Will CUE Unity Express 8.6.7 integrate & work with CME 10.0 & 10.5

Hi,
Will CUE Unity Express 8.6.7 integrate & work with CME 10.0 & 10.5
As i am having currently CUE 8.6.7 and wanted to upgrade my CME 9 to 10.0 or 10.5.
Thanks.

Hi there,
You would require CUE 8.6.9 or 8.6.10 as shown below;
Table 1: Cisco Unity Express: Unified CM Express and Unified SRST Versions
Cisco Unity Express Versions
2.0.x
2.1.x
2.2.x
2.3.x
3.2.x
7.0.x
7.1.x
7.2, 8.0
7.3, 7.4, 8.5, 8.6
8.6.7
8.6.9
8.6.10
3.1.x
Cisco Unified Communications Manager Express
Versions
and
Cisco Unified Survivable Remote Site Telephony Versions
3.0, 
3.1
3.2, 
3.2(1)
3.2(2)
3.3, 
3.4
4.0
4.0(1), 4.0(2), 
4.0(3)
4.1, 
4.2
4.3/7.0
7.1
8.0
8.1
8.5, 8.6, 8.8, 9.x
10.0, 10.5
Before version 4.1, Cisco Unified Communications Manager Express was known as Cisco Unified CallManager Express.
From;
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/unity_exp/compatibility/cuecomp.html
Cheers!
Rob 

Similar Messages

  • Will older Airport Express Base Station A-1084 work with new AirPort Extreme? I want to use it as an access point for my ps3 for watching movies and just connectin to Internet.

    I am lookin to plug in an older model a-1084 next to my playstation for a dedicated access point to avoid dropping so many connections since I am at the furthest point of my wifi coverage. Will it work or not? It would be connecting through a AirPort Extreme bought in 2011 -2012.

    This will work if you plan to connect the AirPort Express using a wired Ethernet connection back to the AirPort Extreme.
    But, it won't work if you plan to connect the Express using wireless only. That's because your older version of the Expess does not have a setting to "extend a wireless network", so it's not possible to "extend" the wireless signal using wireless only.
    If you added a "new" AirPort Express, that version does have the capability to "extend a wireless network" from the AirPort Extreme using wireless only.
    Keep in mind that to "extend" using wireless, the Express will need to be located where it can receive a strong signal from the AirPort Extreme, since the Express can only "extend" the quality of signal that it receives. In other words, the Express can make the signal go further, but it cannot make the signal go faster.

  • Will the mini display port to vga adapter work with a 2007 mac book?

    will the mini display port to vga adapter work with a 2007 mac book?

    I think your Macbook came with a Mini DVI port instead of a Mini Display port.

  • Raw files from the new Nikon D810 will not open with either Photoshop CS5.1 or Lightroom 4.  When will a real Adobe solution be available to work with Raw (NEF) files in their native format, using CS5.1 and LR4?

    Raw files from the new Nikon D810 will not open with either Photoshop CS5.1 or Lightroom 4.  When will a real Adobe solution be available to work with Raw (NEF) files in their native format, using CS5.1 and LR4?

    Clarification: this is a user forum; you are not addressing Adobe here.
    The answer to your question as phrased is: never.
    CS5 is history and it is not longer supported.  There will not be any updates or bug fixes for CS5.
    You need to convert the raw NEF files from your D810 to raw DNGs using the free, standalone Adobe DNG Converter 8.6 RC (beta), the first version ever to support that camera.. 

  • Will the HP LaserJet P2035 Monochrome Laser Printer work with the I mac

    will the HP LaserJet P2035 Monochrome Laser Printer work with the I mac

    If you need any specifications on the printer I would suggest visiting this link:
    http://h20000.www2.hp.com/bizsupport/TechSupport/Home.jsp?lang=en&cc=us&prodType Id=18972&prodSeriesId=3662025&lang=en&cc=us
    You can find drivers, user guides, and all kinds of data at that site to determine if it will work right for you.
    Hope this helps!
    I work with HP

  • Will an OS X Version 10.4.11 work with a wireless router?

