Will director 10 MX 2004 work with vista

hello;
I am very excited about director 11 - but I am currently
using ( happily ) D10; I am about to get a new pc with vista - will
director 10 MX 2004 work on a vista?
thanks
dsdsdsdsd

I have a simple presentation with a quicktime loop at the
beginning. It
crashes after about 2 hours if I leave looping. I would be
reluctant to use
it on a kiosk, and cross my fingers if I have to use that
laptop for a
presentation. It seems to be a combination of h264, Vista and
video card on
the particular laptop. But I haven't had time to try
installing xp on the
same laptop to figure out for sure which one to blame.
Timm
"dsdsdsdsd" <[email protected]> wrote in
message
news:fpie5p$klg$[email protected]..
> hello;
>
> I am very excited about director 11 - but I am currently
using ( happily )
> D10; I am about to get a new pc with vista - will
director 10 MX 2004 work
> on a vista?
>
> thanks
> dsdsdsdsd

Similar Messages

Will Creative Cloud programs work with Windows Vista?

The specs say works with XP or Windows 7. Does this mean they do NOT work with Vista?

TimCarey72 wrote:
That's crazy Why support XP And not vista
Presumably because so many people still use XP.
That said, Photoshop CS6 will be the last version to support XP.
http://blogs.adobe.com/photoshopdotcom/2012/09/photoshop-and-windows-xp.html

Will the Linksys WRT160N work with windows vista at all?

Will the Linksys WRT160N work with windows vista at all?
Some one please clear this up for me, it could be answered in the simplestterms from the English Language of course.
I've recently purchased the Linksys WRT160N however after purchase "of course"I manage to find reviews stating that the router will not work with the WindowsVista Premium, or windows Vista for that matter.
E.g.(Comments like These 'which are not my own')----------
"When I tried it with a new computer running Vista 64, it would install but the Linksys System Advisor would not. After 1 chat and 4 phone calls with support the system will still not run."
"It is a good product with XP, but if you use Vista 64 good luck. After several hours of working to get it running my patience and options have run out."
"It has taken almost a week for us to figure out that the Linksys Router, WRT160N from Best Buy does not workwith Vista Premium. I looked on-line to Linksys Website and discovered that the router, WRT160N is notsupported for Vista users. .."
E.g. (CommentContradicting to what has been said above)------
"Bought this to replace my outdated Linksys (new Vista laptop) and was blown away. Thisthing practically set itself up. It replaced the wired router and wireless routers I was using, asthe signal strength is awesome. I'm still pulling over 5meg ... "
So I guess one could see why I am confused, based on the 2 sidedcontradictions pertaining to this router actually working with windows vista ornot.
So can someone respond (preferable a Vista User) and tell me the truth as of towhat this router can an cannot do in terms of Vista? Thanks

It should work with vista without any issues if you are running any software on the computers (64 bit) from linksys it may not work but if you will connect that computer with an ethernet to the router it should work fine.

Adobe Photoshop 6.0 - will it work with Vista?

Hey there -
I bought Photoshop, Illustrator, InDesign, etc in 2001 (I don't know if that is relevant or not), and have Photoshop 6.0, for example.
My laptop with Windows XP is dying very soon. I may be forced to get a computer that has Vista.
Will my software work with Vista?
I appreciate you help!
Alex

I sent myself an email back when I upgraded to Vista, I just looked back and found the email. It had some links in it (which are no longer good), but there was some useful information and troubleshooting guides on there on how to get various older versions to work on Vista machines. I was thinking there was a "trick" on there about setting the date back on the computer or something while reinstalling Illustrator in order to get it to work. I have AI 10 at home as well, but I have not yet installed it on the Vista Machine as I got CS3 and use it on my XP machine just fine.
If I were you I would hold off as long as you can, like Marian said, and maybe by then CS5 will be out too.

I purchased photoshop CS5 for my windows vista operating system. I purchased a canon 7 D some yrs ago no problem. I purchased canon 7D mk 11 in december 2014. The supplied software will not work with vista. Photoshop CS5 will not accept canon7D mk11. Can

I purchased Photoshop CS5 for my windows vista operating system. I purchased a canon 7 D some yrs ago no problem. I purchased canon 7D mk 11 in December 2014. The supplied software will not work with vista. Photoshop CS5 will not accept canon7D mk11. Can someone please tell me how i process canon 7D mk11 photos ?????. (is it possible to bypass camera raw and open the photo straight into CS5 without using camera raw first. if so how do i do that. if not how do i process pictures).
Thank you.
Brian in the UK.

Photoshop by itself cannot process raw image data. That is why the Camera Raw plug-in was developed. You could try the DNG converter and convert your images to the DNG format and then the Camera Raw that you have would be able to open them. I can't recommend Lightroom because you are using Vista, and Lightroom 5 cannot be used with that operating system. It may be time for you to get a new computer and upgrade your software.

