Will FlashMediaDevServer_4_5 work in Linux RedHat Enterprise 6.5 x64

I have Flashmediaserver 4.5 and a Dell Server running "Red Hat Enterprise Linux Server release 6.5 (Santiago)" Will flashmedia server install and function correctly in this version of Redhat? I know the installdoc says version 5.5 or newer but will it work in 6.5 with no issues? I don't want to install it and have it seem to work fine then find out it is a ticking timebomb or something.

Moving this discussion to the Adobe Media Server forum.

Similar Messages

OEM 2.04 all java will it work with Linux

The new OEM is written in java and the M$ and Solaris version
come on the same cd any idea if porting to Linux is going to
happen. Or if it is possible to kludge it now
null

i'm 99.9% sure that it will work, although you might have to set the Apple TV to 480i first (which is done on the video based menu, so you have to be able to see this first), depending on what model sony and whether it can input progressive or only interlaced video.
also, if the TV does not have the anamorphic squeeze mode, you may have a problem with aspect ratios on content.

OBPM 10.3.1 Configuration issue in Linux (RedHat Enterprise Linux AS rel 4)

Hi,
OBPM enterprise version: OBPM 10.3.1 for WL @ linux, 32 bit version
WLS: 10.3.0
OBPM directory configuration wizard is empty / blank. (graphical mode)
Am using vnc viewer 4.1.1 free edition in my windows XP desktop. I connect to the linux box using the desktop details obtained when vncserver is run in the linux. When OraBPMwlHome/bin/obpmadmcenter is run, the Oracle BPM Admin Center opens up showing the Configuration link. After clicking the Configuration link, another window opens showing the Directory tab. When Add button is clicked, shows up an empty / blank window. I do not see any of the check boxes /radio buttons / buttons. If windows keyboard ESCAPE is done, do you want to cancel this wizard, yes /no comes up.
I tried searching the net and gettig under the documentation, but could not find any resolutions.
Please LMK,
1. how to do hybrid directory service configuration using console mode
2. if any patches to be applied for resolving graphical mode issues.
Thanks & Regards,
Swamy

Hi Ariel,
Thanks a lot for the reply.
I do not see any desktop effects like Compiz, Beryl installed in my windows XP desktop. The X windows client that i am using, the vncviewer, does not seem to have any special X effects. Could you please suggest, how I can disable X effects and any workarounds / alternatives for my linux version.
I also tried using the omni-X windows server (a different box, on windows 2000 server), setting the DISPLAY in the linux box. I face the same problem. The 3rd window (directory type provider selection) is blank.
Appreciate all your help.
Thanks,
Swamy
Edited by: user8994281 on 15-Feb-2010 21:40

Running ocs10g services on Redhat Enterprise linux v4.0

Hello,
How can i run Collaboration Suite Services from linux Redhat Enterprise Linux v4.0?
Thanks
Khaled Fahmy

Can you be more specific?
Do you have a working installation? Is the manual not explaining situations that you are in?
OCS does run on RH 4.
cu
Andreas

SAP Linux Redhat 5.5

Hi Gurus
Has anyone installed SAP ECC 6.0 on Linux Redhat Enterprise 5.5 64 bit. I have a license for Redhat 5 but i want to know if version 5.5 will work with sap so that i download the corect version. I know for sure SAP can be isntalled on Redhat version 5.0 but am not sure with other version after version 5.0. I have checked all the other sites such as Product Availabiity matrix on servive marketplace.
Regards
Partson

Hello,
in some case, you can check this with you hardware and storage vendors to check his matrixs. for example with HP Blades you can read this URL
http://bizsupport2.austin.hp.com/bc/docs/support/SupportManual/c02059206/c02059206.pdf
Regards
Edited by: Diego Hernandez Rollizo on Apr 19, 2010 5:29 PM
Edited by: Diego Hernandez Rollizo on Apr 19, 2010 5:29 PM

