Will dbms_stats.export_database_stats also export pending stats in 11g?

Hi all
In 11g, will the dbms_stats.export_database_stats procedure also export pending stats?
There is an export_pending_stats procedure but we want to export both published and unpublished stats.
Thanks,
Louiza

Check here:
[DBMS_STATS|http://www.morganslibrary.org/reference/dbms_stats.html]
[http://download-uk.oracle.com/docs/cd/B28359_01/appdev.111/b28419/d_stats.htm]
HTH
-Anantha

Similar Messages

Question on Exporting Table Stats to another database

I have a question exporting Table Stats from one schema in database A to another schema in another database B.
Currently running Oracle 9.0.2.6 for unix in both prod and dev.
Currently table stats are gathered using the ANALYZE TABLE command. We currently don't use the DBMS_STATS package to gather table statistics.
Question:
If I execute DBMS_STATS.EXPORT_TABLE_STATS in database A can I import them to database B if I'm only using the ANALYZE TABLE to gather table stats? Do I need to execute the DBMS_STATS.GATHER_TABLE_STATS package in database A prior to excuting DBMS_STATS.EXPORT_TABLE_STATS ?
The overall goal is to take table stats from Production in its current state and import them into a Development environment to be used for testing data / processes.
Yes we will be upgrading to Oracle 10 / 11g in near future.
Yes we will be changing our method of gathering table stats by using the DBMS_STATS package.
Thanks,
Russ D

Hi,
If I execute DBMS_STATS.EXPORT_TABLE_STATS in database A can I import them to database B if I'm only using the ANALYZE TABLE to gather table stats? You need using the DBMS_STAT package for get and export statistics process if you want migrate the stats to other database.
Do I need to execute the DBMS_STATS.GATHER_TABLE_STATS package in database A prior to excuting DBMS_STATS.EXPORT_TABLE_STATS ?Yes, you need executing first DBMS_STATS.GATHER_TABLE_STATS.
Good luck.
Regards.

Promotion and report schedule job goes to pending state

hi everyone,
we are using BO4.1 SP02 Patch 1 platform, suddenly now report schedules and promotion jobs are not promoting and it goes pending state.
we restarted the LCM APS and AJS , but still promotion job in pending state
we also restarted Webi APS and AJS but still schedule in pending state.
anyone faced this problem before, could you please help us to find the cause.
Regards,
Ganesh

HI Ganesh
Can you make it 1 and try out once
Because 1 = OUTPROC and 100 = MIXEDPROC
Outproc causes the job server children to shut down after every job
Mixedproc causes the job server children to shut down after every 100 jobs
and Job server children will be automatically shutdown if left unused for more than 2 hours
Can you check the taskmanager for the jobserverchild.exe is created or not ???
Please get back

I have Adobe Premiere Elements and it will not let me export?

I have Adobe Premiere Elements and it will not let me export? It also will not let me login. It says photoshop.com is temporarily unaivalable and to check my network settings. Error 400. Can anyone help me? I need to export this video as soon as possible.

You don't say which version of Premiere Elements you're using, but Photoshop.com was discontinued last year, so you won't be able to log into it.
As for exporting -- it's hard to give you specific information without knowing which version of the software you're using and on what operating system but -- which Share or Publish & Share option are you using and what is happening when you use it?

My ipad has a password that I can't remember and it's not connected to the internet, so my computer won't recognize it and I know that when all get this figured out that it will be set back to factory state but how do I get it there

My ipad has a password that I can't remember and it's not connected to the internet, so my computer won't recognize it and I know that when all get this figured out that it will be set back to factory state but how do I get it there

If you've forgotten the passcode to unlock your iPad then there are instructions on this page for how to reset the iPad (your iPad doesn't need to be connected to the internet) : http://support.apple.com/kb/HT1212
If your computer's iTunes isnt recognising the iPad when you connect it then have you got a recent version of iTunes installed on your computer ? There are also troubleshooting pages for a device not showing in iTunes on these pages :
PC : http://support.apple.com/kb/TS1538
Mac : http://support.apple.com/kb/TS1591

