Will E&M work with the "Night Ring" interface on a Bogen?

The Bogen documentation states "The NIGHT RINGER feature can be activated from 90V ring signal or contact closure." Does an E&M interface support contact closure? And, has anyone implemented this solution successfully specifically with the Night Ringer feature? Many thanks in advanced!
-john

Were you ever able to get this to work. I am trying to get an ATA to use the night ring with Bogen and it works internally but not when you call in from the outside. I tried a viking device that supposedly increases the voltage but with no luck??

Similar Messages

  • Will the lightning to 30 pin adapter work with the irig midi interface?

    will the lightning to 30 pin adapter work with the irig midi interface?  Want to record guitar with garage band on ipad mini. need quick/easy way to connect USB to ipad mini

    From both? Interesting. I like that though. I am looking for the controls to be on the iPhone rather than the stereo as it ***** finding songs this way. And yeah, $39.00 is a lot for this, and it is only roughly 8" long. Oh well, I will need it, so I will have to buy it. Thanks for the message back!

  • Wifi is not available where I come from. I have broadband connection where data transmission is through cell sites then to USB modem connected to a computer. The modem draws power from the computer. Will this setup work with the ipad?

    Wifi is not available where I come from. I have broadband connection where data transmission is through cell sites then to USB modem connected to a computer. The modem draws power from the computer. Will this setup work with the ipad?

    iPad requires Wifi (or 3G /LTE) to connect to the Internet. You cannot connect a USB modem to the iPad.
    You can create your own WiFi hotspot through your computer for your iPad to connect to, if your computer supports this functionality. All Wifi Macs and many Wifi PCs do. Check your computer manual for how to do it.

  • Will nokia 301 work with the old PC suite?

    Hi,
    I am planning to buy Nokia 301(Dual sim varient),
    i am more concerned about Nokia PC suite connectivity over blue tooth (PC suite -(v.7.1.180.94) and Not Nokia suite).
    Can you please tell will nokia 301 work with the old PC suite or not.?
    and btw is your Nokia 301 a dual sim variant or single sim ?
    Moderator's note: We have amended the title of this post and its replies as they were moved from another thread.

    noreport wrote:
    Will Nokia 301 work with the old PC Suite?
    Yes. For details, there you go …

  • HT203175 While trying to use my iTunes library it will suddenly stop working with the erro message Runtime error R6025 pure virtual function call.  HELP!!!

    While trying to use my iTunes library it will suddenly stop working with the error message Runtime error R6025 pure virtual function call.
    Help???

    Just responded to this in another thread (note we used Captivate 7 so it might be a different error).
    We found that when we created files with embedded swf files that existed ABOVE widgets in the timeline, when someone else tried to open our file it broke/we got the runtime error. The original person could still open it for a time, but eventually the cache would clear and they couldn't.
    However, if we ensured swf files are BELOW widgets in the source files, it didn't break. In fact, if we found one that was breaking and got the author to move the swf file on the timeline, it would start working for others.
    STRANGE! Let me know if this works for you to!

  • If i buy a new ipad and bring it to England will it still work with the different voltages and the 3G/4G?

    if i buy a new ipad and bring it to England will it still work with the different voltages and the 3G/4G?

    They both seem to cover the same 3G bands - from http://www.apple.com/ipad/specs/ :
    Wi-Fi + 4G for AT&T model: 4G LTE (700, 2100 MHz); UMTS/HSPA/HSPA+/DC-HSDPA (850, 900, 1900, 2100 MHz); GSM/EDGE (850, 900, 1800, 1900 MHz)
    Wi-Fi + 4G for Verizon model: 4G LTE (700 MHz); CDMA EV-DO Rev. A (800, 1900 MHz);UMTS/HSPA/HSPA+/DC-HSDPA (850, 900, 1900, 2100 MHz); GSM/EDGE (850, 900, 1800, 1900 MHz)
    CDMA isn't any use here as there aren't any UK CDMA based carriers, they are all GSM/sim card based (I'm not aware of any CDMA carriers in Europe). As the AT&T version appears to support an extra 4G LTE band then that might be the better one.