Linux redhat 8

hi all
does oracle Oracle9i Enterprise Edition for Linux/IA64, Release 2 (v9.2.0.2) which is the latest version of oracle database can work with redhat linux 8 . in case if it does not work then could you please guid me which version of oracle database do I need to get to work with linux redhat 8 ?
thanks

I think it is but check metalink.oracle.com => Certify and avalaibility to be certain.
Fred

Problem in installing Coldfusion 8 in Redhat Enterprise

I'm trying to install coldfusion 8 (64bit) into my Linux Redhat Enterprise version 5. I can setup everything successfully if using CF default web server.
But when i trying to install CF8 with apache webserver, CF unable to point to the conf file which are exist.
I had downloaded the latest version of apache server 2.2.14 - httpd-2.2.14.tar.gz , and i had make install it.
By default, the location after i installed, i suppose to point it to /usr/local/apache2 , but CF8 unable to locate my conf file.
Any expert can help? I'm really very new to LiNux, stuck this for very long already.
Thanks....

By default, the location after i installed, i suppose to point it to /usr/local/apache2 , but CF8 unable to locate my conf file.
Hi,
I hope you can find it under this location "/etc/httpd/conf".

Crystal Reports Server 2008 V1, RedHat Enterprise Linux, MySQL, ODBC

Iu2019m confused about connecting to an ODBC source from a report within CMC. Iu2019m a Unix guy; I donu2019t know much about Crystal reports, but Iu2019m working with a Crystal guy to get this thing working.
 
First, background: I have installed Crystal Reports Server 2008 V1 in RedHat Enterprise Linux (5.4), and itu2019s running just fine! Iu2019m using the included Tomcat application server, but Iu2019m storing CMS and Audit data our local running copy of MySQL (5.1.42). The RHEL install is native 32-bit (the only way I could get it to work), Crystal is storing and retrieving data from MySQL, The Central Management Console is responding to port 8080 over Tomcat, Iu2019m able to log in and see stuff, and so far, life is good.
 
Now, where Iu2019m stuck: the data weu2019re trying to build reports from also resides in this local Linux / MySQL install, and connecting to it from a report within CMC is where Iu2019m lost.
 
First, I successfully installed the unixODBC and MyODBC drivers in Linux. Iu2019m able to connect to MySQL successfully using the isql utility. Here are my conf files:
 
<pre class="jive-pre"><code class="jive-code jive-java">/etc/odbc.ini
[DSN_NAME]
Driver = MySQL ODBC 5.1 Driver
DATABASE = project_web_prod
DESCRIPTION = Project Description
UID = username
PWD = password
SOCKET = /var/lib/mysql/mysql.sock
/etc/odbcinst.ini
[MySQL ODBC 5.1 Driver]
Driver = /usr/lib/libmyodbc5.so
UsageCount = 1
</code></pre>
 
Again, this all works with isql (Iu2019ve even used both a socket connection, and port 3306, in odbc.ini).
 
Now, our Crystal guy uploads a report into the CMC. I go to Folders -> <Project Folder>, right-click the report I want to test, click Database Configuration, and check the option Use custom database login information specified here. I select database driver ODBC from the dropdown, and type in the server, database, username, and password info. However, when I try to run the report, it fails to connect.
 
So, stupid question, can Crystalu2019s CMC use the system ODBC configuration options? (The ones stored in /etc). Because I saw an odbc.ini file in ~crystalinstalldir/bobje/. I edited it to match the contents of my /etc/odbc[inst].ini files, but to no avail. I saw that Crystal has itu2019s own ODBC engine, but it doesnu2019t support MyODBC driver, does it? I even tried hacking env.sh to use the system unixODBC library instead of the included one, but no luck.
 
So, in short, my question: how do I simply get reports in CMC to connect to a MySQL data source (using ODBC)?
 
Thanks so much! An answer to this question will save my day!
 

