Will Final Cut Pro X transfer to a new Mac?

I'm thinking about purchasing Final Cut Pro X in the next few weeks, but I also plan to replace my computer by the end of the year. If I download the app onto my current mac, will I also be able to install it on my new Mac when I get it?

Yes...
The Final Cut Pro X license agreement states that you are granted a limited non-exclusive license to install and use the Apple Software only on Apple-branded computers that you own or control in accordance with the Mac App Store Product Usage Rules located at http://www.apple.com/legal/itunes/ww/ ("Mac Usage Rules"). Except as permitted under the Mac Usage Rules, you may not distribute or make the Apple Software available over a network where it could be used by multiple devices at the same time.

Similar Messages

  • Will Final Cut Pro X work on this old Mac Pro?

    Hello,
    I'm running OS 10.6.8 on this computer:
    Model Name: Mac Pro
      Model Identifier: MacPro4,1
      Processor Name: Quad-Core Intel Xeon
      Processor Speed: 2.66 GHz
      Number Of Processors: 1
      Total Number Of Cores: 4
      L2 Cache (per core): 256 KB
      L3 Cache: 8 MB
      Memory: 16 GB
    I want to upgrade my OS. So I know I'll have to upgrade FCP from 6 to X. Will it work okay on my old Mac Pro?
    Thanks.

    Neal Fox wrote:
    It's a little more complicated than that.
    I've got to update my OS from 10.6.8 because I need to update some other programs. Once I do that, I can't use my FCP 6 anymore.
    So the only way to try it out is to update the OS.
    I think I'll look into upgrading the VRAM if that's possible.
    Thanks.
    Have you thought about a dual boot system?
    This way you do not have to change any existing stuff.
    BTW: I had exactly the same tower as yours and it was the graphics card that was the weak link.
    In my case I upgraded to a newer Mac.
    Al

  • If I update to Snow Leopard, will final cut pro still work?

    If I update to Snow Leopard, will final cut pro still work? My current version of Final Cut Pro is 6.0.6. Thanks.

    Apple is not telling you the Complete story about Lion.
    The installer for FCP 6 is Power PC code/ IBM CPU code, which Lion does not support.
    FCP 6 is NOT Power PC code, it will run on Lion and Mountain Lion, as I have read on many posts.
    The solution??
    Solution condition where FCP 6 installed and upgrading OS to Lion
    Do nothing, its already running OK
    Solution condition where FCP 6 not installed and OS Lion installed.
    Connect a firewire drive to your MAC and install the old OS on it (eg snow leopard) ,
    Reboot to that OS
    Install FCP 6
    Reboot to your new OS   (EG Lion)
    Run FCP 6

  • Will final cut Pro 7.0 work with ATI Raedon X1600

    Will Final Cut Pro 7.0 work with a ATI Raedon X1600 Graphics Card

    If you want to check other applications for compatability:
    http://roaringapps.com/apps:table

  • Ok. can any one tell me: will Final Cut Pro 6 fcs2 bundle) install on my GeForce 6600 LE Video Card on my G5 powerpc dual core 2.0? Thanks Much to anyone who can give me a definitive answer. also if not any fix aka .plist?

    ok. can any one tell me: will Final Cut Pro 6 (fcs2 bundle) install on my GeForce 6600 LE Video Card on my G5 powerpc dual core 2.0? Thanks Much to anyone who can give me a definitive answer. also if not any fix aka .plist?

    Look at this technical specs document, your system should be fine with the possible exception of Color.
    As for managing your preference files, use Digital Rebellion's tool.
    Good luck.
    Russ

  • Will Final Cut Pro 4.5 still work if I upgrade to Mac OS X v10.5.4?

    Will Final Cut Pro 4.5 still work if I upgrade to Mac OS X v10.5.4?

    I'm with Jon on this one. I know someone who uses FCP 5.0 on a MacBook Pro, he has all sorts of wierd issues including:
    Projects he has created throwing up an error message "Unreadable on this machine" when re-opened.
    Projects losing and refusing to connect to render files.
    Dissolves simply not working -this is not to do with lack of handles, it just happens.
    LiveType and FCP's own title generator files not automatically compositing.
    Lots of kernel panics and unexpected quits.
    These might not happen all the time, but always crop up at the worst possible moment.
    I can move his project files and media to my setup and everything works.

  • Will final cut pro X 10.0.8  still be available for purchase after the new final cut pro release for mavericks/new macpro in december?

    will final cut pro X 10.0.8  still be available for purchase after the new final cut pro release for mavericks/new macpro in december?

    10.0.8 is no longer available, except in the trial version. The current sale version is 10.0.9. Apple has never sold older versions of their software, only the current version. That's not going to change in the near future.

  • Will Final Cut Pro X recognize Avid Mojo interfacing with Broadcast Pix?  If so, how do I accomplish this?

    Our church used an HP for 12 years that was refurbished and finally died.  We captured Sunday services for broadcast using Avid Express connected to a Broadcast Pix Switcher via an Avid Mojo with a firewire cable.  This week, I replaced it the HP with a Mac in hopes of using Final Cut Pro to capture and edit video for broadcast.  Will Final Cut Pro X recognize Avid Mojo interfacing with Broadcast Pix?  If so, how do I accomplish this?  Currently I have the mojo connected to the Mac via a firewire adapter through the thunderbolt port.  However, the Mac isn't seeing the mojo or the cameras connected to the switcher.