Databases in Recovery Pending state

Dear all,
Need your expertise to understand bit more.
Yesterday i came across databases in "Recovery Pending" state problem.
Followed too many recommendations form Google but to no avail.
e.g. http://dbamohsin.wordpress.com/2012/01/23/cannot-detach-a-suspect-or-recovery-pending-database/
Plucked some leafs from Paul Randal's articles as well http://www.sqlskills.com/blogs/paul/post/Search-Engine-QA-4-Using-EMERGENCY-mode-to-access-a-RECOVERY-PENDING-or-SUSPECT-database.aspx
But none of them could fixed my problem.
What i did:
I installed 2008 r2 on a machine (DEV) which already had 2008; yea instance name was different.
Had to restart the server so i did (yea, i gave all developers enough time but due to some reasons databases were in recovery pending mode).
After restart, some databases (not all) were in recovery pending state. Above links provided enough stuff to recover them but didnt work. For instance after setting database in Emergency mode, it stayed there for ages telling something like "Database is
being recovered, wait until recovery is finished".
How i fixed it:
I attached them onto the newly created 2008 r2 instance. Made them offline (on old instance) in case there is any access conflict. Didnt get any error, like files are in use or something, while attaching them (which raised an eyebrow).
Couple of things i noticed after new instance's installation:
While trying to reattach database on same old instance, I wasn't able to see the .mdf and .ldf files form there respective drives. But i was able to see from the new instance.
WHY?
Both sql server services (old and new) were using same service account. When i gave service account enough ntfs permissions on the drive i was able to see all .mdf and .ldf files.
Questions are:
1) Why it wasnt the case before? Important to note here: service accounts were local admins on the server.
(I think i am answering myself here...would love to get more insight on it).
2) Is it normal that i just have 2008r2 tools in Start>>Program. e.g. there is just 2008 r2 management studio not 2008 one etc.
Dont want to let this happen in production environment (i will have backups though), so is there any approach you guys are using to avoid it.
I hope i made myself clear here, or let me know.
Thanks in advance for any help.
Dinkar Chalotra

If you dont need your log file, you can:
Detach your database
Move the log file to other place
Attach back the database and from the file list, remove the ldf
SQL server will create a new log file and the database will be online again.
Escarcha

Reports stay in a pending state

Hi all, I'm hoping to find a little bit of help in regards to an issue I'm having on a Crystal Reports XI R2 server. When reports are scheduled now they stay in a "pending" state and don't run correctly. I've verified that all the servers (they're all on one physical machine) are started and have rebooted, too.
I get a couple of errors in the event viewer:
Event Type:     Warning
Event Source:     BusinessObjects_jobserverchild
Event Category:     Transport
Event ID:     34700
Date:          10/1/2008
Time:          4:32:05 PM
User:          N/A
Computer:     CR-SERVER01
Description:
Transport error: Communication failure.
Event Type:     Warning
Event Source:     BusinessObjects_w3wp
Event Category:     Transport
Event ID:     34700
Date:          10/1/2008
Time:          4:32:32 PM
User:          N/A
Computer:     CR-SERVER01
Description:
Transport error: Communication failure.
I've setup a trace but didn't see anything that stood out as an issue, although I certainly could have missed something. Any hints on steps I could take to get the reports publishing again?

well if you need help right away you should open a message with support and get an engineer assigned. I don't normally work on reporting issues so not much help I'm afraid.
You said the servers are started but are they also enabled in CMC? CCM?
The issue could be from the CMS or job server, did you trace both? The CMS is responsible for sending the job to the job server (at which time it should go from pending to running).
Regards,
Tim

Which version of the Forms Central subscription will allow me to export data to excel (CSV file)?

Which version of the Forms Central subscription will allow me to export data to excel (CSV file)?

Hi Heather 349
I believe you can do it with both FormsCentral Basic and FormsCentral PLUS
Also Refer : Tutorial: Exporting Responses to Excel, CSV or PDF

Standby CM Hangs in pending state

I have a Standby CM running 4.0.9 that we just installed. Tried to upgrade it to 4.0.19 and it just sat there in pending state for a long time. It appeared to be hung because I couldn't get to it remotely any longer. Rebooted the box and set it up as an AA instead. The game plan was to get it upgraded, then convert it to a Standby CM. So now the box sit's, showing online via the CM as a Standby CM (even though it's set to AA) and it still sits there in pending state. How can I get this resolved? TIA

The Primary CM is running 4.0.19. I managed to blow it away in the Primary CM. Forced a CMS de-registration on the AA. Re-registered it as an AA and got the code upgraded to 4.0.19. (I did hit what I believe is a bug her which I will explain later). Now I need to change it's funtion to a Standby CM but I don't know if I can do this from the Primary CM.
So the bug I hit was that when the WAAS was rebooted to load the new code I lost connectivity for a long time. Check the switch that it was connected to and saw the interface was up/down. Bounced the interface on the WAAS and it came back. Fortunate for me the box is in our DC. Had this been remote I'm not sure a bounce of the switch interface would have worked. FYI - I have my interfaces on an etherchannel with the load-balancing set to ip-dst (round-robin didn't work).

