Will configuration lost if i use Recovery CD to fix file system in CUCM9.1.2?

Hi All,
I have new installation for BE6K, some services are not working after i run password recovery to reset securtiy password, i tried to do DRS backup and BAT, but both fail. if i use recovery iso to fix problem, will all configuration lost? any advoice is appriciated.
please see attached picture.

[+5] to Tony.
You can use Recovery Disk.Nothing is going to be lost.
I doubt this could be a bug
pwrecovery tool does not update the internal user passwords
CSCug92142
Description
Symptom:
Changing the security password using pwreset results in database replication going down.
file tail /cm/log/informix/ccm.log logs similar lines
09:05:12 Password Validation for user [dblpm] failed!
09:05:12 Check for password aging/account lock-out.
09:05:12 listener-thread: err = -952: oserr = 0: errstr = dblpm@CCM[CCM]: User (dblpm@CCM[CCM])'s password is not correct for the database server.
Conditions:
Fresh install of CM 9.1.1 or 9.1.1a
Change the security password using the pwrecovery method
Workaround:
Contact TAC for workaround
regds,
aman

Similar Messages

How do I identify the latest file modifications, application install, and registry key modification for Security Forensics.... using GP Audit for registry/file system

Hello,
Title pretty much states it all. I initially set out (as part of a Security Forensics initiative) to identify the most recently installed applications, modified files, and registry key changes using PowerShell. I attempted to pull this information and sort
them by date installed/last modified, but it was brought to my attention this information isn't always present and can be modified - so it's not accurate.
At that time it was suggested we use Group Policy auditing for Registry and File System - but I'm not sure how I'm going to use/pull these in PowerShell? This will be used on remote host all over the world so local physical access isn't an option.
My question is:
Once Group Policy Auditing for Registry and File System has been enabled, how would I go about pulling those audit logs for review once a system has been identified as compromised? I'm brand new to this GP Auditing (we have a separate team for that) so feel
free to take it from the beginning. :)
Thanks in advance!

Hi,
Here are a few suggestions for you:
Ensure Remote Registry service is started on local and remote machines.
Add the – Credential option and supply administrative credentials within the command.
More information for you:
Get-Eventlog doesn't work against Vista/W7 clients
https://social.technet.microsoft.com/Forums/en-US/c5185a01-b0d2-49a7-9aa7-52e6534ada04/geteventlog-doesnt-work-against-vistaw7-clients?forum=winserverpowershell
PowerShell - How to Get XML EventData - Remote Eventlogs - Exchange Events
https://social.technet.microsoft.com/Forums/scriptcenter/en-US/382b10c9-d740-46b1-b81c-b24de911eb14/powershell-how-to-get-xml-eventdata-remote-eventlogs-exchange-events-?forum=ITCG
Powershell script to gather failed logon attempts by event id and type from the security events log
https://social.technet.microsoft.com/Forums/scriptcenter/es-ES/00a62492-c63a-4c8b-92f9-1cc857223a00/powershell-script-to-gather-failed-logon-attempts-by-event-id-and-type-from-the-security-events-log?forum=ITCG
Best Regards,
Amy
Please remember to mark the replies as answers if they help and un-mark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]

Missing Recovery Partition and Unrecognized File Systems

So, a long time ago I accidentally deleted my recovery partition and have recently been trying to fix it so that I can upgrade my OS to Mavericks. After browsing around here I found the Recovery Partition Creator 3.7 and used it to create a new recovery partition. Using the diskutil list command everything seemed to be fine and it looked like the partition was successfully created so I tried reinstalling OS X Lion by holding command R at startup. Doing so brought up the internet recovery menu and I selected reinstall Lion which was still unsuccessful because "a recovery partition could not be created". So, I decided to check in disk utility to see what might be wrong and I used the disk utility debug command in order to access disk utility's debug menu and show all the hidden partitions. Now, looking at these partitions I see two hidden partitions: disk0s1 which is an EFI partition, and disk0s3 which is the Apple Boot Partition that was created by Recovery Partition Creator 3.7. After verifying the partitions, disk utility is telling me that both my EFI and apple boot partitions have unrecognized file systems, my Macintosh HD partition is fine. At this point I do not know what to do.
Below are photos of the diskutil list and of what disk utility is showing me for the two hidden partitions.
For reference I am running OSX Lion 10.7.5 (11G63) on a early 2011 13 inch Macbook Pro (Base Model).
Bootrom version: MBP81.0047.B27
SMC Version: 1.68f99
Thank you all in advance for your help, feel free to ask me any questions.

Just an update, I went ahead and installed Lion again over the existing TM restored installation using the Lion Update file and at least File Vault is working. Interestingly, I still do not have a Recover partition so obviously something new for Apple Support to learn.

