Will DBMS_STATS impact the NCHAR in a table ?

will DBMS_STATS impact the NCHAR in a table ? few jobs running slow after DBMS_STATS gathered statistics, why its so?

will DBMS_STATS impact the NCHAR in a table ? OK, I give up.
Please provide reproducible test case where "DBMS_STATS impact the NCHAR in a table ".

Similar Messages

If I restart my MBP to factory setting, will it impact the OS?

I have upgraded my OS to OS X Mountain Lion.
If I am planning to set my macbook pro to factory setting, will it impact the OS?
I am planning to sell my macbook pro. Bought it in early 2011.
Thanks in advance for the advice.

Found this.
Lion and Mountain Lion (if pre-installed on the computer at purchase*)
         Note: You will need an active Internet connection. I suggest using Ethernet if possible because
                   it is three times faster than wireless.
          1. Restart the computer while holding down the COMMAND and R keys until the Mac OS X
              Utilities window appears.
          2. Select Disk Utility from the Mac OS X Utilities window and click on the Continue button.
          3. After DU loads select your startup volume (usually Macintosh HD) from the left side list. Click
              on the Erase tab in the DU main window.
          4. Set the format type to Mac OS Extended (Journaled.) Optionally, click on the Security button
              and set the Zero Data option to one-pass.
          5. Click on the Erase button and wait until the process has completed.
          6. Quit DU and return to the Mac OS X Utilities window.
          7. Select Reinstall Lion/Mountain Lion and click on the Install button.
          8. Upon completion shutdown the computer.

Db in External hard disk.Will it impact the performance.

I need to create a db in external harddisk connected to the server since we ran out of space.
How much will it impact the performance

It depends on the transfer rate of your external disk.
For example, a normal
Firewire 1394 is at 50MBps
Latest ATA-133 is at 133MBps
Ultra320 SCSI is at 320Mps

If I subscribe to iTunes Match and later don't renew, will that impact the songs I've stored on my PC or phone or only the central storage in iCloud?

If I subscribe to iTunes Match and later don't renew, will that impact my access to music I have stored on my devices or will it only end my access to the central storage in iCloud? Thank you!

It won't delete anything in your iTunes library on your computer but you would lose access to anything in your iTunes Match library that isn't stored in your iTunes library on your computer. You would obviously need to sync your music to your phone from your computer using iTunes again.

Unistalling Trial Office 2010 Pro - Will this impact activated version of Office 2010 Home & Student

I am running W7. There is an expired Trial Version of Office 2010 Professional on this PC. There is also an ACTIVATED license of Office 2010 Home & Student. If I open Word, select Help, and click the "Unistall" option, I
get a message that says each component is going to be removed. I have gone to the Control Panel, selected Change for H&S, did the Remove/Add option, and marked Access, Outlook & Publisher as "NOT" in the drop downs. Though
I would like to remove the Professional Trial version, NOT at the risk of losing the H&S activated copy. This is a new position, and I am not able to locate (yet) the PC's documentation (including supporting docs for all software applications,
etc.) I need to be certain removal of the Trial will not impact the H&S version. Any help is appreciated. Thank you.

Hi,
There is a risk in your scenario, different versions of Office have some common files and components, once uninstalling the trial version, it may impact your Home & Student version.
But per my knowledge, a repair of Office will fix the possible issues quickly, and this shouldn't impact the activation status either.
Anyway, for the best practice of doing this, I highly recommend you to contact the customer service for assistance. In this forum, we mainly discuss technical questions and feedbacks about Office products.
We can find the Global Customer Service phone numbers from this link below:
http://support.microsoft.com/gp/customer-service-phone-numbers/en-us
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]

How to make the SQVI through the linking of 4 tables

I have a document no.i.e.9300801724.
I am getting the Internal No ( DOCNO ) from J_1IPART2 by put the doc.no.9300801724,then,I am putting the Internal no. ( DOCNO ) into J_1IPART1 and get the output of Material Document (MBLNR).Third,I am using the table,SE16-MSEG,and getting the Purchase Order (EBELN ) by given the input of Material Document i.e. already got from J_1IPART1.Now,I want to make the SQVI of all these 3 tables with including a new table of BKPF sothat I could get document no. ( BELNR ) from BKPF.
Now,the summary are:-
1-J_1IPART2
Input-FAWREF Output-DOCNO
2-J_1IPART1
Input-DOCNO Output-MBLNR
3-MSEG
Input-MBLNR Output-EBELN
4-BKPF
Final output should be BELNR
Is it possible to get all the datas from making the SQVI of above 4 tables?
Regards
Pradeep Kumar Gupta

