Will elements 11 recognize and pull in Canon pictures

Will elements 11 recognize and download Canon SLR pics?

Nowhere do you say if you are shooting CR2 ("RAW") or .jpg. If .jpg, it should not matter.
From Adobe archives:
"Camera Raw 6.4.1 update
This old version of the Camera Raw plug-in replaces the original Camera Raw plug-in that was installed with Adobe® Photoshop Elements 9 and Premiere® Elements 9 software.
Support for the following camera has been added in this update. Visit the Camera Raw page for a complete list of supported cameras.
Canon EOS 600D (Rebel T3i / Kiss X5 Digital)
Canon EOS 1100D (Rebel T3 / Kiss X50 Digital)
Fuji FinePix S200 EXR
...and others."
Photoshop Elements 11 is current and uses ACR 7.4 and no higher.
In a month or two, if Adobe stays on schedule, Photoshop Elements 12 will arrive. It will use the current ACR 8.2 or newer. If you have a very new camera model, you may need to wait.

Similar Messages

My iphone will not do anything and it has a picture of the usb cable and the itunes logo on the screen

my will not do anything and it has a picture of the usb cable and the itunes logo on the screen

Your iPhone is telling you you need to restore it using iTunes on a computer. Follow the instructions below.
Use iTunes to restore your iOS device to factory settings - Apple Support

Will elements 13 raw converter work with Canon 7D MK2 raw files

My friend is about to purchase the new Canon 7D Mk2 DSLR camera. He currently only takes images in jpg format and edits images with the Canon software provided with his current Canon camera. I have encouraged him to purchase Elements 13 and to start taking images in raw and using the raw converter. Will the raw converter in elements 13 be compatible with the raw files of the new Canon 7D MK2, please?
The Canon 7D MK2 is a new model and I realise that Adobe may not yet have prepared a raw converter to work with images from this camera. However it may be that the raw converter for the new camera is the same as that used in camera it replaces. Does anyone know please?
Regards Dave S.

The 7d mkii is not yet supported but should be in the next camera raw update. It’s not yet featured on the ACR8.7 list of new cameras, but this is only release candidate software. The 7d mkii could easily feature in the final version. Keep an eye on Adobe Labs for further updates.
http://labs.adobe.com/downloads/cameraraw8-7.html

Will elements 9 recognize more than 4gb ram?

why does elements 9 only show 4gb ram when my system (window 7 professional) has 12 gb & how do I get it to recognized it?
Elements Organizer 9.0.3.0
Core Version: 9.0.3 (20110328.m.11320)
Language Version: 9.0 (20100905.m.9093)
Current Catalog:
Catalog Name: My Catalog
Catalog Location: C:\ProgramData\Adobe\Elements Organizer\Catalogs\My Catalog\
Catalog Size: 73.3MB
Catalog Cache Size: 627.1MB
System:
Operating System Name: 2000
Operating System Version: 6.1 Service Pack 1
System Architecture: Intel CPU Family:6 Model:14 Stepping:5 with MMX, SSE Integer, SSE FP
Built-in Memory: 4GB
Free Memory: 4GB
Important Drivers / Plug-ins / Libraries:
Microsoft DirectX Version: 9.0
Apple QuickTime Version: Not installed
Adobe Reader Version: 9.4
Adobe Acrobat Version: Not installed
CD and DVD drives:
D: (ASUS DRW-24B1ST BUS: 1 ID: 1 Firmware: 1.01)

To follow up on 99jon's post, 2 to the 32nd power is 4.3Gb. Therefore, PSE will not be able to see more than 4Gb. Win7 will do a great job of managing the installed memory, so there's nothing for you to do but relax and run your applications.
Ken
Message was edited by: photodrawken to correct typo.

LR is not able to pull up my photos. I have checked and the external hard drive is working but none of the thousands of photos are showing up. What can I do to get LR to recognize and pull up my photos.

LR is not abel to pull up my photos. There is the explanation mark on all the photos meaning that LR can not find them. The external hard drive is working. I have even changed the usb cord to see if that was the problem. I have been able to pull up the photos individually off of the external hard drive so that is working.

Yes, yes, yes! I do recall that I changed the drive letter but it did not register on the Finder so I had forgotten about it. Now it works and LR is now able to read the drive. Thank you sooooooo much. BTW, dealing with Adobe on this product is exceptionally frustrating since you can't talk to a human being on the phone. Rick, Can't thank you enough for pointing me in the right direction.

I have a time capsule with a ton of media on it. Will Apple TV recognize and play the media files without itunes?

