Will FCP X work Windows XP OS?

Will FCP X operate in a Windows XP environment?

Jeaux wrote:
Sorry RixPix, it will not - though I don't blame you for asking! 
Cheers
I was gonna say... consider yourself lucky!
har!

Similar Messages

  • Will FCP Suite work OK on the dual intel iMac G5 ?

    We are getting ready to open a new digital video classroom for up to 26 students. Each student will have a G5, NTSC monitor, firewire capture device of some sort, and sound I/O to quality sound system. Anyone have any experiences or insight to using the G5 dual core intel iMac's for FCP Suite? Motion, FCP, etc....all work fine? And is there any problem with using the sound jack on the iMac for importing/exporting sound?
    Any input, and links to other research on iMac's and FCP would be very helpful!
    Thanks in advance...

    Welcome to the forum swatkins!
    The current version of FCP 5 will not run on the intel macs but at the end of next month Apple will release a version that does. see here: http://www.apple.com/universal/crossgrade/
    My suggestion would be to wait, and contact your local edu rep from Apple about the LAB pricing... it's wonderful for schools.
    iMac's should work OK with this new version, however it's not out yet of course so no one that knows can say, and those that say don't know...
    That said, there are inherent problems with iMacs using them for FCP, at least from a Pro point of view... They aren't expandable beyond what can be captured thru Firewire, so it's going to leave you editing HDV, DV, or possibly DVCPRO50. That's probably not a problem for a school though. Be careful about specifying scratch disks for your systems. It's best to use another physical disk drive for capturing video to... when it's time to do this, look at Weibetech, Granite Digital, or G-Tech drive setups because they will work fine looping the firewire from a camera or deck thru them (the iMac only has one firewire bus). Other drives just don't support this very well, and dropping frames results. If you need any help whatsoever, don't hesitate to contact me. Also look into sharing DSR-11 machines amongst the computers so you don't use cameras for capturing (because they wear out really fast doing this). You're better off with a few DSR-11's and FireWire switchers to route them to the different stations, than using cameras for the capturing...
    Also, it eases your class procedures to have these computer labs on a LAN so you can share media quickly between the various computers...
    Jerry
    [email protected]
    http://www.coloradofilmschool.net (facility I teach at part time)

  • Thinking of upgrading OS to Mountain Lion will FCP 7 work?

    I am running Snow Leopard and I would like to upgrade to Mountain Lion, my concern is will there be any issues with FCP 7?  Also what are the steps one needs to take to successfully upgrade with out any major issues?

    Final Cut Pro 7 works with OS X Mountain Lion. Just make sure that it's updated to the latest version before upgrading.
    Before upgrading, make a backup of your data with Time Machine or Carbon Copy Cloner. Also, it's important to check that all your apps are supported > http://www.roaringapps.com After that, you can upgrade to Mountain Lion without worrying about issues

  • Will FCP X work on an iMac with an Intel Core Duo processor?

    FCP X requirements are for a 64bit processor.
    The Intel Core Duo is 32bit, so does that mean FCP X will not work at all on it?
    Or will it work but with reduced performance capabilities?

    I checked it on the oldest IMac I have. Seems to work so far .....
    Chipsatz-Modell:          ATI,RadeonHD2600
      Typ:          GPU
      Bus:          PCIe
      PCIe-Lane-Breite:          x16
      VRAM (gesamt):          256 MB
      Hersteller:          ATI (0x1002)
      Geräte-ID:          0x9583
      Versions-ID:          0x0000
      ROM-Version:          113-B2250F-219
      EFI-Treiberversion:          01.00.219

  • Will FCP 7 work in Mavericks?

    I use FCP 7 for my work, for many years and dont want to upgrade to FCP X (yet). However i do like the memory compression idea so would like to upgrade to Maverick OS.

    Apple does not support or recommend FCS 2009 (aka fcp7 et.al. ) for installation on mountain lion.
    Some get it to work, some don't. ymmv.
    x

  • Will FCP 7 Work with New Mac Pros?

    Any indication of I will still be able to work in FCP7 on the new Mac Pro 2013? I'm not too keen on FCPX at the moment. Thanks for any info.