Hi,
This can be achived through info set query. Below are the steps to create the info set query.
1. first create SQ03 user group to which query will be assigned
2. create infoset SQ02 and select the table and fields required for the output but ensure that there should be common field in each table you are using. system will show you the graphical display of table linkages.
3. Assign usergroup to infoset
4. Create query using SQ01 system will prompt you to select the info set and user group created in the above steps to select.
5. Give the desired name in description and select the basic list icon to select the field that need to be displayed in the output.
Hope it is clear and useful
Regards,
JB

Have a problem where I'll occasionally shift my computer (i.e. physically move it, say from the coffee table to my lap on the couch) and it will freeze and the screen will turn into a bunch of horizontal multicolored lines (closer to 100 lines than 5). Us

Have a problem where I'll occasionally shift my computer (i.e. physically move it, say from the coffee table to my lap on the couch) and it will freeze and the screen will turn into a bunch of horizontal multicolored lines (closer to 100 lines than 5). Usually restarting (by holding the power button to turn it off) works. A few times that has resulted in the three beeps (RAM issue? -- I've since replaced my RAM [it *seemed* to stop it for a while, but maybe not]), but the second time it always works. Attempting to SSH into the computer during this state does not work. Please advise as to what to do/what reports I can run and post. I will take a pic next time it happens.
Here's this info:
Model Name:          MacBook Pro
Model Identifier:          MacBookPro7,1
Processor Name:          Intel Core 2 Duo
Processor Speed:          2.4 GHz
Number Of Processors:          1
Total Number Of Cores:          2
L2 Cache:          3 MB
Memory:          8 GB
Bus Speed:          1.07 GHz
Boot ROM Version:          MBP71.0039.B0B
OS 10.6.8

Sounds like a problem with your GPU. Do you have an external display you could connect your machine to in order to test this? If the external display renders the same way, then your GPU is damaged. If the external renders fine, then the CPU display is damaged.

Return goods will impact the Moving average price?

Hi,
When stock of a material is low,and we return the goods to our vendor from po(movement type 102), the Moving average price may change very large.for example, stock:11 PC, Moving average price:1;return qty(with po 102):10PC,return price:0.5,then the Moving average price bacome to 6. I went movement type 102 can't impact the Moving average price, is it possible?
Thanks.

Hi,
This is not possible. As the name indicates, it is the Moving Average Price. When you receive goods / return goods, the system will take it into accoutn & change the MAP accordingly.
Regards,
Prashant Kolhatkar

Which table will give me the serial numbers per each delivery?

Which table will give me the serial numbers per each delivery?

Hi,
Table:
SER01 -> provide links between delivery and serial number object.
You can select by LIEF_NR = 'delivery number'.
OBJK -> content of serial numbers
You can select by OBKNR = 'SER01-OBKNR'.
Further more:
You can check in SE11 with name "SER0*". Then you can see a list of tables which contains link between serial number to other document.
SER01 -> Delivery
SER02 -> Maint.Contract (SD Order)
SER03 -> Goods Movements
SER04 -> Inspection Lot
SER05 -> PP Order
SER06 -> Handling Unit-Content
SER07 -> Physical Inventory
SER08 -> Purchase Order Item Serial Numbers
Regards,
Harry

[svn:osmf:] 15195: 1. Ensure that fragment ID will not exceed the total number of fragments as indicated by the segment run table .