I have a time capsule with all my mdeial files. Will apple TV play the amedia files with out a need for pc or Itunes?
Thank you in advance

rfromla jolla,
What I'm hearing now is that any NSA still needs some iTunes interface to "go through". I'm going to use iTunes on my iMac as the pass through. I keep it running just about all the time.
You can use the little Apple Mac mini fine. If I were rich I'd do that.....
Oh well.....

New to Elements - Save cutout and paste in different picture.

I am new to photoshop. I'm trying to save an image I was able to "cutout" from one picture, then I want to paste that image onto a different photo. I'm learning about layers (slowly...) and I've watched several tutorials. Everything I've seen/heard makes it look easy, but I'm missing something. Been working on this for several evenings with no luck. Using Photoshop Elements 11. Appreciate any comments, links, ets. Thanks in advance.

Once you have the selection ready on the first image,
use the move tool (refer the below screen shot for the moov tool) and then drag the selection from first image to the secon image tab.
As soon as you will place the cursor on the second image tab the second image will open up and now you can place the cutout on the second image.
It will create the layer for you automatically.
-Harshit yadav

Iphoto will no longer recognize my camera, says it does not recognize the format....they are jpegs? And now it will not even open when I plug my Canon Eos Camera in to download. I have checked everything on the camera and it is working perfectly....

Iphoto will no longer open when attaching my Canon Eos Camera. I have checked the camera and everything is working perfecty. When I open it myself, Iphoto is working perfectly too. But now when I attach the camera, Iphoto no longer opens at all. Yesterday it did open after a really long wait but it kept saying that it did not recognize the "format" of the images....they were jpegs??? Then it flashed on and off and if I hit download at just the right second they would download. But today it won't work at all. Any suggestions.
thanks

As a Test:
Hold down the option (or alt) key and launch iPhoto. From the resulting menu select 'Create Library'
Import a few pics into this new, blank library. Is the Problem repeated there?

Will Premiere Elements 10 recognize MOV files?

I have a new EOS 60D Canon camera. Will Premiere Elements 10 recognize the .MOV file the videos are stored as?

With a powerful computer, PrE can handled H.264 just fine.
What are the specs. of your computer, and especially the CPU? Ideally, one should have a fast i7 to easily process H.264, whether it is in AVCHD, or some other wrapper, like MOV.
Now, many camera mfgrs. work in different "flavors" of H.264, and the one that is common in most PrE installations, is Apple's H.264, installed with Apple's QT Player. However, that might not be the best one. If your Canon came with a utility disc, it should have the Canon version of H.264 (note that might differ from a Canon H.264 for another camera, but should be close). That H.264 CODEC might be a separate, discrete install, might be installed with the camera's driver, or might be installed with some Canon editing/cataloging utility, which would be most common. Even if one is not going to use that software, if the CODEC is part of it, then installation would be a good idea.
Then, one would create a New Project, that should match that Source Footage 100%. When one of the Clips has been dragged to the Timeline, in a properly setup Project, there should be NO red line above that footage, until and Effect, or some sort of overlay, has been added. If there IS a red line initially, then the Project does not match the Source Footage 100%, and it should.
To get the best possible match, between the Source Footage and the Project, it would be best to be working with PrE 10, as it contains more DSLR Presets, and if one has the proper CODEC installed, then editing on a stout computer should go fine.
Good luck,
Hunt

Elements 11 - why does it not recognize RAW photos from Canon 70D?

Elements 11 - why does it not recognize RAW photos from Canon 70D?

Hi,
The 70D requires Camera Raw 8.2 which is not compatible with Photoshop Elements 11.
Your choices are
1) Upgrade to Photoshop Elements 12
2) Use the Canon DPP application to convert the CR2 files to TIF files and then import the TIF files into the organizer
3) Use the free download of the Adobe DNG converter to convert the CR2 file to DNG files and then import the DNG files to the organizer.
Note: if you are running on XP or Vista, you need version 8.3 of the converter - the latest (8.4) will not work.
DNG Converter 8.4
Windows: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5739
MAC: http://www.adobe.com/support/downloads/detail.jsp?ftpID=5738
DNG Converter 8.3
http://www.adobe.com/support/downloads/detail.jsp?ftpID=5694
Brian

How can I get Premier Elements to recognize my Canon Vixia HV40 to record tape from it?

I recently installed Adobe Premier Elements 12 on my new Lenovo U310 Ideapad computer. I opened the program and was able to transfer a clip from a file transfered to me from a smart phone recording and start assembling a new home movie. However, when I tried to get video footage from my Canon Vixia HV40 tape camcorder, I received a message "No HDV camera connected. I then used my older Canon Vixia HV20 camera and changed the USB connecting cable, but that camera too was not recognized. In the past, I had been succesfull using an older version of Premie Elements to get footage from my Canon camera. Is it possible that this new Premier Elements 12 is not programed to pick up these Canon video cameras or is their some way around this problem. My new computer does not have a 1394 input.

