Will Final Cut Express 2.0.3 work with Tiger 10.4.4

Will Final Cut Express 2.0.3 work with Tiger 10.4.4

We have it running on our iMac G5s. Although it runs reasonably well, there are some teething problems with it. One of them is we cannot capture from a camcorder using timecodes because it just crashes when we try and do that, so we can only capture using the "DV Convertor" mode. Not unreasonable, but slightly annoying.
We also have the problem that, when we brought some new iMac G5s recently with the iSight built in, it wouldn't work at all because it didn't seem to realise that a PCI-Express graphics card was actually a graphics card at all, and it kept demanding we install an AGP one, which was a bit stupid.
Apart from that, it's definitely useable. No crashes or anything like that. And we use it daily.

Similar Messages

  • Will final cut express work with a sony DCR-SR40

    I got a sony DCR-SR40 camcorder for christmas an imovie won't work with it - will final cut express do the job?

    First of all, welcome to the forum.
    That camcorder uses a USB interface, correct? FCP and
    iMovie can only import via FW. For hard drive
    camcorders, you must import the footage like you
    would files from an external HD. Then you can work
    with the files in FCP or iMovie.
    Good luck and happy New Year.
    This Camera supports Mpeg -2 files I have had no end of problems importing this into I movie. Bought the software recomended by Sony (Capty MPEG ..whatever) cost £65 and is rubbish, so bought the Quicktime MPEG 2 codec plugin for £15, got the picture not the sound. What plug in do I need for the Audio, or should I ditch the camera and go for a Firewire version.

  • Will final cut express work with os maverick

    I am running mountain lion and FCE. will final cut express work with mavericks.?

    A follow-up to my previous post.  FCE 4.0.1 is working fine with Mavericks on the computer at my church (we use it to video-tape sermons and masses for YouTube). 
    A few weeks ago, I purchased a copy of FCE 4.0 from Amazon (one of only two left).  It would NOT work with Mavericks, and there was no upgrade available on the App Store (the only source of software upgrades with Mavericks).  So, I installed FCE on another iMac running Lion.  It installed just fine, and when I went to "Check for New Software" in "the apple", it found the upgrade to 4.0.1, installed it, I copied it to a blank DVD, and installed that on my iMac running Mavericks.  It is working fine.  (HINT TO APPLE: Can we please go back to the simple "Check for Software Updates" instead of the App Store?  Ever since Steve Jobs died everything Apple has become more complicated, not intuitively simple as he made it.)

  • Will Final Cut Express work on a Macbook Core Duo

    I have a 2006 Macbook 2ghz Core Duo with 2gig of Ram. Will Final Cut Express work on this? Will the integrated graphics card affect performance?

    hey there 12frets,
    FCE should run w/out major probs. you should even be able to run a 2nd display up to 23", which would be very handy as the Canvass(playback) window will be rather small on a 13" display.
    FCE System Requirements
    A Mac computer with a 1.25GHz or faster PowerPC G4, PowerPC G5, Intel Core Duo, Intel Core 2 Duo, or Intel Xeon processor
    For AVCHD: A Mac computer with an Intel processor
    1GB of RAM or more
    An AGP or PCI Express graphics card compatible with Quartz Extreme; or an Intel GMA integrated graphics processor in a MacBook or Mac mini computer
    Some FxPlug filters are not compatible with integrated Intel graphics processors.
    A display with 1024-by-768 resolution or higher
    A DVD drive for installation
    Mac OS X v10.4.10 or later
    QuickTime 7.2 or later
    500MB of disk space to install Final Cut Express and LiveType
    Additional 500MB to install LiveType content
    good luck.

  • Will Final Cut Express help with...

    I am considering purchasing Final Cut Express for a video project I am working on for my company. I have been using iMovie for a while and have not found a way to overlay a graphic (in this case, our company logo) on top of video. Will Final Cut Express allow me to do this?
    Also, I just shot some video of clients giving testimonials that I would like to turn into marketing pieces. Unfortunately there is a lot of background noise in several of the clips. Does Final Cut Express have any audio tuning features that will help me reduce or remove the background noise?
    Any guidance would be greatly appreciated!

    Will Final Cut Express allow me to do this?
    Yes, easily.
    Does Final Cut Express have any audio tuning features that will help me reduce or remove the background noise?
    Not really. You could try using a noise reduction tool like SoundSaop, but you're best bet is to re-shoot using proper mics and placement.
    -DH

  • Will Final Cut Pro 4.5 still work if I upgrade to Mac OS X v10.5.4?

    Will Final Cut Pro 4.5 still work if I upgrade to Mac OS X v10.5.4?

    I'm with Jon on this one. I know someone who uses FCP 5.0 on a MacBook Pro, he has all sorts of wierd issues including:
    Projects he has created throwing up an error message "Unreadable on this machine" when re-opened.
    Projects losing and refusing to connect to render files.
    Dissolves simply not working -this is not to do with lack of handles, it just happens.
    LiveType and FCP's own title generator files not automatically compositing.
    Lots of kernel panics and unexpected quits.
    These might not happen all the time, but always crop up at the worst possible moment.
    I can move his project files and media to my setup and everything works.

