Will flashing to PR1.2 void my 2 year warranty wit...

I'm a vodafone customer with the Voda 205 firmware which means that I can't update to pr1.2 without flashing my device. Just wanted to know if I do flash my device will my warranty still be valid?
Thanks

The wiki instructions at http://wiki.maemo.org/Updating_the_tablet_firmware point the user to a nokiasite for getting the firmware
http://tablets-dev.nokia.com/nokia_N900.php
That site prompts for IMEI number and then returns a list of "authorized" firmwares. (implied nokia approval)
Since all country varients are listed, and you can use nokia provided tools to do the flash, I personally think it would NOT void the warranty, it's clear here that this particular device is far more open than any other device has been. This is UNLIKE other nokia handsets.
Having said that I purchased a unlocked/generic N900 with UK fimware & it continues to use that fw today.

Similar Messages

I have a cracked iPhone 6 screen. I just bought the phone, but not AppleCare. If I get my iphone screen replaced through apple how much do I pay and would it void my one year warranty with Apple?

I have a cracked iPhone 6 screen. I just bought the phone, but not AppleCare. If I get my iphone screen replaced through apple how much do I pay and would it void my one year warranty with Apple?

To replace your phone's screen costs $109US and I don't see why having Apple replace the screen would void your warranty.
http://www.apple.com/support/iphone/repair/screen-damage/

I want to replace my iPhone 5c for a new one . How much will this cost ? I have my one year warranty but no apple care .

My iphone keeps discharging quickly and it takes long to charge . in 8'hours my phone will charge from 0 to 37% . I went to the apple store and they keep asking me to restore my phone which I did . Now I just want to replace my phone for another . How much will it cost ?

Warranty and Support are only valid in the country of origin. You will need to take the device to whatever country it originally came from.
Apple will not accept shipments from outside the country nor will they return it to an address outside the country.

When will Flash Builder 5 be released?

When will Flash Builder 5 be released?

Good idea, i want work on Flash Builder 5
PS: Suggestion for mossed components since 2004 by Macromedia Inc.
Very old components from Flash MX 2004 / Flash 8 we missed there.
Flex SDK sees **** because xml-list for menu and it sometimes get error like menu doesn't load xml.
I knew about good functions by menu components from MX 2004 / 8 like thios
<instance> is menu component:
package
// Convert from old component by Macromedia into AS3
import components.Menu;
import components.MenuItem; // Idea by SourceSkyBoxer
import flash.Display.Sprite;
import flash.events.MouseEvent;
public class MainApp extends Sprite
private var menu:Menu;
private var fileItem:MenuItem;
private var closeItem:MenuItem;
public function MainApp()
menu = new Menu();
menu.addItem(fileItem);
menu.x = menu.y = 10;
this.addChild(menu);
fileItem = new MenuItem();
fileItem.label = "File";
newItem.addItem(closeItem)
closeItem = new MenuItem();
closeItem.label = "Close an application!";
closeItem.addEventListener(MouseEvent.CLICK, onClickCLose);
private function onClickCLose(mev:MouseEvent):void
// Something function for handler
PS: I really missed Menu Component because MouseEvent.RightCLick / MouseEvent.CONTEXT_MENU are available since Flash Player 9. I am getting crazy because Menu Component from Flash Pro 9, 10, 11 and 12 haven't yet. Now Flex SDK has MouseEvent.CONTEXT_MENU here and i have tested Menu from Flex Component ( Flex SDK 3.6.0a ) = It works fine like i have created example desktop into Flash Player 11
Build by Flex SDK 4.9.11 with MX Version.
But i want go back Flash Pro CS5.5 / Flash Pro CS6. - Did you develop any minimal components for Pure AS3?
And i have tested with Aspiere Component uiMenu and it works fine, too with Away 3D under Flash Builder 4.5
PS: Aspire Components has faked skins like Windows 2k, XP and Vista Skins
There images are Flash Player 12, Aspire Component UI by Ghostwire with Away3D 4.1.6
But Aspire Component sees like Flex Components But they won't work with Away 3D - View3D inside uiWindow was hidden.
For future with Flash Player 13/14 looks like accessed hidden contextmenu like Qooxdoo Frameworks. I want to hide with Flash Player's Contextmenu.
Application's Container should to set to false without contextmenu. = No contextmenu? If they like this.... Thanks for support

My Mac Book Pro was really slow at everything and would kick me out of my photos every time i got on them. now it won't even allow me to log on. i put my password in and the screen will flash white and go back to the login page. HELP please...

