Will display usps labels in paypal but wont display international labels

when I use usps labels in paypal the domestic labels display and I have no problems, but when I ship international labels it wont display its just blank, I can do both in safari but now paypal dose not support safari and I'm always getting errors, I want to continue using firefox but I cant figure out how to get the international labels to display

I think I've had similar stuff happen to me before. When Java updates it doesn't get rid of the old version; it just installs the newer version. There can sometimes be problems with Java using an older version and not the newest version, or there can be problems with Java getting mixed up due to the different versions; I think the latter problem is the one you are experiencing.
Try going to wherever you have Java installed (c:/program files/java or wherever) and deleting the older version(s).

Similar Messages

Phone displays usb and itunes logo but wont restore

my daughters iphone has stopped working and has a usb and itunes displayed on phone, and when i plug it in to laptop it says it has to be restored so i did this 4 times but keep getting the error 1002 come up,i have clicked around itunes for help but just end up going around in circles as it gives no advise as to what to do. can anyone help please.
the phone is a 3gs and is a reconditioned phone it has worked ok for a month but now has this problem and wont work at all.

iTunes: Specific update-and-restore error messages and advanced troubleshooting

My music on pc suite loads but wont display the sc...

HI All
Really need some help here.
For the past 2 months I have not been able to open my music manager. I click on it. The little screen pops up showing it is loading and then nothing happens.
I tried upgrading to the latest Nokia PC Suite but that didnt help either. What could be doing this?
Thanks
David

Hi davemish,
Could you please provide more details about your PC and its version, so that your post will be replied by exprets in this forum ???

Iphone will send email on pop server but wont receive

I set up my iphone via a pop switch as we do not have activesync so we cannot do exchange. So I did other and I am using POP. I have been able to set it up so I can send email but I cannot receive. What would be the cause and how can I fix?

as in when i delete something from my phone i want it to be deleted from the actual account and vice versa.
and i will try that and see what happens.

My ipod will only charge on my computer but wont charge

with wall charger or docking station

Does the wall charger work for other devices? Maybe it is bad.
Does them dock manufacturer say it will work with your model iPod and its iOS?
Is the iPod fully seated in the dock?
Does music play through the dock?
Did it work with the dock before?

Officejet 8500 a909g will scan but wont even try to pirnt (wirelessly)

I have an Officejet 8500 Pro a909g, downloaded latest software package from hp for windows 7. Will scan but wont print, immediatleyl displays error when I try to send test print. Disabled my Norton anti-virus and Norton firewall but stil wont print. Wants to run printer troubleshooter which says there is nothing wrong.

Try restarting the printer, router and PC. If that does not do it, download and run this utility: http://h20180.www2.hp.com/apps/Nav?h_pagetype=s-926&h_lang=en&h_client=s-h-e17-1&h_keyword=dg-NDU&ju...
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

I have a macbook 13"screen purchased in 2007; I want to hook it up to my HDTV; I purchased a mini display port to hdmi adaptor but it does not fit. what kind of adaptor will work for this model?

I have a Macbook, 13" screen, purchased in 2007. I want to hook it up to my HDTV; I purchased a mini display port to hdmi adapter but it does not fit. Any suggestions?

If you connect yourMacBook using a MiniDVI/HDMI adapter you will need to use external speakers for audio since the pre-2010 MacBooks will only send video through the MiniDVI or MiniDisplay Port . The MiniDVI/HDMI doesn't carry audio and there's no audio plugs on the TV to work with HDMI since it's expecting audio with the HDMI.
If your TV has a DVI input plug you can use a MiniDisplayPort/DVI adapter. Then a DVI cable to the DVI input plug on the TV. The TV will have RCA audio plugs for use with the DVI. Plus DVI gives a sharper image than HDMI.

TS1587 I tried everything, except for reinstalling the SO-DIMM memory modules. Still, my iMac will not wake up. Turning it on you can hear the fan run, but the display stays dark. Any ideas what to do? Thanks Maja

My iMac won't start up, or wake from sleep. I've tried everything, except for reinstalling the SO-DIMM memory modules. Still, my iMac will not wake up. Turning it on, you can hear the fan run, but the display stays dark. Any ideas what to do? Thanks!

