Will GRC AC RAR (CC) add value to SOA  based SAP implementation?

Hello GRC Experts,
I thought of asking other GRC experts to get their opinions on the GRC AC RAR for the following scenario:
These days there are numerous SAP clients implementing SOA based Composite Applications using the CAF. These SAP PORTAL applications use Adaptive RFC (direct calls) and Web services calls (thru PI/middleware) to the back end SAP applications to complete the 75-100% of the work. The remaining 0-25% work may be completed using the transaction codes. There are also calls to the back end systems originating from non-SAP applications using the web services via some middleware tool to complete the 100% work.
When the GRC AC RAR deals only transaction codes and their associated authorization objects, how do you assess the risk for this type of access in GRC AC RAR and how do you build a custom rules matrix for this type of applications?
Thanks,
Himadama

Hello again,
Has anyone implemented SAP GRC RAR for the SOA based application? What are the challenges faced? If this is not possible, then anyone has any idea if this is covered in GRC AC 2010 version.
Regards,
Himadama

Similar Messages

  • Will SAP CRM add value to me?

    Hi Guys, This is Thabresh from Chennai,India.I need a clarification on whether sap crm will be suitable for me l have 3yrs experience totally...First 18 months in barclays finance in channel sales and next 18 months in Scope international as an CRM end user where i used to handle portfolio of standard chartered bank uae customers over the phone... Let me know if SAP CRM will add value to me

    Hi
    1. Which CRM application you were working on when you were in Stan Chart? Is it SAP CRM? Every CRM application is different and has it's specific user interface.
    2. The customer service role which you working in currently is totally different than what you actually implement or support in SAP CRM.
    3. The background of sales and marketing or working knowledge of retails, manufacturing, healthcare industry etc would have been an added advantage.
    4. SAP CRM as a software involves mapping of business processes in SAP. Even if you do not have SAP background but if you could have the working experience in above mentioned indutry it will be helpful.
    5. Also, usually IT firms (in INDIA), would prefer to take candidates (even if they do not have SAP background) with engineering+MBA background.
    6. But you want to make a career in SAP CRM, you would have to undergone training + certification from SAP Authorised Education partner. You can find more information on the same on SAP web site. You may find the SAP authorised education partner in Chennai also.
    Hope this will be useful.
    Regards

  • Add values to userfields problem

    Hello all,
    I use SBO 2004 and a try add values to fields in user table. I have a few questions:
    - when I create table and fields I use UserTableMD and UserFieldMD. I create numeric fields with editable = 10. When I see on this table and this field in Enterprise Manager this field is int type. I don't know what's up.
    oUserFieldsMD.TableName = "@wbank"
    oUserFieldsMD.Name = "saldo"
    oUserFieldsMD.Description = "Saldo konta"
    oUserFieldsMD.Type = SAPbobsCOM.BoFieldTypes.db_Numeric
    oUserFieldsMD.EditSize = 10
    lRetCode = oUserFieldsMD.Add
            If lRetCode <> 0 Then
                oCompany.GetLastError(lErrCode, sErrMsg)
                MsgBox(sErrMsg)
            Else
                MsgBox("Field: '" & oUserFieldsMD.Name & "' was added successfuly to " & oUserFieldsMD.TableName & " Table")
            End If
    - next when I try add value to field appear error:
    Inwrite KontoStr is OK, but if I will inwrite saldo_poczatkowe appear error:      "The entered value does not match the specified field type."
    saldo_poczatkowe is double type. On start I read editbox value, change "." to "," and cast it to double and inwrite in saldo_poczatkowe.
    SaldoStr = SaldoKonta.Value
    SaldoStr = CleanOutput(SaldoStr)
    saldo_poczatkowe = Val(SaldoStr)
    Try inwrite:
    oUserTable.Code = 1
    oUserTable.Name = "wyciag"
    oUserTable.UserFields.Fields.Item("U_konto").Value = KontoStr
    oUserTable.UserFields.Fields.Item("U_saldo").Value = saldo_poczatkowe I try inwrite values in all fields )            
    oUserTable.UserFields.Fields.Item
                '// add the data to the Data base
                oUserTable.Add()
                '// Check for errors
                oCompany.GetLastError(lErrCode, sErrMsg)
                If lErrCode <> 0 Then
                    MsgBox(sErrMsg)
                Else
                    MsgBox("Record saved in DB successfuly")
                End If
                oUserTable = Nothing
                System.GC.Collect()
    Mayby I do error in code? Thanks for help
    Krzysztof Sala

