Will Elements or lightroom batch autorotate jpeg images losslessly?

Need to process folders automatically....

A related question as I am also wondering about Lightroom.
One of the features I love about PSE8 Organizor is the ability to synch albums directly from itunes to my ipod touch.
If light room is loaded does it appear under the photo tab as an option to import albums?
Thanks
KSM

Similar Messages

Photoshop Elements Upload to Shutterfly using JPEG images

I am trying to upload my Photoshop Elements 12 photobook as separate JPEG images. When I export the photobook to JPEG images the center of the 2 page spread goes onto both the JPEG of the left and right side of the individual JPEGs. Does anyone know how to avoid this problem?

Will Elements and Lightroom open RAW files fro the Sony DSCRX-100 camera?

Will elements and l;ightroom open RAW files from the Sony DSCRX-100 camera ?

202daansn wrote:
Will elements and l;ightroom open RAW files from the Sony DSCRX-100 camera ?
I have the RX100 and confess to be an Adobe fan. You did not say which Lightroom or which elements you want to use. You need the latest versions.
Photoshop Elements 11 comes with Adobe Camera RAW (ACR) version 7.0 in place when you install it. Under the help menu, there is a choice to check for updates. If you do, ACR 7.2 installs. The RX100 is included in 7.2. Previous versions of Photoshop Elements will not udate to 7.2. When you open a RAW photo, a screen pops up that lets you adjust, convert and save to something Photoshop Elements can handle.
You have to have Lightroom 4.2 to get RX100 usefulness. Lightroom uses, but hides, the ACR engine. Instead the slider controls are built in the user interface. When you buy it, it installs as 4.0. The help menu also has an update choice so that you can get to 4.2 from 4.0.
You didn't ask, but Premier Elements 11 is a good choice for video because it is he first version that "officially" supports the high quality 1080p60 or "PS" setting in the RX100.
On T day, I shot RAW photos of my granddaughters dancing to a Wii game in terrible light. Yesterday I "adjusted" the batch of RAW shots taken with the RX100 in Lightroom and saved them as .jpg files. Today, I wll make a video in Premier Elements from those .jpg images, put in some pan and zoom effects, add a sound track and put it on Vimeo.
My view is that an RX100 owner needs PSE 11, PrE 11 and Lightroom 4 to take advantage of the camera's capabilties. Setting it on "fine" .jpg and uploading snapshots to Flicker leaves an awful lot on the table!
Bill

When will Elements and Lightroom support the RAW files from the Olympus em5 Mark 2 camera?

Camera was launched in Feb 15. As far as I understand, neither product will open the RAW files for some months. When will that be, does anyone know?

Adobe Camera Raw gets updated three or four times per year in an orderly fashion.
Beyond that, Adobe does not comment on unreleased software.
It should not take over nine (9) months, but it could be as early as at the time of the next orderly release

Simple patch for makepkg: Optimize PNG/JPEG images losslessly

Hello there! I've written a (rather simple) patch for Makepkg that makes use of the tools jpegoptim and optipng, using more or less the same method that the current code for using UPX works.
These two utilities use a handful of methods for producing more efficiently optimized image files, while not losing or altering the image given by decompression.
47c47
< packaging_options=('strip' 'docs' 'libtool' 'emptydirs' 'zipman' 'purge' 'upx')
> packaging_options=('strip' 'docs' 'libtool' 'emptydirs' 'zipman' 'purge' 'upx' 'img')
1055c1055
< find . -type f -perm -u+w 2>/dev/null | while read binary ; do
> find . -type f -iname "*.png" 2>/dev/null | while read binary ; do
1061a1062,1075
> if [[ $(check_option img) = "y" ]]; then
> msg2 "$(gettext "Compressing images...")"
> local image
> find . -type f 2>/dev/null | while read image ; do
> if [[ $(file -bi "$image") = *'image/png'* ]]; then
> optipng "$image" &>/dev/null ||
> warning "$(gettext "Could not compress image : %s")" "${image/$pkgdir\//}"
> fi
> if [[ $(file -bi "$image") = *'image/jpeg'* ]]; then
> jpegoptim "$image" &>/dev/null ||
> warning "$(gettext "Could not compress image : %s")" "${image/$pkgdir\//}"
> fi
> done
> fi
1647a1662,1669
> ret=1
> fi
> fi
>
> # img - image compression
> if [[ $(check_option img) == 'y' ]]; then
> if ! type -p jpegoptim >/dev/null; then
> error "$(gettext "Cannot find the %s binary required for compressing images.")" "jpegoptim"
Save as makepkg.patch, patch /usr/bin/makepkg makepkg.patch, then add 'img' to your OPTIONS in /etc/makepkg.conf.
On most files this gives a 5-10% space optimization, but with smaller files or files which were badly compressed in the first place it can get 30-50%.
Obviously some things could be more elegant, there's no method given here to pass options to either program, but implementing that would be trivial.
Anyone interested?

