Will eMac or iBook DVDs intall Tiger on other machines ?

My Tiger DVD has a crack in it and it wont mount, and I need to install Tiger on a new drive.
Can I use a eMac or iBook Restore DVD to install TIger on a G4 or a Powerbook ?
I wouldn't necessarily need to boot from the DVD as I have Tiger on my boot drive/s, unless the DVDs require you to boot from them to be able to install....so I don't know if there's an issue.
(I just dont want to have to buy another set of Tiger DVDs since Leopard is coming out soon.)
Thanks in advance.
Joe
Powerbook G4 Mac OS X (10.4.9)

You could clone the bootable drive to the new drive with a backup utility like Super Duper or Carbon Copy Cloner.
I don't think that a OS DVD that came with a computer will allow you to install on another type of computer. Although I don't think there's a hard and fast rule about that. Typically the restore DVD will restore the OS and all the bundled applications and hardware specific drivers.

Similar Messages

Power mac g5 will not boot to dvd at all any ideas?

Power mac g5 2.3 late 2005. Leopard 10.5 installed on drive and boots ok to hhd.
how ever i need to go back to tiger 10.4.4 or later for my music hardware to work correctly..
Sooo i purchased a Tiger 10.4 black retail disk and it will not boot to it in any way all I end up with is a kernal report screen.
I have tried everything.. taking the drive out. adding a new formatted drive to install to.. no joy..just does not even look to be installing nothing..not even a spinning wheel thingy . if the disk was too early eg before late 2005 would it act like that and not install?
I'm lost here lol.

Hmmm, something else is going on I guess...
The dvd is black with the X on it and has this number on it - 2Z691-5305-A
Apple Mac OS X 10.4 Tiger (Full Install) DVD Retail Version
Item #:
MA453Z/A 1005166
Compatible with eMac (2005), iBook G4 (Late 2004), iBook G4 (Mid 2005), iMac G5 17-inch (ALS), iMac G5 20-inch (ALS), iMac G5 (17-inch iSight), iMac G5 (20-inch iSight), iMac (Early 2006 17-inch), iMac (Early 2006 20-inch), Mac mini, Mac mini (Late 2005), Mac mini (Early 2006), MacBook Pro, Power Mac G5 (Early 2005), Power Mac G5 (Late 2005), PowerBook G4 (15-inch Double-Layer SD), PowerBook G4 (17-inch Double-Layer SD).
Also...
Mac OS X Tiger 10.4 Drop-in Install Hardware Bundle (CDVersion)
Item #:
2Z691-5306-A 1002481
Compatible with eMac (2005), iBook G4 (Late 2004), iBook G4 (Mid 2005), iMac G5 17-inch (ALS), iMac G5 20-inch (ALS), iMac G5 (17-inch iSight), iMac G5 (20-inch iSight), iMac (Early 2006 17-inch), iMac (Early 2006 20-inch), Mac mini, Mac mini (Late 2005), Mac mini (Early 2006), MacBook Pro, Power Mac G5 (Early 2005), Power Mac G5 (Late 2005), PowerBook G4 (15-inch
MA453Z/A  Disc 1 - 2Z691-5306-A  Disc 2 - 2Z691-5307-A  Disc 3 - 2Z691-5308-A  Disc 4 - 2Z691-5420-A  Disc 5 - 691-5145-A, Ver 2.0   The iwork cd is 603-6242.
http://www.welovemacs.com/2z6915306a.html

EMac External LACIE DVD Drive not reading.

eMac External LACIE DVD Drive not reading.
eMac 700 MHz running OS X 4.4
Came without DVD or modem internal
Has 256mb memory
Bought a used Lacie 1394 Firewire DVR External.
Was able to burn DVD’s and CD’s with Toast 6 Light.
Cannot find the “DVD Player” on the hard drive.
It will read data DVD.
eMac will not read any movies burnt or bought.
I was told I probably need more memory?
Thought running IDVD would fix the problem.
No Soap.
This machine was giving external modem problems before Tiger was installed.
Before we spend more money or just get ride of the eMac.
What is the DVD problem?
This same Lacie burner reads and writes DVD and CD fine with our iMac 450 DV 320mb memory. Running 9.2 and X.3

OS X 10.3.x / 10.4.x natively support data burning to external DVD drives but video payback requires software such as iDVD which isn't installed by default on models without an internal DVD drive (the installer sees no internal drive and thinks it's unnecessary). Try downloading VLC Player and see if that will let you play movies.