  • I have a ibook G4 which has become redundant as my phone will no longer work with the version of itunes installed (latest it can use), how can I back up my phone to transfer to a new computer (a PC now)?

    My iphone 4s (7.1.1) will no longer work with my ibook G4 which is running 10.5.8. I have a PC which i'm now going to have to use, I've manually transferred my music and photos, but how do I go about transferring my contacts and calenders. What does itunes on PC sync to in terms of contacts and calenders?
    Thanks!

    Hi there BDempster,
    You may find the information in the articles below helpful.
    iOS: How to transfer or sync content to your computer
    http://support.apple.com/kb/HT1296
    iTunes 11 for Windows: Sync contacts, calendars, and other info with iPod, iPhone, or iPad
    http://support.apple.com/kb/PH12317
    You can use iTunes to sync the contacts, calendars, notes, Safari bookmarks, and email account information on your computer with your iPod, iPhone, or iPad. iTunes also syncs this information from your device to your computer—for example, if you add contacts on your iPad, syncing adds those contacts to Windows address book or Outlook Express on your computer.
    -Griff W. 

  • Will my MBA work with the new LED Cinema Display

    I have a first generation MBA, model identifier MBA 1.1, and want to know if my mini display adapter will work with the new LED Cinema Display. I believe I have a micro-DVI that is different from the new MacBooks and MacBook Professional models that have a new Mini DisplayPort. If anyone is using this old MBA to new LED Cinema Display combination please let me know.

    Scott,
    The new display isn't shipping from Apple until some time in November so the only direct feedback you'll get is from anyone that's been to the store and played with the demo unit.
    With that being said, it would appear (based on the system specs and requirements, posted on the site) that the new display requires the new adapter type that's found only on the new MacBook, MacBook Pro and MacBook Air.

  • Using a BEFSR41v3 with a WRT110 and will a WRE54G work with the WRT110

    I want to use the BEFSR41 as my main router and use the WRT110 as an access point (wired from the BEFSR41) on the 2nd  floor of my house. Will this work?  Will I lose speed??
    Is the WRE54G compatible (and will it work) with the WRT110?

    If you want to use WRT110 with BEFSR41 then,you need to hardwired the wireless router to the wired router using an ethernet cable.Follow this link to cascade both the router.
    If the Range Expander is version3 then,it should work with WRT110.

  • Will my iHome work with the iPhone?

    I have an iHome from the summer i think around 2 years ago. Both my ipod mini and my old black video ipod (not the classic, the video) work with it but I was wondering, will the iPhone?
    Another thing, I have Logitech mm50 black iPod speakers that went with my video (until someone broke into my car and stole the ipod!!). Will my iPhone work with those? I know that the iPhone plays music w/o headphones but I like to blast music loud @ parties.
    So, please let me know if the iHome and the speakers will work with iPhone, b/c i rly dont want to have to buy a new iHome or speakers!

    ok thanks so much
    do you know if the iPhone will work with ipod speakers meant for the old black ipod video? I have speakers like that from Logitech...they're mobile so they're good on the road...will it work the same way like with the iPhone? like, if i put the iPhone in airplane mode, will it more ok? :\

  • Will Boot Camp work with the new Macbook Airs?

    I want an 11.6" MBA now, but I want to be sure I can put Windows 7 on it if I need to. Will this just work like the other MacBooks? Does the new MBA software USB key come with the Boot Camp setup files? Thanks!

    I have installed Windows 7 Ultimate 64 on my MBA 11" using a USB flash drive and a program called rEFIt, http://refit.sourceforge.net. it's a free program that also lets you install Linux too. you can even triple boot.
    i have had no problems with my MBA and i've had it for a few weeks now. it's awesome.
    for those curious how i managed to install Win 7 via USB flash drive, i used a free program from MS that you can find here. http://store.microsoft.com/Help/ISO-Tool?err=t2#at2
    i hope that helps.
    now i must go post a new thread with my problem of enabling AHCI on the MBA!

  • Will a YubiKey work with the Lightning to USB adapter?

    According to Yubico the YubiKey works with the old Camera Connection Kit but no word on the new Lightning to USB adapter.