You should ask about this on the [pacman-dev] mailing list. It is nice that you are sharing it here. But if you really think this is a superior way of handling it, then submitting it upstream for review is probably the better thing to do.

JPEG image in lightroom 4 book module

In creating a photobook in Lightroom 4 two JPEG images have an exclamation point in a red square in the upper right had corner which when clicked says "This photo is offline orcannot be found. It will be omitted when you print your book." How can this be fixed so that I can send the book to Blurb for printing?
Kevin

The message means exactly what it says.
That image is not available to Lightroom currently.
Either this image has been moved (outside of Lightroom) or inadvertantly deleted.
In the Library module R-click on the question mark and see if you can't track it down and so re-acquaint Lightroom with this image.
Tony Jay

Rotate image lossless

Hello,
is there a method in java to rotate an jpeg image lossless?
So that all meta informations keep exists and the picture has the same quality?
Thank you
Johannes

I try it with AffineTransform but I always loss after save the new Image all Metadata and I think the Image has not the same Quality.
Thats my Code:
    BufferedImage i = null;
    IIOMetadata imeta = null;
      ImageInputStream iis = ImageIO.createImageInputStream(file);
      ImageReader reader = ImageIO.getImageReadersByFormatName("jpg").next();
      reader.setInput(iis,true);
      ImageReadParam params = reader.getDefaultReadParam();
      sourceBI = reader.read(0,params);
      imeta = reader.getImageMetadata(0);
    BufferedImage sourceBI = new BufferedImage(X, Y, BufferedImage.TYPE_INT_RGB);
    AffineTransform at = new AffineTransform();
    at.rotate(Math.toRadians( angel ), (sourceBI.getWidth() / 2), (sourceBI.getHeight() / 2) );
    AffineTransform translationTransform;
    translationTransform = findTranslation( at, sourceBI, 90);
    at.preConcatenate( translationTransform );
    Graphics2D g = (Graphics2D) sourceBI.getGraphics();
    g.setTransform(at);
    g.drawImage(inputImage, 0, 0, null);
      FileOutputStream fos = new FileOutputStream(file);
      ImageWriter writer = ImageIO.getImageWritersByFormatName("jpg").next();
      ImageOutputStream ios = ImageIO.createImageOutputStream(fos);
      writer.setOutput(ios);
      ImageWriteParam iwparam = new JPEGImageWriteParam(Locale.getDefault());
      iwparam.setCompressionMode(ImageWriteParam.MODE_EXPLICIT);
      // set JPEG Quality
      iwparam.setCompressionQuality(0.92f);
      writer.write(imeta, new IIOImage(sourceBI, null, null), iwparam);
      ios.flush();
      writer.dispose();
      ios.close();
      fos.close();That's the findTranslation Method:
private static AffineTransform findTranslation(AffineTransform at, BufferedImage bi, int angel ) {
    Point2D p2din, p2dout;
    double ytrans, xtrans = 0.0;
    AffineTransform tat = new AffineTransform();
    if(angel == 180){
      p2din = new Point2D.Double(0, bi.getHeight());
    }else{
      p2din = new Point2D.Double(0.0, 0.0);
    p2dout = at.transform(p2din, null);
    if(angel == 270){
      xtrans = p2dout.getX();
      ytrans = xtrans;
    }else{
      ytrans = p2dout.getY();
      xtrans = ytrans;
    tat.translate(-xtrans, -ytrans);
    return tat;
}When I set the quality for the target picture to hight the target picture size is higher the from the source picture.
What can I do to rotate lossless and keep the Meta Information?
Johannes

How to import a jpeg image into premier elements 12?

how do i import a jpeg image into premier elements 12?

