WILL FCP 7 Recognize older camcorders like Panasonic PVGS120 for capturing?

I wanted to find out if FCP 7 has the ability to read all older camera models. If I can upgrade to FCP 7 (for under $300) and my old camera (Panasonic PVGS120) can be recognized by FCP software/drivers then I will not need to go out and buy a new HD camera just yet. Can anyone confirm this? The Panasonic PVGS120 was a gift and did not come with a driver for mac only PC/Windows. Right now I can not capture my footage onto my mac via fire wire & camera. I have to transfer my tapes to a friends HD camera to be able to import and capture my footage. If not I'll just have to break down and get a new HD camera for footage and importing, either way it's a win-win. PLEASE HELP!!

I own this camera, I just did a test and it works fine with the newest FCS.
All should be well for you!

Similar Messages

I am running 10.6.8 want to upgrade 10.8 will i loose some older operations like iweb?

I am running 10.6.8 time to upgrade 10.8 will i loose some older operations like iweb?
Also if i load Mavericks will I still be able to revert back if I don't like the format?

Upgrading from 10.6 will loose Rosetta and therefore, all legacy software that relies on Rosetta. That includes things like MS Office versions older than 2008.
You need to make a backup of your content, on an external drive, before updating so you have a means for reverting if necessary. To revert to an older version of Mac OS X you have to erase the hard drive and then reinstall the older Mac OS X and all content. That is easiest if done from a complete backup of your current system.

I cannot get CS6 to recognize my Sony DCR-TRV340 camera for capturing video from that camera. CS6 c

I cannot get CS6 to recognize my Sony DCR-TRV340 camera for capturing video from that camera. The CS6 capture box keeps putting up a message that capture device is off line. The Sony DCR-TRV340 camera is not listed in the CS6 Device Type list in the CS6 DV/HDV device control settings box of Sony cameras. I've downloaded what I think are the correct drivers for the TRV340, and when I plug the camera into the computer, the computer shows it listed in the devices and printers box, but CS6 will not recognize it. Do I need to install these drivers into a specific folder in the CS6 program? If so, where do I find these drivers in the windows 7 professional operating system, and into which CS6 file folder would I copy them to?

Most camera's are not listed in Device controle, set it to Sony and generic. Yours is very old its a Digital 8 camera (I still got a TRV210). Johns second link wont work with your camera.
You do not need to download drivers nor do you need to install anything. Most likely its the Legacy driver.
Read though this document.
http://kb2.adobe.com/cps/828/cpsid_82848.html
General rule is connect camera to pc wait until windows reconigzes the camera.
Fire up Premiere and capture.
Never connect the camera to pc when the camera is on.

Will FCP Run on Older Mac Towers

Can I run FCP on a Macintosh G5 1.8 GHz PCI-X tower? Would a Power Macintosh G5/1.8 DP (PCI-X) work any better?

How far back can I go where it won't hurt me? I don't have enough money to purchase a new computer. I was running everything on an MacBook, but I fell in the slushy NYC snow and it slid out of my bag. It is fried and finished. I'm trying to purchase a refurbed tower unit. I found G5 towers for $350. I realize that is not the best scenario, but it is all I can afford. That's why I originally wanted to know if I could run fcp v6 on a G5 tower that is not intel based.
My reasoning was that a few years ago that was all we had to work with. So why not revert back and make lemonade from the lemon situation I find myself in:)

I have new hard drive in macbook pro(08) and have SATA cable with external power source to old hard drive (10.5.8)via. USB port and newer drive(10.6.8) will not recognize older drive..Do I need to partition newer drive with older disk to recover data?

I have new HD 750GB Hybrid in 2008 Macbook Pro 17" w/ Snow Leopard 10.6.8 connected to old Hard drive(250GB that had 10.5.8 on it at time of failure) via SATA cable to USB port with external power source.. Computer not acknowledging old HD at all in Disk Utility or otherwise (that I'm aware of)..Do I need to partition New HD and load old(10.5.8) onto partition to recognize older drive for data recovery? Thanks Wayno08

