Will FRU 04W3814 pass whitelist (intel 7260 AC Wifi Card)

Will FRU 04W3814 pass whitelist (intel 7260 AC Wifi Card) in a G580 20157?
Solved!
Go to Solution.

hi johnblaazer,
Thanks for Posting!
With the G580 Whitelist,
Im thinking that this will not work.
Here is the List for the G580
Regards
Solid Cruver
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Similar Messages

Are you going to add Intel 7260 AC WiFi card to X230's BIOS whitelist?

Are you going to add Intel 7260 AC WiFi card to X230's BIOS whitelist in the future?
I'm thinking about upgrading my wifi-card to an Intel AC card.
Thank you.

Presently Lenovo Regulatory Notes list consists wifi adapters with AC specification support in the m.2 formfactor only, for the new laptops line on Haswell. Do conclusions yourself.
x220 | i5-2520m | Intel ssd 320 series | Gobi 2000 3G GPS | WiFi
x220 | i5-2520m | hdd 320 | Intel msata ssd 310 series | 3G GPS | WiFi
Do it well, worse becomes itself
Русскоязычное Сообщество English Community Deutsche Community Comunidad en Español

Is it possible to use Intel PROset Wireless/WiFi card on MacBook late 2007 in replacement of Airport?

Will Intel PROset/Wireless WiFi card work on MacBook Late-2007? I don't have an Airport card with me as this MacBook was only given to me from a friend. Also will Mac OS X 10.6 install even though the WiFi card and Bluetooth card is not in the MacBook?
MacBook Late-2007, Mac OS X 10.6, 1GB RAM, 8x SuperDrive, 235GB 5400rpm HDD, Intel Core 2 Duo T8300, Intel GMA Graphics

I would seriously doubt that you will be able to use this card as a replacement for the AirPort Extreme card in your MacBook.
A better option would be to use a wireless USB Wi-Fi adapter instead. You can find these at a number of vendors on the Internet. One would be Other World Computing (OWC).
As far as installing OS X 10.6, you should be able to install it from the OS X installation disk regardless if the AirPort card is missing.

Intel 7260 compatibility before buying a new Envy laptop

Does anyone know if the new envy 17t or 15t laptops with i7 processors are compatible with the intel 7260 ac wireless card or are the new laptops still whitelisted? Looking for laptop that is able to use this card.

The current Envy 17t and 15t models have no BIOS whitelist so you can add an ac card with no issues.

Intel 7260 and Sattelite a665

I just replaced the Intel Advanced 6200 wifi card in my Sattelite A665 with an Intel 7260 2x2 ac wifi card to utilize the ac capability of my new Newgear AC1900 router. I downloaded and installed the newest drivers from Intel and Device manager shows the both the wifi and blue tooth portions of the card working properly and I now have blue tooth connection to my HP printer. I can not see any of my previous wifi connections and Windows 7 trouble shooting says the wifi hardware swith is Off. The "Radio" button does seem to swith the radio on/off, however the orange led light on the front of the laptop doesn't come on like it did with the 6200 card. Is there a compatiblility issue with the A665 and the 7260 card or something else I'm missing. I'm running Win 7 Premium Home Edition with SP1.

I'm still working on this and discovered I was using the wrong Hardware Switch to toggle the wireless mode off and on. there is a shortcut button to the wireless mode above the function keys that is supposed to toggle wireless on/off. I noticed it doesn't work if when the original Intel 6200 wifi card was in. However the true on/off is FN key + F8. That works with the original card. I put the new Intel 7260 in and it installs perfectly with device manager indicating it is working properly and the bluetooth works great too......but no wifi. Then I notice the F8 functionality is now gone so I can not use the hardware switch to turn wifi on.
Has the Toshiba system locked that card out from being funtional on this computer? Any other thoughts? I've tried just about everything discussed on various forums and sites.

X140e and Intel 7260 (FRU: 04W3814)

Hey! I just got my hands on a X140e thinkpad. I wanted to install Linux on it.
According to https://wiki.archlinux.org/index.php/Lenovo_ThinkPad_X140e#Wireless , an aftermarket intel card with FRU 04W3814 should work. The Intel card is also mentioned in the 2.06 BIOS update: http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/gsuj07uc.txt:
- (New) Added support for the Wireless LAN adapter (Intel 7260).
I assumed I just need to:
Update the BIOS (I updated to 2.06)
Switch the cards
Updating the Bios to 2.06 went fine, after installing the card however I can't seem to see it. It doesn't show up in "lspci" and in Windows, it shows up in the device manager, but just as a generic network card and with a yellow exclamation point.
Am I missing something? Are there any additional steps necessary?
For reference, I bought this card: http://www.ebay.com/itm/261541641863
The sticker does mention the FRU

Hello,
Have you tried installing the drivers for the Intel 7260 card while in Windows?
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

Upgrading Wifi-card in T420s ... will an Intel 6300 work? Other recommendations? Modded BIOS?

