Will FCPX work on my macbook pro?

Will FCPX work on my macbook pro? Will it be really slow?

Welcome to Apple Support Communities
It depends on your card. See > http://www.apple.com/finalcutpro/specs/ You need a Intel HD Graphics 3000 or better. If you haven't got this graphic card, you can't use Final Cut Pro.
Also, note that it will work properly if you have a dedicated card, like the one that has got a 15-inch MacBook Pro

Similar Messages

  • Facebook and Hotmail will not work on my Macbook pro

    Facebook and Hotmail will not work on my Macbook pro. I have tried safari and firefox. I have unloaded and reloaded an old version of firefox and still no luck. When go to ebay it opens but looks very weird. I am using Mac OS X Version 10.6.6 with a 2.4 GHz Intel Core 2 Duo. I am so frustrated, I have tried everything I can think of and still no luck.

    Good of you to offer the detail you did (a lot of people don't bother) but it still is not quite enough. Texting that it "looks very weird" just leaves me blank. Most basic remedy for browser issues is to use Safari to google "adobe flash" and download a fresh file & install. Can't think of anything else given what you've posted....

  • I have 23 inch Apple HD Display. Will this work with my MacBook Pro? How shall I connect it?

    I have 23 inch Apple HD Display. Will this work with my MacBook Pro? How shall I connect it?

    yarova818,
    there were two different 23-inch Apple Cinema HD displays made. The first one was made between 2002 and 2004, and has an ADC connector. The second one was made between 2004 and 2008, and has a DVI-D connector.
    If you have the display with an ADC connector, then according to this Apple page, your display will work with your MacBook Pro if it’s a 13-inch or 15-inch model. If you have a first-generation MacBook Pro, you’d need an Apple DVI to ADC Adapter (or equivalent) to connect them. If you have a Unibody or Retina MacBook Pro, then you’d also need a Mini DisplayPort to DVI adapter (or equivalent) to complete the connection. A Retina model would also have the option of using a third-party HDMI to DVI-D adapter to complete the connection with the DVI to ADC adapter.
    If you have the display with a DVI-D connector, then if you have a first-generation MacBook Pro, you should be able to plug it in directly. If you have a Unibody or Retina MacBook Pro, then the Mini DisplayPort to DVI adapter would let you make the connection. Again, Retina models also would have the option of using a third-party HDMI to DVI-D adapter.

  • Will flash work on a macbook pro?

    Does flash work on a macbook pro? If not, how do you view various videos on line that require flash?

    Flash works fine. If you use Chrome, it's built in. Otherwise, you install from here, no where else:
    http://www.adobe.com/support/flashplayer/downloads.html

  • Will this work on my Macbook Pro 13" (Early 2011)

    I was looking for a game to play on my Macbook Pro and I was wondering if Call of Duty 2 would work on it. http://www.amazon.com/gp/product/B000ETJJAE/ref=oh_details_o00_s00_i02 I I am running Lion 10.7.4. I actually already bought this product but hesitant on opening it because I have read a few reviews of people having problem with it. I also went to the Aspyr website. http://www.aspyr.com/games/call-of-duty-2 I'll return it to Amazon if it doesn't work. Please help!

    Try different USB cables.
    Try a different enclosure.
    Try all USB ports.
    Try it on another Mac.
    Is no success, the SSD may be DOA.
    Ciao.

  • Samsung Serie 850 EVO, will it work on my macbook pro late 2011?

    Hi all,
    I have a MBP late 2011 13", and I have found a nice offer for a samsung serie 850 evo, so I would like to upgrade my MBP with this SSD. But I can not find an specific answer for this Samsung SSD model, everyone seems to have upgrade it to the 840 or 850 pro :S
    Does anyone know if it will work fine with my Mac?
    Thaks!
    Pedro.

    This seems to be a popular choice, however:
    http://www.cnet.com/products/samsung-ssd-850-evo/
    "  There's not much to complain about the drive except its Samsung Magician software, which is required for RAPID mode and other features and is available only for Windows. That means other platforms, such as Mac, Linux or game consoles, won't be able to take advantage of most of the drive's features."

  • HT4437 Airplay on apple tv works from my ipod touch but will not work from my macbook pro.  Any thoughts on wht the problem may be?

    any idea on what the problem is?

    Welcome to the Apple Community.
    Does your MacBook meet the specifications for AirPlay
    Try the following steps, check whether things are working after each step where appropriate, before trying the next.
    Check AirPlay is turned on on the Apple TV (turn it off and on if it already is)
    Check that both devices are on the same network (Settings > Wifi, on the mobile device and Settings > General > Network, on the Apple TV).
    Restart the Apple TV (Settings > General > Restart).
    Restart the Apple TV by removing ALL the cables for 30 seconds.
    Restart your router.
    Restart your mobile device.
    The following article(s) may help you.
    Troubleshooting AirPlay

  • Getting comcast cable/internet...Will it work with my Macbook Pro?

    We are getting Comcast tomorrow...we currently have AT&T internet and my Mac is always getting kicked off my internet, onto a "belkin54g" that barely works. This is getting really annoying, but tomorrow we are getting the comcast internet/cable thingy.  So is comcast going to work with my laptop O.K.? or will we have trouble with that too? because I am really tired of being kicked offline all the time.     Thanks!