Thank you, Efstratios, for the helpful reply!
So, I followed the directions in the PDF file you attached, and everything went smoothly. However, Iu2019m still not able to connect to ODBC within CMC.
Hereu2019s what I did:
<ul style="list-style-type:disc">
<li>Copied the unixODBC libraries over to <installdir>/bobje/enterprise120/linux_x86/odbc/lib</li>
<li>Removed MySQL ODBC connector 5.1, installed MySQL ODBC connector 3.51.</li>
<li>Edited <installdir>/bobje/defaultodbc.ini, added my DSN and MySQL library info as per the instructions (I have both an odbc.ini, and defaultodbc.ini, identical files, just to be safe)</li>
<li>Tested the connection using these libraries, this odbc.ini, and isql. Worked just fine</li>
</ul>
So, my problem seems to be in getting the CMC to actually use my ODBC setup!
Any other hints / things I could try?
When I right-click a report, and go to “Database Configuration,” which connection options should I use for the report? Iu2019ve tried both “Use original database logon information from the report,” and “Use custom database logon information specified here” (using the ODBC option from the drop-down menu). Either way, if I enter in the database, username, password, and then try to run the report (“Run Now”), I get this message in the History: “Failed - Information is needed before this report can be processed.”
Is there another place I could get a more helpful error message? Or is there, perhaps, another way I could test database connectivity from within CMC? I wish there were at least a “Test Database Connection” optionu2026 :P
Thanks so much for your help!

Trying to configure RedHat Enterprise 4.3 linux jumpstart server

I am trying to configure a system under RedHat Enterprise 4.3 linux to jumpstart
a Sun Ultra 60 and install Solaris 9. Web pages and SysAdmin 4/2005 article
"Portable JumpStart Environment" have not addressed my problem. I am using
Internet Systems Consortium DHCP Server V3.0.1. The bootblock is
delivered to the sun client and executes.
The entries in dhcpd.conf conform to those published in various Web
pages and the article "Portable Jumpstart".
The Solaris 9 OS distribution is exported thus:
/wks xxx.xx.xx.0/24(ro,wdelay,no_root_squash,mountpoint)
The load fails upon execution of .../Solaris_9/Tools/Boot/sbin/rcS
I think the problem may be with NFS. The mount request of the
exported filesystem appears to work:
rpc.mountd: authenticated mount request from sunxxx.xx.xx.xx:1023 for /wks/dist/sun/sparc/sunos5.9/9_404/Solaris_9/Tools/Boot (/wks)
The first errors reported are:
/sbin/rcS: /dev/null: cannot open
/sbin/rcS: /dev/null cannot create
I have captured the conversation between the linux jumpstart server and
the Sun client using tcpdump: tcpdump -vvv -s 192 host server and client.
I am not highly skilled at interpreting the tcpdump output; the cause of
the failure is not obvious to me.
I have successfully used a jumpstart server under Solaris 9 for quite some time. ISC DHCP is deployed on the Solaris jumpstart server.
Thank you,
D. Castellano

While some have reported success doing this, I have heard of many failures. The common thread appears to be that when accessing device files, the Solaris client gets back something odd from the Linux NFS server.
Certainly this was the case for every attempt I knew about from a 2.2 kernel and earlier. I have see success reports, but do not have details about exactly which kernel or NFS patches were present.
This works fine from Network appliance and FreeBSD NFS servers, so I think there's some sticky point with the Linux NFS server that just doesn't handle the device files in the same manner.
See this newsgroup post (and the accompanying thread). It contains some discovered issues and some Linux servers that are reported to work.
http://groups.google.com/group/comp.unix.solaris/browse_frm/thread/448f37ee205860c1/e224fe968442d3c3
Darren

Forms 10g certification on Redhat Enterprise Linux 5 ??

Is Forms 10g certified on Redhat Enterprise Linux 5 ??