Revision: 15195
Revision: 15195
Author:   [email protected]
Date:     2010-04-01 17:51:23 -0700 (Thu, 01 Apr 2010)
Log Message:
1. Ensure that fragment ID will not exceed the total number of fragments as indicated by the segment run table.
2. Fix bug FM-574, FM-586 and FM-614
Ticket Links:
    http://bugs.adobe.com/jira/browse/FM-574
    http://bugs.adobe.com/jira/browse/FM-586
    http://bugs.adobe.com/jira/browse/FM-614
Modified Paths:
    osmf/trunk/framework/OSMF/org/osmf/events/HTTPStreamingFileHandlerEvent.as
    osmf/trunk/framework/OSMF/org/osmf/net/httpstreaming/HTTPNetStream.as
    osmf/trunk/framework/OSMF/org/osmf/net/httpstreaming/HTTPStreamingNetLoader.as
    osmf/trunk/framework/OSMF/org/osmf/net/httpstreaming/f4f/AdobeBootstrapBox.as
    osmf/trunk/framework/OSMF/org/osmf/net/httpstreaming/f4f/AdobeFragmentRunTable.as
    osmf/trunk/framework/OSMF/org/osmf/net/httpstreaming/f4f/BoxParser.as
    osmf/trunk/framework/OSMF/org/osmf/net/httpstreaming/f4f/HTTPStreamingF4FFileHandler.as
    osmf/trunk/framework/OSMF/org/osmf/net/httpstreaming/f4f/HTTPStreamingF4FIndexHandler.as
    osmf/trunk/framework/OSMF/org/osmf/net/httpstreaming/flv/FLVTagAudio.as
    osmf/trunk/framework/OSMF/org/osmf/net/httpstreaming/flv/FLVTagVideo.as
    osmf/trunk/framework/OSMFTest/org/osmf/OSMFTests.as
    osmf/trunk/framework/OSMFTest/org/osmf/net/httpstreaming/flv/FLVTestHelper.as
    osmf/trunk/framework/OSMFTest/org/osmf/net/httpstreaming/flv/TestFLVTagAudio.as
Added Paths:
    osmf/trunk/framework/OSMFTest/org/osmf/net/httpstreaming/flv/TestFLVTagScriptDataObject.a s
    osmf/trunk/framework/OSMFTest/org/osmf/net/httpstreaming/flv/TestFLVTagVideo.as

Revision: 15195
Revision: 15195
Author:   [email protected]
Date:     2010-04-01 17:51:23 -0700 (Thu, 01 Apr 2010)
Log Message:
1. Ensure that fragment ID will not exceed the total number of fragments as indicated by the segment run table.
2. Fix bug FM-574, FM-586 and FM-614
Ticket Links:
    http://bugs.adobe.com/jira/browse/FM-574
    http://bugs.adobe.com/jira/browse/FM-586
    http://bugs.adobe.com/jira/browse/FM-614
Modified Paths:
    osmf/trunk/framework/OSMF/org/osmf/events/HTTPStreamingFileHandlerEvent.as
    osmf/trunk/framework/OSMF/org/osmf/net/httpstreaming/HTTPNetStream.as
    osmf/trunk/framework/OSMF/org/osmf/net/httpstreaming/HTTPStreamingNetLoader.as
    osmf/trunk/framework/OSMF/org/osmf/net/httpstreaming/f4f/AdobeBootstrapBox.as
    osmf/trunk/framework/OSMF/org/osmf/net/httpstreaming/f4f/AdobeFragmentRunTable.as
    osmf/trunk/framework/OSMF/org/osmf/net/httpstreaming/f4f/BoxParser.as
    osmf/trunk/framework/OSMF/org/osmf/net/httpstreaming/f4f/HTTPStreamingF4FFileHandler.as
    osmf/trunk/framework/OSMF/org/osmf/net/httpstreaming/f4f/HTTPStreamingF4FIndexHandler.as
    osmf/trunk/framework/OSMF/org/osmf/net/httpstreaming/flv/FLVTagAudio.as
    osmf/trunk/framework/OSMF/org/osmf/net/httpstreaming/flv/FLVTagVideo.as
    osmf/trunk/framework/OSMFTest/org/osmf/OSMFTests.as
    osmf/trunk/framework/OSMFTest/org/osmf/net/httpstreaming/flv/FLVTestHelper.as
    osmf/trunk/framework/OSMFTest/org/osmf/net/httpstreaming/flv/TestFLVTagAudio.as
Added Paths:
    osmf/trunk/framework/OSMFTest/org/osmf/net/httpstreaming/flv/TestFLVTagScriptDataObject.a s
    osmf/trunk/framework/OSMFTest/org/osmf/net/httpstreaming/flv/TestFLVTagVideo.as

How to choose the partition in oracle tables?