    Hi Krzysztof,
    I mean when you add the field the to database
    oUserFieldsMD.subType = SAPbobsCOM.BoFieldSubTypes....
    BoFldSubTypes EnumerationDescription
    Indicate special field types supported by the SAP Business One application. Use this enumeration when working with User Defined Fields.
    Members
    Member Description
    st_None  No special sub-type.  0 
    st_Address  Address format.  63 
    st_Phone  Phone format.  35 
    st_Time  Time format.  84 
    st_Rate  Double format with the system's rate accuracy.  82 
    st_Sum  Double format with the system's summery accuracy.  83 
    st_Price  Double format with the system's price accuracy.  80 
    st_Quantity  Double format with the system's quantity accuracy.  81 
    st_Percentage  Double format with the system's percentage accuracy.  37 
    st_Measurement  Double format with the system's measurement accuracy.  77 
    st_Link  Link format (mostly used for a web site links).  66 
    st_Image  Image format.  73 
    regards
    Ad

  • Add values in Dropdown list

    Hi,
    My reqiurement is to add values in Dropdown list which is standard one. Already threre some values are there, like
    hourly,daily,wekly.
    Now I need to add montly value to the above dropdown list.How this can be done.
    Suggest me.
    Thanks,
    Brahmaji

    Hi,
    Expand the Attribute Period_type and double click on its GET_V method.
    You will find following code line :
    lr_ddlb->set_selection_table( me->job_wizard ).
    Double click on the Set_selection_table method to open the method code.
    You will find a LOOP.. ENDLOOP there. Here,to remove the values, comment out this LOOP- ENDLOOP.
    and  add following lines
             ls_ddlb-key   = 'Y'.
            ls_ddlb-value = 'Yearly'.
            APPEND ls_ddlb TO me->ddlb.
    Thats All .
    Hope it Helps.
    Regards,
    Suchita

  • External XML data files to add values to drop down lists

    I would like to have external XML data files to add values to drop down lists in my form.. But when i create a data connection it is working properly only in the Preview in Livecycle Designer.. but not in the PDF form(Adobe Reader). Moreover im not sure whether it will work in the form manager..!plzz help me!
    Raghava Kumar V.S.S.

    Hi,
    For the case of raghavakumar, Is it really that I need to have LiveCycle Reader Extensions? Is there any other way that could do the same?
    Thank you

  • Add value days (VALTG) causing invoice split

    Hello!
    I'm currently having a problem with field VALTG in sales order which is an invoice splitting criteria.
    Additional value days was added to a pricing condition in VK12, by mistake. This value has been removed.
    But created sales orders during this time now has this value in table VBKD and re-pricing of the orders does not remove the value. How can I fix this?
    Appreciate ASAP answers as our invoicing is put on hold.
    Best regards, Carina Karlsson

    Hii,
    Use the T-Code Mass
    Give the business object BUS2032  and Execute
    Select sales order business Item data MASSSDPOSVBKD
    Select the field (Add.value days (MASS) MASSSDPOSVBKD-VALTG) and execute
    now select the sales order range and give the value which u want to change
    Hope it will solve the problem.
    Regards
    Shambhu Sarkar
    Edited by: SHAMBHU SARKAR on Sep 7, 2011 1:52 PM

  • How to connect old aiport express to my new Airport Extreme? My Ipad says "base station e5713b cannot be configured" and my AirPort tool on my PC will not permit me to add my new Airport Extreme network (no network names to choose from)