I don't think. of sure RHEL 5 is not certified for DB 10gR2 and even for OAS 10g.
Even if I have made an installation of DB 10gr2 for RHEL 5 with xen and it's work, meanwhile OAS 10 didn't work!
Anyway,Try to search for certification matrix on Oracle site

Exception signal: 11 (SIGSEGV) on RedHat Enterprise Linux

Oracle 10g XE running on RedHat Enterprise Linux.
Certain operations (in this case a delete) cause Oracle instance to die with Exception signal: 11 (SIGSEGV).
Anyone have any ideas? How do I troubleshoot this, or is it obvious from the trace file entry below that there's a configuration problem?
THANKS FOR ANY HELP!
Relevant section from trace file:
PARSING IN CURSOR #5 len=66 dep=0 uid=36 oct=7 lid=36 tim=1217282870362781 hv=13
17951628 ad='4727614c'
delete from HA_ADDL_COMMISSION where (PRODUCT=:b0 and AGENT=:b1)
END OF STMT
PARSE #5:c=1000,e=49,p=0,cr=0,cu=0,mis=0,r=0,dep=0,og=1,tim=1217282870362779
EXEC #5:c=0,e=240,p=0,cr=1,cu=8,mis=0,r=2,dep=0,og=1,tim=1217282870363056
Exception signal: 11 (SIGSEGV), code: 1 (Address not mapped to object), addr: 0x
1080, PC: [0xa2c6b92, kpoal8()+4230]
Registers:
%eax: 0xffe5b890 %ebx: 0x00000000 %ecx: 0xf7b604a4
%edx: 0x00000000 %edi: 0x00000000 %esi: 0x00000000
%esp: 0xffe59724 %ebp: 0xffe599b4 %eip: 0x0a2c6b92
%efl: 0x00210246
kpoal8()+4217 (0xa2c6b85) je 0xa2c6b8c
kpoal8()+4219 (0xa2c6b87) mov 0xc(%edx),%edx
kpoal8()+4222 (0xa2c6b8a) jmp 0xa2c6b98
kpoal8()+4224 (0xa2c6b8c) mov 0x15c(%ecx),%edx
kpoal8()+4230 (0xa2c6b92) mov 0x1080(%edx),%edxkpoal8()+4236 (0xa2c6b98) mov 0x18(%eax),%ecx
kpoal8()+4239 (0xa2c6b9b) mov %edx,0x14(%ecx)
kpoal8()+4242 (0xa2c6b9e) jmp 0xa2c6690
kpoal8()+4247 (0xa2c6ba3) movzb 0xc2b9a63,%edx
*** 2009-07-01 18:20:59.254
ksedmp: internal or fatal error
ORA-07445: exception encountered: core dump [kpoal8()+4230] [SIGSEGV] [Address n
ot mapped to object] [0x1080] [] []
Current SQL statement for this session:
delete from HA_ADDL_COMMISSION where (PRODUCT=:b0 and AGENT=:b1)
----- Call Stack Trace -----
calling call entry argument values in hex
location type point (? means dubious value)
ksedst()+27 call ksedst1() 1 ? 1 ?
ksedmp()+557 call ksedst() 1 ? 3038 ? F7000000 ?
F7CECF88 ? FFFFFFFF ?
F7CECF80 ?
ssexhd()+863 call ksedmp() 3 ? A2C6B92 ? 616F706B ?
2928386C ? 3332342B ? 30 ?
kpoal8()+4230 signal 00000000 B ? F7CEEC8C ? F7CEED0C ?
opiodr()+835 call 00000000 5E ? 17 ? FFE5B890 ?
ttcpip()+1839 call 00000000 5E ? 17 ? FFE5B890 ? 5 ?
opitsk()+1027 call ttcpip() C6E6D80 ? 5E ? FFE5B890 ? 0 ?
FFE5AD6C ? FFE5B9A0 ?
opiino()+821 call opitsk() 0 ? 0 ?
opiodr()+835 call 00000000 3C ? 4 ? FFE5C460 ?
opidrv()+466 call opiodr() 3C ? 4 ? FFE5C460 ? 0 ?
sou2o()+91 call opidrv() 3C ? 4 ? FFE5C460 ?
08288137 call sou2o() FFE5C444 ? 3C ? 4 ?
FFE5C460 ?
main()+111 call 082880C2 2 ? FFE5C490 ?
__libc_start_main() call 00000000 2 ? FFE5C554 ? FFE5C560 ?
+220 638810 ? 0 ? 1 ?