Hi all,
My trusty T420s (4172-CTO) has been rock solid for years but recently has started having issues with wifi disconnects. I've tried multiple wifi drivers, flashing my router firmware, even a new router. Nothing has helped. I am left with the conclusion that my card (Intel 6250) has got to go.
I am familiar with the whitelisting issue, but was wondering if there was a card I could use instead that would work without a bios mod. I checked the HMM and saw that the Intel Centrino Ultimate-N 6300, FRU 60Y3233, is listed for my application. I can get one on ebay fairly cheap. But, I see the 6300 has three antennas, not two like my 6250. Does this mean it won't work in my T420s? Would I just leave one of them disconnected? Which one?
Is there another card, already whitelisted, that would work?
Failing this option, I will go with another card (Intel 7260 unless somone has a better idea) and a modded BIOS. I have found a couple of forums and threads that walk through the process (and provide the BIOSes) but if someone has a recommendation for a site/service to use, I'd appreciate a heads up via PM as I can see such discussion isn't likely weclcome publicly.
Thanks, all.
-kj-
T440p | Core i7 4700MQ @ 2.4 ghz | 8 GB | Samsung 840 EVO 240gb SSD | 14" | Intel HD Graphics | Windows 7 Pro 64-bit
Solved!
Go to Solution.

Thanks for the reply. What do you mean "2.4 GHz WiFi reliability is a hit or miss"?
Warranty is over so no problem there.
I see a lot of 7260 cards, is there one in specific I need? Example:
http://goo.gl/PKcRIU
http://goo.gl/ooaUEw
N would actually be fine, don't really need AC, recently upgraded my router and don't feel compelled to change...the price difference is small, and I'm all for future-proofing, but, I just need the thing to WORK.
Thanks again.
-kj-
T440p | Core i7 4700MQ @ 2.4 ghz | 8 GB | Samsung 840 EVO 240gb SSD | 14" | Intel HD Graphics | Windows 7 Pro 64-bit