Dear all,
i m in need to create the partitions on prod.db tables since i m not aware of creating partitions?i just go through some theroy concepts and understood the range and list partitions (i.e)Range is normally used for values less than like jan,feb,march or values less than 50,000 values less than 1,00,000 like that each partition is having separate tablespaces to increase the performance. and for list is used to denoting the directions like west,east,north,south like that.
Now what i want to know is ?
1.)when will i can go ahead with partitions?
2.)before creating partitions is it advise to create index or not needed?
3.)if i started to create partition what is the leading column have to create partition and which partition has to choose?
pls let me know and pardon me if i did any mistakes.
thanks in advance..

I had to research on same topic. One of my teammates suggested few points that might help you also.
Advantages of partitioning:
1) Partitioning enables data management operations such data loads, index creation and rebuilding, and backup/recovery at the partition level, rather than on the entire table. This results in significantly reduced times for these operations.
2) Partitioning improves query performance. In some cases, the results of a query can be achieved by accessing a subset of partitions, rather than the entire table. Parallel queries/DML and Partition-wise Joins are also got benefited much.
3) Partitioning increases the availability of mission-critical databases if critical tables and indexes are divided into partitions to reduce the maintenance windows, recovery times, and impact of failures. (Each partition can have separate physical attributes such as pctfree, pctused, and tablespaces.)
Partitioning can be implemented without requiring any modifications to your applications. For example, you could convert a nonpartitioned table to a partitioned table without needing to modify any of the SELECT statements or DML statements which access that table. You do not need to rewrite your application code to take advantage of partitioning.
Disadvantages of partitioning:-
1) Advantages of partition nullified when you use bind variables.
Additional administration tasks to manage partitions viz. If situation arises for rebuilding of index then rebuilding should to be done for each individual partition.
2) Need more space to implement partitioning objects.
3) More time for some tasks, such as create non-partitioning indexes, collection of “global" statistics (dbms_stat’s granularity parameter to be set to GLOBAL. if sub partition are used then we have to set it to ALL).
4) Partition would implies a modification (of explain plan) for ALL the queries against the partitioned tables. So, if some queries use the choosing partition key and may greatly improve, some other queries not use the partition key and are dramatically bad impact by the partitioning.
5) To get the full advantage of partitioning (partition pruning, partition-wise joins, and so on), you must use the Cost Based Optimizer (CBO). If you use the RBO, and a table in the query is partitioned, Oracle kicks in the CBO while optimizing it. But because the statistics are not present, the CBO makes up the statistics, and this could lead to severely expensive optimization plans and extremely poor performance.
Message was edited by:
Abou

What's the meaning of Stats Tables?

Hi,
I'm trying to use the DBMS_STATS for gathering statistics.
I've launched the following:
BEGIN
dbms_stats.create_stat_table (ownname=>'MYOWNER',stattab=>'STAT_TAB');
dbms_stats.gather_table_stats(ownname=>'MYOWNER',tabname=>'MYTABLE',stattab=>'STAT_TAB');
END;
and when I go and watch the STAT_TAB table I find it's been created with this description:
SQL> desc STAT_TAB
Name                                      Null?    Type
STATID                                             VARCHAR2(30)
TYPE                                               CHAR(1)
VERSION                                            NUMBER
FLAGS                                              NUMBER
C1                                                 VARCHAR2(30)
C2                                                 VARCHAR2(30)
C3                                                 VARCHAR2(30)
C4                                                 VARCHAR2(30)
C5                                                 VARCHAR2(30)
N1                                                 NUMBER
N2                                                 NUMBER
N3                                                 NUMBER
N4                                                 NUMBER
N5                                                 NUMBER
N6                                                 NUMBER
N7                                                 NUMBER
N8                                                 NUMBER
N9                                                 NUMBER
N10                                                NUMBER
N11                                                NUMBER
N12                                                NUMBER
D1                                                 DATE
R1                                                 RAW(32)
R2                                                 RAW(32)
CH1                                                VARCHAR2(1000)
How can I undestand the meaning of the columns? I can't get the meaning of the names Oracle has assigned by default, I suppose. My version is Oracle 8.1.7.
Thanks

