Will final cut run on macbook

i have a macbook pro 13 early 2011 i5 has any one got final cut running and how does it run
thanks in advance
Ben

It runs, nothing to worry about.

Similar Messages

  • Will Final Cut Express work on a Macbook Core Duo

    I have a 2006 Macbook 2ghz Core Duo with 2gig of Ram. Will Final Cut Express work on this? Will the integrated graphics card affect performance?

    hey there 12frets,
    FCE should run w/out major probs. you should even be able to run a 2nd display up to 23", which would be very handy as the Canvass(playback) window will be rather small on a 13" display.
    FCE System Requirements
    A Mac computer with a 1.25GHz or faster PowerPC G4, PowerPC G5, Intel Core Duo, Intel Core 2 Duo, or Intel Xeon processor
    For AVCHD: A Mac computer with an Intel processor
    1GB of RAM or more
    An AGP or PCI Express graphics card compatible with Quartz Extreme; or an Intel GMA integrated graphics processor in a MacBook or Mac mini computer
    Some FxPlug filters are not compatible with integrated Intel graphics processors.
    A display with 1024-by-768 resolution or higher
    A DVD drive for installation
    Mac OS X v10.4.10 or later
    QuickTime 7.2 or later
    500MB of disk space to install Final Cut Express and LiveType
    Additional 500MB to install LiveType content
    good luck.

  • Will Final Cut Studio even install on a Macbook?

    Hello All,
    Will Final Cut Studio even install on a Macbook?
    I have a G5, the Macbook would be used for quick edits etc.
    Thank you,
    MlCinema
    G5   Mac OS X (10.4.6)  

    This has been asked quite a lot lately. A search for "macbook" yielded these results: http://discussions.apple.com/search.jspa?objID=f939&search=Go&q=macbook
    -DH

  • Will Final Cut Pro 5.1 run in OS x 10.5 Leopard?

    Will Final Cut Pro 4.0.1 run in OS x 10.5 Leopard.
    - Does anyone run FCS 5.1 on Leopard Currently?
    - I need a 100% YES before I upgrade Tiger to Leopard
    P.s I know I'm really behind the times, but my philosophy is " If it isn't broken don't fix it.
    Thanks Everybody,
    Tom

    Apparently YES. http://support.apple.com/kb/SP550?viewlocale=en_US
     Cheers, Tom

  • If I update to Snow Leopard, will final cut pro still work?

    If I update to Snow Leopard, will final cut pro still work? My current version of Final Cut Pro is 6.0.6. Thanks.

    Apple is not telling you the Complete story about Lion.
    The installer for FCP 6 is Power PC code/ IBM CPU code, which Lion does not support.
    FCP 6 is NOT Power PC code, it will run on Lion and Mountain Lion, as I have read on many posts.
    The solution??
    Solution condition where FCP 6 installed and upgrading OS to Lion
    Do nothing, its already running OK
    Solution condition where FCP 6 not installed and OS Lion installed.
    Connect a firewire drive to your MAC and install the old OS on it (eg snow leopard) ,
    Reboot to that OS
    Install FCP 6
    Reboot to your new OS   (EG Lion)
    Run FCP 6

  • Will Final Cut Pro 4.5 still work if I upgrade to Mac OS X v10.5.4?

    Will Final Cut Pro 4.5 still work if I upgrade to Mac OS X v10.5.4?

    I'm with Jon on this one. I know someone who uses FCP 5.0 on a MacBook Pro, he has all sorts of wierd issues including:
    Projects he has created throwing up an error message "Unreadable on this machine" when re-opened.
    Projects losing and refusing to connect to render files.
    Dissolves simply not working -this is not to do with lack of handles, it just happens.
    LiveType and FCP's own title generator files not automatically compositing.
    Lots of kernel panics and unexpected quits.
    These might not happen all the time, but always crop up at the worst possible moment.
    I can move his project files and media to my setup and everything works.

  • Will Final Cut Express 2.0.3 work with Tiger 10.4.4

    Will Final Cut Express 2.0.3 work with Tiger 10.4.4

    We have it running on our iMac G5s. Although it runs reasonably well, there are some teething problems with it. One of them is we cannot capture from a camcorder using timecodes because it just crashes when we try and do that, so we can only capture using the "DV Convertor" mode. Not unreasonable, but slightly annoying.
    We also have the problem that, when we brought some new iMac G5s recently with the iSight built in, it wouldn't work at all because it didn't seem to realise that a PCI-Express graphics card was actually a graphics card at all, and it kept demanding we install an AGP one, which was a bit stupid.
    Apart from that, it's definitely useable. No crashes or anything like that. And we use it daily.

  • Will final cut express work with os maverick

    I am running mountain lion and FCE. will final cut express work with mavericks.?