[SOLVED] Intel 7260 Vaio can't connect to wifi

Hi there,
First off, I should mention that I know my way around Linux but I'm pretty new to Arch, so there might be things that I know that don't apply here.
So, I have this problem with this network, I can't connect to it and frankly I don't know why. I was on Ubuntu until a few days ago and I still had the problem. I posted on the Ubuntu forum >>here<< and I was told to upgrade, but as I've been willing to move to Arch for quite some time, I thought that was maybe the time. BUT, the problem is still there, which worries me.
To sum it up, about one or two weeks ago, I was connecting fine to this network (ZyXEL) and then after a reboot, no way to connect to it, no matter what I try. I have noticed an error message that keeps coming back all the time (see below) and the wifi indicator in i3status sometimes flashes me with an IP while I'm trying to connect then eventually the network disappears (not with wicd, only nm). Those are basically the symptoms.
$ dmesg | grep iwlwifi
[ 1.194191] iwlwifi 0000:01:00.0: enabling device (0000 -> 0002)
[ 1.194323] iwlwifi 0000:01:00.0: irq 61 for MSI/MSI-X
[ 1.267714] iwlwifi 0000:01:00.0: loaded firmware version 23.214.9.0 op_mode iwlmvm
[ 1.284399] iwlwifi 0000:01:00.0: Detected Intel(R) Dual Band Wireless N 7260, REV=0x144
[ 1.284446] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 1.284661] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 2.896518] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 2.896733] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 35.768085] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 35.768302] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 35.793332] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 35.793549] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 38.129138] iwlwifi 0000:01:00.0: No association and the time event is over already...
[ 71.084001] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 71.084217] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 118.185693] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 118.185910] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 118.209937] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 118.210144] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 124.174397] iwlwifi 0000:01:00.0: No association and the time event is over already...
[ 153.151555] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 153.151772] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 165.160036] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 165.160253] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 1340.258296] iwlwifi 0000:01:00.0: irq 61 for MSI/MSI-X
[ 1340.258601] iwlwifi 0000:01:00.0: loaded firmware version 23.214.9.0 op_mode iwlmvm
[ 1340.270580] iwlwifi 0000:01:00.0: Detected Intel(R) Dual Band Wireless N 7260, REV=0x144
[ 1340.270628] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 1340.270841] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 1347.384442] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 1347.384657] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 1353.661509] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 1353.661719] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 1353.799948] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 1353.800167] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 1356.145940] iwlwifi 0000:01:00.0: No association and the time event is over already...
[ 1380.497704] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
[ 1380.497933] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S
I have had troubles with the wifi in the past (from what I read on the internet, this card is not yet fully supported everywhere) but nothing like this. Usually, disconnecting and reconnecting did the trick, sometimes I had to restart NetworkManager in extreme cases, but nothing more.
I tried a lot of things (modprobe, rfkill, firmware update, etc), rebooted everything I could but couldn't do anything. I have found bug reports and forums posts of similar problems but the solutions there either didn't work for me or the problem just seem to have disappeared for some people. I read that this card was not really supported before the kernel 3.11 or 3.13 but now I have 3.16 and it's still there. What's really bugging me is that I could successfully connect to this network a couple weeks ago...
On the Ubuntu forum, they have a script that displays useful information when posting about wireless problems. I have taken off the Ubuntu specific bits and I think this will save you some time asking me to run commands. One thing is not mentioned in the script: I use wicd.
########## wireless info START ##########
Report from: 17 Oct 2014 18:59 UTC +0000
Booted last: 17 Oct 2014 00:00 UTC +0000
Script from: 20 Sep 2014 23:04 UTC +0000
##### kernel ############################
Linux 3.16.4-1-ARCH #1 SMP PREEMPT Mon Oct 6 08:22:27 CEST 2014 x86_64 unknown unknown GNU/Linux
Parameters: rw, quiet
##### lspci #############################
01:00.0 Network controller [0280]: Intel Corporation Wireless 7260 [8086:08b1] (rev 6b)
Subsystem: Intel Corporation Dual Band Wireless-N 7260 [8086:c060]
Kernel driver in use: iwlwifi
##### lsusb #############################
Bus 001 Device 002: ID 8087:8000 Intel Corp.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 003 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 002 Device 003: ID 8087:07dc Intel Corp.
Bus 002 Device 002: ID 0bda:5727 Realtek Semiconductor Corp.
Bus 002 Device 005: ID 18d1:4ee3 Google Inc. Nexus 4 (tether)
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
##### PCMCIA card info ##################
##### rfkill ############################
0: sony-wifi: Wireless LAN
Soft blocked: no
Hard blocked: no
1: sony-bluetooth: Bluetooth
Soft blocked: no
Hard blocked: no
2: nfc0: NFC
Soft blocked: no
Hard blocked: no
3: phy0: Wireless LAN
Soft blocked: no
Hard blocked: no
4: hci0: Bluetooth
Soft blocked: no
Hard blocked: no
##### lsmod #############################
iwlmvm 161824 0
led_class 12859 1 iwlmvm
mac80211 514630 1 iwlmvm
iwlwifi 156837 1 iwlmvm
cfg80211 454161 3 iwlwifi,mac80211,iwlmvm
rfkill 18867 4 nfc,cfg80211,sony_laptop,bluetooth