I think the analyze command was used in 8.1.7, but I can't say that I've used it. You should be using DBMS_STATS, and the stat table will contain information regarding the stats that are collected. So the stats table will hold values like the number of rows, number of distinct rows, min value, max value, etc about each table that you gather stats on. It also depends on the settings you use, like if you have histograms on.
In 10G, the defaults for DBMS_STATS have changed so be careful with that. Some info about it here:
http://www.ora00600.com/scripts/statistics/gathering_statistics.html

How to Fix the 1st row in Table

How to Fix the 1st row in Table
In EP, one of the page we are getting out put in the table format. It's working fine, but as per the new requirement we have to fix (freeze) the first row of the table. (.i.e. whenever I click the page down button first row should be visible in the table). Can you help regarding the above issue?
For Example: in Table having 6 rows. In 1st row display Year Month and 2,3,4---etc Rows will display Quantity. Click on Page down Button in Table we are able to staring 2row. First was a movie up. So End user canu2019t find which year/moth under the Quantity is available.
So I have to fix in 1st row. Click on page down button table 1st row is fixed but comes to another Quantity Records.
It is Possible in Table? If possible please tell me.
Regards
Vijay Kalluri

Hi KalluriVijay
I don't think there is direct availabe method available to fix the row. However, there are two ways using which you can achieve the requirement:
To go ahead with the custom table. This way you can set your own properties for the table. However, this may impact performance handling large data.
Second option is to use other features of NW04s (Not available in NW04) like Table Popins using which you can achieve something similar.
For Table Popins refer [TablePopin|http://help.sap.com/saphelp_nw70/helpdata/EN/23/5e9041d3c72e7be10000000a1550b0/frameset.htm]
Hope this helps.
Regards
Abhinav Sharma

How to dynamically display the data from a table base on row selection of another table in ADF

Hi ,
I have a requirement in ADF. I need to change the data of a table based on row selection of another Table . Both the table have a Parent Child relationship between them. They have a common attribute say department_id.
                                                                                     For this I created bind variable in view object of employees table and wrote a where clause in the sql query using that bind variable. Then I created method for selection listener of department Table in java bean.
My method is following
    public void onrowselection(SelectionEvent selectionEvent) {
        RichTable richTable = (RichTable)selectionEvent.getSource();
                        CollectionModel tableModel = (CollectionModel)richTable.getValue();
                        JUCtrlHierBinding adfTableBinding = (JUCtrlHierBinding)tableModel.getWrappedData();
                        Object selectedRowData = richTable.getSelectedRowData();
                        JUCtrlHierNodeBinding nodeBinding = (JUCtrlHierNodeBinding)selectedRowData;
                oracle.jbo.domain.Number newVal = (oracle.jbo.domain.Number) nodeBinding.getAttribute("DepartmentId");
                Number pallet = newVal.bigDecimalValue();
                System.out.println("Selected values " + pallet);
        BindingContext bindingctx = BindingContext.getCurrent();
                      BindingContainer bindings = bindingctx.getCurrentBindingsEntry();
                      DCBindingContainer bindingsImpl = (DCBindingContainer) bindings;
              DCIteratorBinding dciter = bindingsImpl.findIteratorBinding("EmployeesView1Iterator");//access the iterator by its ID value in the PageDef file
                      ViewObject vo =dciter.getViewObject();
                      vo.setNamedWhereClauseParam("DepartmentId", pallet);//enter your value
                      vo.executeQuery();
It is printing the selected value of department id from department table in the log. But it is not able to pass the value to employees view. It is showing the following error in the log
"Definition DepartmentId of type Variable is not found in EmployeesView1."
I will be very thankful if someone helps me to solve this errror or is there any other way to achieve the same requirement.
Thanks
Nilesh