  • Will Final Cut Express be any better than iMovie for colour resolution

    Hi
    I have just made the move from a Laptop/Windows to a Macbook Pro, whilst running on the Laptop i used Ulead Video Studio V10.5 to capture and edit DV movies from my Panasonic NV-GS180. Once I learnt the basic the output results were very good, eg. an mpeg movie file of around 2.5GB for an hour of video.
    Since moving to the Mac I have uploaded 2 recent DV tapes into the standard iMovie application. I have done a simple upload with minimal editing just to prove the quality of the output. I have output into H.264 format and the resultant file is around 2.5GB for an hour. The quality of the video is very poor compared to the equivalent on the VS10.5. Now, so by "poor quality" i mean the colour resolution is literally rubbish, on VS10.5 there are many different shades of the same colour, whereas in iMovie there is literally two. The resolution also looks worse, but I have read that iMovie doesn't handle the original interlaced video from my camcorder. So, I am more than willing to but Final Cut Express if my two problems with iMovie are addressed to achieve the same quality as VS10.5 on my old windows XP Laptop. There's no Trial like there is with Aperture, which I have recently bought to improve on the original installed iPhoto.
    Any help, advice or comments gratefully received.

    hi Ian
    In store, we were using an huge Mac, whereas I am using a Macbook Pro. I must admit I did not try iMovie in the store to check the quality was equally as bad. But I can confirm that since installing FCE4 on my Macbook Pro at home and capturing the same piece of video that the colour resolution is the same as in store, so all is good.
    Cheers
    Gary

  • HT2948 Will Final Cut Express 4 work with the new Canon XA10 AVCHD ??

    I'm in the process of shopping for new cameras for my students. We edit on Final Cut Express 4 HD. I want to buy the Canon XA10camwras which record to SD cards.  I keep reading AVCHD video and am new to the technology. The B&H website says this camera :
    Product Highlights
    1/3" CMOS Sensor
    Native 1920 x 1080
    24Mbps AVCHD Recording
    60i, PF30, PF24, Native 24p
    64GB Internal Flash Drive
    Flash Memory
    The XA10 Professional Camcorder allows users to record up to 24 hours of clear high definition video to a 64GB internal flash drive or to two SDXC-compatible memory cards. With Relay Recording, the camcorder automatically switches video recording from the internal drive to the SD memory cards when the memory becomes full.
    Video can be copied from the XA10's internal drive to removable SD memory cards. That makes it easy to insert the card into your computer or HDTV's card reader and view your recorded footage immediately. Double Slot Recording allows recording to two SD cards simultaneously, providing an automatic backup while shooting.
    AVCHD Codec
    The XA10 features the AVCHD codec. AVCHD (Advanced Video Coding High Definition) was announced in 2006 and is quickly becoming the standard for professional camcorders. AVCHD utilizes MPEG-4 AVC/H.264 compression technology similar to the technology used in Canon's HD DSLRs. In addition to professional grade camcorders, AVCHD is very popular in the consumer market and as a result most nonlinear editing software, both professional and consumer, have full support for the codec; this makes for easy compatibility with the XA10 no matter what system you choose.
    Will I be able to take out the SD cards, put them in a card reader, and simply log and transfer into Final Cut Express? Again, I'm a novice and don't know what a lot of this means.
    Thanks!!!!

    FCE should work with the 60i (interlaced) footage this camera produces.
    Also you should be able to load the SD and capture.
    I do not have one or used one with FCE, the specs indicate it should.
    Maybe a current owner can chip in their experiences.
    Al

  • Will Final Cut express work with MacBook Pro??

    I am new to Mac and got my first Mac, MacBook pro. 2.4GHZ - 2.o Gig Memory.
    Will this be enough or is there an hardware requirement that macbook pro does not come with?
    iMovie 08 does not have the effects I was using in the old PC. Slow motion, combining many audio tracks, cross fade etc.
    Thanks

    Final Cut Pro is the same program (to all intents and purposes) as Final Cut Express and requires the same power of computer - no more, no less.
    For most people, FCP will not do anything that FCE can't - apart from allowing you to use formats such as DVCPRO etc. that amateurs are unlikely to use. All the filters and transitions are exactly the same except for a couple of insignificant ones.
    The only reason for buying FCP is in order to get all the other programs that are bundled with it.
    Ian.

  • Will Final Cut Express Work with Internal iMAC speakers?