##### ifconfig ##########################
enp0s20u2: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 1500
inet 192.168.42.23 netmask 255.255.255.0 broadcast 192.168.42.255
inet6 fe80::744f:54ff:febd:2e32 prefixlen 64 scopeid 0x20<link>
ether <MAC address> txqueuelen 1000 (Ethernet)
RX packets 33475 bytes 45223932 (43.1 MiB)
RX errors 1 dropped 0 overruns 0 frame 1
TX packets 20285 bytes 2774716 (2.6 MiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
lo: flags=73<UP,LOOPBACK,RUNNING> mtu 65536
inet 127.0.0.1 netmask 255.0.0.0
inet6 ::1 prefixlen 128 scopeid 0x10<host>
loop txqueuelen 0 (Local Loopback)
RX packets 44 bytes 2200 (2.1 KiB)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 44 bytes 2200 (2.1 KiB)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
wlp1s0: flags=4099<UP,BROADCAST,MULTICAST> mtu 1500
ether <MAC address> txqueuelen 1000 (Ethernet)
RX packets 0 bytes 0 (0.0 B)
RX errors 0 dropped 0 overruns 0 frame 0
TX packets 5 bytes 876 (876.0 B)
TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0
##### iwconfig ##########################
lo no wireless extensions.
enp0s20u2 no wireless extensions.
wlp1s0 IEEE 802.11abg ESSID:off/any
Mode:Managed Frequency:2.437 GHz Access Point: Not-Associated
Tx-Power=22 dBm
Retry short limit:7 RTS thr:off Fragment thr:off
Power Management:off
##### route #############################
Kernel IP routing table
Destination Gateway Genmask Flags Metric Ref Use Iface
0.0.0.0 192.168.42.129 0.0.0.0 UG 203 0 0 enp0s20u2
192.168.42.0 0.0.0.0 255.255.255.0 U 203 0 0 enp0s20u2
##### resolv.conf #######################
nameserver 192.168.42.129
##### iw reg get ########################
country 00: DFS-UNSET
(2402 - 2472 @ 40), (6, 20)
(2457 - 2482 @ 40), (6, 20), PASSIVE-SCAN
(2474 - 2494 @ 20), (6, 20), NO-OFDM, PASSIVE-SCAN
(5170 - 5250 @ 160), (6, 20), PASSIVE-SCAN
(5250 - 5330 @ 160), (6, 20), DFS, PASSIVE-SCAN
(5490 - 5730 @ 160), (6, 20), DFS, PASSIVE-SCAN
##### iwlist channels ###################
lo no frequency information.
enp0s20u2 no frequency information.
wlp1s0 32 channels in total; available frequencies :
Channel 01 : 2.412 GHz
Channel 02 : 2.417 GHz
Channel 03 : 2.422 GHz
Channel 04 : 2.427 GHz
Channel 05 : 2.432 GHz
Channel 06 : 2.437 GHz
Channel 07 : 2.442 GHz
Channel 08 : 2.447 GHz
Channel 09 : 2.452 GHz
Channel 10 : 2.457 GHz
Channel 11 : 2.462 GHz
Channel 12 : 2.467 GHz
Channel 13 : 2.472 GHz
Channel 36 : 5.18 GHz
Channel 40 : 5.2 GHz
Channel 44 : 5.22 GHz
Channel 48 : 5.24 GHz
Channel 52 : 5.26 GHz
Channel 56 : 5.28 GHz
Channel 60 : 5.3 GHz
Channel 64 : 5.32 GHz
Channel 100 : 5.5 GHz
Channel 104 : 5.52 GHz
Channel 108 : 5.54 GHz
Channel 112 : 5.56 GHz
Channel 116 : 5.58 GHz
Channel 120 : 5.6 GHz
Channel 124 : 5.62 GHz
Channel 128 : 5.64 GHz
Channel 132 : 5.66 GHz
Channel 136 : 5.68 GHz
Channel 140 : 5.7 GHz
Current Frequency:2.437 GHz (Channel 6)
##### iwlist scan #######################
Channel occupancy:
1 APs on Frequency:2.412 GHz (Channel 1)
3 APs on Frequency:2.437 GHz (Channel 6)
wlp1s0 Scan completed :
Cell 01 - Address: <MAC 'Kasafe' [AC1]>
Channel:1
Frequency:2.412 GHz (Channel 1)
Quality=33/70 Signal level=-77 dBm
Encryption key:on
ESSID:"Kasafe"
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
9 Mb/s; 12 Mb/s; 18 Mb/s
Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s
Mode:Master
Extra:tsf=000000c2d190f93f
Extra: Last beacon: 36ms ago
IE: WPA Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : TKIP CCMP
Authentication Suites (1) : PSK
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : TKIP
Pairwise Ciphers (2) : TKIP CCMP
Authentication Suites (1) : PSK
Cell 02 - Address: <MAC 'ZyXEL' [AC2]>
Channel:6
Frequency:2.437 GHz (Channel 6)
Quality=45/70 Signal level=-65 dBm
Encryption key:off
ESSID:"ZyXEL"
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 6 Mb/s
9 Mb/s; 12 Mb/s; 18 Mb/s
Bit Rates:24 Mb/s; 36 Mb/s; 48 Mb/s; 54 Mb/s
Mode:Master
Extra:tsf=0000007974f64404
Extra: Last beacon: 36ms ago
Cell 03 - Address: <MAC 'HITRON-CC00' [AC3]>
Channel:6
Frequency:2.437 GHz (Channel 6)
Quality=49/70 Signal level=-61 dBm
Encryption key:on
ESSID:"HITRON-CC00"
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 9 Mb/s
18 Mb/s; 36 Mb/s; 54 Mb/s
Bit Rates:6 Mb/s; 12 Mb/s; 24 Mb/s; 48 Mb/s
Mode:Master
Extra:tsf=lo Interface doesn't support scanning.
enp0s20u2 Interface doesn't support scanning.
000000041172a69f
Extra: Last beacon: 36ms ago
IE: WPA Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : PSK
IE: IEEE 802.11i/WPA2 Version 1
Group Cipher : CCMP
Pairwise Ciphers (1) : CCMP
Authentication Suites (1) : PSK
Cell 04 - Address: <MAC 'KD WLAN Hotspot+' [AC4]>
Channel:6
Frequency:2.437 GHz (Channel 6)
Quality=51/70 Signal level=-59 dBm
Encryption key:off
ESSID:"KD WLAN Hotspot+"
Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 9 Mb/s
18 Mb/s; 36 Mb/s; 54 Mb/s
Bit Rates:6 Mb/s; 12 Mb/s; 24 Mb/s; 48 Mb/s
Mode:Master
Extra:tsf=000000041172acb1
Extra: Last beacon: 36ms ago
##### module infos ######################
[iwlmvm]
filename: /lib/modules/3.16.4-1-ARCH/kernel/drivers/net/wireless/iwlwifi/mvm/iwlmvm.ko.gz
license: GPL
author: Copyright(c) 2003- 2014 Intel Corporation <[email protected]>
version: in-tree:
description: The new Intel(R) wireless AGN driver for Linux
srcversion: D67526D799CF939C2A2C228
depends: iwlwifi,mac80211,led-class,cfg80211
intree: Y
vermagic: 3.16.4-1-ARCH SMP preempt mod_unload modversions
parm: init_dbg:set to true to debug an ASSERT in INIT fw (default: false (bool)
parm: power_scheme:power management scheme: 1-active, 2-balanced, 3-low power, default: 2 (int)
[mac80211]
filename: /lib/modules/3.16.4-1-ARCH/kernel/net/mac80211/mac80211.ko.gz
license: GPL
description: IEEE 802.11 subsystem
depends: cfg80211
intree: Y
vermagic: 3.16.4-1-ARCH SMP preempt mod_unload modversions
parm: max_nullfunc_tries:Maximum nullfunc tx tries before disconnecting (reason 4). (int)
parm: max_probe_tries:Maximum probe tries before disconnecting (reason 4). (int)
parm: beacon_loss_count:Number of beacon intervals before we decide beacon was lost. (int)
parm: probe_wait_ms:Maximum time(ms) to wait for probe response before disconnecting (reason 4). (int)
parm: ieee80211_default_rc_algo:Default rate control algorithm for mac80211 to use (charp)