My Mac Book Pro was really slow at everything and would kick me out of my photos every time i got on them. now it won't even allow me to log on. i put my password in and the screen will flash white and go back to the login page. HELP please...

There is nothing wrong with your Dell, it will work fine with any MacbookPro. I have been using Dell displays for over 12 years with many different Mac models. I have two 21" Ultra Sharp displays working side by side to design a Keynote presentation right now.
The issue your having is with the way Keynote takes control of the video output to both displays, it sends the presentation signal to one and the presenter display to the other, this is set up in;
Keynote preferences > Presenter display.
If you want to show a wesite or another app on either display, use application switcher:
press the the command key on the keyboard, then the tab key; a row of applications will show what applications are running, choose which one you want to show. Use command > tab to return to Keynote.

Using the mini hdmi cord to connect the macbook air and my tv I cannot seem to have anything appear or be heard on my tv.. the MacBook air will flash blue like it is connecting but nothing will seem to work Any advice?

Using the mini hdmi cord to connect the macbook air and my tv I cannot seem to have anything appear or be heard on my tv.. the MacBook air will flash blue like it is connecting but nothing will seem to work Any advice?

Hi kxh3011,
Thank you for using Apple Support Communities.
This feature is called closed clamshell mode. To learn more about using closed clamshell mode with an external display and how to set it up, please take a look at the article below.
Mac notebooks: How to use your computer in closed clamshell (display closed) mode with an external display
Cheers,
Alex H.

When trying to save a bookmark to a specific pre-established folder the window disappears and will not allow me to make a selection. If I hover in the area it will flash on the screen and disappear again, it's annoying please help!

When I attempt to save a new bookmark and want to save it in a folder the window that typically appears just below the address bar will not stay on the screen. It flashes on the screen and as soon as I move my cursor over it, it disappears. It will not allow me to make a selection of any kind. If I randomly hover over the general area the window will flash back in view but disappear again just as quickly. If I then show all my bookmarks, the bookmark was saved and I have to move it to the folder I actually want it in. Just a few extra steps, but still very annoying. Please help!

DID YOU FIND A SOLUTION???I HAVE TH ASAME THING AS WELL

I am buying a new macbook pro but i want to fit my own ram memory and solid state hard drive , will apple permit this without voiding the waranty.

i am buying a new macbook pro but i want to fit my own ram memory and solid state hard drive , will apple permit this without voiding the waranty.

yes you can do it and not void the warranty. Those are the only hardware changes that Apple permits. Instructions on how to upgrade the ram and remove and replace the hard drive are even included in the owners manuals for MacBook Pros.

My iPhone is not receiving mail but these messages continue to flash at the bottom of the screen: Checking for messages, Updated just now, checking for messages, etc. After a minute or so it will flash downloading 1 - 32 messages but nothing is received

My iPhone is not receiving mail but the following messages continue to flash over and over at the bottom of the screen: "Checking for messages, Updated just now, Checking for messages", etc. After a minute or so it will flash downloading 1 - 32 messages but nothing is received and then the "Checking for Messages," etc. starts back again. I turned the phone off for 30+ minutes and also tried to reset it, but the problem continues. Any ideas on how to solve the problem?

Double click the home button and swipe up the messages app to stop it, then open the app again. This pretty much completely stops the process and freshly opens it again, resolving problems at times. I have had this happen before as well on my iPad, I get a banner, check messages, and nothing new is there.
If that doesn't work, close the app like suggested above, but then restart the phone by holding down the home and lock button for 10-15 seconds until the apple logo appears.

Will Flash CS5 make a flow chart of my AS2 app?

Hi -
This is really a question about whether or not Flash CS5 has a feature that would make my current task easier.
I built a Flash8/AS2 application a few years ago that had quite a complex structure for a novice like me. The app starts with a Splash screen that gives the user 2 basic choices, one of which leads to a navigation menu movie clip which leads to 52 informational videos, and just about as many getURL's to forms at the customer's site. Each video is in a "container" movie clip that also has buttons leading to other mcs with more static information.
It's a very dense tree!
Now my customer is asking for a "Navigation Flow Chart" made in Visio or some such plotting software. That's not a problem but it's arduous, tedious, etc. IF Flash Pro CS5 had a built in widget that would help with such a task, displaying the tree of connections between the movie clips that I could work from, I could get the job done quicker and get some new software too.
Will Flash CS5 generate a "navigation flow chart", a map that shows all the connections between all the movie clips in my app?
Thanks in advance for your input.
jl

hi
there is nothing like that in CS5

When Will flash be available on the iPad ?