You do not need to load 10.5.8 onto your new drive in order for a 10.6.8 system to see the contents of a 10.5.8 system.
You might want to check out the hard drive troubleshooting bootk in the downloads section of this web site:
http://scsc-online.com
They also sell a product named Phoenix that can do OS extraction and volume copying/cloning, but to be honest I don't know if it's appropriate in this case.
I would suggest the following:
Open up Terminal.app (under utilities) and type "diskutil list" without the quotes. This is the command line version of Disk Utility. If the external drive doesn't show up at all, then it's likely not connected properly, not getting power, or just plain dead. If it shows up with only a devce name like disk0s16 but no volume it means the drive is seen, the OS just can't make sense of it.
Assuming the drive shows up, I would try to boot off the original installl disks for the system and run Disk Utility from that. I'm assuming the drive will show up. You'll want to select the option to repair the drive and then perform the option to repair the permissions.
If the unit isn't showing up, as per step 1, try a different USB port. More importantly with your unit, try it on another side of the unit if possible. If you read the book I referenced above, some of those units have I/O boards that are separated from the logic board. If the cable from the logic board to the I/O card goes bad or has problems, which isn't all that uncommon, some or all of the ports on the I/O card may appear to be bad as well. If you use a USB port on another side, it would be routing out of a completely different I/O path, so that's a potential problem.
If the drive is only seen with a device name such as disk0s16, it's likely either the index files are corrupt beyond Disk Utility's ability to see them. The only thing that I think would help would be a product named DIsk Warrior, but I can't guarantee that.
Disk Warrior can be found at:
http://www.alsoft.com/diskwarrior/
The company that I linked in the first link above also makes a product named Scannerz that does HD and system testing. The Scannerz/Disk Warrior combination make a good pair because the complement each other....Scannerz does what Disk Warriror can't and Disk Warrior does what Scannerz can't. However, at this point I'm not too sure getting a tool like Scannerz would be of much use because it sounds like the damage has already been done.
Let us know what happens.

Will FCP handle the new Panasonic PH Mode?

I was just about to buy a Panasonic AG-HMC150 camcorder, when I noticed this in the fine print of the brochure: "Collaboration to confirm compatibility with the new PH mode is now under way with Adobe, Apple GrassValley, and other partner companies."
PH Mode is Panasonic's highest bit-rate (21 Mbps) compression for their AVCCAM cameras; AVC is apparently a flavor of H264, so you can record full HD on those little SD cards.
Has anyone shot with the AG-HMC150 and tried to bring a PH Mode clip into FCP? Will FCP edit that natively, or do I have to transcode it to ProRes on the way in?
Thanks in advance, Seth Hill

Well, I went ahead and bought a Panasonic Ag-HMC150. I just tested it by shooting one short clip at 1080P 24P. The clips plays wrong in FCP!
Here are the details: I started a new project in FCP, and first I set Final Cut Pro - Audio/Video Settings to Apple ProRes 422 1920x1080 24p 48 kHz. Then I checked the Sequence Settings, loaded the Sequence Preset to the same settings: Apple ProRes 422 1920x1080 24p 48 kHz.
Then connected the camera though USB to the computer. In FCP, did Log and Transfer. The clip in the camera appeared, and I dragged it down to "Drag Media Here." The little grey bar moved across, and a Clip appeared in my Browser.
But when I double-clip the Clip in the Browser to play it, the audio plays normal speed, but the video plays very fast - looks like almost double speed. The video and audio get completely out of sync! Same thing if I drop the Clip into the Timeline.
What did I do wrong?

Help needed to sort out the FCP numbers minefield - older G5

Hi people-who-can-help
I am incredibly new to Mac computers and I have to say my experience up to yet has been anything but fun! It has been a time of confusion, great expense and constantly incorrect advice. So I do hope someone within these discussion groups can help me not throw this old G5 out of the window!!
This G5 arrived with OS 10.3 Panther loaded (including installation discs). I wanted to buy and learn to use Final Cut Pro and knew that only an older version would be suitable for this G5. I upgraded the RAM too so it now has the maximum it can handle. Not being hugely wealthy, I tried to find a copy of FCP 3 as I was told that was absolutely the latest version my G5 could handle, even with my 'new' OS 10.4 Tiger that I bought and successfully loaded.
I could not easily find an old FCP 3 for some time, them managed to buy one, but although I had asked if all serial numbers etc were present and told that they were, it has been impossible to load. The CD must be in the drive which is not a problem - as this is an Academic version there are several discs with it, so I assume it was used in a school ICT suite. The fact that I wouldn't be able to upgrade was not a problem as I simply wanted to learn the software and maybe buy a more up to date Mac and software later when funds permitted.
So I have this G5, two OS versions, a copy of FCP 3 Academic which I cannot load and people advising that I should buy Final Cut Suite as then I could use the FCP 6 and everything would be fine. One man even told me that it was clear to him that I had bought not FCP 3 but FCS 3!!
Please help. What version of Final Cut Pro can I run on this machine (PPC processors, NOT Intel) with the OS that I have? Or shall I simply launch the Mac through the window with me following after it?!

