Will Compressor 4 work with my Final Cut Pro 7 in Final Cut Studio?

I decide to use Final Cut Pro 7 instead of Final Cut Pro X to use the Apple Color. But I wonder if the Final Cut Pro 7 can render video or work with Compressor 4 instead of the Compressor 3. Any ideas of what to do?
Thank you for the answer.
Steve

This recently came up in another thread. on FCP6.
I'd say pretty much the same applies to FCP7  as FCP 6 – except that the features for C3.5 are even more comparable to C4 than are C3.0. No interoperability between the new Compressor and the legacy versions of FCP, but many of us have always just exported QT movies fron FCP and used those as source fies. That can obviously still be done "working with" C4.
Is it worth the $49 for those who own FCS3? IMO, it's doubtful unless you do a lot of Web hosting work.
Good luck.
Russ

Similar Messages

  • Will Compressor 4 work with Final Cut Pro Express?

    I am not thrilled with encoding with iMovie. Any suggestions? Will Compressor 4 work with Final Cut Express
    Thanks
    Larry

    Check out this link and see if that answers your questions. http://forums.macrumors.com/showthread.php?t=1234910

  • Will Dell 2005FPW work with my Radeon 9000 Pro?

    I have a ATI Radeon 9000 Pro with 64 MB VRAM in my Quicksilver and I am looking to purchase a Dell 2005FPW. Will my old 9000 Pro drive it? Will it look okay? Or do I need to upgrade my card?
    Thanks!

    Hi,
    Welcome to the Apple Forums!
    Yes.... it has one ADC and one DVI connector. As long as the Dell is DVI, no problem. If it's VGA, get an adapter for the DVI on the card.
    Regards,
    Dave

  • Will this RAM work with a Mac Book Pro?

    http://www.eworldsale.com/crucial-2gb-kit-match-pair-pc2-5300-667mhz-cl5-240-pin -ddr2-dimm566415062.html
    I found that RAM, which seems like it's correct, except that further on down the page it says something about it being "SDRAM." The picture doesn't look like SDRAM, so I'm not sure. Anyone know anything about this particular RAM? Thank you.

    It does NOT say ECC or Mac Pro.
    It also needs to say "Fully Buffered" DIMMs (FB-DIMM).
    use the crucial memory selector or www.macsales.com "TechWorks"

  • Does compressor 4 work with final cut pro 7?

    does compressor 4 work with final cut pro 7?

    Russ H wrote:
    WHile I'm not 100% certain (this has come up before and It's not convenient to test), I believe that purchasing Compressor will also allow you add additional codecs to your QT library.
    Russ
    Yes, Compressor adds several codecs, which can also be used in FCE (decoding and encoding using QuickTime Conversion) and in QuickTime player. Most notably these are MPEG-2 and ProRes. The latter is an editing-friendly Intraframe-Codec useful for preprocessing stuff for importing clips to FCE, particularly if it has a different framerate from the FCE project.
    I'm also still using FCE 3.5(*) and the "Export using Compressor" menu option remains grayed out, which is a pity, but the new codecs can still be used. I mostly use it to make stuff for DVDs, using my ancient and cumbersome iDVD.
    (*) It really works on Lion, provided you have installed it on a previous Mac OS release and then migrated or upgraded to Lion: the installer is a PowerPC program, but the installed program is Universal and works fine and very stable. If you already have Lion, and no older (Snow) Leopard machine, it's going to be more of a challenge, since the Lion kernel no longer supports PowerPC binaries, so Rosetta won't work.
    Bernd

  • Will the new final cut pro x work with my Final cut pro version 6.0.6 data

    will the new final cut pro x work with my Final cut pro version 6.0.6 data

    Thanks Tom.
    So I will need  upgrade to FCP 7 first, then convert to an XML file in 6.0.6, then convert to another file that FCP X can read? I have a lot of half done projects that need finishing. Is this process very complex and time consuming?
    Maybe I should be approaching this from a different angle. The reason I am asking is that I now need to upgrade to a new Mac book pro and have been told that I cant run final cut pro 6.0.6 on the new models using maverick. Is this true?
    Roger

  • How well does Compressor 4 work with Final Cut 6?

    How well does Compressor 4 work with Final Cut 6?

    The short answer is that there is no interoperability between them. Of course, you can certainly export a QT movie from FCP and bring it into C4.
    Honestly, I'm not sure it's worth it for someone already has C3. There is very little that C4 can do that C3 cannot. The major differences are that C4 has certain presets like  MPEG 4 h.264 and 1080 Apple TV; it can also create simple Blu Rays and DVDs. Qmaster is integrated, but I'm not sure whether that is a gain.
    Russ

  • I have a ibook G4 which has become redundant as my phone will no longer work with the version of itunes installed (latest it can use), how can I back up my phone to transfer to a new computer (a PC now)?

    My iphone 4s (7.1.1) will no longer work with my ibook G4 which is running 10.5.8. I have a PC which i'm now going to have to use, I've manually transferred my music and photos, but how do I go about transferring my contacts and calenders. What does itunes on PC sync to in terms of contacts and calenders?
    Thanks!

