Will DVD Studio Pro support dual layer media

I have a project that is 1 hour and 46 minutes long. DVD Studio Pro 2 has built the project but it reports that a 4.7 DVD will not hold the build. Other than the Data Meter, is there a way to find out how much the project is over 4.7? What are my options? Is it possible to lower the compression settings to get this to fit without sacrificing too much quality? Does DVD Studio Pro 2 support dual layer burning? Sorry about asking these questions, but I am on my laptop which does not have the program or help/manual and I would like to find out ASAP so I can order dual layer media if that will work.
How sketchy is playback of home burned dual media in ordinary DVD players?

You should be able to get your project on a DVD-5, you would need to adjust your encoding settings and depending on the footage you may not see a big hit (You can build the project to see how far over it actually is)
First if you have not made the audio AC3, do so, will save room
As to the video , take a look here for calculator
http://www.videohelp.com/calc.htm
Usually I tweak a bit lower than the calulator. For instance if it says an average rate of 5.2, set you average to 5, chances are you will not see the differene between 5 and 5.2 and can save you reencoding heartache/headache down the road. Max rates really should not be higher than 7.4 or so - do not set max video rates to 9.636 as shown in the calculator. In theory it works, in practice can cause playback issues.
How sketchy is playback of home burned dual media in ordinary DVD players?
+R DL works fairly well DVD SP 2 did not support DL burning if I recall correctly, but if you have Toast you can burn from there.

Similar Messages

DVD Studio Pro 4 Dual Layer Disc Question - Can Files Be Moved from Top to Bottom Layer?

HI Everyone -
I have authored a dual layer DVD for a feature film with lots of bonus material. I put the layer break in the least intrusive spot where the frame is already still and there is little sound. Layer switch is fine. DVD plays as it should with no problems other than the expected pause during the layer break.
I'd like to have the layer break at a point much earlier in the movie, where it actually goes to black and silence for a moment - a spot DVDSP4 won't let me assign a layer break marker to. I do understand why.
DVD Studio Pro has the movie on the bottom layer of the DVD, I assume because that is the first track I created.
At this point, is it at all possible to move the tracks around where the bonus features take up most of the bottom layer so the less of the movie is on the bottom layer and I can move that layer break up (without completely re-authoring)?
Thank you for your time.
Joe Grisaffi
Houston TX

The fun continues...
The DVD Drive on my 10.6 machine seems to no longer be working...
Maybe this caused/contributed to/resulted in the earlier problem?
Anyone else experiencing similar issues? All hard drives and firewire drives seem to be functioning normally at this time.
My 10.5 machine appears to be eating through the DVD writing process successfully... slowly, but successfully

Maximizing HD Video with iDVD/DVD Studio Pro and dual layer DVD

I have 30 minutes of edited home video from iMovie HD and I am trying to use iDVD to burn the project. I have a dual layer DVD+ disk and would like to maximize the quality of the project to 8 gigs. Each time I change the project info, etc. the project still is just 1 gig. Any suggestions, please....

iDVD produces NTSC/PAL videoDVDs within the specs given by the socalled Red Book Standards...- max bitrate is 8 - 9kB/sec... which is, in your case 30min=1GB
(but: iDVD "wastes" a lot of bandwidth for PCM audio....)
DVDSP/Compressor allows a manual setting of bitrates, so you can devide the max. rate wiser between audio and video... but some dvdplayers (esp. software ones in the PC world) don't handle such high bitrates...
as said above, no homebrewn HiDef DVD so far, lets see, what 10.5 and the new ProMacs will bring to us....