Pending State... for a day

I have an H.264 Blue Ray file I have exported from Premiere that is 22G. When I try to build the disc I keep getting an error about how it is in "pending state". I happened to have to do something and just left the program going thinking Encore just needed to do it's thing but that's been a day now and I still get the some message. Any ideas?

If exported as H.264 Bluray, you should use settings that allow it to show as "Do Not Transcode." The file may be a bit too big, depending on what else you have in the project.
Unrelated to that, it helps troubleshooting to use the "transcode now" option to separate problems with transcoding the asset from other issues in the project.

CiscoWorks 3.1 RME devices hung in pending state

I added over 4800 devices to my new instance of CiscoWorks LMS 3.1 using the dcrcli tool and a about 75% of them are stuck in the RME pending state. About 900 of them have moved to the normal state and inventory and config archive collection has been successful on them. 3950 have not moved from the pending state and when I click pending no devices show up. They also show as failed under the inventory collection state. I am new to CW so any help would be apreciated.
Thanks!

Is LMS integrated with ACS?

11G Grid control - Target is temporarily in status pending state.

Hi,
I'm using 11G OMS, where at a point of time I can see many unknown targets with message "Target is temporarily in status pending state."
There are different databases running on different hosts are showing the same error.
Thanks
KSG

KSG,
Can you try below commands on agent to get status & upload/reload , last upload time & target being monitored
Also have check in /etc/hosts of agent host should be in below format
<IP> hostname.domainname hostname
Check ping telnet for connectivity between agent & OMS
HTTP Console Port : 7789
HTTPS Console Port : 7800
HTTP Upload Port : 4890
HTTPS Upload Port : 4900
Agent Port : 3872
Repository Port : 1521
Enterprise Manager Central Console Port = 4889
Enterprise Manager Central Console Secure Port = 1159
emctl status agent
emctl upload
emctl reload
emctl config agent listtargets Thanks,
Ajay More
http://www.moreajays.com

How to find list of pending statements ????

How to find list of pending statements ? I want to show a report using SALV_WD_TABLE component for providing basic ALV features like sorting, filtering, exporting to excel sheet. ?

Aisurya Kumar Puhan wrote:
Hi kris,
> No not any standard component using for this.. I need only to know in which tables i can find these.....
>
> Thkx
> Aisurya.
You need to elaborate your requirement.
this is not leading anywhere.
thanks
sarbjeet singh

Packages stuck in pending state on a new DP

I created a new DP and 80% of all the packages were distributed successfully but there are some packages that did not get copied. Current status shows that it is still pending. When I attempt to cancel or re-distribute the package, distmgr.log
shows "Package xxxxx is in Pending state and will not be processed..." There are no references to these pending packages in the smsdpprov.log.
PkgXferMgr.log and PkgXferMgr.lo_ do not date back far enough for me to review.
I am running SCCM 2012 R2 with no cumulative updates. I was planning on installing CU4 next week.

I was able to "fix" this issue by Updating Content from the Software Library. No idea why the primary server didn't just send these packages the first time. Time to upgrade to CU4.

Help!!! Premiere Proc CC will not let me Export!?!?!?!

Helo,
I have Creative Cloud for my Pc. I downloaded Premiere Pro CC onto my Pc. I had made a video, and exported it already. When I was going through the video again I found a mistake, so I deleted that video, went into Primere Pro CC and fixed the mistake. But now, Premiere Pro CC will not let me export the video?!?! It lets me click on the export, but it wont let me click on media, or any other options except forBatch List, AAF, and Final Cut Pro XML.
Also, in my apps section od Creative Cloud, it says that Premiere Pro CC has an update and that it has "Bug Fixes"... When I go to update it, it says that the update failed because it cannot locate the files?!?!
Thank you for your help!

Be sure the sequence is highlighted before trying to export.
Not sure on the update.

Will dbms_stats.export_database_stats also export pending stats in 11g?

Similar Messages

Maybe you are looking for