Sanjay --
I don't know what "set all ORACLE variables" means. Is there a manual page somewhere that explains this? I mean, there are a LOT of variables.
This XE installation works 99.99% of the time, involving hundreds of tables and a large variety of queries, functions, packages, triggers etc. Only this one transaction causes the error, so I'm not sure what additional ORACLE variables would need to be set or modified.
Also, what's the procedure for submitting an SR to Oracle? Do you have a link? I looked at the Oracle site and it seems to require the user to have a commercial support level before anything can be submitted.
Thanks.

Installation Iplanet 4.1 Enterprise Web Server on Linux RedHat 7.1

I am trying to install IPlanet 4.1 Enterprise Web Server on Linux RedHat 7.1.
After unloading the software from CDROM to a temp directory, and run ./setup, I get the following error:
eroor while loading shared libraries; libncurses.so.4: cannot load shared object file : no such file or directory.
Has anyone know how to resolve it??. Thanks.
regards,
Benny Tan

I have answered for this topic previously for another thread. Please follow the URL to see the answer.
http://forum.java.sun.com/thread.jsp?thread=257294&forum=14&message=968185

Unable to install j2sdk-1.4.2 in Redhat Enterprise Linux advanced server v3

When trying to extract j2sdk-1_4_2 on RedHat Enterprise Linux advanced server, I got the message
Do you agree to the above license terms? [yes or no]
tail: bash: No such file or directory
Unpacking...
Checksumming...
1
The download file appears to be corrupted. Please refer
to the Troubleshooting section of the Installation
Instructions on the download page for more information.
Please do not attempt to install this archive file.
The RHEL is with kernel 2.4.21-37. I got the same error message on extracting both binary code and the rpmfile.
Is it because of the command "tail +511 $0 > $outname" ? And any experienses on how to fix it?
Thanks in advance.

checksum have to be exactyly right. Downloading by IE causes often errors - use firefox in downloading and calculate checksum.

Problem while intalling oracle 11i(11.5.9) on Redhat Enterprise Linux 3

Dear all,
we are installing oracle 11i ( 11.5.9) one Redhat Enterprise Linux 3
it gives the following error massage .
Error code received when running external process.check the log file for details._
Running Database Install Driver for PROP instance._
Please any suggestion.
Thanks

Hi,
This is a generic error, so please check the installation log files for more details about the error.
Regards,
Hussein

Making new oracle 10g cluster in redhat enterprise linux

Hy All
i have installed redhat enterprise server in 2 systems and both are attached with SANE network storage. i want to configure oracle 10 g clustering with this setup.
should i have to configure clustering in linux only or there is a feature of clustering in oracle?
if yes than how to do that? i dont have any idea about oracle
please somebody help me
with regards,
ali

Hi Ali!
Hardware clustering is differnet from Oracle clustering.
If you have the database you should investigate RAC http://www.oracle.com/pls/db102/to_toc?pathname=rac.102%2Fb14197%2Ftoc.htm&remark=portal+%28Administration%29
For the Application Server have a look at http://download-uk.oracle.com/docs/cd/B14099_18/core.1012/b14003/toc.htm
Hardware clustering with RedHat could be achieved with Piranha.
cu
Andreas

Will FlashMediaDevServer_4_5 work in Linux RedHat Enterprise 6.5 x64

Similar Messages

Maybe you are looking for