Will CS4 Extended work with Intel Core 2 Duo?

Considering purchasing a CS4 Extended for my OS X v10.4.11 with Intel Core 2 Duo, but reading here I need a multicore Intel processor...
There's no way I could make it work with my processor at all?

Since it says it will run on a G5 I imagine it would run on your newer Intel Mac.  I think that's what the "Duo" means - multi core.  http://en.wikipedia.org/wiki/Intel_Core#Core_Duo

Similar Messages

  • Will Intel Core Duo image work with Intel Core 2 Duo image

    I soon need to start preparing an image for the next school year since we are soon going to start moving into a completely new campus which images will need to be ready for lab imaging over the summer and the sooner I can have a lab image ready to be tested the better, but my question is......
    If I create an Intel image on a "Intel Core Duo Processor " which we have currently, to then create this image and then push out two two complete brand new labs of what will be "Intel Core 2 Duo Processors"
    I know in the past I have created images on the highest PowerPC computer (G5) and had the image on G3's, G4's, G5's etc. an work. I'm not sure if the difference in the processor will require the image to be made on the very same computer or not. If so, we will need to purchase one.
    Anyways..... just wondering if someone has already tested this or played around with it?
    Thanks,
    Carter

    The build version on the Core Duo models is not the same as the build version on the Core 2 Duo models. These individual builds are customized for their respective hardware. The only version of OS X that will be common for all Intel models will be a public build version that supercedes both custom builds.
    The extant builds are here: http://docs.info.apple.com/article.html?artnum=303315. However, the table does not include the latest Core 2 Duo MBP.
    If you upgrade all Intel Macs to 10.4.8 then an image of that version of OS X should be common to all Intel Macs.
    Why reward points?(Quoted from Discussions Terms of Use.)
    The reward system helps to increase community participation. When a community member gives you (or another member) a reward for providing helpful advice or a solution to their question, your accumulated points will increase your status level within the community.
    Members may reward you with 5 points if they deem that your reply is helpful and 10 points if you post a solution to their issue. Likewise, when you mark a reply as Helpful or Solved in your own created topic, you will be awarding the respondent with the same point values.

  • Will Mountain Lion work on my 4 year old iMac with Intel Core 2 Duo   Processor Speed:     2.66 GHz

    Will Mountain Lion work on my 4 year old iMac with Intel Core 2 Duo processor and a 2.66 gHz.
    Really do not want to load it and find there are issues.
    Oh I really not a big tech guy I just want everything to work well.
    And I'm just about to purchase a Mac Book Pro as well.
    Any thoughts and comments would be appreciated
    Cheers

    I also have a 4 year old iMac 24". it is the 3.06 GHz Core 2 Duo. I have been running Mountain Lion since it was released, and before that Lion. Runs great. Over the last month I have noticed some slow data transfers from a USB harddrive. But not enough to do any research. I use a USB harddrive for my Time Machine backup and notice no problems or slow transfers while the Time Machine backup runs. My iTunes has its nedia files on a USB harddrive and is used to watch videos, play music and share photos on the AppleTV. I also use Aperture on the iMac to store and manage 20,000 photos.
    I have 6 GB of ram, 4GB and 2GB memory sticks. I know it is best to have identical ram sticks but my iMac model cannot run 8GB of ram and I feel 6GB is better than 4GB.
    Mountain Lion is a great OS and I am glad I upgraded. It works great with the AppleTV (no airplay but iTunes on the iMac serves up all our music, photos and videos), iPhone, and iPod Touch. Also with my wifes brand new Macbook Pro. All the devices including the iMac can share data on iCloud.

  • HT201364 mid-late 2007? can you be a bit more specific, will Mavericks work on Intel Core 2 Duo 2.66 GHz 4GB ?

    mid-late 2007? can you be a bit more specific, will Mavericks work on Intel Core 2 Duo 2.66 GHz 4GB ?