    Will a OS X Versionb 10.4.11 work with a wireless router?

    blue apple > about this mac > more info button. Click on the hardware line. It has a little triangle in front of the work hardware.
    If you do not have an airport card.
    Ethernet BridgeEthernet Bridge  "The versatile Wireless-G Ethernet Bridge can make any wired Ethernet-equipped device a part of your wireless network."  from linksys example: http://www.amazon.com/Linksys-RE1000-Wireless-N-Range-Extender/dp/B005FDXMJS/ref =sr_1_1?ie=UTF8&qid=1314563758&sr=8-1    Setup: http://www.linksys.com/servlet/Satellite?c=L_Product_C2&childpagename=US%2FLayou t&pagename=Linksys%2FCommon%2FVisitorWrapper&cid=1134692497433
    USB dongle
    Introducting RokIt, a new wireless USB adapter that is compatible with Mac OS 10.3, 10.4, and 10.5 Leopard. http://rokland.com/store/product_info.php?products_id=319
    Newer Technology MAXPower 802.11g/b Wireless USB 2.0 Stick Adapter $15.99 http://eshop.macsales.com/item/Newer%20Technology/MXP2802GU2/  Newer Technology MAXPower 802.11n/g/b USB Adapter. The easiest way to add Wireless Connectivity to ANY computer! $29.99 http://eshop.macsales.com/item/Newer%20Technology/MXP802NU2C/

  • HT4757 Will this software make my Canon Powershot A700 work with os x 10.8.2 and iPhoto 11 v. 9.4.1?  Is there any way to get my camera compatible with this computer?

    Will this software make my Canon Powershot A700 work with os x 10.8.2 and iPhoto 11 v. 9.4.1?  Is there any way to get my camera compatible with this computer?

    First Try the following:
    1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
         User/Home/Library/ Preferences folder.
    2 - delete iPhoto's cache file, Cache.db, that is located in your
    User/Home/Library/Caches/com.apple.iPhoto folder (Snow Leopard and Earlier).
    or with Lion and Mt. Lion from the User/Library/Containers/com.apple.iPhoto/
    Data/Library/Caches/com.apple.iPhoto folder
    3 - launch iPhoto and try again.
    NOTE:  In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
    If that doesn't help apply the two fixes below in order as needed:
    Fix #1
    1 - launch iPhoto with the Command+Option keys held down and rebuild the library.
    2 - run Option #4 to rebuild the database.
    Fix #2
    Using iPhoto Library Manager  to Rebuild Your iPhoto Library
    1 - download iPhoto Library Manager and launch.
    2 - click on the Add Library button and select the library you want to add in the selection window..
    3 - Now that the library is listed in the left hand pane of iPLM, click on your library and go to the Library ➙ Rebuild Library menu option.
    4 - In the next  window name the new library and select the location you want it to be placed.
    5 - Click on the Create button.
    Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments.  However, books, calendars, cards and slideshows will be lost. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.

  • Will a D-Link DP-301P+ print server work with an HPLaserJet 5MP

    Setup includes the following:
    HP LaserJet 5MP (90's model and this thing is a true workhorse!)
    Apple Airport Extreme wireless router
    Dual 2GHz PowerPC G5 (OSX.4.11)
    iMac (OSX.6)
    Mac Mini (OSX.6)
    I purchased a D-Link DP-301P+ Fast Ethernet Print Server, with the intent to plug it into the printer's parallel port (36 pin) and then plugging an ethernet cable between the server and the wireless router.  The only catch is that in order to plug the server into the printer, I will have to dremel out a small portion of the exterior casing of the printer (this is on the back side so it won't be noticeable).  Thus my two questions......will this setup even work?  Are there any special software settings needed?  Thanks for helping out with this. 

    Hi gwadler,
    Thank you for visiting the HP Support Forums. Since this is a duplicate post I'm going to lock this one, please check your other post here for replies:
    http://h30434.www3.hp.com/t5/Mac-printing-and-scanning/Will-a-D-Link-DP-301P-print-server-work-with-...
    Thanks!
    Wendy M - HP Support Forums Moderator
    Click the Kudos star as a way to say "thank you" for helpful posts.
    Be sure to come back and click the 'Accept as Solution' button on the post that solved your issue - it may help someone else.
    Rules of Participation

  • Will my Mac Pro 3.1 early 2008 work with Nvidia Geforce GTX460 768 graphix card?

    will my Mac Pro 3.1 early 2008 work with Nvidia Geforce GTX460 768 graphix card?