When Will flash be available on iPad ? A lot of sites are not working?

itim101 wrote:
Adobe is working on a Flash to HTML5 converter that will convert your Flash applets to HTML5, you can check it out here -http://labs.adobe.com/technologies/wallaby/
Incorrect, Wallaby does not convert Flash applets to html5.
What Wallaby does is allow you to use ONE tool in flash, the timeline, which is used to draw and animate. Nothing else flash does can be exported using wallaby, only timeline animations.
Basically what wallaby does is allows you to make an html5 equivilent of an animated .gif
ZERO code used in flash is exported, meaning zero interactivity can be exported.
Not only does wallaby only export timeline animation in animated gif format for use in html5, but it cant even export filters, like glows, drop shadows etc.
Wallaby simply takes advantage of a new animation element just released on the web called <canvas> it uses canvas to show your animation, exactly like a gif. No interactivity, no code, nothing, simply a stationary animation.
What you do with that animation beyond wallaby is up to you, just like developers have been using animated gif advertisements, wallaby is ment to do the exact same thing, allow advertisers who have simple animation banner ads, publish them to html5 format for use on ios.
Yes that is right... no longer do you have the ability to block ads on ios like you can on all other systems, because your ads very soon will be in a format that you or your computer can not distinguish between actual needed content.
Again, wallaby simply makes html5 versions of animated gifs you build on the timeline, that is all it does, it makes animated gifs.

Flash.display.DisplayObjectContainer.stopAllMovieClips():void

AIR SDK 3.8.0.440 has flash.display.DisplayObjectContainer.stopAllMovieClips():void instead of stopAllChildren(). Is there any change in the behavior (stopAllChildren was not actually working it seems), or is it still unsafe?

Also it seems it's not implemented on Android.

Will Flash Catalyst help "me"?

Flash Catalyst is supposed in bring developers and designers together. But I am one of those hybrids and does the devloping and designing. Usually I will create skins in Illustrator, then import skin artwork in flex, which auto generates the .css file applying each skin to each class, and all I need to do is reference the .css file. So with this in mind will Flash Catalyst help me at all?
I have been using Illustrator for a while now and am comfortable designing with it, so would it really be worth learning a whole new app?
There is one major drawback in the way I do it that I wonder if Catalyst handles. When I skin in illustrator the overall themeColor is built into the skin, so I cannot change the theme color simply by changing the global themColor style. Is this something that is addressed in Catalyst?
Also off topic, does anyone know if Orielly is going to be publishing a "Programming Flex 4" book?
Thanks!

Catalyst is in his early birth stage, so for now it's really slow and memory consuming, you'll spend lot of time importing Illustrator stuff in to your Catalyst project. As to your question regarding themeColor, yes this could be done easily.
Overall, I think Catalyst it's a handy tool to bring creative Designer Idea to live faster than ever, and it would be just ideal for making quick semi-functional sketches just to feel the breath of Idea in test-drive mode. As well it suits for simple applications better, the simplier application is - the more benfit you'll gain out of Catalyst

Will replacing the battery in my MBP void the Apple Care Warranty?

I have a 15 inch 2010 Macbook Pro. I'd like to replace the hard drive, and I've found various videos and sites with instructions. There are two questions that I can't seem to answer though. Are there certain brands or speeds I will need to use, and does replacing the hard drive void the three year Apple Care I bought with the MBP?

Replacing the hard drive does not void the warranty nor AppleCare, though if you cause any damage doing the replacement, that could void the warranty, and of course the warranty will not cover the third-party hard drive. Replacing the battery, as your subject line says, will void the warranty, the battery not being user-replaceable if you do indeed have the 2010 MBP.
Others here can probably comment re. drive type; brand won't matter unless there is a cable for the thermal sensor in the MBP as there is in some other systems in which case drive would have to be of the same brand for the cable connector to match up.
Regards.

My iphone is not turning on, I do not know what to do. Sometimes when I put it on the charger it will flash and show the apple (like its going to turn on) then it will go black then do it again

My iphone is not turning on, I do not know what to do. Sometimes when I put it on the charger it will flash and show the apple (like its going to turn on) then it will go black and then it will do it again. Is there anything Apple can do?

Hello Katia_Jazmin,
The article linked below provides some useful troubleshooting steps that can help get your iPhone to power on.
iOS: Not responding or does not turn on
http://support.apple.com/kb/TS3281
Cheers,
Allen

Will flashing to PR1.2 void my 2 year warranty wit...

Similar Messages

Maybe you are looking for