook pro running osx lion and printing with a canon pro 9000.
please can anbody help or advise?

You didn't mention any color calibration being done on your monitor. This is an essential part of any color-correct workflow. What are you using to calibrate your monitor (and your printer)?
Print profiles (for soft-proofing as well as printing) are for specific combinations of paper & printer. The nine you have are each, most likely, for a common paper (perhaps mfr'd by Canon) to be used with your printer.
I don't know what you mean when you say "I choose a high standard print option".
Have you read the User Manual chapter on printing?
Printing Your Images
There is also a good appendix on calibration:
Calibrating Your Aperture System

Print quality on OS X 10.6 + Illustrator CS5 + Canon Pro 9000 MKII

Hi!
Printing from Illustrator on iMac on our Canon Pro 9000 MKII produces ugly low resolution jagged edges on curved shapes. Same file printed on the same printer from Illustrator on Windows results in (almost) perfectly smooth edges. I understand that this has something to do with the fact that Pro 9000 II not beeing a Postscript printer. Are there any solutions to this problem, so I can print smooth curves direct from Illustrator on Mac? I don't want to have to go through any extra steps every time I print, like saving to PDF.
Thanks!

Hi!
Printing from Illustrator on iMac on our Canon Pro 9000 MKII produces ugly low resolution jagged edges on curved shapes. Same file printed on the same printer from Illustrator on Windows results in (almost) perfectly smooth edges. I understand that this has something to do with the fact that Pro 9000 II not beeing a Postscript printer. Are there any solutions to this problem, so I can print smooth curves direct from Illustrator on Mac? I don't want to have to go through any extra steps every time I print, like saving to PDF.
Thanks!

Canon pro 9000 mark 11 front paper feed problem

When I set the front load tray for 19 x 13 paper : my steps are turn printer on set front tray for front feed, wait for green top light to stop flashing and then push smaller green light, when it starts flashing I can put the large paper in. This works fine until I go to my computer and tell it to print. Status menus state printer preparing for printing but all this is happening the Orange light starts flashing 10 flashes and a status with an error message front tray in is wrong and needs to be put back in place which is step one and then tap orange flashing light to resume printing again. Now I have the large paper all ready loaded so I can not reset front tray but have to remove paper and cancel print from printer menu as the orange light just continues. I have reinstalled driver rebooted computer added added Print Studio Pro and this happens pring from Adobe Photoshop Elements 11 and Lightroom 3.5. I have made sure Lightroom and Photoshop Elements is up to date. Using the rear tray for smaller sizes works fine.

Hi Vesta!
Welcome to the Canon Forums and thanks for your post!
To have a better understanding of your issue, please let everyone know what operating system (Windows Vista/7/8 or Mac OS 10.X) you are using. That way, the community will be able to assist you with suggestions appropriate for your product.
Any other details you'd like to give will only help the Community better understand your issue!
If this is a time-sensitive matter, our US-based technical support team is standing by, ready to help 24/7 via Email at http://bit.ly/EmailCanon or by phone at 1-800-OK-CANON (1-800-652-2666) weekdays between 10 AM and 10 PM ET (7 AM to 7 PM PT).
Thanks!

IMAC + PS CS + CANON PRO 9000 = redish print

I run into situations like that before with different versions of PS on windows machines. What happened to me twice is that the printer performed color corrections and it was not always easy to disable that. I looked around everywhere in the printer menue and didn't see anything.
-My monitor is calibrated
-My B&W prints are perfect (so I assume it has to do with some color correction)
-latest driver for the PRO 9000 installed
-I use the correct profile
-Original canon paper plus ink
Help is greatly appreciated!

Have been able to contact Canon? Their usually fairly prompt in replying via support email. Let us know how you make out. I am considering purchasing a pixma pro 9000 and I am running Mountain Lion as well.
Thanks,
Larry

How long will quicktime pro movie record for?

how long will quicktime pro movie record? i would like to record a 10+min onscreen movie clip. would like to find out before I purchase it. thanks. owen
Message was edited by: ODog

how long will quicktime pro movie record?
That depends. How much free space do you have available on a single drive? Which compression format do you plan to use? How fast is your CPU. Barring the unexpected, QT 7 Pro will record until it runs out of scratch space. Frame rates are dependent on your CPU power which means newer, more powerful platforms record more frames per second and thus tend to have higher data rates up to the max standard for the system. Lastly, the compression format/device type/device capture size/graphic complexity combination also determines the average data rate. So, as long as the average data rate times the duration of the clip is less than the amount of free space available on your hard drive, you can record continuously.
i would like to record a 10+min onscreen movie clip.
If by "oncscreen" movie you are referring to a "screen capture" of a movie, the QT 7 Pro will not do this. You either need to use a third-party screen capture application or upgrade to Snow Leopard for QT X "screen capture" capabilities.