[iwlwifi]
filename: /lib/modules/3.16.4-1-ARCH/kernel/drivers/net/wireless/iwlwifi/iwlwifi.ko.gz
license: GPL
author: Copyright(c) 2003- 2014 Intel Corporation <[email protected]>
version: in-tree:
description: Intel(R) Wireless WiFi driver for Linux
firmware: iwlwifi-100-5.ucode
firmware: iwlwifi-1000-5.ucode
firmware: iwlwifi-135-6.ucode
firmware: iwlwifi-105-6.ucode
firmware: iwlwifi-2030-6.ucode
firmware: iwlwifi-2000-6.ucode
firmware: iwlwifi-5150-2.ucode
firmware: iwlwifi-5000-5.ucode
firmware: iwlwifi-6000g2b-6.ucode
firmware: iwlwifi-6000g2a-5.ucode
firmware: iwlwifi-6050-5.ucode
firmware: iwlwifi-6000-4.ucode
firmware: iwlwifi-7265-9.ucode
firmware: iwlwifi-3160-9.ucode
firmware: iwlwifi-7260-9.ucode
firmware: iwlwifi-8000-8.ucode
srcversion: E52619966602F14805A714C
depends: cfg80211
intree: Y
vermagic: 3.16.4-1-ARCH SMP preempt mod_unload modversions
parm: swcrypto:using crypto in software (default 0 [hardware]) (int)
parm: 11n_disable:disable 11n functionality, bitmap: 1: full, 2: disable agg TX, 4: disable agg RX, 8 enable agg TX (uint)
parm: amsdu_size_8K:enable 8K amsdu size (default 0) (int)
parm: fw_restart:restart firmware in case of error (default true) (bool)
parm: antenna_coupling:specify antenna coupling in dB (defualt: 0 dB) (int)
parm: wd_disable:Disable stuck queue watchdog timer 0=system default, 1=disable (default: 1) (int)
parm: nvm_file:NVM file name (charp)
parm: uapsd_disable:disable U-APSD functionality (default: N) (bool)
parm: bt_coex_active:enable wifi/bt co-exist (default: enable) (bool)
parm: led_mode:0=system default, 1=On(RF On)/Off(RF Off), 2=blinking, 3=Off (default: 0) (int)
parm: power_save:enable WiFi power management (default: disable) (bool)
parm: power_level:default power save level (range from 1 - 5, default: 1) (int)
[cfg80211]
filename: /lib/modules/3.16.4-1-ARCH/kernel/net/wireless/cfg80211.ko.gz
description: wireless configuration support
license: GPL
author: Johannes Berg
depends: rfkill
intree: Y
vermagic: 3.16.4-1-ARCH SMP preempt mod_unload modversions
parm: ieee80211_regdom:IEEE 802.11 regulatory domain code (charp)
parm: cfg80211_disable_40mhz_24ghz:Disable 40MHz support in the 2.4GHz band (bool)
##### module parameters #################
[iwlmvm]
init_dbg: N
power_scheme: 2
[mac80211]
beacon_loss_count: 7
ieee80211_default_rc_algo: minstrel_ht
max_nullfunc_tries: 2
max_probe_tries: 5
probe_wait_ms: 500
[iwlwifi]
11n_disable: 1
amsdu_size_8K: 0
antenna_coupling: 0
bt_coex_active: Y
fw_restart: Y
led_mode: 0
nvm_file: (null)
power_level: 0
power_save: N
swcrypto: 0
uapsd_disable: N
wd_disable: 1
[cfg80211]
cfg80211_disable_40mhz_24ghz: N
ieee80211_regdom: 00
##### /etc/modules ######################
grep: /etc/modules: No such file or directory
##### modprobe options ##################
[/etc/modprobe.d/iwlwifi.conf]
options iwlwifi 11n_disable=1
##### pm-utils ##########################
[/etc/pm/sleep.d/90alsa] (755 root)
case "$1" in
hibernate|suspend)
thaw|resume)
aplay -d 1 /dev/zero
*) exit $NA
esac
##### udev rules ########################
grep: /etc/udev/rules.d/*net*.rules: No such file or directory
##### dmesg #############################
[ 1.284399] iwlwifi 0000:01:00.0: Detected Intel(R) Dual Band Wireless N 7260, REV=0x144
[ 1.284446] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S (repeated 2 times)
[ 1.466756] ieee80211 phy0: Selected rate control algorithm 'iwl-mvm-rs'
[ 1.490496] systemd-udevd[155]: renamed network interface wlan0 to wlp1s0
[ 1.630021] Bluetooth: hci0: Intel Bluetooth firmware file: intel/ibt-hw-37.7.10-fw-1.80.2.3.d.bseq
[ 1.832900] Bluetooth: hci0: Intel Bluetooth firmware patch completed and activated
[ 2.896518] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S (repeated 2 times)
[ 2.907963] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 35.768085] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S (repeated 2 times)
[ 35.781194] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 35.793332] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S (repeated 2 times)
[ 35.804522] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 37.819461] wlp1s0: authenticate with <MAC 'ZyXEL' [AC2]>
[ 37.821532] wlp1s0: send auth to <MAC 'ZyXEL' [AC2]> (try 1/3)
[ 37.825568] wlp1s0: authenticated
[ 37.828298] wlp1s0: associate with <MAC 'ZyXEL' [AC2]> (try 1/3)
[ 37.830866] wlp1s0: RX AssocResp from <MAC 'ZyXEL' [AC2]> (capab=0x421 status=0 aid=6)
[ 37.839183] wlp1s0: associated
[ 37.839217] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[ 38.129138] iwlwifi 0000:01:00.0: No association and the time event is over already...
[ 38.129174] wlp1s0: Connection to AP <MAC 'ZyXEL' [AC2]> lost
[ 71.084001] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S (repeated 2 times)
[ 71.096522] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 118.185693] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S (repeated 2 times)
[ 118.198363] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 118.209937] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S (repeated 2 times)
[ 118.220741] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 123.864974] wlp1s0: authenticate with <MAC 'ZyXEL' [AC2]>
[ 123.867270] wlp1s0: send auth to <MAC 'ZyXEL' [AC2]> (try 1/3)
[ 123.882206] wlp1s0: authenticated
[ 123.884469] wlp1s0: associate with <MAC 'ZyXEL' [AC2]> (try 1/3)
[ 123.887219] wlp1s0: RX AssocResp from <MAC 'ZyXEL' [AC2]> (capab=0x421 status=0 aid=6)
[ 123.900889] wlp1s0: associated
[ 123.900917] IPv6: ADDRCONF(NETDEV_CHANGE): wlp1s0: link becomes ready
[ 124.174397] iwlwifi 0000:01:00.0: No association and the time event is over already...
[ 124.174433] wlp1s0: Connection to AP <MAC 'ZyXEL' [AC2]> lost
[ 153.151555] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S (repeated 2 times)
[ 153.163679] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
[ 161.468177] systemd-udevd[684]: renamed network interface usb0 to enp0s20u2
[ 165.160036] iwlwifi 0000:01:00.0: L1 Disabled; Enabling L0S (repeated 2 times)
[ 165.172167] IPv6: ADDRCONF(NETDEV_UP): wlp1s0: link is not ready
########## wireless info END ############
Thank you in advance for your help, if you need me to try anything, please ask!
Last edited by damwdan (2014-11-10 11:24:22)