    A follow-up to my previous post.  FCE 4.0.1 is working fine with Mavericks on the computer at my church (we use it to video-tape sermons and masses for YouTube). 
    A few weeks ago, I purchased a copy of FCE 4.0 from Amazon (one of only two left).  It would NOT work with Mavericks, and there was no upgrade available on the App Store (the only source of software upgrades with Mavericks).  So, I installed FCE on another iMac running Lion.  It installed just fine, and when I went to "Check for New Software" in "the apple", it found the upgrade to 4.0.1, installed it, I copied it to a blank DVD, and installed that on my iMac running Mavericks.  It is working fine.  (HINT TO APPLE: Can we please go back to the simple "Check for Software Updates" instead of the App Store?  Ever since Steve Jobs died everything Apple has become more complicated, not intuitively simple as he made it.)

  • Will Final Cut work with 13 1TB drives daisy chained togerher

    Will Final Cut work with 13 (1TB) Firewire 800 drives daisy chained (78 feet) together? Has any one done this? If so were there any problems?

    Thanks for your advice guys.
    I did run into problems, had to start computer with only my pre-existing SATA and FireWire 800 drives (connected to the back of my Mac), then I made sure the 14 FireWire 800 drives were turned off, attached the FireWire 800 cable to the front of my Mac, turned on the drives from closest to furthest in the drive chain (6'cables between each drive) and all of the drives came up on the desktop.
    When I opened the FCP project that had media associated with the 14 drives I got the spinning wheel of death. After rebooting and restarting the gang of 14 I thought I would try to open one of the drives on the desktop, again the spinning wheel of death. Will move to plan B - 9" cables, plan C is installing the drives into two drive towers.

  • Can edit videos with Final Cut ProX a macbook pro 13 "??, can edit videos with Final Cut ProX a macbook pro 13 "??, can edit videos with Final Cut ProX a macbook pro 13 "??

    can edit videos with Final Cut ProX a macbook pro 13 "??

    Hi p,
    Check out the requirements here: http://support.apple.com/kb/ht4664
    If your MBP meets them, it should work fine.

  • Will final cut Pro 7.0 work with ATI Raedon X1600

    Will Final Cut Pro 7.0 work with a ATI Raedon X1600 Graphics Card

    If you want to check other applications for compatability:
    http://roaringapps.com/apps:table

  • Will Final Cut X use Intel Quick Sync technology?

    Will Final Cut X use the Intel Quick Sync technology available on SandyBridge and future processes to speed up transcoding operations?
    What about if there is a discrete GPU in the system?
    http://www.anandtech.com/show/4083/the-sandy-bridge-review-intel-core-i7-2600k-i 5-2500k-core-i3-2100-tested/8
    A

    Hi all,
    All the developers are under NDA so I didn't say anything before but it is apparent from public domain sources that OSX lion has the APIs for this (which were not available before) so this functionality will be available as soon as Lion is released. Pretty awesome, eh!
    Pi Digital

  • Ok. can any one tell me: will Final Cut Pro 6 fcs2 bundle) install on my GeForce 6600 LE Video Card on my G5 powerpc dual core 2.0? Thanks Much to anyone who can give me a definitive answer. also if not any fix aka .plist?

    ok. can any one tell me: will Final Cut Pro 6 (fcs2 bundle) install on my GeForce 6600 LE Video Card on my G5 powerpc dual core 2.0? Thanks Much to anyone who can give me a definitive answer. also if not any fix aka .plist?

    Look at this technical specs document, your system should be fine with the possible exception of Color.
    As for managing your preference files, use Digital Rebellion's tool.
    Good luck.
    Russ

  • Will final cut pro X 10.0.8  still be available for purchase after the new final cut pro release for mavericks/new macpro in december?

    will final cut pro X 10.0.8  still be available for purchase after the new final cut pro release for mavericks/new macpro in december?

    10.0.8 is no longer available, except in the trial version. The current sale version is 10.0.9. Apple has never sold older versions of their software, only the current version. That's not going to change in the near future.

  • Will Final Cut Express help with...

    I am considering purchasing Final Cut Express for a video project I am working on for my company. I have been using iMovie for a while and have not found a way to overlay a graphic (in this case, our company logo) on top of video. Will Final Cut Express allow me to do this?
    Also, I just shot some video of clients giving testimonials that I would like to turn into marketing pieces. Unfortunately there is a lot of background noise in several of the clips. Does Final Cut Express have any audio tuning features that will help me reduce or remove the background noise?
    Any guidance would be greatly appreciated!

    Will Final Cut Express allow me to do this?
    Yes, easily.
    Does Final Cut Express have any audio tuning features that will help me reduce or remove the background noise?
    Not really. You could try using a noise reduction tool like SoundSaop, but you're best bet is to re-shoot using proper mics and placement.
    -DH

Maybe you are looking for