Note quite sure why you simply wont create a viewlink for the viewobject the tables are based on..
The viewlink attribute will be based on the departmentId and it's a simple master detail relationship which automatically uses ppr.
However, if both tables are on the same page; using your hack about;
On the underlying viewobject, define a viewcriteria e.g. "listById" and set your bind variable here.
I would bind table two to a RichTable component:
RichTable t2;
public void onrowselection(SelectionEvent selectionEvent) {
        RichTable richTable = (RichTable)selectionEvent.getSource();
                        CollectionModel tableModel = (CollectionModel)richTable.getValue();
                        JUCtrlHierBinding adfTableBinding = (JUCtrlHierBinding)tableModel.getWrappedData();
                        Object selectedRowData = richTable.getSelectedRowData();
                        JUCtrlHierNodeBinding nodeBinding = (JUCtrlHierNodeBinding)selectedRowData;
                oracle.jbo.domain.Number newVal = (oracle.jbo.domain.Number) nodeBinding.getAttribute("DepartmentId");
                Number pallet = newVal.bigDecimalValue();
                System.out.println("Selected values " + pallet);
               refreshTable2(pallet);
        BindingContext bindingctx = BindingContext.getCurrent();
                      BindingContainer bindings = bindingctx.getCurrentBindingsEntry();
                      DCBindingContainer bindingsImpl = (DCBindingContainer) bindings;
              DCIteratorBinding dciter = bindingsImpl.findIteratorBinding("EmployeesView1Iterator");//access the iterator by its ID value in the PageDef file
                      ViewObject vo =dciter.getViewObject();
                      vo.setNamedWhereClauseParam("DepartmentId", pallet);//enter your value
                      vo.executeQuery();
private void refreshTable2(Number pallet){
RichTable x=getT2();
CollectionModel cm=(CollectionModel)x.getValue();
JUCtrlHierBinding jcb=(JUCtrlHierBinding)cm.getWrappedData();
BindingContainer bindings = bindingctx.getCurrentBindingsEntry();
DCBindingContainer bindingsImpl = (DCBindingContainer) bindings;
DCIteratorBinding dciter = bindingsImpl.findIteratorBinding(jcb.getName()+"Iterator");
ViewObject vo =dciter.getViewObject();
ViewCriteriaManager vcm=vo.getViewCriteriaManager();
ViewCriteria vc=vcm.getViewCriteria("listById");
vo.applyViewCriteria(vc);
vo.setNamedWhereClauseParam("DepartmentId",pallet);
vo.executeQuery();
AdfFacesContext.getCurrentInstance().addPartialTarget(getT2());

Not saving the data in two tables

Hello,
its my production problem, i have an update form where you can update the records and these
records will sit in the temp tables until the final approval from the supervisor.
In this update form i have two table where i am saving the data one is dup_emp to save the
officer data and another is the dup_address to save the officer where he worked data.
in this form address form is pop up screen where you can update and gets back to the original
form where you can see all the other fields. my problem is if a user hit the cancel button on
address form example the user doesnt want to update any information on that screen so user
cancel that screen, and comes to the other screen where the user makes the changes to the
appropriate fields and hits the SAVE button. in this case its saving only to the dup_emp table
data not the address data from the address form to dup_address table for the same record.
if the user cancels in both the screens cancel button it should delete the record from both the
tables but cancel in form and saves in another form it should save the record in both the
tables.
here is my code from both cancel buttons from both the forms.
this is code is from address form cancel button.
delete from dup_address
where address_id=:address_id
and parent_table_name='emp';
commit;
CLEAR_BLOCK;
go_block('DUP_EMP');
This code is from dup form of the cancel button
declare
temp_address_id varchar2 (12);
begin
delete from dup_emp
where secondemp_id =:dup_emp.secondemp_id;
delete from dup_address
where parent_t_id=:global.secondemp
and parent_table_name='emp';
commit;
clear_block;
go_block('secondaryemp');
END;

Hi,
As Aravind mentioned, it's nothing related to workflow. You have to find a BADI in tcode PA30 that could be used after the infotype is updated. So, you can use FM SAVE_TEXT.
Regards,

Will DBMS_STATS impact the NCHAR in a table ?

Similar Messages

Maybe you are looking for