    Welcome to Apple Support Communities
    It looks like you can upgrade to OS X Mavericks (you have got an Early 2009 iMac). Follow these steps to upgrade > http://www.apple.com/osx/how-to-upgrade
    Before upgrading, make a backup of your files with Time Machine and check that your apps are compatible > http://www.roaringapps.com

  • Will Lion 10.7.x run on MacBook Pro 17", MacBook Pro 2,1 with Intel Core 2 Duo, 2.33 GHz ?

    Will Lion 10.7.x run on a 63-month old MacBook Pro 17", MacBook Pro 2,1 (2GB RAM) with Intel Core 2 Duo, 2.33 GHz ?
    Currently running Leopard 10.5.8 and about to update to Snow Leopard.

    It will run, if that's what you want. I'd think twice though. If you want to try Lion, upgrade your RAM to the max: 4GB's(Apple says 3, but your machine will run 4), however only a little over 3GB's will be able to be addressed(limitation of your computer). IMO, Lion needs a minimum of 4GB's of RAM to function properly. In your case, you'd be a little shy. I'd suggest you go to SL & stay there.

  • I have an iMac and a MacBook with Intel Core 2 Duo processors. I realize that this is within the stated requirements for Lion.  However was wondering if by migrating to Lion this will result in too much demand on processor resources, thus a slower machine

    I have an iMac and a MacBook with Intel Core 2 Duo processors. I realize that this is within the stated requirements for Lion.  However was wondering if by migrating to Lion this will result in too much demand on processor resources, thus a slower machine than using Snow Leopard?

    Which iMac?  Which Macbook?   Both have had several model
    itertations, even within the framework of a Core2Duo processor.
    With that said, I have an early 2009 iMac 24", with 2.66 GHz
    Core2Duo with 8 gig of RAM, and in my opinion, seems to be running
    smoother and faster with Lion.

  • MultiCore Intel Processor with 64-bit support--how compares with Intel Core 2 Duo?

    TurboTax Home & Business 2013 requires Multi Core Intel Processor with 64-Bit support. Does this mean it will not run on my MacBook with Intel Core 2 Duo?

    https://ttlc.intuit.com/questions/1943476-64-bit-requirements-for-turbotax-mac?e vent=new_question

  • I have a MacBook 4,1 with Intel Core 2 Duo processor, 2GB memory, what do I ned to do to be able to download Itunes 10.5 so I can use my new Iphone 4s?

    I have a MacBook 4,1 with Intel Core 2 Duo processor, 2GB memory, what do I ned to do to be able to download Itunes 10.5 so I can use my new Iphone 4s?

    When I tried to activate my phone through ITunes it said I needed iTunes 10.5. I tried to download it and it wouldn't work. Do I need Snow Leopard?

  • I am running OSX 10.5.8 on a 2008 Imac with  Intel Core 2 duo am I compatible with OSX 10.6 snow leopard, much less Lion and Mountain Lion?

    I want to link all my apple products so I can use icloud with ease but I am running OSX 10.5.8 on a 2008 imac with intel core 2 duo and not sure it's going to be beneficial or compatible. Is my desktop really just an external hard drive alreadt in 5 years? I just purchased a mac book pro 2012 and also have a 3Gs iphone I just want to have a happy apple family ; )

    Your computer is compatible with all of those OSes, but may need more RAM to run 10.7 or 10.8. As the RAM requirement is the same for both 10.7 and 10.8, don't bother with 10.7 unless you're using software incompatible with 10.8.
    (71851)

  • MacBook Pro 17" with Intel Core 2 Duo startup freeze with 10.6.8?

    With my MacBook Pro 17" with Intel Core 2 Duo, 2.33 GHz startup freeze with 10.6.8 - I had problems after several SW upgrades. Startup ends every time in a freeze or a crash, nothing is running, i am not able to type in the password. it starts in beginning with thin colored disrupting lines on the display and this get more and more and than freeze the system.
    "Save Boot", startup with shift shows no problems, display is ok, no freeze. So something must new in the video-driver. Is there any driver what I can delete or any new software to help in this issue?

    try to boot off the cd installazzione, when the screen appears to follow thePACKING screen viewing. If you've already looked in the manual are your problem?