Will DVD studio Pro convert Real Media

I have some real media clips and I want to convert them and burn them to DVD. Will DVD studio Pro convert them. IF they will how long will it take for 50 mins of video. Thanks

To convert RealVideo you will need to download a shareware tool named ffmpegX located at http://www.ffmpegx.com
When you venture down this path get your favorite beverage, and make sure you have plenty of time to READ THE INSTRUCTIONS!
On the download page near the bottom you find will instructions and links that will eventually lead you to the libraries you need for RealVideo which have to be downloaded separately.
Once you d/l them, locate your ffmpegX support folder located at:
systemHD>Library>ApplicationSupport>ffmpegX
and install the libraries
You will then be able to convert RealVideo using the mencoder to something that's useable in DVDSP or FCP.
I have had extremely good results to date. Basically same old story... garbage in, garbage out. if the RealVideo is good or excellent quality you will get like results!
Hope this helps! Post back.
G5 Dual 2.7 Mac OS X (10.4.4)

Will DVD STUDIO PRO dvd's play on P.C.'s?

Will DVD STUDIO PRO created dvd's play on P.C.'s? If not how can I create projects that will play in DVD players on P.C.'s MAC's and in standard home DVD players?

In my experience (not big productions) all PC playback problems were related with the DVD playback software, and more specifically with customers trying to use Windows Media Player as DVD player.
Have you personnaly saw one of those machines? I mean, have you "see" by yourself a computer that can play comercial pressed DVDs and not your DVD-R discs?
You can ask to a confident customre with such problems to install the free and crossplataform VLC Player to check if he can play your disc using this software.
An after all your authoring/burning workflow can affect your discs, i.e. are you using labels? What brand of media are you using? What burning speed
are you using? . . . and so, and so.
Hope that helps !
Alberto

Will DVD Studio Pro 4 work on dual 1.25 G4?

I need to get a version of DVD Studio Pro to author DVDs but I know it requires 10.4 (or 10.3.9 but you can't buy that) to run. I'm reading all of these horrific posts about how 10.4 is mutilating computers and so forth so I'm a little nervous. I also notice it requires a particular graphics card which I don't think i have. I'm not doing HD so is this card really necessary?
Any help or advise would be greatly appreciated.
Rick

Tech specs at apple's site is best placed to start
http://www.apple.com/finalcutstudio/dvdstudiopro/specs.html

Will dvd studio pro solve my disc playback problems?

Hi folks-
I have to say I love my G5 and the very easy to use iDVD and Imovie apps. However I find that dvds I make will not play in many dvd players. This seems to be a known issue and I have tried various fixes without consistent results. Anyway, what I want to know, if anyone can tell me, is if upgrading to dvd studio pro will solve/help with this at all. As you all know it is very very disappointing to spend many hours and $$ creating a great video only to discover it is unplayable on random dvd players. It is also makes me look stupid, and I don't need any help in that regard.
Thanks for your attention.

Need more details. Do they freeze and stutter or not do anything at all in these players?
If they freeze and stutter, are you sticking on labels? If so, this is most likely your problems. If they do nothing at all it could be a number of issues such as: bad drive, cheap media, etc.
Dual G5, iMac G5, PowerBook G4, IBook G4, G3, 604e Mac OS X (10.3.4)

Will DVD Studio Pro 2 work with Quicktime 7.1.2?

Greetings all ~
Recently purchased a secondhand (and legal!) copy of DVD Studio Pro to run on my G4 iMac running OS 10.3.9. The primary purpose is to burn occasional DVDs of short movie files I'm creating which are visually simple, but have surround sound audio imported from Deck.
When I went to install DVDSP2, I moved too fast and took the manual's advice of updating to the latest version of QT - in this case QT 7.1.2. But the key for QT that came with DVDSP2 is, I discovered, for use with QT6. And as I've learned from other threads, QT 7.1.2 appears to be the only version of QT for which Apple has not made available an uninstaller allowing you to revert to an early version of QT.
From those threads, it appears that one answer is to backup and reinstall OS 10.3.9 with its earlier verison of QT. I'd much much much rather avoid this given all the software I'd need to reinstall.
It would be well worth it to me to pay the $30 to upgrade and get a key to QTPro 7.1.2 — if I knew that it would work with DVDSP2. But from another (unanswered) thread, it looks like there may be compatibility issues.
So ...does anyone know definitively whether or not DVDSP2 will run properly with QT7.1.2 on OS 10.3.9?
Thanks in advance for any help!
imac g4 Mac OS X (10.3.9) also run certain programs in OS 9.2.2. Run versions of ProTools on both systems, use Deck (for surro