Will any Creative MP3/Video Players Work With Vista Ultimate/Yahoo Music Out of the B

i've had a heck of a time getting my zen touch to work with my new vista ultimate dell pc, almost ready to give up. why i'm even thinking of getting another creative device given the above i'm not sure, but if i was, do any of the current devices (20gb or greater, mostly for music but want video capabilities) work with vista and yahoo music correctly and without a huge amount of heartache? and if not, any other devices i should look at? i really like the yahoo music service so don't want to go the apple route. thx!

iTunes is only intended for iPods and iPhones. In recent releases, Apple has instituted changes that prevent it from being used with other devices, e.g. release 8.2.1 deliberately broke the ability to sync with the Palm Pre.
Since you will be using multiple platforms, make sure that all music that your rip or purchase is in MP3 format. Then your music can be used in iTunes, Creative, or any other player or program, without conversion or compatibility problems.
Per the problem with Zen and Vista, you may wish to try the question on a Zen discussion.

Itunes not working with Vista Home Premium 32-bit

Itumes 10.6.3 version will not work with Vista Home Premium. I have a 32-bit operating system. I'm not sure what to do next. It appears in trying to update it deleted the old itumes, as I can't find a copy of it when I search the computer.

Then I installed Quicktime on its own - still get the same error 'Quicktime has stopped working;
Okay. That will be the source of the iTunes problem. (Without a properly working QuickTime, iTunes won't work correctly.)
Checking on things that can cause QuickTime launch errors now.
Have you at any stage installed any Codec Packs, any copies of the programs QT Alternative, QT Lite or Storm Codec, or any media converter programs that can convert files into QuickTime readable formats?
(I'm checking on these things because depending on the versions of the programs/codec-packs, these can install earlier versions of QuickTime componentry on a PC, which can interfere with the running of a higher version of QuickTime.)

Making the WMB54G work with Vista (Service Pack 1) - it does work.

I posted this in response to a thread, thought it could use its own topic.
There is hope and potential success for Vista users!   I got the WMB54G 2 days ago. I spent 6 hours with it and nearly threw the product AND my computer out the window the first night. I scoured this forum for the past two days, and by putting pieces together from various threads, I'm now using the Music Bridge successfully with my 1 month old Dell XPS M1530 with Vista Home Ultimate with Service pack 1.  Once I had my gameplan, it worked perfectly the first time I tried the new approach. I will try to write a step by step process of what I did in the next few days but for now.....
1. Throw out the installation CD that comes with the music bridge (its useless for Vista).... I'm kidding, but you get the point.
2. You HAVE to dowload the Vista compatible installation utility and Firmware upgrade from the Linksys forum - I don't have the link right now, but its here in this forum.
3. Run the Vista driver setup to install the Musicbridge utility - the "Install utility" link at the bottom of the setup screen, but DO NOT try to configure the router since you'll just have to do it again later.
4. Run the firmware upgrade for the router (it behaves exactly like the setup utility, but instead of configuring the hardware for use, it upgrades the fimware)
5. Run the Vista driver setup to configure the router (only after the firmware upgrade).   I didn't have to do anything outside of the auto setup. i'm using a Linksys wireless G router as well, and it connected with 64 Bit WEP encryption no problem once i entered my encryption passphrase.
6. Open up MSCONFIG and disable the CMFLYWAVE Application on Startup
7. In your Program Files directory, find \Linksys\wmb54g\wmb54g.exe, \Linksys\wmb54g\driver\cmas2ds.exe, and \Linksys\wmb54g\driver\cmflywav.exe - For all three files, right click and go to Properties\compatability.   Check the "Run this program in compatability mode for:"   pick XP with SP 2.
THANK YOU SO MUCH TO THE PEOPLE WHO POSTED THAT LAST BIT!!!!
8. I'd suggest restarting the computer now.
9. You might get a "WMB54G.exe has stopped running error" on restart... that's ok
10. Start the following files in this order:
cmas2ds.exe
cmflywav.exe
wmb54g.exe
11. The utility should start, and then you can connect to the bridge via the system tray icon. - you might have to also set the default audio device to the Music Bridge by right clicking your system tray speaker icon
12. Uncheck the "Start the Music Bridge when I start Windows" option in the utility screen - and execute the three files in step 10 each time you restart.
I hope this works for you.
Solved!
Go to Solution.

