Will FCE HD support HVX200P DV (tape) capture?

Will FCE HD support HVX200P DV (tape) capture? The DV tape side of the HVX200P doesn't "communicate" via 1394, and I understand the P2 side of the camera is not supported. I've checked all pre-sets per the camera's manual.
Thanks,
BLCofCA

Should support the tape side of DV @ 1080i.
There are many switchable settings in the camera menu and most won't work directly with FCE and trancoding with a third party app would be required.
Here is a list based on NTSC:
Shooting formats (1080/60i, 1080/24p, 1080/30p, 720/60p, 720/24p, 720/30p, 480/60i, 480/24p, 480/30p)
Variable frame rates in 720p mode:
12, 18, 20, 22, 24, 26, 30, 32, 36, 48, 60fps
Recording formats (DVCPRO HD / DVCPRO 50/25 and DV)
You need to test the tape DV options only.
Also the FCE Easy Setup will need to match whatever the camera is outputting before capture.
Al

Similar Messages

Will FCE 4 Import Analog 8mm Tapes (unlike iMovie '08)

Hello--
I've had a heck of a time importing my older analog 8mm tapes onto my MacBook and was wondering if dropping bigger bucks on FCE 4 will help.
Since iMovie '08 for some reason won't import analog 8mm tapes from my Sony TRV-330 Digital8 camcorder, I've had to import the tapes using iMovie HD. The problem is then I have to save the iMovie HD project before I can import the video into iMovie '08 where I want to tag and edit it...and this takes a lot of extra time (hours per tape).
On other discussion boards, people have suggested using other video importing applications such as Vidi, iDive, and QuickTime Pro. The first two didn't seem to work out for me, so I just spent $30+ to get QT Pro...that was a mistake because the video and audio quickly got out of synch which was completely unacceptable (some of my older tapes have periodic video and audio dropouts due a problematic camcorder at the time, which I understand can cause that problem...but it didn't seem to be a problem for iMovie HD).
So, since I've read on these FCE discussion threads that FCE uses QuickTime it makes me wonder if I'd have the same video/audio synch problems in FCE (if it even would import analog 8mm video at all).
BOTTOM LINE: Has anyone successfully imported analog 8mm videotapes from a digital camcorder into FCE 4? I'd really like to be able to catalog, tag, and edit ALL my tapes (analog 8mm and Digital8) in iMovie '08 (but am willing to try to do it in FCE 4 if that's a better comprehensive solution). When will Apple fix iMovie '08 to make the lives of those of us who want to transfer old analog 8mm tapes easier??

Thanks for the response, M.R. I didn't know QuickTime was also the import engine for iMovie HD...if that's the case, I don't know why iMovie HD would import my analog 8mm tapes while iMovie '08 doesn't (assuming iMovie '08 also uses QuickTime as the import engine).
I haven't really considered a converter box since the Sony TRV-330 camcorder does the analog to digital conversion...seems like it'd be unnecessary. Do you think there's the possibility that the output from a converter box would look different than the output from my digital camcorder to iMovie '08?
--Bill

Is it true that After March 30, 2015, AOL will no longer support your ability to sign in to the iTunes Store, App Store, or iBooks Store or did I just receive a phishing email?

I just received the following email.....Is this legit? Makes no sense.
Dear iTunes Customer,
Our records indicate that you have been using your AOL Username to sign in to the iTunes Store, App Store, or iBooks Store.
After March 30, 2015, AOL will no longer support your ability to sign in to the iTunes Store, App Store, or iBooks Store. In order to continue using store features, including the ability to access your previously purchased content, you must transition from signing in with your AOL Username to signing in with an Apple ID.
To make this transition, simply sign in once more with your AOL Username to iTunes on your Mac or PC. You will automatically be taken through a few short steps to complete the process.
When the process is complete, your new Apple ID will allow you to continue to purchase and download music, movies, TV shows, apps, books, and more. Additionally, your Apple ID will allow you to access other Apple services, such as iCloud and the Apple Online Store.
This transition does not affect any AOL services you may be using with your AOL Username.
AOL Usernames which have not been transitioned to Apple ID will permanently lose access to the iTunes Store, App Store, and iBooks Store after March 30, 2015. Apple will be unable to provide support for AOL Usernames which are not transitioned by this date.
To learn more about this transition, visit support.apple.com/kb/HT204268.
Regards,
The iTunes Store team

The link that appears in the copy in the OP does not go to an Apple site, it is something to the effect of newitunes.com, whereas the text tells you it is an Apple support document.
However, if you take the text of the support document listed, I put it in my browser and it does lead to a legit Apple Support document about coverting. Convert your AOL Username to an Apple ID - Apple Support Seems this needs to be done by March 31, 2015, as AOL will no longer allow users to use their AOL identification.