Trying to do an erase and install on an IBook with original Tiger Disk

Hi, I just bought a used IBook from a friend, got for super cheap and knew I was taking a risk since it wouldnt start up.
I'm not even sure if its a G3 or G4 IBook, its white and it all it says on the laptop is IBook Model number A1007.
Anyway, it didnt come with any disks so I took my Install disk from my G5, the main Tiger disk and ran disk repair and permissions and all of that, it didnt find any issues with the disk.
So I chose to do a complete erase and install which appeared to work fine, but when I start it up it starts the setup process where you enter in your name, address and all that and I get to the part where I go to enter my apple ID and thats right about where the laptop freezes every time. The screen kinda flickers for a second and then it is seized up completely.
any ideas on how to resolve this?
Do I need to track down an original install disk for an IBook G3 or G4 or is it the same thing as I am using now? If I need an install disk for my specific model where can I get one?
Thanks,
Brown.Recluse

Hi brownrecluse;
You can't use the G5 install media on the iBook because they are hardware specific. You will need to get the retail Tiger install media to do that provided the iBook meets the mimimum requirements of Tiger.
Besides that installing again would be illegal anyway.
Allan

Will a Refurbished iBook come with iLife '06?

I am looking into a refurb iBook. Has anyone recently purchased one and if so, does it come with iLife '06?
Thom

Hi John,
After reviewing the policies and doing some research,
the refurbished iBooks are not mentioned. Apple
considers their refurbished products as good as new
for the most part, but you will find your iBook does
not fall in the the qualifying family part numbers. I
suggest that you call Apple or go to your local Apple
Store and see what they will do. I am sorry if I
mislead anyone, there is nothing regarding
refurbished computers in the policy.
Here's an update:
I called Apple customer service last week to ask if my refurb iBook qualified for iLife up-to-date. The person I talked to spoke to his supervisor who said that refurbs didn't qualify because they were "used." I mentioned that some posters in this forum who ordered refurbs were getting iLife '06 either installed or on a separate DVD. So he put in an order for me, attaching it to my original iBook web order (to verify that it was purchased after iLife '06 was released). I just received it today, no charge.
So score 1 for the squeaky wheel!

Will software restore allow DVD region change?

Hi All,
I've been offered a 14" iBook G3 900 in decent condition (immaculate display). However, the DVD is set to the wrong region and cannot be changed as the 5 changes have been used up.
If I do a complete system restore of 10.4.11 will it reset the DVD so I can change it? I know this is an old issue, but I've been given conflicting advice so just wanted confirmation.
Many thanks.

BurtieB wrote:
Hi, that's what I thought.
Someone suggested I 'flash' the drive but I've read that can kill it completely.
I thought VLC doesn't always support any-region viewing? Does it depend on the hardware?
Yes it depends on the hardware.

DVD Drive will not recognize any movie DVD disk in the drive - thus will not play any dvd movies.

HP G71 449WV dvd drive will not recognize any dvd disc that has a movie on it. Will not play movies, keeps saying to insert disc when there is a disc in there. It will recognize a dvd data disc or a blank dvd, it just will not recognize any dvd movies. I've tried the microsoft fix it, downloaded new codecs, using different dvd playback software but none of that works since the drive will not recognize there is even a dvd movie in the drive. Computer is out of warranty.

Hello crollinsphoto1, welcome to the HP Forums.
It appears that you're not able to play movie DVD's in the DVD player in your notebook. I will try to assist you with this.
I'd recommend starting with this document:
Resolving DVD and Blu-ray Movie Problems (Windows 7).
Also, are these purchased DVD's or burnt DVD's?
Do the movies play in other sources? (DVD player, other PC)
Let me know how this goes.
Thanks.
I worked on behalf of HP.

I live in the UK but visit the US regularly. The price of a new MacBook Pro is much less in the US, and is where I plan to buy one. However, I have read that a US machine will not play UK DVD's. Is this true and if so is it possible to change the codes?

I live in the UK but visit the US regularly. I plan to buy a MacBookPro in the US but have read that it will not play UK DVD's. Is this so? If so, is it possible to change the codes?