Who else is using new 8.0 Siebel File System Partioning?

Hi All,
Wanted to see if anyone else has successfully implemented multiple file systems in Siebel 8.0?
The process now is different in that Siebel hashes your file name to determine which of the multiple file systems to use instead of search each sequentially like it used to. There is also a utility called sfspartition that you use to move your existing attachments to the correct file system.
There are a number of issues with srfpartition such as the documentation being inaccurate. I am wondering if anyone has successfully implemented and can share their experiences.
R
Robert Ponder
Lead Architect and Director
Ponder Pro Serve
cell: 770.490.2767
fax: 770.412.8259
email: [email protected]
web: www.ponderproserve.com

Hi All,
Wanted to see if anyone else has successfully implemented multiple file systems in Siebel 8.0?
The process now is different in that Siebel hashes your file name to determine which of the multiple file systems to use instead of search each sequentially like it used to. There is also a utility called sfspartition that you use to move your existing attachments to the correct file system.
There are a number of issues with srfpartition such as the documentation being inaccurate. I am wondering if anyone has successfully implemented and can share their experiences.
R
Robert Ponder
Lead Architect and Director
Ponder Pro Serve
cell: 770.490.2767
fax: 770.412.8259
email: [email protected]
web: www.ponderproserve.com

Using foreach loop container with file system task to rename and move files

the foreach loop container will not rename and move files for me
sukai

duplicate of
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/8f2899f1-43b0-47e0-8bd0-e082989cdcb8/file-system-task-and-foreach-loop-container?forum=sqlintegrationservices
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs

What was the last windows operating system to use FAT as its default file system?

I just wanted to test peoples knowledge of windows and its limitations. I thought this was the perfect place to do so.
I think it is windows me. Anyone have any other opinions?
Note: Question I was asking is in title.
Once you eliminate the impossible, whatever remains, no matter how improbable, must be the truth. - "Sherlock holmes" "speak softly and carry a big stick" - theodore roosevelt. Fear leads to anger, anger leads to hate, hate leads to suffering
- Yoda. Blog - http://www.computerprofessions.co.nr

 menu --> About this Mac:
What does "About this mac" say your processor is?

Drop tablespace and flashback : ORA-01245: offline file 7 will be lost if RESETLOGS is done

Hello,
    1 create tablespace TS1
    2 create restore point RP1;
    3 drop tablespace TS1 (datafile '/c:/ts1.dbf') including files
    4 restore database to RP1
    5 alter database open resetlogs failed with this error :
        ERROR at line 1:
ORA-01245: offline file 7 will be lost if RESETLOGS is done
ORA-01110: data file 7: '/c:/ts1.dbf'
   Can you help me please to fix this issue and to understand why it's occured.

Hi,
If you check the alert log you will get message similar to
Recovery deleting file #7:'<Oracle_Home>/db/dbs/UNNAMED00007' from controlfile.
Now you have 2 option
1. If you have backup of that tablespace TS1 then you can restore and recover it
If you don't need that tablespace then you offline drop that datafile 7 . Open the database in resetlogs mode and then drop tablespace TS1
Thank you

Oracle DB and File system backup configuration

Hi,
As I understand from the help documents and guides, brbackup, brarchive and brrestore are the tools which are used for backing up and restoring the oracle database and the file system. We have TSM (Trivoli Storage manager) in our infrastructure for managing the backup centrally. Before configuring the backup with TSM, I want to test the backup/restore configuration locally i.e. storing the backup to local file system and then restoring from there. Our backup strategy is to have full online backup on the weekends and incremental backup on the weekdays. Given this, following are the things, I want to test.
1. Full online backup (to local file system)
2. Incremental online backup (to local file system)
3. Restore (from local file system)
I found help documents to be very generic and couldn't get any specific information for the comprehensive configuration to achieve this. Can someone help with end to end configuration?
We are using SAP Portal 7.0 (NW2004s) with Oracle 10g database hosted on AIX server.
Helpful answers will be rewarded
Regards,
Chandra

Thanks for your feedback. I am almost clear about this issue now, except one point need to be confirmed: do you mean that on linux or unix, if required, we can set "direct to disk" from OS level, but for windows, it's default "direct to disk", we do not need to set it manually.
And I have a further question: If a database is stored on a SAN disk, say, a volume from disk array, the disk array could take snapshot for a disk on block level, we need to implement online backup of database. The steps are: alter tablespace begin backup, alter system suspend, take a snapshot of the volume which store all database files, including datafiles, redo logs, archived redo logs, controll file, service parameter file, network parameter files, password file. Do you think this backup is integrity or not. please note, we do not flush the fs cache before all these steps. Let's assume the SAN cache could be flushed automatically. Can I think it's integrity because the redo writes are synchronous.