I have 2 MacBooks at home that back-up to a Time Capsule. I'd like to buy an external Thunderbolt drive at work to have as an additional back-up. Will Time-Machine support autobackups to 2 different devices?

I have 2 MacBooks (1 Air and 1 Pro) at home that back-up to a Time Capsule. I'd like to buy an external Thunderbolt drive at work to have as an additional back-up (so that were there to be a fire/water damage/etc) I would not lose both the computer and the backup.
Will Time-Machine support autobackups to 2 different devices?
I'd like for it to be able to backup to an external Thunderbolt drive attached to my thunderbolt display when I dock the MacBook Air to it.
Does anyone know if this will occur automatically, or if I will have to manually select backup disk?
thanks

Yes, with Mountain Lion you can do this, but I will leave the explanation to Apple Support Communities contributor Pondini:
34. "Rotating" Time Machine backup disks

When will Podcast app support playlists?

Anyone know if the Podcasts app will eventually support playlists since apparently the Music app will no longer support podcasts in iOS 6? I like watching video podcasts on my iPhone at the gym (esp sine the music app on the iPad won't do video playlists), and do not want to have to keep choosing a new podcast whilst working out.

I should note that there is a list view in the podcast app, but for some reason it is in reverse chronological order (newest first). This order won't work for die hard podcast listeners. The list should be in chronological order, otherwise you end up having really old podcasts linger at the bottom of the list.
In my original post I say my list is in reverse chron order, but I mean chronological order.
In iTunes you can go in and change Media Kind from podcast to music as a work around. It's not ideal though, becuase then the track gets moved out of the Podcast section in itunes and you lose feautures like keep only unplayed episodes and keep last x episodes etc. Again one could probably write an applescript, toggling the media kind depending on play count, but seriously, what a hack.
Please, please pretty please add playlists to the podcast app so that it uses the smart playlist from iTunes.

Currently running Snow Leopard with iWeb will Mountain Lion support it?

Currently running Snow Leopard but wish to upgrade to Mountain Lian to support new iphone etc. Only problem being that I've just set up a small online page using iweb through an ftp server. will Mountain Lion support any changes that I make to my pages and can it then publish trhough the outside server?

iWeb is supported in Mountain Lion. That said you need not upgrade to ML to support new iPhone 5. What OS are you using? All you need is iTunes 11.

Will mountain lion support safari 5.1?

will mountain lion support safari 5.1?

I've done the SMC reset as well as the PRAM and NVRAM, no dice.
After going through Optoma's support just to make sure, it couldn't be anything with the projectors I called Apple and spoke with a Senior Advisor. Due to the fact that the VGA splitter works with my mid-2011 iMac, but not with the 2008 iMac his best guess is that the error must have something to do with the handshake protocols that allows the iMac to detect that there is something attached to the external display. Unfortunately there is no way to 'brute-force' the iMac to send video without receiving a handshake confirmation. The "Detect Displays" option only makes the iMac look for a display, but it won't send the signal without a response.
The option at this point is to either find a different splitter and try that, or downgrade the iMac to Leopard (which requires a full wipe and re-install.
Not the solution I had hoped to find, especially when the iMac, VGA splitter, projectors, and presentation software are individually listed as Mountain Lion compatable.

What will iOS5 features will not be supported on a 3GS?

Everytime a new iOS comes out, the feature set that is supported on the iPhone 3GS gets watered down and watered down. Yeah yeah yeah, I know I need to update my hardware, but it just isn't in the budget this month.
Other than some of the more obvious things, like Siri and mirroring, what features in iOS5 will not be supported on the iPhone 3GS hardware? I thought someone would put out a list, but there is nothing in the wild yet.

A better response: http://support.apple.com/kb/HT4959
Learn which iOS 5 features your iPhone supports:
iOS 5 Feature
iPhone 3GS
iPhone 4
iPhone 4S
Notification Center
√
√
√
iMessage
√
√
√
Newsstand
√
√
√
Reminders1
√
√
√
Twitter
√
√
√
Photo editing
√
√
√
Wireless setup and activation
√
√
√
iCloud
√
√
√
Wi-Fi sync
√
√
√
FaceTime2
√
√
VGA/HDMI out3
√
√
HDR (High Dynamic Range) photos
√
√
Siri
√
AirPlay Mirroring
√
Notes:
Location-based reminders available on iPhone 4 or later
FaceTime requires a Wi-Fi connection. FaceTime may not be available in all countries or regions.
Requires the Dock Connector to VGA Adapter or Apple Digital AV Adapter, sold separately. Video Mirroring only available on iPhone 4S.
For a list of additional features and capabilities available on all iPhone models, see the iOS 5 Software Update page.
Message was edited by: CWulf
Message was edited by: CWulf

HT202157 When will Apple TV support Amazon Prime Instant Video?