I have the exact same problem, appeared completely random. I had several restarts this Christmas on the laptop, even after upgrades. I blamed the ath driver. But I noticed when I restart the router by plugging out it from the wall, then in again, sometimes it's working.
I carefully changed every possible settings in the router, then I found if I disable IPv6 (yes, it's capable of that despite Sky does not provide IPv6 service) it started to work even after multiple reboots. It took mi a while since the new year.
I'm using connman and when it was wrong, connman was completely frozen. If I entered "connmanctl scan wifi", it never quit. Same for "connmanctl state".
I also noticed that the router LED was blinking continuously and on the laptop when I checked the connection status with ifconfig it showed very high usage of TX packets. It also blocked the whole wifi, so my phone was not able to access the internet. Strange problem, I'm unsure what caused it and not quite sure how disabling IPv6 solved it. But I'm also afraid that maybe somewhere else I can't disable IPv6 on the router.

Dv9000 can board support intel ac 7260 wifi card

i'd like to upgrade my wireless card from an intel 4965agn to the intel wireless-ac 7260 on a Pavilion dv9000 laptop.
is there any way to update the bios which will allow the system to recognize the ac 7260 as a supported network device?
if not, is there any other tool that can scan your machine and identify your upgrade possibilities for a wireless network card based on the bios that you currently have?

BigRo wrote:
i'd like to upgrade my wireless card from an intel 4965agn to the intel wireless-ac 7260 on a Pavilion dv9000 laptop.
is there any way to update the bios which will allow the system to recognize the ac 7260 as a supported network device?
if not, is there any other tool that can scan your machine and identify your upgrade possibilities for a wireless network card based on the bios that you currently have?
Hi,
That card is the best chip you can have on that laptop. The laptop is too old to support the AC standard and the Intel chip supports up to 300Mbps and both wireless bands (2.4/5GHz). That is a pretty good wifi because some HP laptop series can't even upgrade to a dual band wifi card such as yours or Intel 6235 etc..
Dv6-7000 /Full HD/Core i5-3360M/GF 650M/Corsair 8GB/Intel 7260AC/Samsung Pro 256GB
Testing - HP 15-p000
HP Touchpad provided by HP
Currently on Debian Wheeze
*Please, help other users with the same issue by marking your solved topics as "Accept as Solution"*

Wifi issue on System76 (Intel 7260)