    Am new to Final Cut Express, having worked in iMovie for years
    I am trying to import iMovie8 content into FCX. Import went fine, however when playing back clips in view or canvas I hear no audio. Audio tracks show waveforms. When I scrub play line over tracks, I see reaction in audio meters, however when just simple play-no action. Have seen notes to set View/Video Out/Canvas Playback-have done so but no change in audio status.
    Does FCX require external speakers (which I don't have now), or is there a way to get it to play through internal speakers.
    Thanks for any help

    Peter-thanks for the reply
    I did validate that FCE uses the internal speakers when I directly imported some video clips from my camera-so I seem to be past that problem.
    I also found the iMovie import reference "does not import sound effects, audio levels or transitions". Since I didn't have any of these, I'm not sure this applied. However, since my base question (use of internal speakers) was definitely answered, I'll mark this answered and start another stream.
    Again-Thanks

  • HT3835 Will final cut express 3.5 run on the newer mac os 10.8 or 10.9?

    I am going to be purchasing a MacBook Pro when the newest model is released. I am wondering if I can run my Final Cut Express 3.5 with the latest operating system.

    I've been using it with Lion and Mountain Lion and it is working well. It was updated to 3.5.1 via Software Update.
    However, you will have a problem with the installer as I got the "PPC applications are not supported" when I tried to install it in Lion after doing a fresh install (although FCE is a Universal application, the installer appears to be PPC). So, I followed the file locations in this article and moved every file from my Snow Leopard partition to the Lion partition into the same folder/location. Restarted and it has been working since.
    http://support.apple.com/kb/TA38198?viewlocale=en_US

  • Will final cut express support my camcorder eventually

    I purchased a canon hv20 and it is not a supported device with final cut express yet and I was wondering that since the hv 10 is if the hv20 will supported soon also?

    There are thousands of cameras out there but only a handful on the supported lists.
    This is because it would use up all Apple's profits and time to test every one of them - an impossible task. New cameras are being introduced all the time.
    Pretty well all DV cameras with FireWire outputs will work with FCE.
    The best thing people can do is ignore those lists as they cause more trouble and confusion than they are worth.
    Ian.

  • Xacti HD and Final Cut Express -- It used to work great! How do I go back?

    I have a Sanyo Xacti HD700. It gives me 1280x720 MPEG-4 AVC/H.264 files, which my Mac just loves. I used to be able to quickly edit the clips together in Final Cut Express, export using complementary QuickTime settings (specifically, those recommended by Vimeo for HD playback), and get beautiful MP4 files, relatively quickly.
    Then, one day, a friend needed me to edit a quick video using a DV camcorder. It was confusing as heck getting the footage into FCE, and not particularly elegant getting it out. But, the project was done overnight, I washed my hands of it, and wanted to get back to making beautiful MP4 files again, relatively quickly.
    Except I can't! Now, for one, encoding takes hours. Hours! My source videos and export videos are very similar, yet I sit and watch as the estimate for completion actually goes up for an hour before slowly coming back down.
    And frankly, that would be fine, except now my exported videos are the wrong size. They include letterboxes, and the video itself is squished, stretched. So I wait four times as long for a ghastly video. The best I could do is use the Quicktime export settings to "crop off" the letterboxing, but there's still some black bars and it's just not the same.
    Here's how my videos used to look:
    http://vimeo.com/1067235
    Here's how an exported video looks now:
    http://vimeo.com/1655414?pg=embed&sec=1655414
    What happened? Out of the box, everything worked perfectly. Now, tainted with actual tape, Final Cut Express seems like it's running my videos through six extra wringers and giving me clips worse than I'd get just cut-and-paste editing the Xacti files in QuickTime Pro!
    I Googled my brains out, and all I've learned is, if I had Final Cut Pro, "Project Settings" would have all the switches I need. Well, I don't have FCP, just FCE.
    Somewhere, something was set that I want to unset. Can anyone help? Do I have to delete every trace of FCE and just reinstall?
    Mahalo for any advice!

    It sounds like you didn't change the settings after you made the DV video. Did you switch it back to 1280x720 and make a new sequence in that format? Check item properties for the sequence you edited. What does it say? Also check item properties for any media you captured since working in DV.

  • Does Final Cut Express 4.0.1 work on OS 10.7.5?

    Deos Final Cut Express work on OS 10.7.5?  Upgrading to a new MacPro and Final Cut Pro X, but have unfinished project on FCE that is not opeing properly. 

    Last officailly supported OS was 10.6.8.
    There have beed mixed results with 7 but Apple does not support the marriage.
    This forum has plenty of info if you wish to search.
    My thoughts/advice are:  fix your issue and finish your Project with existing gear.
    FYI: Mavericks and FCP X 10.1 seem fine.
    Al

  • Will Final Cut Express be improved by upgrading from Mountain Lion to Mavericks?

    Will the performance of Final Cut Express, currently running under Mountain Lion OS X 10.8.5 (12F45), be improved by upgrading to Mavericks?

    Ian R. Brown wrote:
    .  .  .  .  but you will need to have Mavericks installed to use FCP X.
    Should you feel the urge to give it a try, this website has a free 2 hour course of video  tutorials that will get you off to a flying start.
    http://www.izzyvideo.com/final-cut-pro-x-tutorial/
    There are some 26 "bite-size" lessons so it's not too daunting.
    Quite right Ian.
    Probably should have mentioned it. 
    Al

Maybe you are looking for