  • Can I install Mountain Lion 64-bit over top of 32-bit version installed by mistake.  M/c is 24-inch mid 2007 iMac with Intel Core 2 Duo (64-bit?)

    Can I install Mountain Lion 64-bit over top of 32-bit version installed by mistake.  Machine is 24-inch mid 2007 iMac with Intel Core 2 Duo (64-bit?)

    Welcome to Apple Support Communities
    Mountain Lion is a full 64-bit operating system. Why do you think Mountain Lion is 32-bit in your computer?
    To check that you are definitely using a 64-bit operating system, open Terminal (in /Applications/Utilities) and type:
    uname -a
    Then, tell us what you see at the end after RELEASE. If you see i386, you are running a 32-bit operating system. If you see x86_64, you are using a 64-bit operating system. Also, the processor of your Mac is 64-bit

  • Problems with intel core 2 duo and yosemite

    I have a 2008 imac with intel core 2 duo and 4GB SDRAM,  Currently, I am using Mavericks (oxX 10-9.5.  Is my iMac too old to profit from Yosemite?  What problems could I have that newer iMacs do not have?

    I have a 2008 imac with intel core 2 duo and 4GB SDRAM,  Currently, I am using Mavericks (oxX 10-9.5.  Is my iMac too old to profit from Yosemite?  What problems could I have that newer iMacs do not have?

  • Problem installating Snow Leopard on old Macbook Pro with Intel Core 2 Duo. After creating partition on internal hard disk (Extended Journaled), installation starts but stops at half of the progress bar. Screen asking Restart appears.

    Hello:
    I have tried installing Snow Leopard via the installation disc on a Macbook Pro (2007) with an Intel Core 2 Duo, but I the installation has failed more than 5 times.
    I have first formatted and partitioned the internal hard disk with Mac Os Extended Journal format.
    Once the installation starts, it starts without a problem unti lthe progress bar gest until half completed then a screen asking for a Computer Restart shows up.
    It asks to press the power button for some time until it the computer shuts down and then, press again to turn it on.
    Once turned on, the installation disc gets readed, the installation screen appears again and asks again to start the whole installation process form the beginning.

    Then you have a Hardware Problem.
    Your system is Crashing part way through the install and Re-Booting because of the crash.
    Could be the drive itself or it could be some other hardware part in your system. Like the RAM.
    To check if it is the internal drive connect an External drive to the system by USB and do the install on that external. If the install completes then it more then likely the drive is bad. If it crashes again then it is more then likely some other piece of hardware in your system.

  • Updating Firefox for MAC G5 X.5 non Intel, and also with Intel -core 2 duo (non x86?).

    Dear Firefox and Mozilla,
    My wife has a MAC G5 10.5.8 Power PC. She gets upgrade messages from you and can not contact you, as some smartypants has a popup that says she can't until she upgrades. Probably because she doesn't have the INTEL core, she can not download the latest Firefox. Will you be supporting non Intel?
    I have an Intel Core 2 Duo on my MAC G5 MacBook......not the x86??, and have Firefox 8.0.1.....which seemed not to like me at the 7.0 download. Are there issues or considerations that I should be aware of?
    Thank you for your time and help. We appreciate the work that goes into having Firefox here for us.
    Garfield Barnes

    As of Firefox 4.0 and newer only the Intel is supported as the PPC was dropped and 64-bit was put in place with the 32-bit version.
    For PPC Macs there is two options. Either you can use the current 3.6.* version from http://www.mozilla.org/en-US/firefox/all-older.html
    Or you can try a third-party version of Firefox 8.0 from http://www.floodgap.com/software/tenfourfox/
    However do see http://code.google.com/p/tenfourfox/wiki/PluginsNoLongerSupported if you use this version.

