Will FCP handle the new Panasonic PH Mode?

I was just about to buy a Panasonic AG-HMC150 camcorder, when I noticed this in the fine print of the brochure: "Collaboration to confirm compatibility with the new PH mode is now under way with Adobe, Apple GrassValley, and other partner companies."
PH Mode is Panasonic's highest bit-rate (21 Mbps) compression for their AVCCAM cameras; AVC is apparently a flavor of H264, so you can record full HD on those little SD cards.
Has anyone shot with the AG-HMC150 and tried to bring a PH Mode clip into FCP? Will FCP edit that natively, or do I have to transcode it to ProRes on the way in?
Thanks in advance, Seth Hill

Well, I went ahead and bought a Panasonic Ag-HMC150. I just tested it by shooting one short clip at 1080P 24P. The clips plays wrong in FCP!
Here are the details: I started a new project in FCP, and first I set Final Cut Pro - Audio/Video Settings to Apple ProRes 422 1920x1080 24p 48 kHz. Then I checked the Sequence Settings, loaded the Sequence Preset to the same settings: Apple ProRes 422 1920x1080 24p 48 kHz.
Then connected the camera though USB to the computer. In FCP, did Log and Transfer. The clip in the camera appeared, and I dragged it down to "Drag Media Here." The little grey bar moved across, and a Clip appeared in my Browser.
But when I double-clip the Clip in the Browser to play it, the audio plays normal speed, but the video plays very fast - looks like almost double speed. The video and audio get completely out of sync! Same thing if I drop the Clip into the Timeline.
What did I do wrong?

Similar Messages

  • Does FCP support the new Panasonic AVC Intra codec?

    Does FCP support the new Panasonic AVC Intra codec?
    NOT AVCHD but AVC Intra?
    Will it require more rendering or converting before I can use it?
    I am looking at buying the HPX-2000 with the new AVC Intra board, recording to P2. AVC Intra is H.264 codec.

    I don't think this is supported yet.. but the camera's ability to shoot DVCPROHD certainly is.
    Jerry
    Message was edited by: Jerry Hofmann

  • Will FCP support the new Sony V1U

    I'm considering buying the soon to be released Sony V1U. Does anyone know if this camera will be supported by Final Cut right away or will we have to wait for NAB for an update?
    Thanks,
    Anne

    Might need an update to work directly with captured files and all formats it shoots (unless it uses the same protocols that the XDCAM stuff does). Sony says that if you have their HDV devices (deck) you can play thru to it apparently in it's literature. Meaning you can capture it during a playback from the camera I guess. It does record to tape too, right? Sony:
    In addition to typical 60i, the HVR-V1U offers 24p/30p progressive scan capture, enabling cinema and drama productions in its compact yet high performance unit. The camcorder also adopts the world's first 2-3 pull-down HDV recording system for storage of the 24p scanned images, keeping your existing HDV1080/60i HDV gear in action. Playback your 24p/30p scan footage using Sony HDV equipment you already have at hand, or feed it to a compatible Non-Linear Editing (NLE) system without changing your HDV deck or monitors - it’s as simple as that."
    I'd not be the first on my block to buy one before they are in circulation and someone with first hand experience has reported that there's no hitches...
    Jerry

  • Has anyone successfully connected an AEBS to the new Panasonic TVs with built-in WiFi?  If so, please describe the requirements and process.  Thanks.

    Has anyone successfully connected an AEBS to the new Panasonic TVs with built-in WiFi?  If so, please describe the requirements and process.  (TV subscription is through DirecTV and ISP is TWC.)  Thanks.

    If you wish to use the cellular capabilities of a device, you will need a SIM (unless the carrier uses CDMA which doesn't use SIMs) and you will have to pay a cell carrier. No cell company provides service for free. The only way you will get free Internet is via WiFi to a free and open WiFi access point, as sometimes is offered in public buildings or by some businesses.
    Regards.

  • Is Firefox 3.6.10 technology unable to handle the new youtube?

    Youtube made some sort of change(s) 1 day ago. Ever since then numerous links freeze up and firefox loads a "500 internal server error" page. The old youtube user interface was enforced once again. No change after disabling all my extensions. These same sites and new interface load on Chrome, Safari, Firefox4.
    Is the current Firefox 3.6.10 technology unable to handle the new youtube?

    * "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
    * "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in [[Safe Mode]] to check if one of your add-ons is causing your problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    See [[Troubleshooting extensions and themes]] and [[Troubleshooting plugins]]

  • [svn:osmf:] 13028: Fix bug where NetStream would continue playback upon completion ( due to our not handling the new STOPPED state).

    Revision: 13028
    Revision: 13028
    Author:   [email protected]
    Date:     2009-12-16 18:10:28 -0800 (Wed, 16 Dec 2009)
    Log Message:
    Fix bug where NetStream would continue playback upon completion (due to our not handling the new STOPPED state).  Injection from trait refactoring.
    Modified Paths:
        osmf/trunk/framework/MediaFramework/org/osmf/net/NetStreamPlayTrait.as

    My daughter has had her Razr for about 9 months now.  About two weeks ago she picked up her phone in the morning on her way to school when she noticed two cracks, both starting at the camera lens. One goes completely to the bottom and the other goes sharply to the side. She has never dropped it and me and my husband went over it with a fine tooth comb. We looked under a magnifying glass and could no find any reason for the glass to crack. Not one ding, scratch or bang. Our daughter really takes good care of her stuff, but we still wanted to make sure before we sent it in for repairs. Well we did and we got a reply from Motorola with a picture of the cracks saying this was customer abuse and that it is not covered under warranty. Even though they did not find any physical damage to back it up. Well I e-mailed them back and told them I did a little research and found pages of people having the same problems. Well I did not hear from them until I received a notice from Fed Ex that they were sending the phone back. NOT FIXED!!! I went to look up why and guess what there is no case open any more for the phone. It has been wiped clean. I put in the RMA # it comes back not found, I put in the ID #, the SN# and all comes back not found. Yet a day earlier all the info was there. I know there is a lot more people like me and all of you, but they just don't want to be bothered so they pay to have it fix, just to have it do it again. Unless they have found the problem and only fixing it on a customer pay only set up. I am furious and will not be recommending this phone to anyone. And to think I was considering this phone for my next up grade! NOT!!!!