Hi Dave, & welcome to the forums!
It looks like FCP5 will work...
Macintosh computer with 500MHz or faster PowerPC G4 or G5 processor or any dual G4 or G5 processors, 512MB of RAM, and AGP Quartz Extreme graphics card; HD editing requires a 1GHz or faster PowerPC G4 or G5 and 1GB of RAM
Mac OS X v10.3.9 or later
QuickTime 7 or later
DVD drive for installation
http://support.apple.com/kb/TA23208?viewlocale=en_US
Free trial???
http://www.bestshareware.net/finalcutpro-mac.htm
Yet I bet there's some real pros over in the FCP forum that could be of better help...
Hmmm, they've changed a bunch, not sure now where would be best...
https://discussions.apple.com/community/professional_applications?view=overview

How to get FCP to recognize an animation sequence, not individual clips ?

Hello All;
Could someone tell me how to get FCP to recognize a .png animation sequence (Exported from After-Effects) ? When I place the directory or files onto the timeline, I get a project 27 minutes long, rather than 10 seconds like it should be. I know this must be easy and I'm just missing something.
Tim

You exported a .png image sequence from After Effects?
Three choices:
1) In Final Cut Pro, click anywhere in the 27 minute long timeline and type Command + A to select all the clips. Once they are all selected Control Click on any one of the selected clips, and from the drop down menu choose Duration. Set the duration each clip is supposed to be ( 1 frame? 3 frames?) and click OK.
2) In Final Cut Pro, go to the menu Final Cut Pro > User Preferences. When The User Preferences open, click on the Editing Tab. Set the Still/Freeze duration to the duration you want for each of the stills in your image sequence and click OK. You will then need to re-import the stills, and they will now each be the new duration. This does not work on the stills you have already imported- you need to import the stills again.
3) Open Quicktime Pro (Quicktime Player 7) and go to the menu File > Open Image Sequence. . .
Navigate to the first frame of your image sequence and click Open. You will be asked to pick your frame rate. Set that and click OK.
When it opens, go to the menu File > Export and the Save Exported File As . . . window will open. Choose the codec you want for your animation (Pro Res, most likely) and, determine a location for the file and click Save. The image sequence will be exported as a Movie in the frame rate and codec you chose. Import that movie into FCP to edit or composite.
MtD

HP Photosmart 8250 will no longer recognize photos downloaded from Facebook. Any ideas?

I used to download and print photos from Facebook, but the HP Photosmart 8250 will no longer recognize these files on the SD card. I believe Facebook recently updated it's photo format (incidentally, older images on Facebook still work fine). Any ideas?
I'm running Windows XP, and have not changed anything on my setup.

The troubleshooting steps in this document may help resolve the issue of black not printing. If not see the post here.
Bob Headrick, HP Expert
I am not an employee of HP, I am a volunteer posting here on my own time.
If your problem is solved please click the "Accept as Solution" button ------------V
If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Don't get timecode via firewire from FCP to Panasonic HVX200A for DV.

When I try to 'print to video' or just play the timeline for a NTSC DV sequence, I get video and audio on my Panasonic HVX200A camera, but no timecode. The timecode display on the camera doesn't move and when I 'Log and Capture' the video that I just recorded, the 'Log and Capture' just sits there displaying 'Waiting for timecode' while the tape is actually playing in the camera.
The camera setting for '1394 TC REGEN' is set to 'on' which means that the camera will get the timecode from the firewire instead of creating the timecode itself.
The 'no timecode' problem is the same for output to tape or P2 cards.
I am using the DV-NTSC Easy Setup for device control, etc.
But.... When I output an HD (720P/60P) sequence from the timeline to the P2 cards, the timecode is immediately visible on the camera's timecode counter. I can even send the DV sequence above to the HD P2 setup and the DV timecode will show up.
How can I get FCP 7 to send the timecode via firewire to my HVX200A using a DV recording setup options on the camera?

But I can send the time code from both a 720P/24P sequence and a NTSC DV sequence using the 720P/60P FCP video playback setup to the Panasonic HVX200A using the camera recording setup 720P/60P.
If I change the starting timecode for my active sequence from 01:00:00:00 to 03:00:00:00 and press play, the timecode sent to the camera displays the correct hh:mm:ss:ff starting with 03.
So you can output timecode using HD settings. And you can send a DV sequence to the same HD settings and see that DV timecode. Although, the DV frame is surrounded by black on all sides.
But why can't you output a DV timecode to a DV setup HVX200A?
Also, if you wanted to create a DV tape using the filters that burn a visual timecode to the tape, don't you need to be sure that you can send the timecode with video so that they are in sync when recorded? You wouldn't want the camcorder to provide timecode that doesn't exactly match the burned to image timecode?

HT5129 all of my albums in mobile me came from my albums in iPhoto. will mobile me recognize that, or would it place a duplicate copy back to my iPhoto?

all of my ablums in mobile me came from my albums in iPhoto. will mobile me recognize that? or would it migrate duplicates back to my iPhoto? thanks.