  • P6N SLI with intel core 2 duo e7500 does not post

    Heres my set up MSI P6N Sli 4 gigs Corsair 800mhz gaming ram intel sl9kn 3.0.6 ghz single core cpu Silver Stone Strider series 700watt psu 2 harddrives 1 250gig ide 1 320 gig sata. A EVGA G4orce 9600Gt 512mb video card. I recently bought a intel core 2 duo e7500. When the e7500 is installed fans spin up but no video. When The sl9kn is installed everything functions normally. I had the e7500 tested and it posts fine in other motherboards but not in my p6n sli. Everything functions normal with the sl9kn. I know this because im using the system to write this post =). I cleared the cmos per the manual and updated the bios as well but still no changes with the e7500(intel) cpu. The e7500 is in the compatability list on the msi site. I am all but convinced this is a compatability issue with something else i have installed. The only thing that was changed was the cpu to the e7500 and nothing else was touched. Since the system functions normally with my old cpu (sl9kn) i have put it back in for now. Any help or ideas on this problem would be greatly appreciated.

    Quote from: Yeatoast on 04-September-09, 23:07:40
    If im correct you referring to possibly replacing the socket so the cpu fits the board and the pin count is the same. If so this has already been checked and the cpu fits the board pins and all. Considering the board is only a few months old and the cpu and the board both are socket lga775 the only real difference is the one being used is 65nm and the e7500 is 45nm. The board was designed with core 2 duos in mind wich nearly all of them are 45nm. The board also supports quad cores wich are 45nm. The only other thing I have noticed is my ram is not on the list of modules tested to be ok on the board. The techs where I bought the board were baffled as to why it wont post but if the revision number will help the board version is 1.0 The only other thing left to do is swap ram. As before though everything functions until the cpu is changed. MSI and Intel both have told me the board supports the e7500 even version 1.0
    No im not referring to the pins, I know its LGA775.
    Im referring to a parts update, extra chip, to make sure 45nm dualcores work.
    45nm Quads are not going to work, nor will they ever on this board.
    Read here for cpu compatibiltylist:
    http://eu.msi.com/index.php?func=prodcpu2&prod_no=1141&maincat_no=1
    The only possibility is to send it in, since your board has revision 1.0
    Read here also:
    https://forum-en.msi.com/index.php?topic=123486.msg932471#msg932471
    I have the somewhat more expensive version of your board, the P6N SLi Platinum and have the same issue and since the chipset is identical, you also have to upgrade.
    This is all due to chipset limitations and thus an NVidia issue, since they provided the chipset, (this said before going to bash/complain/rant about MSI  ).
    Edit:
    This board was made/designed pre 45nm cpu's and made/designed for 65nm cpu's.
    Now they are mostly 45nm, when the board was made, 65nm was common and 45nm was still under development.
    That you bought the board new, a couple of months ago, doesnt say anything about its production date or about its support for cpu's, it could have been on the shelf for a long time.

Maybe you are looking for

  • Can not store data to append structure in mara

    Hi after make the following steps, I have problem, please give me some tips. thanks 1, Append structure Zcode in MARA. 2, Created a ZMGD1 via SE80 copy from function group MGD1. 3, modify screen 0001, put this Zcode in this screen and FC MARA-Zcode.

  • Can SWESetRowCnt be used with ExecuteQuery?

    In Siebel 8.0, I can use SWESetRowCnt to increase the number of rows returned by GotoView from the default of 10 to a higher number. However, I tried using SWESetRowCnt to increase the number of rows returned by SWECmd = InvokeMethod & SWEMethod = Ex

  • Problem developing the HelloWorld Project for Motorola IDEN Emulator

    Hi all, I have tried to create the HelloWoirld application per the Emulator help. When I try to run the application in the emulator I get the following messages: start building... compile C:\myprj\HelloWorld.java... preverifying... packaging... addin

  • Users & Groups not in Get Info options

    When opening a Get Info window to change Sharing & Permissions, adding a new entry to the list shows maybe 4 options when the OS has dozens of users & groups. Why are standard options like "staff" not showing up?

  • ITunes has stopped working when app tab it hit

    When I plug in my iPad 4, that is running iSO 7.0.2, with windows, to iTunes and click on the apps tab, it immediately says " iTunes has stopped working" then it completely shuts down....I have removed and reinstalled several times and tried hitting