Gary ~
Many thanks for this quick and helpful response. Unfortunately, that uninstaller doesn't seem to work with QT 7.1.2 ... it says it "will remove QuickTime 7.0.1" and when I try it on 7.1.2, which I now have, it tells me "You cannot install this software on this volume. This disk is dimmed because it does not contain an appropriate version of QuickTime."
Any other thoughts? Is my only option to reinstall 10.3.9 with its earlier version of QuckTime?
Thanks again ...
-D
imac g4 Mac OS X (10.3.9) also run certain programs in OS 9.2.2. Run versions of ProTools on both systems, use Deck (for surro

Will DVD Studio Pro 4.2.1 run on my 11,3 iMac if I upgrade to Mavericks?

Been holding off upgrading from 10.6 because of one app: DVD Studio Pro. I can't risk losing it. Will it run if I jump to Mavericks?
Using a mid-2010 iMac (11,3)
Thanks for your help!

The fun continues...
The DVD Drive on my 10.6 machine seems to no longer be working...
Maybe this caused/contributed to/resulted in the earlier problem?
Anyone else experiencing similar issues? All hard drives and firewire drives seem to be functioning normally at this time.
My 10.5 machine appears to be eating through the DVD writing process successfully... slowly, but successfully

DVD Playback Issues with Dual Layer media

I have been using DVDSP for years now, and have rarely had any issues with burning my final projects to DVD. Any playback issues have usually been issues with players and +or-R media.
I have recently upgraded to a MacPro, and have been really stoked about being able to burn to Dual Layer media. My previous G5 didn't have a DL burner.
I have a large project that fills most the disk, and everything seems great in the software, and when playing the media files on the computer. But when I burn to disk, I have huge issues with playback on different DVD players, computers, etc. I have stuttering with menu's, freezing, and stuttering with playback of video.
I read that the issue could be because of the speed I'm burning at in DVDSP, so I saved as a disk image, and used disk utility to burn at a 4x speed. This seemed to help, but when I got to the end of the movie I had huge issues with stuttering/playback quality. So I burned another copy from the same disk image, and it wouldn't even play in my DVD player.
When I open the Video_TS folder from the DVDSP Build, and play right off my hard drive in the DVD software player, I don't have any of these issues.
So I'm guessing my problem is either my DVD media I'm using, or the burners on this new computer. I've burned DVD's on both burners (yes I have 2) and I still have the same problems.
I am using Memorex DVD+R DL and they are 8x.
Can anyone offer me some advice here. I really wish I could just hit burn and have a disk work. DL media isn't all that cheap and I don't know how many coasters I can make and keep my sanity.

I used compressor and I used the DVD: Best Quality 90 Minutes setting. The bit rate is avg 6.2 and maximum 7.7. And yes I used ac3 audio.
When you say lowest speeds possible... shouldn't a burner that says it burns at a speed work at that speed? I'm cool with burning at a lower speed to get this thing to work, but why have a burner that burns DVD DL at 8x speed, when it doesn't work? Shouldn't it work? Why is it that it won't work?
If I get Verbatim DVD+R DL, can I burn at 8x speed with those?
When I burn in disk utility I used the "varify burned data" and everything checks out ok. So why do I have this issue. Just curious.

Please help! why is the DVD burner not burning dual layer media in my G5?