OT - Unfortunately, Apple hasn't made it that easy. They've tried, but didn't get there. I have been logged out of MMe from the System Preferences for months, and I am still getting the new message now every time I open iPhoto to migrate my albums to iPhoto from MMe. I deleted those photos (which I had also like fatsojung loaded from iPhoto in the first place, but now have divided some of those to separate libraries for space), and even had deleted the albums from MMe! Thought I was DONE with MMe months ago!! Now I'm getting the following message when I try to delete my MMe account from my iPhoto preferences to stop the message:
"31 albums will be removed from your IPHOTO LIBRARY."!!!! Is that a typo?? Shouldn't it say "MobileMe gallery"? As those photos are still in my iPhoto library, I certainly do NOT want them deleted from iPhoto! And why does it still have all 31 albums in there when I deleted them from MMe months ago?? I feel like I'm in a horrible loop that won't let me go!
It's just a pain if I have to let it download all those pictures into my iPhoto trash, then delete them AGAIN. And frankly I'm a bit worried that it will confuse it with my originals that are still in that library. Good thing I have Time Machine!
Any insight as to what actually happens when we click "Remove"? Thanks.

HT204782 Will there be a patch to restore Panasonic AVCHD functionality to FCPX 10.1.4 in the current version?

Will there be a patch to restore Panasonic AVCHD functionality to FCPX 10.1.4 in the current version?

je1s wrote:
What model? I'm using the AGAC-130P. Also, are you shooting at the suggested settings above or are you in 1080p at 25 or 30 fps?
I don't know what the "suggested settings" are. I always shoot at 50p.
I don't have the exact model here (520 something?), but my camera is not a professional one like yours.

Why will CS3 not recognize Pict files?

Why is it that CS3 Photoshop will not open Pict files, even after
going into Image Info and saying open all images like this Pict file in CS3.
. . . . and yet . . . .
I can open the Tiger OS application PREVIEW and open the same Pict file?
I can open any Pict file in Preview and convert to jpg, then CS3 seems to
recognize the image file and open it.
Why will CS3 not recognize Pict files?
John R

TheBlackXacto wrote:
Yes, in: CS3/Application/Plug-ins/Import/Export/Pict Resource.plugins
Oy!
The Mac Paint.plugin has to be in ./Applications/Adobe Photoshop Cs3/plug-Ins/File Formats/Mac Paint.plugin
You need to find the Mac Paint.plugin in the Goodies/Optional Plug_ins/File Formats/… then relaunch Photoshop.

If I upgrade to Mavericks will FCP 6 still work?

I have no intention of switching to FCP X but Snow Leopard is getting outdated for some applications. Will FCP 6 work if I upgrade to Mavericks?

Michael Grenadier wrote:
...I suppose that hardware drivers would be problematic in emulation also.
I got an email today from a client who's buying a new macbook and wants to run fcp7 on it. Told him he might be better off buying an older machine.
Buying an older machine is an option, but quite honestly, if your client is doing his work for professional purposes (whether for himself or 3rd parties) I would suggest that he purchase TWO older Macs (preferably the same model).
Then he can set them both up and have a backup situation when the first one fails. In the case of using a new Mac, this is not as important, as one can always run out to the Mac store, come home with a new replacement and restore their backup/clone and be up and running with little loss of time. That scenario is not possible with a used Mac.
Hardware drivers can function in Parallels, through USB, but not firewire. What kind of hardware drivers are you talking about?
Lastly, I have finally found a local source who will "loan" me his copy of FCP 6 for educational/research purposes!

Will Time Machine recognize a new RAID 1 boot volume?

I would like to convert the boot volume of my Mac Pro to a RAID 1 mirror (using a second internal hard disk) with Disk Utility. But will Time Machine recognize the RAID mirror as the boot volume it's been happily backing up and continue to back up incrementally? Or will Time Machine regard the RAID mirror as a new volume and therefore do a full backup, consuming quite a lot of disk space on the Time Machine disk? Does anyone here know?
In the past, I've discovered that even if I make a very high quality clone of my boot volume (using Super Duper), Time Machine will fail to recognize the clone and will insist on starting all over again with a full backup. I have not heard a reasonable explanation of why Time Machine does that, considering that the clone should be nearly identical to the original; it's not clear to me how Time Machine "recognizes" a volume. This makes me suspicious about how Time Machine will treat a new RAID 1 volume.
Thanks for any thoughts on this.

No you are right after my TM going slow someone said to download a widget which checks the log and it all ways checks UUID first thing.
P.S. Camelot can you please take a look at my http://discussions.apple.com/thread.jspa?threadID=1909838 Loop post again; you seemed to forget -thanks

WILL FCP 7 Recognize older camcorders like Panasonic PVGS120 for capturing?

Similar Messages

Maybe you are looking for