When will Apple TV support Amazon prime instant video?

Most of the YouTube video subtitles are inserted by flash. Unfortunately, ios OS products don't support flash. If you do want to play them with subtitle, maybe you can use a video converter to help you convert YouTube videos to Apple TV. The only thing you should make sure before the conversion is that the videos that you download is bearing the subtitle, then the converted files would have the substitles as well. Hope that would help.

Will Radeon x800xt support 30" ACD plus a 23"ACD

I have a dual 2ghz G5 tower with an ATI Radeon x800xt graphics card. Will the system support two Apple Cinema Displays simultaneously: a 30" plus a 23""?

According to ATI, the X800XT has one dual link DVI port (for the 30" ACD) and one ADC port (for legacy Apple displays). If your 23" display is the newer aluminum version, you'll need an adapter.
Hope this helps!
-macmatt
1 GHz TiBook, 768 MB RAM Mac OS X (10.4.3)

Whole tape captured but only 2/3's in final cut

I have captured a two DV tape which are about 1 hour and 2min the whole tapes captured without any problem but in the browser one tape (captured file) only shows the the captured footage is only 42 min the rest does not show up. When i play the clip in quicktime the whole 1 hour and 2min are there. The other tape which has the same length is fine.
I did quiet a lot tapes like that never had a problem, i did upgrade to 6.02 an run Leopard 15.1
I do not have any limitations set in the preference files

Make sure there's no in and out points set in the offending clip before you determine it's length. Or type on x with the clip in the viewer and see what the in to out is.
Jerry

Will Oracle 9i support RedHat 7.2 Linux on Alpha (DEC) ?

Will Oracle 9i support RedHat 7.2 Linux on Alpha (DEC)?
And if they will support it - when will that happend?
Kato Indrevoll
[email protected]

Oracle/Linux is available for Intel Plattform only. There are no known plans to support other architectures with linux.
Regards

Europeans claim that Apple announced it will no longer support Aperture after December of 2014. Is there any truth to that?

Two of my European friends who use Apple products extensively, and Aperture exclusively for their photography needs, have just told me that Apple in Europe announced they will no longer support Aperture after December 31, 2014. They are quite stressed over it. My question is simply this:"Is there any truth to this rumour, and does it effect us here in North America?" If so, is there any new product from Apple or a third-party group to replace Aperture?
Just curious, as I would hate to give up my many huge Aperture libraries and transition to some other solution.
Thanks,
....Tahunga

Apple has announced, that it will stop the further development of Aperture. It will be updated to work with the new MacOS X version Yosemity, but then there will be no newer versions. The new Photos.app to come with Yosemity will be the successor for both Aperture and iPhoto.
See for example this page: Aperture is Dead. Long Live Photos! | ApertureExpert
You will find a few discussions on this topic, when you browse this forum.
Re: What no more new Aperture software? Why?

Who will you be supporting at the Tailgate Party?

So we now know who will be playing in Super Bowl XLVII, San Francisco 49ers and Baltimore Ravens.
Who will you be supporting at the Tailgate Party which is kicking off BrainShare 2013?

>>>
> Hey Paul Lamontagne,
>
>>but I'll take Baltimore.
>
> I've been there, and you can have it, but only if we get to keep the
> National Aquarium. Deal?
Geez I mean I chose Baltimore Ravens to Win...I've been only to their
Airport and you can keep it ...
Paul

Will Native Extensions support C#?

The title pretty much covers it, but to go into more detail:
Various blogs and spec pages have indicated that C and Java are the 2 main native languages used. However, does that actually mean that Native Extensions is limited to this?
In an article here: http://www.adobe.com/devnet/air/articles/developing-native-extensions-air.html
Daniel says 'Although you may be interested in targeting Objective-C, C#, C++, C, or some other language'. Does this mean that C# will be supported? And if so, does that mean that the open source variants Mono and Portable.NET will also be supported for UNIX?
Thank you,
Dominic

You have to use C to interact with the ActionScript extension classes, but the rest of the extension can be written in any language that you can access from the C code on the specific platform. Objective C, C++, and C# should be fairly straightforward (but I'm not particularly knowledgable on the subject).
Have a look at the .net image encoder example here: http://www.adobe.com/devnet/air/native-extensions-for-air.html for an example of how to use .net in an extension.
(Java can be used directly on Android and Blackberry Tablet OS.)

Will FCE HD support HVX200P DV (tape) capture?

Similar Messages

Maybe you are looking for