    It sounds like you're having problems with your router, not with your ISP. If that's the case, and you don't replace the router, you'll probably continue to have the same problems.

  • Will this work with my MacBook Pro?

    http://us.kensington.com/html/1284.html
    Thanks!

    No, the MBP's security slot is reinforced for just that purpose. If it gets yanked on, damage from the MBP being pulled off the table/desk much more likely than any damage to the slot itself...
    Hope this helps...

  • HT3964 my built-in isight camera will still not work on my macbook pro after completing smc reset.  The green light comes on but no video.

    my built-in isight camera will still not work on my macbook pro after completing smc reset.  The green light comes on but no video. 
    Any Suggestions?

    Restart the computer.

  • Will a Mini-Displayport to VGA adapter work with new macbook pro 2011

    I was thinking of getting a mini-displayport to vga adapter for my external monitor I wanted to hook up but I wasnt quite sure whether it would work as my macbook pro has the new thunderbolt port, I was confused if the new port would only work with the thunderbolt displays. Could anyone help me as I'm not too sure what will work.

    I tried the Apple miniDisplayport to VGA in a Thunderbolt MBP and iMac and they both worked. Same for the Apple miniDIsplayport to DVI.

  • Will MS Office Standard 2011 for MAC 32-bit work on my MacBook Pro which is 64-bit?

    Will MS Office Standard 2011 for MAC 32-bit work on my MacBook Pro which is 64-bit?

    MacOffice 2011 will run on your computer. 32 bit software runs on a 64 bit computer.

  • Need a printer driver for a PIXMA MG2900 that will work on my MacBook Pro Operating System OSX 10.4.11

    I have just purchased a Canon Pixma MG2900 printer and need to find a driver for this printer that will work with my MacBook Pro Operating System OSX Version 10.4.11.
    I was directed to iTunes PIXMA/MAXI, but it didn't seem to download for me.  It did say that it was for IPads or IPhones, not sure that it's intended for use on a computer.

    Probably best to go to a library and submit your resume there.
    You can make many web browsers claim to be ie.  Here is how.
    TenFourFox -- It's a port of the latest FireFox to run on older hardware and software.
    "World's most advanced web browser. Finely tuned for the Power PC."
        --  works for me on 10.4.  Supports 10.5
    http://www.floodgap.com/software/tenfourfox/
    alternative download site:
    http://www.macupdate.com/app/mac/37761/tenfourfox
    OmniWeb uses the lastest Safari framework.  The open source WebKit. Other browsers like Safari and iCab use the OS version of WebKit.  The OmniWeb downloaded dmg includes it's own copy of the latest WebKit.
    http://www.omnigroup.com/products/omniweb/
    Safari 4.1.3 for Tiger
    http://support.apple.com/kb/DL1069
    iCab - The Taxi for the Internet
    http://www.icab.de/
    What is my user agent?
    http://whatsmyuseragent.com/
    You want to change your user agent to be ie.
    in tenfourfox
    tools > add-ons
    seearch for change user agent
    install
    user agent switcher
    tools > User agent switcher
    change to ie.

  • Will idvd with a new MacBook Pro work with a DVCAM deck? I'm using firewire to burn a DVD from a DVCAM tape in a Sony DSR-30 deck but it isn't working.

    Will iDVD with a new MacBook Pro work with a DVCAM deck? I'm using firewire to burn a DVD from a DVCAM tape in a Sony DSR-30 deck but it isn't working.

    http://www.lafcpug.org/phorum/read.php?1,268296,268300
    Bit of googling wouldn't go astray.

  • Will aperture 4 work in my macbook pro running 10.6.8?

    Will Aperture 4 work in my Macbook Pro? I've got 10.6.8? thanks

    There is no Aperture 4 at this time.
    Aperture 3.5.1 requires OS X 10.9 or higher, so one would figure that any future versions of Aperture (3.5.2 or higher) would require 10.9.x at minimum, as well.

Maybe you are looking for

  • Etrecheck report - please advise

    Can you please let me know how to fix the items in red? thanks! EtreCheck version: 2.1.8 (121) Report generated 9 April 2015 9:45:34 pm GMT+2 Download EtreCheck from http://etresoft.com/etrecheck Click the [Click for support] links for help with non-

  • How stop the process of a job program and no sent data to XI?

    People, I have a program that stop by a error message that I put after a select like this:   IF sy-subrc <> 0.     v_error2 = 'E'.     MOVE 'No data found. REGUH'(e01) TO emsg.     PERFORM call_error_function USING emsg.     PERFORM call_log_function

  • Content server and Images

    Hi... we've found some odd behaviour with content server and I'm wondering if anyone else has had similar experience. Our installation is spread accross a number of servers, we have a front end portal/image server with Content Server installed on one

  • Sorting the Characters

    Hello friends, I have got an issue while sorting the Character values. Not sure why the same sort statement working differently with the same code in different systems (Dev and quality servers).Example of the issue is described below: In quality: We

  • Change Illustrator version with scripting?

    Hello! I go through several dozen files a day at work and we have to save down everything to 9 as we go. Actions don't seem to delve that deep into the save as promt, so how can I script this so that the default goes to Version Illustrator 9 everytim