    Hi there BDempster,
    You may find the information in the articles below helpful.
    iOS: How to transfer or sync content to your computer
    http://support.apple.com/kb/HT1296
    iTunes 11 for Windows: Sync contacts, calendars, and other info with iPod, iPhone, or iPad
    http://support.apple.com/kb/PH12317
    You can use iTunes to sync the contacts, calendars, notes, Safari bookmarks, and email account information on your computer with your iPod, iPhone, or iPad. iTunes also syncs this information from your device to your computer—for example, if you add contacts on your iPad, syncing adds those contacts to Windows address book or Outlook Express on your computer.
    -Griff W. 

  • Will itunes 11 work with windows xp, I have ended up with this neqw version and it doesn't work , I can look at my library ,but not play and since synching my ipod it is now empty. Apple support is useless, they treat me like I'm on a Mac not a PC .

    will itunes 11 work with windows xp , I have ended up with this new version after accepting an update and now although I can view my library I can't play anything and since synching my ipod it is empty. Apple support can't seem to get it's head around the fact I'm on a PC keeps asking for an apple serial number, Help!!!

    Morning gedeye,
    Thanks for using Apple Support Communities.
    System Requirements
    Windows XP Service Pack 2 or later
    32-bit editions of Windows Vista or
    32-bit editions of Windows 7, and Windows 8
    For more information on this, take a look at this article:
    http://support.apple.com/kb/DL1614
    Best of luck,
    Mario

  • Will Ipod Touch work with Windows 8

    Will IPod Touch work with Windows 8?  Why is that not even a listed option in the help feature?

    Apple has just not got around to revising the documentation to reflect Win 8. Just use instructions for Win 7

  • I like the idea of auto back-up for my new iMac, Ipad and PC Netbook, particularly if I can access all files and data stored on any device.  But I have a Conceptronic router.  Will Time Capsule work with this and how?

    I like the idea of auto back-up for my new iMac, Ipad and PC Netbook, particularly if I can access all files and data stored on any device.  But I have a Conceptronic router.
    1. Will Time Capsule work with this and how?
    2. Can my printer USB be plugged in and then shared between the devices?
    3. Can I create a network and how?
    4.  What happend when a visitor logs onto my existing wireless router?
    I'm new to Macs (well a returning user having started with Mac Plus!!) and not very technical.  Any help / advice will be much appreciated.
    Ray

    The key to what you seem to want to do is to be able to get Apple's Time Capsule router to "join" the network that your Conceptronic router.  I believe that works with some third-party routers, but I've never seen a list of those that work in such a configuration and I have no experience with Conceptronic equipment.
    You might be better off with a Network-Attached Storage (NAS) device instead of a Time Capsule.

  • Can I connect my iPad mini to a data projector using a lightning to 30-pin adapter connected to a 30-pin to VGA connector? Or will this only work with a lightning to VGA connector.

    Can I connect my iPad mini to a data projector using a lightning to 30-pin adapter connected to a 30-pin to VGA connector? Or will this only work with a lightning to VGA connector?

    The lightning to 30 pin adapter does not support video as per the item description in the Apple online store:
    http://store.apple.com/us/product/MD823ZM/A/lightning-to-30-pin-adapter
    This adapter lets you connect devices with a Lightning connector to many of your 30-pin accessories.* Supports analog audio output, USB audio, as well as syncing and charging. Video output not supported.
    You will need to the Lightning to VGA adapter directly
    http://store.apple.com/us/product/MD825ZM/A/lightning-to-vga-adapter?fnode=3a
    Or the Lightning Digital AV Adapter
    http://store.apple.com/us/product/MD826ZM/A/lightning-digital-av-adapter
    If the projector supports HDMI input.

  • Will apple tv work with a hdmi splitter of some kind ? TV only has 2 hdmi ports and both are in use

    will apple tv work with a hdmi splitter of some kind ? TV only has 2 hdmi ports and both are being used .
    If splitter will work any recomendations as to best type to use

    The Hatter,
    I am a novice at Mac so I read all I can.  From what I understand the NEC monitors I bought require Display Port for their maximum performance.  The GTX 680 only has DVI outputs.  Difference from what I understand is larger bandwidth with the DP.
    You said I have the 4000 for CUDA.  I am not all that familiar with CUDA and when I do read about it I do not understand it. 
    A concern I have is, that if I connect the 2 high end NEC monitors via the 5770, using it's 2 Display Ports I would have nothing connected to the 4000.  Is the 4000 doing anything with nothing connected?  I read where in a PC system the 2 cards would interact but in a Mac system they do not.
    Bottom line, as I see it, the 4000 will not be useful at all to me, since I want a dual monitor set-up.
    So far the 5870 seems the best choice, higher band width than the 5770, and it has 2 Display Ports to optimize the NEC monitors.
    I'm not sure how fine I am splitting hairs, nor do I know how important those hairs are.  I am just trying to set up a really fast reliable system that will mainly be used for CS6 and LR4.  Those NEC monitors are supposed to be top notch.

  • Will my LED 27 Cinema Display work with the new Mac Pro?

    Will my LED 27 Cinema Display work with the new Mac Pro?

    Mini DisplayPort (like 27" LED Cinema Display) is a direct subset of ThunderBolt (like Mac pro late 2013). It plugs right in and the display portion "just works", no adapters required.

  • Will the 20" work with a Mac Mini?

    I've heard that the apple cinema monitors only work on PowerMac G4's and G5's. Is a Mac Mini a powermac g4. or will the monitor work with a mac mini?
    mike

    Yes, all the latest Cinema displays work with the mini except for the 30".

Maybe you are looking for