    All true, however, FCS 2009 (aka FCS 3) does run with the current OSX (10.8.4) which is two full versions beyond the last supported one (10.6.8).
    So, the real answer is, we'll have to wait and see how things play out.
    x

  • Will FCP-X work on Intel i7 (2.8 GHz; 2 cores)?

    Have MacBook Pro that seems to meet requirements for FCP-X except I'm not sure about the processor.

    You need to check your MBP against the system requirements here:
    http://www.apple.com/finalcutpro/specs/
    The only comment I would add is that Apple recommend 2 GB RAM as minimum - this is way too little fore FCP X.
    Andy

  • Will FCP X work with the Canon Vixia HF S10 ?

    The HF S10 doesn't appear on the compatibility list.  If it currently doesn't, is there a work around to import files?  Thanks.

    Hi pleibowitz. If what you are saying is true, and FCPX can only read from a camera and can't read and edit an MTS file that has been, say, archived on a hard drive, then I can't use FCPX. That's really disappointing. I don't want to pay a bunch of money for some software that can't read my video files except from the camera. How do I archive my original footage, then import and use it later?
    This is really sad. All I want to do is be able to drag an MTS file from my HD into FCPX and have it let me start editing with out a bunch of conversion, or transcoding, or converting into ProRes. It just eats up too much HD space. I love how FCPX uses the Metadata and imports it all, but come on, can't I use it without?
    I can only assume the metadata that FCPX uses in somewhere else on the CF card or Flash HD of the camera.
    I guess I'll be sticking with Premiere. It reads AVCHD .mts files beautifully, from anywhere. Very nice. I may not have all the metadata stuff, but at least I can archive and move .mts files around where ever I want with the confidence that I can use them later.

  • If I upgrade to Mavericks will FCP 6 still work?

    I have no intention of switching to FCP X but Snow Leopard is getting outdated for some applications.  Will FCP 6 work if I upgrade to Mavericks?

    Michael Grenadier wrote:
    ...I suppose that hardware drivers would be problematic in emulation also. 
    I got an email today from a client who's buying a new macbook and wants to run fcp7 on it.  Told him he might be better off buying an older machine. 
    Buying an older machine is an option, but quite honestly, if your client is doing his work for professional purposes (whether for himself or 3rd parties) I would suggest that he purchase TWO older Macs (preferably the same model).
    Then he can set them both up and have a backup situation when the first one fails.  In the case of using a new Mac, this is not as important, as one can always run out to the Mac store, come home with a new replacement and restore their backup/clone and be up and running with little loss of time.  That scenario is not possible with a used Mac.
    Hardware drivers can function in Parallels, through USB, but not firewire.  What kind of hardware drivers are you talking about?
    Lastly, I have finally found a local source who will "loan" me his copy of FCP 6 for educational/research purposes!

  • Will itunes 11 work with windows xp, I have ended up with this neqw version and it doesn't work , I can look at my library ,but not play and since synching my ipod it is now empty. Apple support is useless, they treat me like I'm on a Mac not a PC .

    will itunes 11 work with windows xp , I have ended up with this new version after accepting an update and now although I can view my library I can't play anything and since synching my ipod it is empty. Apple support can't seem to get it's head around the fact I'm on a PC keeps asking for an apple serial number, Help!!!

    Morning gedeye,
    Thanks for using Apple Support Communities.
    System Requirements
    Windows XP Service Pack 2 or later
    32-bit editions of Windows Vista or
    32-bit editions of Windows 7, and Windows 8
    For more information on this, take a look at this article:
    http://support.apple.com/kb/DL1614
    Best of luck,
    Mario

  • Itunes 10 will not load on windows 7 64 bit. Error code 2324. Old Itunes is gone or not working. Cannot play anything although files are still there. What the ??? is error 2324. Seems like alot of people ar ehaving the same problem

    Itunes 10 will not load on windows 7 64 bit. Error code 2324. Old Itunes is gone or not working. Cannot play anything although files are still there. What the ??? is error 2324. Seems like alot of people ar ehaving the same problem

    I have had this problem with Windows 7 and iTunes updates for some time. Each time it takes hours to solve but with the over the air upgrade to IOS6 on my iPhone and iPad, I was determined to solve and remember what I did, So here it is:
    http://www.care4pcs.co.uk/2012/09/pear-shaped-apple-ios-6-for-iphone-ipad.html
    I hope this helps you and any other users.