CR 2010 Report using "File System Data" as source fails in production

Hello, I've recently upgraded my website from VS 2008 with full CR 2008 to VS 2010 using CR 2010 SP1 runtime (x32). Everything went fine except for one report that uses as a source the "file system data". It points to a share on a samba drive and it worked great before the upgrade. After upgrading my development box the report runs fine, but when I deployed it, it fails with the message:
Failed to load database information. Error in File {report name} {D5D84E7F-54DB-4BCA-B3C3-0A169CDC36D7}.rpt: Failed to load database information.
I made sure the websiteu2019s Application Pool identity was set to use credentials of a user who has access to the share.
The data source has the following properties:
Database DLL: crbd_filesystem.dll
File Mask: .
Include Empty Directories: False
Max Number of Subdirectory Levels: -1
Starting Directory:
{FreeBSD server name}\{share name}
This report uses a sub-report which has the same source. This report works fine from (full) CR 2008 and from the designer inside of VS 2010 works too. I can run it on my development box (in release and debug modes) which is Windows 7 (x64) using IIS 7.
In production, we donu2019t include the runtime in our application deployment, since we run multiple sites and do updates frequently, so we pre-install (one time) the runtime separately on the server. We installed the CR 2010 SP1 x32 runtime on our test and development boxes which both are Windows 2003 with IIS6 and made sure they are setup to use .Net 4 and have the Application Pool identity setup to have access to the share. All my other reports which use ODBC work fine. Just this one report doesnu2019t and Iu2019m at a loss on how to even begin troubleshooting this.
Is CR 2010 still capable of using u201Cfile system datau201D as a source? I couldnu2019t find anything on u201Cfile system datau201D with CR 2010. Though I have seen under Other Sources, it still exist when I created a new report, just to try it out.

Looks like you've found a bug with the CRVS2010 runtime. I looked for the crbd_filesystem.dll in the CRVS2010 install directory (C:\Program Files (x86)\SAP BusinessObjects\Crystal Reports for .NET Framework 4.0\Common\SAP BusinessObjects Enterprise XI 4.0\win32_x86) and it is there. I then opened up the 32 bit MSI and MSM with the MS Orca utility to see if the file is included and it is not.
Two things we can do:
1) Add the crdb_filesystem.dll to your install and make sure it installs to the above directory on the runtime computer
2) I will created a fix request for the issue, however next fix will be Service Pack 2 (ETA, sometime after October) and I doubt this will make it there. So we'd be looking at SP 3 - if there will be one (ETA would be in 2012).
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup
Got Enhancement ideas? Try the [SAP Idea Place|https://ideas.sap.com/community/products_and_solutions/crystalreports]

Build standby database using cold backup on a different file system & host

Hi gurus,
The database version is 11.2.0.3. OS is HP UX Itanium 11.31
I am building a standby database using cold backup of primary. The primary mount points are (/p003/oracle, /p004/oracle) on HOST1 and the standby file system on HOST2 are (/s003/oracle,/s004/oracle). I am not using Data Guard to apply logs as we have a script that mounts the log location periodically to standby server and apply the logs to make it current. I am using cold backup as the database is small like 200G and can be taken down. Could someone help me with the steps to build standby using cold backup for a different file location in standby ?? My concern is I can copy the data files from /p003 to /s003. How will I build the controlfile ?
If it was same File system on both HOST 1 and HOST2 I can copy the cold backup to the standby server, build a standby control file on primary and copy and replace the standby control file and everything was set.
Thanks
Cherrish Vaidiyan

Hello;
I have a note on this using a cold copy of the current files instead of a copy backup :
http://www.visi.com/~mseberg/data_guard_on_oracle_10_step_by_step.html
I will post SCP SQL in a moment.
Best Regards
mseberg
set heading off
set feedback off
set pagesize 100
set linesize 400
select 'scp '||a.name ||' server_name:' || a.name as newname from v$datafile a;
select 'scp '||a.name ||' server_name:' || a.name as newname from v$controlfile a;
select 'scp '||a.member ||' server_name:' || a.member as newname from v$logfile a;Edited by: mseberg on May 25, 2013 10:35 AM

Why would anyone want to use ASM Clustered File system?

DB Version: 11gR2
OS : Solaris, AIX, HP-UX
I've read about the new feature ACFS.
http://www.oracle-base.com/articles/11g/ACFS_11gR2.php
But why would anyone want to store database binaries in a separate Filesystem created by Oracle?