    Just turned off background rendering.
    I'm not certain what you mean for specs in a specific point in the video, but here are the specs for the entire edit I initially received:
    Dimensions: 1920 X 1080
    Codecs: H.264, AAC, Timecode
    2 Audio Channels
    Total bit rate: 12,083
    Size: 951,735,770 bytes (951.7 MB on disk)
    Here are the specs for the exported video that has the audio issue:
    Dimensions: 1920 X 1080
    Codecs: H.264, AAC, Timecode
    2 Audio Channels
    Total bit rate: 12,274
    Size: 966,817,082 bytes (966.8 MB on disk)
    The video is 10:28 minutes long and the audio leaves at 5:57.
    If that wasn't what you were looking for, just let me know. I'm not very good with technical stuff sometimes so may have misunderstood.
    Is there something I should have done to the piece before I began color correcting it, like transcoding?

  • Will Final Cut Pro X work with Yosemite

    Will Final Cut Pro X work with Yosemite?

    me too version 10.8. It would have been nice to know yosemite was going to crap out my primary video editing software! I use this for my video editing for my business video production and it would have been nice to know ahead of time or here's a crazy idea how about the software developers who are making millions off final cut pro sales release a fix BEFORE apple roles out yosemite for free. I don't have time to chase down every blog in the world to see issues etc. The reason I bought a mac is I just need it to work so I can work on my business.

  • Will final cut pro X speed up if i upgrade my ram and don't upgrade my processor?  iMac 2.9 GHz i5 with 8 GB ram

    will final cut pro X speed up if i upgrade my ram and don't upgrade my processor?  iMac 2.9 GHz i5 with 8 GB ram

    the most improving effect on 'speed' is distributed media:
    System/App, Projects, Events, Cache, backups on diff. platters. Esp. when using compounds/multicams, each 'angle' on its own drive...
    To improve 'rendering' = export speed, the graphic card is the limiting factor.
    On my slow system, 8GB was nice, 16GBs made it more 'snappier' ...

  • Will Final Cut Pro 5.1 run in OS x 10.5 Leopard?

    Will Final Cut Pro 4.0.1 run in OS x 10.5 Leopard.
    - Does anyone run FCS 5.1 on Leopard Currently?
    - I need a 100% YES before I upgrade Tiger to Leopard
    P.s I know I'm really behind the times, but my philosophy is " If it isn't broken don't fix it.
    Thanks Everybody,
    Tom

    Apparently YES. http://support.apple.com/kb/SP550?viewlocale=en_US
     Cheers, Tom

  • Can Final Cut Pro 5.0.4 run on MAC OS X TowerVersion 10.5.8Processor: Dual 2.7 GHz PowerPC G5Memory: 6 GB

    My questions is simply...
    Can Final Cut Pro 5.0.4 run on MAC OS X TowerVersion 10.5.8Processor: Dual 2.7 GHz PowerPC G5Memory: 6 GB??
    and how do I found out if it is intel based?
    I am trying to sell my mac and there are people asking me very complex questions.

    A G5 is a PPC processor, NOT Intel.
    Final Cut Pro 5 will run on a Power Mac G5.
    Yes, your tower will run it.
    http://support.apple.com/kb/TA23208?viewlocale=en_US

  • I had downloaded and used Final Cut Pro 7 (studio 3) on my mac, but it died. Can I download it to my new computer without buying a new copy? I'm not sure of the number of installations for academic copies. How would I do this?

    I had downloaded and used Final Cut Pro 7 (studio 3) on my mac, but it died. Can I download it to my new computer without buying a new copy? I'm not sure of the number of installations for academic copies. How would I do this?

    AH...good. 
    There is no limit on the times you can install it from the DVDs. There's just a limit as to being able to run it on multiple machines AT THE SAME TIME. If your old computer dies, or you sell it (please reformat the drive so they don't get FCP for free), then you can install on a new computer fine.  And you are allowed to install on (1) desktop and (1) laptop at the same time as well...but only use it on one machine at any given time. Meaning you can use it on the desktop at work, and then when away from the office, on your laptop.
    Long story short...you can install it fine without any issues.

  • How can I install Final Cut Pro 10.0.5 in other Mac?

    Hi,
    I have the Final Cut Pro 10.0.5 in a Mac, and I would like to install it in another one. But I can´t find the way to do it.
    Thank for your answers

    JJust copy it from one machine to the other on a drive. Don't forget to download the additional content.

  • What do I need to do to install Final Cut Studio version 2 on a new Mac Book Pro

    What do I need to do to install Final Cut Studio version 2 on a new Mac Book Pro that does not support power PC anymore

    You need to install Rosetta from a OSX 10.6 install disk.
    FCS2 is intel native, it is only the installer that requires PPC support.
    x

Maybe you are looking for

  • Song plays in iTunes, but file does not show in Finder

    Bizarre issue. My 26,000+ song iTunes Library lives on an external LaCie drive. All the songs play fine in iTunes (and I can hear the drive spin up when I go to play them). However, for a few thousand of the songs, the song's file is not in the physi

  • Write internal table to a file on application server using OPEN DATASET

    I have logical file path and XLS file name. I want to write internal table to a XLS or CSV file on application sever. Please give example.

  • XSLT coding help

    Hi, XSLT Code. <?xml version="1.0" encoding="utf-8"?> <xsl:stylesheet version="2.0" xmlns:xsl="http://www.w3.org/1999/XSL/Transform" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:fn="http://www.w3.org/2005/xpath-functions" xmlns:ns0="http://peopl

  • My mac book air fan is staying on, how can I get it back to normal?

    I cna hear the processor or fan in my Mac Book Air, and it won't stop. Has anyone had a similar problem? Does anyone have any ideas about how I might resolve this issue? Thanks for your help!

  • Material to material conversion

    How its possible in SAP  that  Material to material conversion required in the contract keeping the total quantity remain unchanged. Kindly send me the solution on my mail  Text Removed Edited by: Lakshmipathi on Dec 15, 2011 3:46 PM Dont ask to shar