  • Itunes will no longer work on my Windows 8 PC. When I attempt to start the program a message says: A problem caused the program to stop working correctly.  Windows will close the program and notify you if a solution is available.

    Itunes will no longer work on my Windows 8 PC. When I attempt to start the program a message says: A problem caused the program to stop working correctly.  Windows will close the program and notify you if a solution is available.  I have tried to uninstall iTunes but the Windows uninstaller will not delete the program I get a message that says: A network error occurred while attempting to read file: C:\Windows|Installer|iTunes.msi.  How do I get iTunes to work again?

    Whentrying to uninstall iTunes (the first program that must be uninstalled per the instructions) I get a message:  A network error occurred while attempting to read file: C:\Windows|Installer|iTunes.msi. I can't even uninstall iTunes?
    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page).
    http://majorgeeks.com/download.php?det=4459
    Here's a screenshot showing the particular links on the page that you should be clicking:
    After clicking one of the circled links, you should be taken to another page, and after a few seconds you should see a download dialog appear for the msicuu2.exe file. Here's a screenshot of what it looks like for me in Firefox:
    Choose to Save the file. If the dialog box does not appear for you, click the link on the page that says "CLICK HERE IF IT DOES NOT". Here's a screenshot of the page with the relevant link circled:
    When the dialog appears, choose to save the file.
    (2) Go to the Downloads area for your Web browser. Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install. Does it go through properly this time?

  • Will Ipod Touch work with Windows 8

    Will IPod Touch work with Windows 8?  Why is that not even a listed option in the help feature?

    Apple has just not got around to revising the documentation to reflect Win 8. Just use instructions for Win 7

  • Will  FCP 6.0.4, Quicktime 7.5.5 and Mac OS 10.4.11 work together properly

    I have not updated Quicktime on my system for some time now, because I know that FCP & Quicktime work hand in hand. I don't want to cause a problem with any of my FCP editing, by having non-compatible updates trying to work together.
    I bought an I-pod touch and when I connected it to I-tunes,
    I was told that I had to upgrade I-tune to allow it to work properly.
    So I updated my I-tunes Application to ver 9.0.2 on my power PC G5 Mac tower, and now I'm told that in order for the newest version of I-tunes to work that I must update my Quicktime player application to ver 7.5.5.
    Could someone please tell me if updating my Quicktime player may cause a problem with my FCP Application?
    Also... what is the best way to handle updates when they arise?
    I presently have Quicktime Pro ver 7.5 and Final Cut Pro 6.04 on a Power PC G5 Mac tower running Mac OS 10.4.11
    Thanks for the advise,
    Todd

    The current version of Quicktime is 7.6.4, which will be the only one available from Apple Software Update.
    FCP 6.0.6 will work with it and the spec on the QuickTime page says you need at least Mac OS X 10.4.11 to run it. The last few QT updates have all been stable for me.
    So at least in theory, you should be good.
    If you are in the middle of a project, don't upgrade until you finish it. Otherwise, make sure that you have a current backup before you do.

  • When I click onto the firefox webbrowser, I get the message "firefox has stopped working, windows will close the application to find a solution to the problem " This has been going on for several days, I've had to go back IE to access web pages

    When I click onto the firefox webbrowser, I get the message "firefox has stopped working, windows will close the application to find a solution to the problem."

    I had this exact same problem.  I found this fix and it worked for me. 
    Step 1:
    Browse to C:\Program Files (x86)\Common Files\Apple\Apple Application Support and copy the filen named QTMovieWin.dll. 
    Step 2:
    Browse and past that file into C:\Program Files (x86)\iTunes.
    Hope this helps you.  I wish I could remember where I saw this originally so I could thank them.
    Good Luck.
    Anthony

Maybe you are looking for