TR Snevac
As far as I have ever seen reported DV or HDV data capture into Premiere Elements Capture Windows (any version) does not work unless the connection is firewire. And, there are occasions (especially with HDV capture firewire) the require that the capture firewire be done in HDVSplit and then the split clips imported into a Premiere Elements project via the typical Get Media/Add Media route.
Which version of Premiere Elements allowed you to do a DV or HDV capture firewire in to its Capture Window using a USB connection? From what you wrote it gave me the impression that you were saying that you had.
If you have followed the protocol for HDV data capture firewire into Premiere Elements 12 (with correct project preset)
http://help.adobe.com/fr_FR/premiereelements/using/WS5CDA0F91-60F1-4b79-ABF6-E9E75F498DB2. html#WS2AF26FB5-4C63-4c46-9DB3-7249558F6528
then you would need to explore the use of HDVSplit (firewire connection) and then import of the .m2t split clips from that process in to Premiere Elements 12 (Add Media/Files and Folders/Project Assets).
http://strony.aster.pl/paviko/hdvsplit.htm
If both these Canon camera are miniDV camcorders, then you need a firewire connect to the data capture into Premiere Elements Capture Windows.
Do you have access to a computer with a firewire port?
Or
Does your computer have what is referred to as a PCMCIA slot for use with a firewire card? Have you looked into the possibility? No sure if that will work for you.
ATR

How can you get Premiere Elements to recognize hardware. It will NOT recognize my Dazzle Video Capture device or either of two HP DVD burntes. I feel like I wasted my money.

That should have read, It will NOT recognize my Dazzle device or either of 2 HP DVD burners.

TNTerri
What version of Premiere Elements are you using and on what computer operating system is it running?
If Premiere Elements 13, please be advised that it does not support DV or HDV capture firewire. And, any USB devices
have never worked for that purpose for Premiere Elements (any version).
As for the burner not being recognized in the Burner Location field of burn dialog of the program, please consider
(if you are dealing with DVD CD burner rather than a Blu-ray DVD CD burner.
CD, DVD drive not recognized after Adobe application install | Windows
Depending on how matters progress, you may want to do an uninstall reinstall using the following scheme
Uninstall, the usual Control Panel way
Do a free ccleaner run through to get rid of leftovers from incomplete installs reinstalls
CCleaner - PC Optimization and Cleaning - Free Download
Reinstall with antivirus and firewall(s) disabled.
We might even involve later a deletion of the Adobe Premiere Elements Prefs file and, if necessary, the whole Folder in
which it exists. More on the latter later.
ATR

When will Camera raw be available for processing Canon 7d Mark two in Photoshop Elements 12

When will Camera raw be available for processing Canon 7d Mark two in Photoshop Elements 12?

Hi,
Probably never.
PSE 13 is now out and updates are usually only compatible with the latest version - ACR 8.6 didn't even make it for PSE 12.
ACR 8.7 for PSE 13 should probably include support but we don't know when it will be released.
Brian

Will Premiere Elements 9 edit and save changes to avchd losslessly?

Hi,
I want to buy a new premiere elements to replace my old one (vrsn 3), can I upgrade it still or is it too old?
Also, will the new premiere elements 9 edit and save changes to avchd files from Panasonic and Canon without losing any quality?
I came across 'provides native support for avchd'; what does it mean? Does it mean that I can edit and save avchd files with out losing quality?
Thanks,
H

For your several questions...
One... download and try the 30-day free trials
Two... read in the user guides
CS5 User Guides - online and PDF (see link in upper right corner at individual pages)
http://blogs.adobe.com/premiereprotraining/2010/08/help-documents-for-creative-suite-5-pdf -and-html.html
http://help.adobe.com/en_US/PremiereElements/8.0/Win/Using/index.html
P-Elements 9 http://help.adobe.com/en_US/premiereelements/using/index.html

I have a d70 canon camera, will Elements 12 support the CR2 files it makes in the raw exposures?

I have a d70 canon camera, will Elements 12 support the CR2 files it makes in the raw exposures?

Hi,
I assume you mean the Canon 70D - that should be supported by ACR 8.2
If you have PSE 12, you will need to update it by using Help -> Update.
If you don't have PSE 12, the best thing is to download and install the trial version. You will still need to update it. It will function as the full product for 30 days so you can make sure it reads your raw files.
http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us
Brian

Will elements 11 recognize and pull in Canon pictures

Similar Messages

Maybe you are looking for