Mac doesn't boot
Can you hear the fans and hard drive and see the white boot screen? Flashing question mark? The circle just runs and nothing happens? Only black screen and nothing else? These can be very helpful to diagnose the source of the problem. [1]
Flashing question mark [2]: This is usually a sign of a failed hard drive. This indicates that boot up volume can not be found.
Black screen: This is usually a sign of a failed logic board. There is no single reason for this and this may be caused by failed GPU, screen, CPU or RAM.
Circle of death/no circle/blue screen: This is usually a sign of a hard drive failure. This may NOT be a dead hard drive, just broken permissions or something
Gray screen/Apple logo/spinning gear or globe/prohibitory sign/folder with flashing question mark [3]: This could be a sign of faulty hardware but more likely a software issue, i.e. broken permissions, failed software update, etc.
[edit]
What to do
First, hold down the option key (also known as the alt key) just after you've pressed the power button. This should show all the available options to boot from, so if you have Windows installed through Bootcamp or a disk in your SuperDrive, you should be able to see them along with your OS X drive/partition. Select the OS X partition with arrow keys and press enter. Startup key combinations
If that doesn't help continue doing the steps from below:
1. SMC reset [4]. Shut down and unplug all cables including power cord for at least 30 seconds and then plug in power cord and keyboard/mouse.
2. PRAM reset [5]. Hold down option, command, P and R while booting. Start it when you hear the sound and don't let go before it reboots.
3. Safe boot [6]. Hold down shift while booting to boot into safe mode. If this works, open Disk Utility from Utilities and repair your permissions and verify the disk
4. Hardware test [7]. Insert the install disk (disk 1 in Mac which shipped with OS X 10.5.4 or earlier, disk 2 if shipped with OS X 10.5.5 or newer) and hold down "D" before the grey boot screen opens. Follow on screen instructions
5. Boot from install disk. Boot from the disk that came with your Mac. Hold C while booting. Select Disk Utility from top bar and repair permissions and verify the disk. Reboot normally and see if it works now.
6. Boot from another Mac (Firewire target disk mode). Connect the machines with a Firewire cable. Power on your Mac and press T. Select the other Mac's hard drive. Download the current OS X combo update. Run the combo update installer and select the drive that won't boot as the destination.
7. "Repair" OS X. Boot from the install disk as in point 5. and reinstall OS X. This should NOT erase any data, just replaces the system files which may have caused your booting problem. Now install the latest combo update for OS X and repair permissions on your drive with Disk Utility.
7.1. Install OS X into an external hard drive and then boot from it [8] and try to copy your data from the hard drive before proceeding. If you have done a backup recently, you don't have to do this.
8. Restore OS X from Time Machine backup. Boot from the disk that came with your Mac and choose the Time Machine restore option. This step will lose any changes made since your last backup but the system and your data will be put back to exactly as it was on that date.
8.1 Reinstall OS X. Boot from the install disk as in point 5. and select Disk Utility again. Now erase the whole hard drive and install OS X again. If you had a Time Machine backup and step 7 worked you don't have to do this.

HT2801 my disk drive will start up when i plug it in, and runs for about 30 seconds, but wont get recognized in my computer. It used to show up in the finder but that doesnt happen anymore

my disk drive will start up when i plug it in, and runs for about 30 seconds, but wont get recognized in my computer. It used to show up in the finder but that doesnt happen anymore

If you go to Disk Utility, can you see the drive on the left hand side? If not, then the drive is dead. You'll have to buy a new drive.
Also, this forum is "Older Hardware". We specialise in hardware from the 1980s.

My iphone will charge in the wall, but wont charge on my computer, and itunes wont recognize it, how d i fix it?

My phone will charge in the wall, but wont charge with the usb in my computer. ive bought a new cord, so i know thats not it, but my computer wont recognize my phone, HELP!

See if placing the iPod in recovery mode will make the iPod visible in iTunes. If it does then restore the iPod via iTunes on your computer. For recovery mode see:
iPhone and iPod touch: Unable to update or restore

IPad will open but not display information entered on a form sent as a PDF.

iPad will open but not display information entered on a PDF file. Same file will open and display all information on my iMac. Anyone had this problem?

I think that you are trying to view a form fields PDF file and you cannot see the content that was filled in on those fields. Form fields will not show in the mail app or in iBooks. Download Adobe Reader for the iPad. It is free and it offers a lot of features for a free app. Save that PDF to Adobe Reader and see if the text in the fields appear.

Most times when I import photos from my desktop or dropbox to iPhoto, iPhoto will keep the title I created for the image as the display title under the image. but occasionally it displays the filename instead and I have to go back through and reenter

most times when I import photos from my desktop or dropbox to iPhoto, iPhoto will keep the title I created for the image as the display title under the image. but occasionally it displays the filename instead and I have to go back through and reenter the title in iPhoto. why the inconsistency? running OS 10.9.5 and using iPhoto 9.5.1

Try this: select one of the photos that are showing the wrong title and use the Photos ➙ Batch Change ➙ Title to File Name menu option.
See if that will put the name that you want under the thumbnail.

My phone will be plugged up and charging but it wont connect with iTunes.

my phone will be plugged up and charging but it wont connect with iTunes.

Put it in recovery mode, that should fix it!
http://support.apple.com/kb/HT1414
I Hope I Was Able To Help You Or Solve Your Question.
Simmm
3/12/2012
EDITED
Message was edited by: Simmm

I am trying to hide the Options menu in UserChrome.css but it is not working. Here is what I have tried menuitem[label="Options..."] {display:none !important;}

In the userChrome.css I have tried the following entry: #updateSeparator, #checkForUpdates {display: none !important;}
menuitem[label="Options..."] {display:none !important;}
menuitem[label="Add-ons"] {display:none !important;}
menuitem[label="Get Bookmark Add-ons"] {display:none !important;}
The other lines work, but the line to hide the Options menu does not. This in on Windows 32-bit XP sp3.

It is an ellipsis (…) and not three dots.
If there is an ID for a menu entry like in this case #menu_preferences then it is better to use that ID.
<pre><nowiki>#menu_preferences, #menu_openAddons, {display:none!important;}</nowiki></pre>
"Get Bookmark Add-ons" is a normal bookmark that you can remove via the right-click context menu or move elsewhere.

My images will not show in the Finder Pictures folders, but just display as jpeg thumbnails. I have to open each one to see what photo it is. This has just recently started to happen.

My images will not show in the Finder Pictures folders, but just display as jpeg thumbnails. I have to open each one to see what photo it is. This has just recently started to happen.

I made sure the 'Show Icon Preview' box was checked. This is about all I can do, really, Frank, as i don't know enough about the workings of these machines to start fiddling about.
Strangely the images show as previews in some folders, yet not in others, even though they come from the same sources (my camera and my phone).

Will display usps labels in paypal but wont display international labels

Similar Messages

Maybe you are looking for