Canon Pro 9000 good printer but garbage with Mac

I have a canon 9000 pro printer, the interface for this printer with mac is just garbage. No nice gui, I have to connect to http://127.0.0.1:631/. Is there a way of setting the printer settings from the file/print options from the applications ?
It is looking like I will have to keep a windows machine for printing photos etc where I want to easily change the printer settings. Is there a way around this??
If not what is a good A3 photo printer similar in resolution and quality to the canon that actually allows the user to use the printers full fucntionality from connected to a mac??

Welcome to Apple Support Communities!
The iMac PPC can't run 10.6.8. So either you don't have 10.6.8, or you don't have an iMac PPC. PowerPC is the nomenclature for all CPUs used on iMacs from 1998 through 2005. First identify your operating system, then you can properly identify what driver you need to use. My FAQ* here on printers may be of use*:
http://www.macmaps.com/printersx.html
Go to Apple menu (the blue Apple logo in the upper left) and click on About This Mac to determine what operating system you are running, and under More Info what iMac CPU you are using. No need to repost. Once you've properly identified your machine and operating system, I can ask a moderator to move your thread.

Recommended 4000dpi Scanner for 35mm Slides...?

Can someone with experience of this topic recommend a scanner suitable for bulk scanning at 4000dpi of a collection of c. 7000 colour slides. I have looked at the Nikon Coolscan 5000 with the slide autofeeder, quite like the look of that one.
Anything else recommended? What's the best Mac friendly software to use?
Also, before the inevitable recommendation... , I want to do this myself rather than use a bureau service.

With due respect why do you feel you need 4000dpi? One slide done at 4000dpi will probably take about a day to scan and create a about a 2GB file! Unless you are going to be blowing up this slides to bill board size advertisements 4000dpi is WAY overkill.

Canon Pro 9000

I just recieved my pro9000 printer. There seems to be missing functions in the software when using leopard. I cant get anything to print correctly from my mac pro I m using lightroom and cs3

Did you click on the Arrow next to the printer name in the Print... dialog?

Pages docs won't print on my Canon Pro 9000

When I try to print a document, all I get is a blank page. I copied the doc to Word, and it printed perfectly.
Has anybody else encountered this problem, and if so, how did you deal with it?

It seems to be related to your printer, maybe it doesn't have a Postscript emulator. Test print a pdf to it.
Have you updated your printer drivers, Apple regularly has new downloads in its software support pages, and also been to Canon's website to see if there are any reported issues?
Peter

Workaround for scanner for HP 3055 running OSX Lion 10.7?

Do you have a workaround for the HP Laserjet 3055/3050 all-in-one scanning ability for Mac OSX Lion 10.7?
I am hitting the wall trying to find out how to enable the scanner to work?
This question was solved.
View Solution.

You may try the following workaround, although i cannot guarantee it will work and may not be stable as expected:
Enter System Preferences > Print & Scan, select the 3050 printer ant then click the Minus sign to remove it.
Download the Mac OS 10.5 installation below by clicking the download button:
http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=18...
Make sure to skip the Setup Assistant and follow the steps till the installation completes.
Perform the following steps in order to provide the Setup Assistant the right permissions to complete on Lion:
1. From the Utilities folder, open the Terminal
2. Type “sudo “ (with space) in the Terminal.
3. Locate the HP Setup Assistant in folder Applications/HP LaserJet Software
4. Right-click (Or CTRL + Letf click from the Apple keyoard) the HP Setup Assistant and choose “Show Package Contents”.
5. Open the “Contents” folder and then the “MacOS” folder. It should contain the Unix Executable File of HP Setup Assistant.
6. Drag the HP Setup Assistant (Unix Executable File) into the Terminal and press enter. Terminal will ask for the password of the user.
7. After writing the password press Enter Button.
Now follow the Setup Assistant Steps to complete.
Good luck,
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

Will canon Pro 9000 scanner for 35mm conversion work on lion?

Similar Messages

Maybe you are looking for