Hi all,
I've been having this issue on certain wireless networks where the wireless just stops working but stays connected and the only indication anything is wrong is when you go to load a page.
All I have to go in is the dmesg:
[ 3904.597032] ------------[ cut here ]------------
[ 3904.597061] WARNING: CPU: 4 PID: 2271 at net/wireless/reg.c:1806 reg_process_hint+0x2d1/0x460 [cfg80211]()
[ 3904.597063] Modules linked in: fuse ctr ccm snd_hda_codec_hdmi joydev mousedev ec_sys bnep ecb btusb i915 bluetooth snd_hda_codec_via snd_hda_codec_generic 6lowpan_iphc drm_kms_helper snd_hda_intel snd_hda_controller vboxdrv(O) drm snd_hda_codec intel_gtt snd_hwdep tpm_infineon arc4 btrfs xor snd_pcm mac_hid i2c_algo_bit tpm_tis mei_me raid6_pq iwlmvm led_class mac80211 iTCO_wdt iTCO_vendor_support evdev iwlwifi cfg80211 rfkill rtsx_pci_ms memstick psmouse i2c_i801 pcspkr mei serio_raw tpm shpchp lpc_ich nfs coretemp hwmon x86_pkg_temp_thermal intel_powerclamp kvm_intel kvm crct10dif_pclmul crc32_pclmul crc32c_intel ghash_clmulni_intel aesni_intel aes_x86_64 lrw gf128mul glue_helper ablk_helper cryptd microcode snd_timer i2c_core thermal snd soundcore e1000e ptp pps_core video lockd ac processor
[ 3904.597125] battery wmi button sunrpc fscache ext4 crc16 mbcache jbd2 sd_mod crc_t10dif crct10dif_common rtsx_pci_sdmmc mmc_core atkbd libps2 ahci libahci libata ehci_pci xhci_hcd ehci_hcd scsi_mod usbcore rtsx_pci usb_common i8042 serio
[ 3904.597151] CPU: 4 PID: 2271 Comm: kworker/4:1 Tainted: G W O 3.16.2-1-ck #1
[ 3904.597154] Hardware name: System76, Inc. Galago UltraPro/W740SU , BIOS 4.6.5 12/12/2013
[ 3904.597162] Workqueue: events reg_todo [cfg80211]
[ 3904.597165] 0000000000000000 000000000c67a316 ffff88036aaa7d50 ffffffff81508c6b
[ 3904.597169] 0000000000000000 ffff88036aaa7d88 ffffffff8106cffd ffff8803c2c6c300
[ 3904.597173] ffff880408690260 ffff8803c2c6c31c ffff88041fb17600 0ffff88041fb1760
[ 3904.597177] Call Trace:
[ 3904.597185] [<ffffffff81508c6b>] dump_stack+0x4d/0x6f
[ 3904.597191] [<ffffffff8106cffd>] warn_slowpath_common+0x7d/0xa0
[ 3904.597195] [<ffffffff8106d12a>] warn_slowpath_null+0x1a/0x20
[ 3904.597203] [<ffffffffa04b1311>] reg_process_hint+0x2d1/0x460 [cfg80211]
[ 3904.597211] [<ffffffffa04b1519>] reg_todo+0x79/0x1a0 [cfg80211]
[ 3904.597218] [<ffffffff8108989b>] process_one_work+0x16b/0x460
[ 3904.597222] [<ffffffff81089edb>] worker_thread+0x6b/0x550
[ 3904.597227] [<ffffffff81089e70>] ? init_pwq.part.25+0x10/0x10
[ 3904.597232] [<ffffffff8109019a>] kthread+0xea/0x100
[ 3904.597236] [<ffffffff810900b0>] ? kthread_create_on_node+0x1b0/0x1b0
[ 3904.597240] [<ffffffff8150eefc>] ret_from_fork+0x7c/0xb0
[ 3904.597244] [<ffffffff810900b0>] ? kthread_create_on_node+0x1b0/0x1b0
[ 3904.597246] ---[ end trace 280abc5ce5b473e3 ]---
[ 3904.597249] cfg80211: Calling CRDA for country: US
[ 4145.061302] wlp3s0: authenticate with c8:f9:f9:a0:32:0f
[ 4145.063818] wlp3s0: send auth to c8:f9:f9:a0:32:0f (try 1/3)
[ 4145.064093] cfg80211: Calling CRDA to update world regulatory domain
[ 4145.064516] wlp3s0: authenticated
[ 4145.065486] wlp3s0: associate with c8:f9:f9:a0:32:0f (try 1/3)
[ 4145.067271] wlp3s0: RX AssocResp from c8:f9:f9:a0:32:0f (capab=0x11 status=0 aid=2)
[ 4145.068136] wlp3s0: associated
[ 4145.068185] cfg80211: Calling CRDA to update world regulatory domain
[ 4145.372574] cfg80211: Calling CRDA to update world regulatory domain
Everything I have found on the issue seems to be older and people solve it by updating firmware, I have check my firmware and I have the newest ones that others have said solved their issue:
[andrew@Andrew-Ultrapro ~]$ ls -al /lib/firmware/ | grep 7260
-rw-r--r-- 1 root root 683236 Aug 28 12:08 iwlwifi-7260-7.ucode
-rw-r--r-- 1 root root 679780 Aug 28 12:08 iwlwifi-7260-8.ucode
-rw-r--r-- 1 root root 679380 Aug 28 12:08 iwlwifi-7260-9.ucode
Any help at all resolving this would be greatly appreciated.