  • I just received a new macbook pro. I am looking for a usb3 external storage 500 GB drive.  Some manufacturers of drives aren't for sure their drive will work with the new lion system. Does anybody have any suggestions for drives that will workw

    I just received a new macbook pro. I am looking for a usb3 external storage 500 GB drive.  Some manufacturers of drives aren't for sure their drive will work with the new  system. Does anybody have any suggestions for drives that will workw

    There seems to be a problem, just now, with the USB 3 ports on the new MBP's supporting eternal USB 3 drives. Some people have no luck at all - can't even recognize the drive - and some are reporting USB 2 speeds (those who drives are recognized). I'd call a dealer such as LaCie or OWC to see if they have USB 3 drives that actually work with MBP's with USB 3 ports. You may have to wait for a software/firmware update.
    Clinton

  • I have Photoshop Elements 9 on an iMac with OS 10.6.8. I bought a new printer/scanner and the program will not import the new scanner to replace the old one. How do I do this?

    I have Photoshop Elements 9 on an iMac with OS 10.6.8. I bought a new printer/scanner and the program will not import the new scanner to replace the old one. How do I do this?

    Thank you for your suggestions. I downloaded a more recent version of Twain, but this didn't help. I also tried closing and opening Photo Shop and restarting my computer without success. Reinstalling Photo Shop sounds like a very promising solution, but I'm  not sure I will do it. In the meantime I can scan items using a printer program. These scans open in Photo Shop. It is an extra step.

  • What heart rate monitors will pair with the new iPod nano?

    Are there heart rate monitors that will pair with the new 7th generation iPod nano?

    It's supposed to support "Bluetooth Smart" HR monitors.
    http://support.apple.com/kb/HT5479
    There are some listed here:
    http://www.bluetooth.com/Pages/Bluetooth-Smart-Devices-List.aspx

  • HT4906 i'm using an older version of iPhoto on my desktop Mac and I can't seem to control the number of photos appearing on my iPhone and iPad, will upgrading to the newer iPhoto resolve this?

    i'm using an older version of iPhoto on my desktop Mac and I can't seem to control the number of photos appearing on my iPhone and iPad, will upgrading to the newer iPhoto resolve this?

    What version do you have?
    iPhoto menu -> About iphoto.
    What goes to your iPad/iPhone is controlled in iTunes.
    Regards
    TD

  • I have a 13 inch macbook 4g 2.26ghz intel core 2 duo. will it run the new final cut software?

    i have a 13 inch macbook 4g 2.26ghz intel core 2 duo. will it run the new final cut software?

    Matey - you should be ok
    http://support.apple.com/kb/HT4728.

  • What will happen to " the new iPad " I bought 2 months ego. Now the model is discontinued . What apple will do?....really disappointing.

    What will happen to " the new iPad " I bought 2 months ego. Now the model is discontinued . What apple will do?....really disappointing.

    I just bought two new iPads a few weeks ago. If they're still in the return window they're going back. Maybe it's time to look at some of the Android tablets since all of a sudden Apple thinks the mini is a great idea.

  • Adobe aftereffects is not working on os x maverics all updates...... is dis soft. will work on the new os x yosemite.??  y apple is nt working on dis problem wen users are facing problems with new os x .....

    Adobe aftereffects is not working on os x maverics all updates...... is dis soft. will work on the new os x yosemite.??  y apple is nt working on dis problem wen users are facing problems with new os x .....

    I suggest you contact Adobe tech support or their Mac forums for assistance.

  • My old iMac and OS 10.4 will not accept the New iTunes Version 10 application and I can't get past the screen offering to download iTunes 10.  This is wrong and I need help getting past this situation. Help!

    My old iMac and OS 10.4 will not accept the New iTunes Version 10 application and I can't get past the screen offering to download iTunes 10.  This is wrong and I need help getting past this situation. Help!

    Sure, you can get around it if you don't need the newest version of iTunes. I still use version 7.5 because the newer versions didn't strike me as offering anything I needed.
    If you do need a version 10-something then you will have to upgrade your operating system to Leopard (fi your computer will support it) at least.  If you need 10.5 for some reason then there's no getting around it, you will have to buy a new computer.

  • Photoshop Elements 11 will not read the new Nikon Raw/NEF

    Photoshop Elements 11 will not read the new Nikon Raw/NEF (from Nikon D750) files even though codec has been downloaded - what do I do?

    Unfortunately your software pre-dates the camera. Consider buying PSE13. But it is possible to download and install the latest free DNG converter to convert your raw files to the Adobe universal Raw format and the files will open in PSE11 (keep your NEF originals as backups and for use in the camera manufactures software)
    Windows download (.exe file) click here DNG Converter 8.8
    Mac download (.dmg file) click here DNG Converter 8.8
    You can convert a whole folder of raw images in one click. See this quick video tutorial:
    You Tube click here for DNG Converter tutorial

Maybe you are looking for