All modern & new Macs can play both PAL and NTSC DVDs. I do it all the time and it works perfectly.
The DVD drive is set to its first region code when you first play a DVD in it. So when you buy a Mac, whatever type of DVD you play first will determine the initial region code that is set. If it's a PAL/Region 2 DVD it will set the DVD drive to region 2.
The only thing you have to watch out for is if you have a collection of DVDs that have different region codes. In those cases you may be faced with changing the region code in the DVD drive in order to play one or more of the DVDs; and as others have noted there is a limit to the number of times you can change the region code (most modern DVD drives allow up to 5 changes; the 5th change becomes the permanent change). This is due to industry licensing practices.
If you have DVDs that are Region 0 or All Regions you don't have to worry about region codes.

Satellite A660 - DVD drive will not recognise some DVDs

I have a new Satellite A660-17E with a HL-DT-ST DVDRAM GT30N drive, running Windows 7 64 bit.
The drive will read most DVDs. Commercial DVDs (region 2) are fine. However, there are problems with DVDs recorded using DVD recorders. DVD+R recordings using a Philips machine work fine. DVD+R and DVD-R using a Sony HDX RDR 1095 machine do not work.
I'm hoping that the drive is ok and that this issue can be resolved by adjusting some setting or other?
Any ideas?

It is most likely the issue is with the brand of dvd's you record with. as stated in the manual not all brands of recordable media are guaranteed to work with the dvd drive.
Also the sony recorder, i had a similar problem when playing the recorded dvd on another dvd machine, i found by adding a little more recorded info from the other machine onto the dvd it played fine after that. If you use DVD+R on the sony , record something on the laptop to the same dvd and then see if the dvd will play on the laptop.

Am running Tiger 10.4.11; just got Snow Leopard 10.6.3 (regular OS disk, not an upgrade); when I install Snow Leopard, will it wipe everything? overwrite Tiger? Do I need to make backups of applications and files to reinstall after Sno Lprd loads? thx!

Am running Tiger 10.4.11; just got Snow Leopard 10.6.3 (regular OS disk, not upgrade). When I install Snow Leopard, will it wipe everything? overwrite Tiger? Do I need to make backups of applications and files to reinstall after Snow Leopard Loads? thanks!

Hi Donald,
No it doesn't erase anything by default, it does what we used to call an Archive and Install feature, which can give you a new OS, yet preserve your files and settings if you have enough room on your HD...
http://docs.info.apple.com/article.html?artnum=107120
But it does it automatically unless you specifically erase the Disk, but will replace Tiger completely for the OS & several Apple Apps like Safari, Mail, etc, yet preserve your old settings for those!
If you think you may need Tiger to run any APPs that do not work in SL/10.6, then clone or backup first.
I would recomend 2 things before installing though...
Make sure you have enough RAM & HD space.
Snow Leopard/10.6.x Requirements...
General requirements
   * Mac computer with an Intel processor
    * 1GB of memory (I say 2GB at least)
    * 5GB of available disk space (I say 30GB at least)
If it's a core Duo & not a Core2Duo, then it'll only run in 32 bit mode.
"Try Disk Utility
1. Insert the new Mac OS X SL/10.6 Install Disc, then restart the computer while holding the C key.
2. When your computer finishes starting up from the disc, choose Disk Utility from the Installer menu. (In Mac OS X 10.4 or later, you must select your language first.)
Important: Do not click Continue in the first screen of the Installer. If you do, you must restart from the disc again to access Disk Utility.
3. Click the First Aid tab.
4. Select your Mac OS X volume.
5. Click Repair. Disk Utility checks and repairs the disk."
http://docs.info.apple.com/article.html?artnum=106214

How do I separate short movie clips loaded from my digital camera to iPhoto 11 at the same time pics are downloaded and how do I get those video clips to a dvd that will play on a dvd player

When loading pics to iphoto 11 from my camera, occassionaly it will include some video clips with the description of Movxxxx. I wonder if someone could direct me to some straight forward instructions as to how to transfer these video (movie) clips, which now exist in iphoto, to a dvd that will play on a dvd player as one might expect to see a video play, including the audio that was captured at the time of filming.
Thanks in advance for any assistance you can offer this novice.

You need to open iMovie and it will have a event library called iPhoto Videos, click on that and the videos will load in the window next to it, then you make a new project in iMovie. Then open iDVD and make a new project then import the movies to the program then burn to a DVD..