    Depends upon the OSX version you have.. You need 10.8.3 or later for a non- Mac flashed card. For more detail:
    User Tip: Mac Pro silver tower (2006-2012) Replacement Graphics cards

  • Will the at&t version of iphone 5 work with t-mobile?

    Will the at&t version of iphone 5 work with t-mobile? As I have a t-mobile prepaid plan and I really wanna buy it!!!
    And will t-mobile provide me with a nano-sim?

    Yes, but the officially unlocked iPhone is not available for sale in the US, at present. T-Mobile will have nano sim cards & they are advertising that iPhone 5 owners switch to their service.

  • Unity Express: More than one phone / DN with a voice mail box

    I'm running Unity Express 8.0.2.
    Is there a way to associate two extensions on separate phones, with one voicemail box?

    Hi
    From memory, you can add the second extension number as the "Primary E.164 number" on the user associated with the voicemail box.
    That way both phones should be associated with the same VM box.
    HTH. Barry

  • Will a Trust Flat Scan USB 19200 Scanner work with my Macbook.

    I have an older white Macbook running OS 10.4.11. I have been offered a Trust Flat Scan USB 19200 Scanner in good working order and would like to know if it will work with my Macbook ?
    Hope that this is the correct section in which to ask, if not, apologies.
    Cheers
    Brian

    Only if you can find a driver for it. Do you know whose engine is in the scanner? I don't think Trust is a manufacturer so they may be using the scanning engine from another manufacturer.
    OS X does not include a driver for that brand nor is it recognized by VueScan. Without a driver it will not work on a Mac.

  • Will ink and slide ever be available to work with Adobe Ideas?

    Or is there a way to make it work, it actually works well with Paper App by 53. I don't understand why it seems impossible to connect it to Adobe Ideas!

    Ink should work with Adobe Ideas as a passive stylus.  In other words, it will allow you to draw and tap, but pressure sensitivity and palm rejection are not currently supported.  If Ideas is not recognizing Ink, make sure Ink is on by holding down the button until the LED turns on and goes through the rainbow sequence. 
    We are continuing to add Ink & Slide functionality to Adobe's mobile apps and will announce support as it becomes available.  Please stay tuned.  Thanks!
    Cathi Kwon
    Principal Product Manager, Adobe Ink & Slide

  • Will MacOffice 2011 (v. 14.3.1) work with Mavericks?

    I know this is probably a stupid question, but I have MacOffice 2011, version 14.3.1. I haven't yet upgraded to 14.3.8. (in the process of doing so, but I can't find version 14.3.3 to download, but all the others are there). Will Mavericks work with the version I have now? (I haven't downloaded Mavericks yet)

    Hi...
    Yes. It should work ok. Then update after installing.
    Work fine on my Mac.
    Regards
    Dennis

  • Will the dock keyboard for first generation iPad work with iPad third generation?

    Will the dock keyboard for first generation work with the new iPad third generation?

    It should, which is based only on the fact that the connections are remaining the same (the 30 pin usb connection)
    that said, the 3 is thinner and smaller than the first one, so if it's dependant on a tight fit it may not work exactly like it does on the 1.

Maybe you are looking for

  • How to get a tree item when my mouse moves

    I want to get the tree item which my cursor points to when my cursor moves over a tree. I can get a row index in itemRollOver event, but it seems useless. And I don't know how to use getObjectsUnderPoint method. Is there anyone who can help me?

  • HT204053 How do I use the same email for two different apple IDs?

    I have inadvertently created two different Apple IDs throughout the years but now need my most recent one to use my email, but still want access to my old apple ID (if I can find it). The old apple ID has priority (the new one is not allowed to verif

  • IMac is starting with only 2 cpus

    Hello, Two weeks ago my iMac started restarting by itself. It couldn't start the OSX, but restarting just before the login screen. I was investigating this issue for a whole day until I found that if I set boot arguments to CPU=1 it starts just fine.

  • HT4859 How do I get back music on icloud to my PC itunes

    I seem to have lost over 50 gb of music from my itunes on my PC screen but its still in icloud according to my iPad - how do I get it back to the 'mother' iTunes account?

  • Listener cannot solve service name

    Our server has 2 databases (8i) on AIX 4.3.3. I created a new one (newdb) for trainning. I modified listener.ora at /etc and $ORACLE_HOME/network/admin folders. Also modified tnsnames.ora on server side. On my workstation, there are 2 Oracle home. On