I finally got my WMB54G to work with Vista SR1. It took me 4 hours of struggling to figure it out though.
What I did was:
1. Download the latest utility and firmware from the linksys support site.
2. To set up the device, preferably use http://192.168.1.210. There are http setup instructions on the linksys customer service site. Alternately, you can use the setup wizard on the CD but I would recommend avoiding it if you can. If you do use the setup CD and it installs the WMB54G utility, promptly uninstall the utility afterwords and restart the computer.
3. Update the firmware to v.2.18 by using http://192.168.1.210 and going to the HELP tab
4. Install the latest utility from the support site but do not run the main setup. Simply run setup.exe in the utility folder AND GIVE IT PLENTY OF TIME. Walk Away and let the installer finish and close. Then do the thing people discovered -- edit the properties of C:\Program Files\Linksys\WMB54G.exe and make sure it is set for running in XP compatability mode.
5. Restart the computer
Mine started working fine after I did all of this -- the WMB54G came up automatically and found the device. Keep in mind I do not have WEP or anything -- just unsecured wireless.
Good luck.
Mike
Message Edited by jmfife on 01-17-2009 10:51 AM
Message Edited by jmfife on 01-17-2009 10:54 AM
(Mod Note: Edited due to non-compliance of forum guidelines.)
Message Edited by giantherockstar on 01-17-2009 11:05 AM

Does Microsoft office 2004 work with lion?

Does Microsoft Office 2004 work with the new Lion OS?

Ptit-Loup wrote:
Angry at Microsoft, and now angry at Apple...
Microsoft killed macros compatibility when upgrading from Excel 2004.
Apple kills OS compatibility with Office 2004 when upgrading to Lion.
I did not upgrade from Excel 2004, since I spent a lot of time and energy to develop a large number of functions using Excel macros.
I will not upgrade from Snow Leopard.
What else ?
I had the intention to change my 4-year-old 17" Macbook pro, not compatible with Lion, to a newer one. I had... There is no further reason to do that.
Apple, now loosing old supporters and customers ? Or am I getting too old ?
A 4 year old Macbook Pro should run Lion. Unless its a CoreDue and not a Core2Duo. Remember that PPC computers can not even run Snow Leopard. This was when Apple announced that support for PPC programs would be phased out. Office 2004 is almost 8 years old now. Twice as old as your computer you say needs to be replaced. I can't believe people rush in to install a new system without doing a little bit of research, and the dropping of Rosetta to run old PPC programs was well advertised if you read up on Lion, as was the introduction of Mission Control and Versions. I even read up about them, and I'm not a professional like some who come here. May pay to remember to research in future releases.
Good Luck

Audigy 2 ZS Platunum Pro (working with vista x64 beta

Just posting to let all you people know the Audigy 2 ZS does actualy work with vista beta 2 64bit the drivers them self do not work nor do any of the others but if you play around with them for a few hours (not using this work around which sucks) you can get them to work.
All I used was the drivers for XP 64bit and the Beta drivers with the XP drivers in first then uninstalled then put the new drivers in after.
Problem is for now they only work in stereo, though the breakout box does work with the voilume and such.
So dont give up sound will come from your audigy 2 zs just not very easly :P
EDIT: Well it seems that most people know this now, anyone got a sound way to get 5. working?Message Edited by Cafuddled on 06--2006 :2 AM

I would like to add my two cents to this. I had an RM-500 which stopped working after a while. My MCE IR receiver seemed to pick up an infra-red signal from the thing but the dri've bay didn't respond.
I then tried an older RM-900 from an old Audigy installation and that worked perfectly with the dri've bay. So in my case, the RM-500 was dead ( the battery was ok ).

Will my ipod classic work with windows 8

I am finally updating my Windows XP desktop to a Windows 8 laptop. Will my ipod classic work with Windows 8? I've seen a ton of problems from other users with regard to compatibility.

Do yourself a big favor. Switch to Windows 7. (Or buy a Mac.)

Will a WRE54G repeater work with a WRT160N router?

I'm using a WRT160N router and only getting 2 bars out of 5; fair signal. A friend has offered to sell me a WRE54G range expander. Will a G repeater work with an N router?

Yes,the WRE54G should work with WRT160N...You need to match all the wireless settings of the router to the range expander and it should work then.

HT4059 Will iBook Author books work with an iPad 1?

Will iBook Author books work with an iPad 1?

Look at these.
http://bluemic.com/snowball/
http://www.lifeisaprayer.com/articles/photography/iphone-4-ipad-external-mic-aud io-input
 Cheers, Tom

Will the Cinema Display work with an older MacBook Air?

My wife has an older MacBook Air (circa late 2009) with one USB 2.0 port and one Mini Display port. Will the Cinema display work with this model Air?

It looks to me like the cinema display is a DVI connection. If you have a MiniDisplay port to DVI adapter that connected the MBpro to the display then you have everything you need. (plus a DVI cable). The MDP adapter plugs into the Thunderbolt port of the MBair.

Will Microsoft Office 2001 work with the Lion upgrade?

Will Microsoft Office 2001 work with the Lion upgrade?
Will one have to reinstall after the Lion upgrade?

Office 2001 will not work with Lion. That is a Power PC App which is no longer supprted in Lion. You should upgrade to Office 2011, Apple iWork, or Open Office.

Will director 10 MX 2004 work with vista

Similar Messages

Maybe you are looking for