DVD-R discs will not play on DVD Player

The DVD-R discs I made will not play on DVD Player Version 4.0.
I transferred VHS to DVD-R using an RCA VHS/DVD Recorder. The discs played well in 3 different DVD players but will not play on my i-book.
Please help?
New At This
i-book G4 Mac OS X (10.3.9)

In a nutshell the problem is the fact that the Software used by the RCA recorder is for PC.
When recording DVD's the software that is available varys greatly.
Some of the top of the line software gives options to burn PC only, MAC only, and PC or MAC combined.
It was also brought to your attention to use VLC Player on your Mac the firmware that is used with this player will sometimes allow for playing DVD's that were burned on these VHS to DVD Burners.
Here are a few tips that affect reading and writing DVD. This link is only a small amount of what can and does affect, I suggest you do a Google search to learn all you can.
http://docs.info.apple.com/article.html?artnum=25402
Cheers Don

IMac will not play the DVD that I have made on imovie and burned on iMac SuperDrive ?? (DVD plays fine on household DVD player and also play fine in Toshiba laptop ) Why not on the iMac - anyone know???

iMac will not play the DVD that I have made on imovie and burned on iMac SuperDrive ?? (DVD plays fine on household DVD player and also plays fine on Toshiba laptop ) Why not on the iMac - anyone know???

There are many reasons this could be the case but whether an optical disc can be read or not is a function of:
The reflective media layer of the disc
Whether the burned disc was a DVD-R, DVD+R, DVD-RW, DVD+RW
The brand, model, and production lot of the disc
The specific frequency of the Write lasers that burned the disc
The specific frequency of the Read lasers that are attempting to read the disc
Are the Read lasers in the drive working (it is common for one set of lasers in a drive to fail while others continue to work)
How old are the Write and Read drives (laser frequencies change with age)
Is there dust on the read laser
Is there dust on the read lens
etc.
At one time it was estimated that fewer than 80% of all burned discs were readable in 90% of the drives. That has, I believe improved over time but at the same time it seems the faillure rate of lasers in the drives has increased but that may simply be the result of how many different read and write lasers there are in today's superdrives. Fortunately todays drives are a lot less expensive the replace -- now that Apple no longer installs optical drives in their computers.

Im making a photo slide show using imovie. how will i make a dvd copy that can play in both pc and dvd player. i dont have an idvd anymore. m using a mbp early 2011 osx 10.8.5

im making a photo slide show using imovie. how will i make a dvd copy that can play in both pc and dvd player. i dont have an idvd anymore. m using a mbp early 2011 osx 10.8.5.
after making the photo slide show, i clicked share>export movie. after which i burned using toast. the file became a .mov. i tried playing it in my mac and it worked. my fear now is will it also play in a regular dvd?... i read from google that mov files won't run in dvd players. what format should i convert it to so it'll play in a dvd player. can you suggest a faster way i can burn my projects for it takes me almost an hour to export. im going to make 28 slideshows for my kids in school. *=( if i need to do this process 28 times, i may not be able to finish it on time. please suggest a software or an alternative as to how i should do this... m more comfortable using imovie than iphoto. thanks and i hope to hear from someone soon *=j

Thank you QuickTimeKirk...used toast to burn project... my project was in .mov, i tried to play it a dvd player, it did play... will try again tomorrow using another dvd player just to be sure it'll will really work with dvd players. thank you again for your reply *=)

What is the best way to back-up and load Hi-8 video onto my i-Mac so I can edit it on i-movie? A camera store will convert it to DVD for $32/120min.ll

What is the best way to back-up my Hi-8 video tapes and then load them onto my i-Mac so I can edit them on i-movie? A camera store will convert them to DVD for $32/120min. Will I lose a lot of quality that way?

Quality is not much of an issue with Hi8, the main issue is age of the tapes. The older the tapes, the more degraded the images are going to be. Regardless of how you transfer the video, the quality is going to be pretty much the same.
The "best" way depends on how valuable the images are to you and how many tapes you have. I did a similar project last winter with a collection of 14 Hi8 tapes that dated from 1994 to 2002. I bought a converter bridge (Canopus), maximum RAM for my Mac, and a huge hard drive. I also decided to get Final Cut Express because it had more ability to enhance the pictures after downloading them. I am very happy with the results, but it cost me nearly $1200 for the upgrades, equipment, and software.
The only other thing to consider is to be sure that if you go with an outside vendor (like the Camera Store) that the files they provide for you will be in a format that iMovie can recognize.
Good luck.

Will eMac or iBook DVDs intall Tiger on other machines ?

Similar Messages

Maybe you are looking for