    How to connect old aiport express to my new Airport Extreme?
    I have a PC running with Win7 and just replaced my Jensen With a brand New Airport Extreme.
    I have set up the Airport Extreme to the internet, Iphones and Ipads and it work as it should.
    I have downloaded latest Version of Airport tool on my PC. In addition i have downloaded the airport tool for Ipad.
    I have reset one of my airport Express and it now shows up both on the Ipad and on the PC airport tool.
    My Ipad says "base station e5713b cannot be configured."
    I have wired the airport Express to my Ethernet to be able to "see it" on my Airport tool.
    My AirPort tool on the PC will not permit me to add the airport Express to my new Airport Extreme network (no network names on the drop-down list to choose from). I wished for an easy set-up, but nothing seems to be plug and play as the Commercial says.. can you please help me?
    Sigve

    Hi
    Thanks for Swift reply.
    Yep - I in fact have two A1088 and one A1264
    I actually bought the new router because the Jensen
    router always lost connection to the Airport Express after some hours or days. I
    always needed to restart my Jensen to play music and that was driving my wife
    mad. The hope was that the Extreme should fix this. Both A1088 have been set up
    to only stream music to two of my stereo amplifiers from my PC’s Itunes library.
    Are the A1088 now useless?
    The A1264 has been set up to feed internet into a Denon Reciever that needed Ethernet cable.
    Please advise
    Regards
    Sigve

  • My calendar will no longer let me add new event or delete them, it comes up with an error saying "cannot save event, no end date set" or "event does not belong to that event store". can anyone help with this?

    my calendar will no longer let me add new event or delete them, it comes up with an error saying "cannot save event, no end date set" or "event does not belong to that event store". can anyone help with this?

    Hi,
    To configure your ODBC DataSource, go to Control Panel ---> DataSources(ODBC) (If you are in a Windows environment).
    Select the tab System DSN. If you have not added your data source, then do so by clicking on the Add button. If you have added the datasource, click on the Configure button to configure it.
    Give the datasource name, then the database name.
    You have to give the hostname, service name and server name. I guess, in most cases, the datasource name and host name will be the same, service name and server name will be the same. If you are using TCP/IP, the protocol will be onsoctcp.
    There will be a file named Services under C:\WINNT\system32\drivers\etc where you have to give the port number for accessing this server.
    It will be like this <service name> <portnumber>/tcp
    Hope this helps...
    best wishes,
    Nish

  • ITunes Match will no longer let me add my PC... Help?

    iTunes Match will no longer let me add my PC.  As it is, about 50% of the time that I have opened iTunes for the last year, I've gotten an error stating that iTunes Match has encountered an error and I would need to re-login.  This is on my main PC, the one with all of my music stored on the HDD. So, everytime, I sign out and re-sign in, and iTunes match takes a good bit of time and comes back on line.  Today, it asked me to sign in again, and it told me that I can't add my PC because I have too many devices on the account.  Right now, aside from this desktop PC, I have my work PC and my MacBook Pro. I had an old work PC, but I was careful to de-authorize before losing that computer.  Thus, I don't have many computers on the iTunes match account.  I *do* have a lot of iOS devices that I use with iTunes match, but I've had those for a while.  Is this the issue or is there something else? 
    Thanks!

    Welcome to this forum. This is a BT domestic customer to customer help forum, any messages posted here do not go to BT.
    Can you try the modem plugged directly into the master socket without any ADSL filters. You will lose your broadband connection during the test, but it will eliminate any problem with the BT Home hub, or the microfilter.
    ADSL does not start until 30kHz, which is well above the range that an analogue modem works at.
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Is it possible to add value item and non stock item in one billing?

    Is it possible to add value item and non stock item in one billing?

    Hi,
    Yes,it is possible .Take example of service scenario,where material used in servicing and service charges(labour) can be billed in single invoice.
    Billing document type,Customer and other header data should be same.
    Reward points if useful
    Regards,
    Amrish Purohit

  • Add value field to existing/ productive operating concern

    Dear All,
    I need to create a new value field and add it to an existing operating concern, which is already in use (there is already transaction data in the live system).
    In my opinion I have to do the following steps:
    1. Create new value field (KEA6).
    2. Add value field to operating concern (KEA0).
    3. Activate operating concern (KEA0).
    4. Transport operating concern (KE3I).
    Is that strategy ok?
    Is it ok, to transport an operating concern, when the system is already "live" and there is transaction data in the system?
    Thanks for your answers,
    Regards,
    Michael

    Hi,
    first create new value field in KEA6. then take those new Value field in your operating concern Data Structure in t-code KEA0. Then generate the operating Concern.
    Regards,
    Sreekanth

  • How can I add values on a Drop Down by Index Webdynpro Element?