I have tried, unsuccessully, to burn dual layer DVD's on my G5 using the latest iDVD software (iLife '08) but to no avail. I switch to dual layer in iDVD but invaribly, I always get a multiplexing error at the end of the burn. Any suggestions?
Rick

Are there any plans to update OS 10.4.11 to include a firmware update for the DVD drive? Or has it already been changed in Leopard?
Depending on what model of Superdrive you have, there may be a firmware update from the manufacturer, just not from Apple. Updating to the latest firmware from the manufacturer often provides for better media compatibility, faster burn speeds, and sometimes even features that were disabled by Apple's version of the firmware.
DVD-R DL discs have one major drawback if you're using them to burn video DVDs - you have no control over where the layer break is placed. The first layer must always be filled completely before any data is written to the second layer. DVD+R DL does not have this limitation. You can place the layer break anywhere you like, just as long as the first layer is more full than the second.

Will DVD studio pro convert PAL for an NTSC project

Greetings. I am trying to create NTSC showreels from material that was filmed and captured as PAL. Will importing the PAL asset into an NTSC DVD-SP project mean that it will then encode an NTSC MPEG. Or should I convert the original movie in FCP? I am looking for the solution that requires the least time, as these showreel are needed urgently in the states.
The reason I ask is that as a result of technical inexperience of my colleauges a whole hard drive of PAL assets has been sent to the states in order to make showreels for the production companies directors. This included master Showreel Projects which are in PAL. I am not sure of the best way to unf*£$k the situation but hoped it would be as simple as changing the Disc setting to NTSC. Thanks so much for your help. Also If you know of any sites which could help clear this up with information or software...
Sorry I realise this is a fundamental question
Thanks again
Peter Stenhouse

I'm afraid not. It may even be the case that if you have your project set to NTSC it won't import PAL assets (We do all our encoding outside of DVD-SP and if you try and import PAL m2v's into NTSC project it won't do it).
The PAL assets will need to be converted either professionally by a facilities house which time base correctors and all those doodads or you could try using something like Graeme Nattress's convertor for FCP
http://www.nattress.com/standardsConversion.htm
never used them but heard they bare good (and not too expensive) though time consuming
It may be that you can do it directly in FCP but I seem to remember somewhere that it wasn't very satisfactory. At least you have the advantage that you have PAL resolution going to NTSC res and not the other way (which we have to deal with all the time in the UK - not hugely satisfactory)
Hope this helps
Steve Kirkham

Does DVD Studio pro support 1080p for HD-DVD?

I can't find this option in the track and menu settings options.

Eric Pautsch1 wrote:
The spec does support 1080p but Compressor doesn't encode this.
Actually, Compressor does encode 1080p - so long as you limit the definition of 1080p to 23.98 fps.
The 'issue' that Marc is bumping into is the same one that so many of us were first stumped by when we began creating 24p SD DVDs: DVDSP uses the pulldown-rate as the frame rate (so 23.98 Compressor encodes are seen as 29.97 Non-drop Frame) and Tracks must be 29.97 fps to ensure playback because HD-DVD (and Blu-ray) is limited to 1080i over Component video connections.
Also, and I know this seems silly to some, but HD-DVD and Blu-ray players can still be connected to old-school non-HD TVs via Component, S-Video and Composite connections, so 29.97 playback must be assured.
Hope that helps.

Dvd studio pro support h.264

Hey,
question about dvd SP, it takes in h.264 encoded video, right? I thought I heard that It does, since it was converted to the FC studio. but it wont let me, it says incompatible format.
thanks
Josh

Best move - make self contained .mov in FCP then compress to m2v (H.264 is compressed and has to be recompressed for SD - in theory works on HD Discs, but still buggy)

Dvd Studio Pro Support

I imported and ecoded a video in DSP and when I simulated it it only played the audio and the video was just blackness, same with in the viewer and burning the disk. How can I fix this.

The video is in V1 and the audio is in A1. And no it does not play in the viewer.

Will DVD Studio Pro support dual layer media

Similar Messages

Maybe you are looking for