chuckx
Just for background information, what computer operating system is your Premiere Elements 12 running on?
The generalized answer is Add Media/Files and Folders/Projects Assets from where you drag the photo to the Expert view Timeline.
But all that can generate a mountain of questions about the photo and the project into which it will be going
a. what are the pixel dimensions of the photo - will or will I not have to resize or crop/resize the photo for the project
b. is the photo going into a project that will consist of photos and videos
c. if video inclusion, that leads to questions about the properties of the video so that you can set the project preset to match those
d. that leads to questions on the best size to have your photo before you import them into this project.
So, one simple question generates a lot of side questions.
Please let us know how we might help to sort out the details for your Premiere Elements workflow and its source media.
Thank you.
ATr

Lightroom color cast question of JPEG image

Lightroom color cast question of JPEG image
Camera Canon MKII Color Matrix Adobe RGB
Photoshop CS Color Setting Adobe RGB (1998)
Lightroom 1.2 as new lightroom user I did not think that I needed to choose a color setting or color profile until I am ready to print my photos. I have not done any preset camera calibration.
Link to my website with example photo http://www.basecampphotos.com/color.jpg
My question is why is Lightroom displaying the images with a yellow color cast ? The image is a print screen from Lightroom on the left and Photoshop on the right The color cast problem can be seen in the white walls of the stairway. Also when viewing the image with Windows Picture and Fax viewer the walls are white as expected.
Any ideas or suggestions as to why Lightroom is displaying the images with the yellow color cast or what I need to do to correct the issue ?
Thanks
Jim

Almost definitely a corrupt monitor profile. Time and again this turns out to be the cause of such differences between PS and LR. You need to recalibrate the monitor or if you do not have a hardware calibrator, delete the profile from windows' monitor properties pane to test and then get a hardware calibrator.
P.S since you are using adobeRGB jpegs, Windows picture and Fax viewers cannot give you the correct colors even on a calibrated monitor. Those are not color managed programs (I believe picture viewer finally is in Vista but definitely not in XP which you appear to be using). Also, PS has to be correctly set up to always preserve embedded profiles and to ask when you have profile mismatches, otherwise even PS will give incorrect color. Make sure to set this up in Edit>Color settings.
P.S.2: Make sure you are not applying defaults in Lightroom to your images either on import or elsewhere. Sometimes people by accident define develop defaults that in this case might contain a white balance shift. Go to LR preferences and open the Presets tab. Here click on "Reset all default Develop settings" and make sure that only the auto grayscale checkbox is ticked. For images that it might have already happened to, make sure to hit the reset button.

I cannot erase alias JPeg images on a memory card so that it will not accept any more which I try to load onto it, yet there are no actual images available if I click on any of them. The error message states that one or more cannot

Cannot delete aliases for JPeg images on a lumix camera memory card even selecting individual images anjd trying to move to trash -error35 one or more items cannot be found. No image available on clicking or if card put back into camera-"no images to disply" Yet if try to add more images, message that card is full! Any suggestions?

Deleting from iPhoto or image capture after import should be fine and shouldn't cause any issues. Deleting from the folder view of finder, can cause issues as the camera can the image is still there. You can try emptying the trash on your mac if you deleted them via the finder, as although you've deleted it, it's only marked as trashed and not actually deleted until you empty the trash - ie it won't relieve the space taken by the files.
If your still having issues after you try this, you may be best formating the memory card. This will wipe all data on it though, so make sure you do copy anything off that yo u want to keep! Format from the camera, so that choosing the format>erase all option from the menu of most cameras.

I am trying to use photomerge compose. I open one standard jpeg image and one image that is my business logo in a png format. When I select the png image, to extract the logo from it, it appears as all white and will not allow me to select the logo from

I am trying to use photomerge compose. I open one standard jpeg image and one image that is my business logo in a png format. When I select the png image, to extract the logo from it, it appears as all white and will not allow me to select the logo from it. It has worked in the past but I downloaded the update today and photomerge will not work correctly. Any ideas?

hedger,
How do you expect anyone to help when we don't know a darned thing about the file, abut your setup, exact version of Photoshop and your OS, machine specs, etc.?
BOILERPLATE TEXT:
Note that this is boilerplate text.
If you give complete and detailed information about your setup and the issue at hand,
such as your platform (Mac or Win),
exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
your settings in Photoshop > Preference > Performance
the type of file you were working on,
machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
what troubleshooting steps you have taken so far,
what error message(s) you receive,
if having issues opening raw files also the exact camera make and model that generated them,
if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
etc.,
someone may be able to help you (not necessarily this poster, who is not a Windows user).
a screen shot of your settings or of the image could be very helpful too.
Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
http://forums.adobe.com/thread/419981?tstart=0
Thanks!