    The adapters have no logic, it's the iPad that determines compatibility with devices. It it works, it works with one exception. Sometimes high-power draw devices must be connected to a powered hub to work.
    Single adapter for 1$10 more: http://store.apple.com/us/product/MC531ZM/A/apple-ipad-camera-connection-kit?fno de=3a

  • Will iphone cases work with the touch

    when looking for a case, can you use an iphone case?
    or do you have to buy specific touch cases?

    1G Touch cases also won't work with the 2G Touch that was just released. The case is a slightly different shape and there's a volume control on the side that would be covered by a 1G case.
    The way power is supplied to the Touch through the dock connector changed as well.
    Cheers,
    Andreas

  • Will hardware drivers work with the run-time engine or only a full version of Labview?

    Hello.
    I'm trying to get a quatech I/O card to work. The instructions with the drivers we were given state "you must have labview installed before installing these drivers".
    A program I wrote on my machine works fine with those drivers and does toggle outputs on the card, but when I build it into an executable on our test unit (doesn't have a full version of Labview, just the Run-Time engine) the card doesn't work.
    We installed the run-time engine on the unit, then the drivers.
    I guess my question is: Do most drivers work with both the full version of Labview and the run-time engine? Or do I need to somehow 'convert' these drivers to work with the run-time engine?
    Th
    anks for your help!
    Dave Neumann
    [email protected]

    Dave:
    I can't determine which dll is required but if there are more than one that
    shipped with the quatech I/O card try to placing one dll at a time in the
    same directory as the exe so that you can determine which one is the
    required one. If that doesn't do it then it may need more than jsut one of
    the dlls so placing all that came with the quatech I/O card s/w driver
    package in the same directory as the exe should do the trick.
    Best of luck.
    -Tom
    "Neumannium" wrote in message
    news:[email protected]..
    > Tom,
    >
    > Thanks for your reply. One of the problems I'm having is figuring out
    > which .dll I would need to include (I'm not a software guy).
    >
    > Would the .dll your speaking of be different th
    an the one which is
    > installed with the drivers? I'm looking at a .dll that is installed
    > when you install the labview drivers for this card, but the run-time
    > engine still doesn't want to get the card to work. (The file installed
    > when I install the drivers is called 'daqlv32.dll' and I don't know
    > how to find any other .dll's I might need)
    >
    > Actually, it appears the card 'is' being seen by the run-time engine,
    > but I'm getting impulses rather than distinct changes of state.
    >
    > Anyway, thanks for the help.
    >
    > Dave Neumann
    > [email protected]

  • Will Motion 5 work with the NVIDIA GeForce 8600M GT with 256 MB?

    I have a 15" MacBook Pro Intel Core 2 Duo with a NVIDIA GeForce 8600M GT with 256 MB and 4 GB RAM.  I need to know if this will work with Motion 5?

    Patrick, You should be fine "just" - here is the spec sheet:-
    http://support.apple.com/kb/HT4664
    Alan

Maybe you are looking for

  • How can I connect many client in  one server ?

    Hello, My name is Fabio, i live in Brazil. I need that two or more conect the ane server socket. Who can help me ?

  • Tax issue in Return order

    Hey All, Am using Vertex system to calculate taxes. I have billed a customer and let's say taxes are  250$. when i return that item by creating a return order against billing(with reference) using VA01, the taxes charged to customer are applied when

  • Update of 640 kernel files fails

    Hi all, I am experiencing a rather strange situation here. I am on Windows 2003 server and MSSQL, running SAP R/3 4.7x200. I am trying to update the kernel files from kernel patch 80 to 154. After I stop SAP and SAPOSCOL and SAP<SID>_00 services, I s

  • Additonal Text for Part Numbered Items

    Hello, My problem is we have standard descriptions for part numbered items. I want to be able to add additional lines to explain to a buyer what the part is. Maybe one or two lines. MM02 provides kind of what I'm looking for, though this text only ap

  • Cannot load Garage Band '09 tune into Final Cut Express 4

    Just bought FCE 4 and am trying to load a Garage Band '09 tune into it. Receiving a file error. Do I need to convert into some other format before loading into Final Cut Express 4?