I am only familiar with the Intel 7260/7265. They have a setting called U-APSD.
If this is enabled you will see this behaviour.
If you find this setting on your card, you can try to disable it.

I'm trying to downgrade my icloud storage; however, my MAC book will not upgrade pass 10.6.8 and I don't have my iphone anymore. If there another way for me to do this?

I'm trying to downgrade my icloud storage; however, my MAC book will not upgrade pass 10.6.8 and I don't have my iphone anymore. If there another way for me to do this? I've tried everything I can find online and of course my coverage has expired and can't call the support team.

Hello Lara,
have you already called Apple and explained your current situation, because I don't see a way to downgrade your storage plan with a Mac only running Snow Leopard and without a iOS device running at least iOS 5.
Best regards.

Intel 7260 does not work on open networks/filtered ports

Hi Everyone! I made sure to check if this was posted before and tried to fix everything I could before asking you guys. For the past few days, I have been using Android wifi tethering as I was unable to get the speed up above 1000 B/s at my school. This means that the pings work, but I am unable to do anything else.
I have the latest kernel and the latest firmware (downloaded from the iwlwifi kernel.org section) and am currently using NetworkManager. My wifi works on my WPA network at home, but nowhere else. This is a fresh install of Arch running Gnome.
Laptop model: ASUS Q302LA
Outputs of my stuff:
lspci gives me:
00:00.0 Host bridge: Intel Corporation Haswell-ULT DRAM Controller (rev 0b)
00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 0b)
00:03.0 Audio device: Intel Corporation Haswell-ULT HD Audio Controller (rev 0b)
00:04.0 Signal processing controller: Intel Corporation Device 0a03 (rev 0b)
00:14.0 USB controller: Intel Corporation 8 Series USB xHCI HC (rev 04)
00:16.0 Communication controller: Intel Corporation 8 Series HECI #0 (rev 04)
00:1b.0 Audio device: Intel Corporation 8 Series HD Audio Controller (rev 04)
00:1c.0 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 1 (rev e4)
00:1c.3 PCI bridge: Intel Corporation 8 Series PCI Express Root Port 4 (rev e4)
00:1d.0 USB controller: Intel Corporation 8 Series USB EHCI #1 (rev 04)
00:1f.0 ISA bridge: Intel Corporation 8 Series LPC Controller (rev 04)
00:1f.2 SATA controller: Intel Corporation 8 Series SATA Controller 1 [AHCI mode] (rev 04)
00:1f.3 SMBus: Intel Corporation 8 Series SMBus Controller (rev 04)
02:00.0 Network controller: Intel Corporation Wireless 7260 (rev cb)
uname -r is:
3.18.6-1-ARCH
Config on the settings is all the automatic ones. I get the signal strength and the speed but data transfers at a ridiculously slow rate. When I had Windows, it was 50 Mb/S.
If you need anything else, I can give you all you need.
All ports are filtered.
Thank you for helping. If this is in the wrong section, feel free to move it.

For people that end up stumbling upon this thread: I talked to the IT director at my school and he said that it's normal for Linux (using open source drivers) users to find problems with connection. (Also, the USB wifi card I tried did not work.) As of now, it's a problem on the provider's end. If you can, ask them to update their "wifi stuff" and if that doesn't work, see if you can get them to secure the network with WPA2/PSK. (Probably won't happen) I was fortunate that I contacted him during the planning phase for securing the wifi and only had to wait a few days.
Keep it Simple

I reset my iPhone 5 now it will not go pass the activation part. It keeps saying activation error

I reset my iPhone 5 now it will not go pass the activation part. It keeps saying activation error

is your iphone jailbroken?

Why will my Mac 8,1 intel desktop not stay in sleep mode for more than 5 seconds?

Why will my Mac 8,1 intel desktop not stay in sleep mode for more than 5 seconds?
Have tried repeatedly and end up shutting down instead of "sleeping:.

Hello, most usually it's some USB device causing that, but...
One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
Reboot, test again.
If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts (Users & Groups in later OSX versions)>Login Items window to see if it or something relevant is listed. Or an errant process eating up RAM.
Check the System Preferences>Other Row, for 3rd party Pref Panes.
Also look in these if they exist, some are invisible...
/private/var/run/StartupItems
/Library/StartupItems
/System/Library/StartupItems
/System/Library/LaunchDaemons
/Library/LaunchDaemons

Will Muse run on the Intel Celeron 1007U 1.5 GHz

Hello!
Tell me, please, will Muse run on the Intel Celeron 1007U 1.5 GHz ?
I understand that in system requirements stands "2 GHz or faster", but maybe the program will run on 1.5 Ghs, not fast and good, but will? Or not?
Thank you

Hello
For Muse you need Intel Pentium 4 or AMD Athlon 64 processor (2 GHz or faster) with 64-bit support.
More information - http://helpx.adobe.com/muse/system-requirements.html
Regards,
Prateek

Will FRU 04W3814 pass whitelist (intel 7260 AC Wifi Card)

Similar Messages

Maybe you are looking for