    Hi every body
    Can anybody help me?
    How can I add values on a Drop Down by Index Webdynpro Element?
    How can I invoque my element on the Implementation Webdynpro?

    Hi Jesus,
    You can add elements to your DDbyIndex like this:
    //Example: Popular un Dropdown by Index usando Nodos de contexto  
    // NODE[Card: 1..n, Sele:1..1]  Si es obligatorio;            ||    NODE[Card: 0..n, Sele:0..1]  Si no es obligatorio y se puede dejar en blanco
    //Assuming we created a node called "Source", with a string attribute called "Texto" binded to the dropdownbyindex
    for (int i = 1; i <= 101; i++)
         ISourceElement sourceElement = wdContext.createSourceElement();
           sourceElement.setTexto("Text number "+i);
           wdContext.nodeSource().addElement(sourceElement);
    Regards.
    Julio Herrera

  • How can I add values on a Drop Down by Index Webdynpro Element by a Model?

    How can I add values on a Drop Down by Index Webdynpro Element with a Model RFC?

    Hi Jesus,
    Please use the below code for DropDownByIndex Elements :-
    Suppose you have model node ABC and attribute xyz. Now you have created custom node CustNode and attribute CustAtt.
    ICustNodeElement  ele = null;
    if(wdContext.nodeABC().size > 0)
                  for(int i=0; i< CustNode< wdContext.nodeABC().size; i++
         ele = wdContext. createCustNode();
                          ele.setCustAtt(wdContext.nodeABC().getABCElementAt(i).getXYZ)
         wdContext.nodeCustNode.add(ele);
    Refer to http://help.sap.com/saphelp_nw70/helpdata/en/3b/f1754276e4c153e10000000a1550b0/frameset.htm
    Best Regards
    Arun Jaiswal

  • Premiere Elements 12 will not allow me to add any more 'Default Text'

    Premiere Elements 12 will not allow me to add any more 'Default Text'. Being using it fine up until today! Created over 80 words so far for subtitles but for some reason it wont allow me today!!!

    Dave
    Thanks for the follow up. Interesting result.
    What is the specific Music Score that you used in the Premiere Elements 12/12.1 Mac Soundtrack that was limiting you in the number of words that could be included as text in the project's opened Titler?
    Please confirm
    a. Working in Expert workspace or Quick workspace?
    and
    b. Was the 12.1 Update in effect before and after you observed that the Music Score soundtrack removal resolved the issue of number of words limit in the Titler?
    and
    c. Did the Titler problem exist if you replace the Music Score soundtrack with a non Music Score music file?
    and
    d. If you moved the Music Score soundtrack to one of the numbered Audio Tracks, did the Titler problem exist?
    If you have no Music Score soundtrack in the project, create your title of 80 plus words in the Titler, close the Titler, and then bring the Music
    Score soundtrack to the project's Soundtrack, does that strategy work for you?
    The above information will help me to think about what happened in your case and give me more insight into how to prevent it happening to
    you in future projects.
    Thanks.
    ATR

  • Ios 8.3 will not allow me to add a contact to group message

    ios 8.3 will not allow me to add a contact to group message.  When I touch "Details" on a group message (says "Group MMS" at the top), THERE IS NO OPTION TO ADD CONTACT.  Why not?  iPhone 6.

    I had tried that previously with no results. So, I changed the password with the provider. Next I resubmitted the ID and password, ignoring the Yahoo button, but instead choosing the Other button. It was successful. Sometimes it's necessary to change the playing field, rather than put up with the potholes. Thanks for your help.

Maybe you are looking for