Hi Vitamind,
how do these binaries interact with the CPU when they want something to be done?
ACFS should work with Local OS (Solaris) to communicate with the CPU . Isn't this kind of double work?ACFS dont work with .... but provide filesystem to Local S.O
There may be extra work, but that's because there are more resources that a common filesystem.
Oracle ACFS executes on operating system platforms as a native file system technology supporting native operating system file system application programming interfaces (APIs).
ACFS is a general purpose POSIX compliant cluster file system. Being POSIX compliant, all operating system utilities we use with ext3 and other file systems can also be used with Oracle ACFS given it belongs to the same family of related standards.
ACFS Driver Model
An Oracle ACFS file system is installed as a dynamically loadable vendor operating system (OS) file system driver and tool set that is developed for each supported operating system platform. The driver is implemented as a Virtual File System (VFS) and processes all file and directory operations directed to a specific file system.
It makes sense you use the ACFS if you use some of the features below:
• Oracle RAC / RAC ONE NODE
• Oracle ACFS Snapshots
• Oracle ASM Dynamic Volume Manager
• Cluster Filesystem for regular files
ACFS Use Cases
• Shared Oracle DB home
• Other “file system” data
• External tables, data loads, data extracts
• BFILES and other data customer chooses not to store in db
• Log files (consolidates access)
• Test environments
• Copy back a previous snapshot after testing
• Backups
• Snapshot file system for point-intime backups
• General purpose local or cluster file system
• Leverage ASM manageability
Note : Oracle ACFS file systems cannot be used for an Oracle base directory or an Oracle grid infrastructure home that contains the software for Oracle Clusterware, Oracle ASM, Oracle ACFS, and Oracle ADVM components.
Regards,
Levi Pereira

My computer has crushed so i have to download I tunes again,and maybe all my information will be lost.but i had I cloud and last time when i used to i tunes they have asked me to do I cloud so i did,so now when i will again setup my computer and I tunes

my computer has crushed so i have to download I tunes again,and maybe all my information will be lost.but i had I cloud and last time when i used to i tunes they have asked me to do I cloud so i did,so now when i will again setup my computer and I tunes will i get all my Contacts and Inofrmations cause i had i have an account on I cloud

If you used icloud for your contacts and calendar then you should have no problem. They will all come back on the phone once you put the icloud user name and password in. Itunes does not store the contact information except in a backup file and if you were backing up using icloud you can use that backup to restore with.

HT201694 My dad & I both have iPhone 5s. He no longer uses his & my screen is cracked. If I switch our SIM cards, what data will be lost? It is important for me to save/transfer all photos, video, & *especially* text messages.

My dad & I both have iPhone 5s. He no longer uses his & my screen is cracked. If I switch our SIM cards, what data will be lost? It is important for me to save/transfer all photos, video, & *especially* all text messages. When the SIM cards are swapped between phones, will any of these things be lost/deleted?

helloitsm wrote:
Thank you! I would prefer not to wipe his phone. My cracked screen iPhone still works, so I would ideally like to put his SIM card in my phone for occasional use. As mentioned, he is not using his iPhone anymore for phone calls, but would like to maintain access to photos, video, and all texts. As I use an iPhone for calls, trading the cracked screen is ideal. If I am able to switch them without losing data, I will, but am afraid to do so if there is a chance that any data will be erased. (I'm not sure if the photos, video, and -namely- texts are saved to the actual SIM card. Can text messages be backed up?
iPhone do not store anything on the sim.
Photos should be saved on computer like any other digital camera.
You can restore the backup for your dad as well as for yourself while swapping phones.

HT4623 I am doing the IOS 7.02 update to address security. THe IPAD is now asking me to plug in to ITunes. When I do this, my MAC is saying that the IPAD is in recovery mode and my data will be lost. What happened?!!

I was doing the IOS 7.0.2 update to address security. The IPad is now telling me to plug in to Itunes. When I do so, my MAC is saying the IPad is in recovery mode and my data will be lost. What happened?!! How do i fix?

Something went wrong with the update and you are in Recovery Mode.
Follow the instructions below to recover your iPad.
http://support.apple.com/kb/ht4097

The gmail account with which I had my apple id is not in my use any more , do i need to recreate my apple id and if I do, will I lost all the apps that I have bought.

I kind of lost hold of that gmail id which is uttilised as my appleid will it make any difference . do I need to create new apple id. If I do so will i lost all my apps which I have bought using this id

All content is tied to the account that buys/downloads it and it can't be transferred to a different account, so if you create a new account all of your existing downloads will remain tied to your existing account. If you don't have access to that email address anymore then you should be able to login here and update your account to have a new email address : https://appleid.apple.com/

Will configuration lost if i use Recovery CD to fix file system in CUCM9.1.2?

Similar Messages

Maybe you are looking for