Lightroom (Win7) 4.3 "Edit in" function opens Elements 11 but doesn't open image

Howdy All,
I'm running Windows 7 64bit Lightroom 4.3, right clicking on the current open image and selecting "Edit In" "Photoshop Elements 11.exe" which does cause Elements 11 to open but without opening the image originally selected from within Lightroom. I saw that Mac users need to point the "Edit In" Preferences to the proper location of the Photoshop Elements Editor but I couldn't find info that confirms I'm pointing at the "right" Photoshop Elements 11 file for Windows 7 users.
Note that I had to manually enter the "Photoshop Elements 11.exe" within the preferences settings because I had previously uninstalled Elements 9 which had been the choice within the preferences setting for "Edit In".
How do I get this Lightroom4.3/Elements11 sequence to automatically open the RAW image in Elements 11 with the current set of edits made in Lightroom?
Thanks, Dave
(My 1st post in this forum!)

Howdy All,
After going back into Lightroom/Preferences for the thousandth time, all of a sudden instead of having PhotoshopElements11.exe as the only logical choice, I now had a folder within the Adobe folder called Photoshop Elements 11 (that had its own special Adobe folder icon) and within that folder was no longer "Photoshop Elements11.exe" but now "Photoshop Elements Editor"! That, of course, was what I was looking for all along. Once that was selected within Preferences, Elements now pops-up with an image ready for editing. I'm not sure why Photoshop Elements Editor is now a choice when it wasn't last night. I had already performed re-installs of both products, several re-boots etc. and never had Editor as a choice. I hadn't even shut down my PC overnight either! I was beginning to think that Editor was only a Mac term and that Win7 used some other name that I had yet to discover. Maybe my PC was just waiting for 2013 :-). All is well.

I am using Lightroom 5 and am hapy about it, but recently I hav encountered a problem when trying to edit an image in another program, i.e. Elements. I used the clone tool, saved the result and went back to Lightroom to open the image there. I did find a

I am using Lightroom 5 and am hapy about it, but recently I hav encountered a problem when trying to edit an image in another program, i.e. Elements. I used the clone tool, saved the result and went back to Lightroom to open the image there. I did find a second copy, but this is identic with the one I already had in Lightroom, and I can see noe result of the clone process.

At the moment I would say it is uncertain whether Acrobat is completely ignoring the change, or whether the changes you are making aren't affecting the ink density. I have a suggestion for a test you could make to see which is the case.
When editing in Photoshop just add a box or mark on the image, for your tests.
- If this box does not appear in Acrobat, you know Acrobat is not seeing the edit
- If this box does appear in Acrobat, you know the problem is that your tool for changing ink densities is not taking effect.

How can I add a title and ALT text to a JPEG image in Elements 11 for MAC?

Does anyone know if there is an easy way I can add a title and ALT text to a JPEG image in Elements 11 for MAC?
Very grateful for any help here.

Hello
The Arrange menu is your friend.
You may select the arrow then "Bring to Front".
Yvan KOENIG (from FRANCE vendredi 19 septembre 2008 17:49:50)

Cannot Open a JPEG image as a Camera Raw file in Elements 5.0

I tried opening a JPEG image, using "Open As" function into Camera Raw in Elements 5.0 Editor and I receive a "program error" message. How can I change settings or otherwise enable Elements 5.0 to open a JPEG into Camera Raw?

The latest version of ACR which is compatibe with Elements 5 is ACR4.6. You can download it fromhttp://www.adobe.com/support/downloads/thankyou.jsp?ftpID=4034&fileID=3758
I think the Adobe site says 4.5 was the last forElements 5, but I know 4.6 works. ACR5 needs Elements 7(or possibly 6). Good luck
John

Will Elements or lightroom batch autorotate jpeg images losslessly?

Similar Messages

Maybe you are looking for