Will I lose data if I upgrade from Leopard to Snow Leopard?

I have OS X version 10.5.8 (Leopard).  I bought Snow Leopard 10.6.3 to upgrade my OS but have not installed it yet. I plan to upgrade to the latest OS (Yosemite) for free after upgrading to Snow Leopard.  Will I lose data by doing this? 

99.9% of the time: no, but there's always a (extremely little) chance that something goes wrong, so make sure you set up Time Machine before upgrading.

Similar Messages

  • Will I lose iDVD if I upgrade from Snow Leopard to Mavericks?

    I am getting ready to upgrade from 10.6.8 to Mavericks, and I have a few questions on my MacBookPro.
    1) Is there a way to keep iDVD when I upgrade?
    2) How does Microsoft Office 2008 play with Mavericks, specifically Word and Entourage?
    3)  Is there any reason NOT to upgrade?  I have already done a complete backup using Time Machine. 
    Lisa

    Carolyn,
    Thank you for the answer.  Um, I am not sure what it said  . . . However, I did do more checking on exactly which model I have.  On the chart, the Model Identifier MacBookPro5,3 was listed, but not 5,4.
    This is what hardware I have: 
    Hardware Overview:
      Model Name: MacBook Pro
      Model Identifier: MacBookPro5,4
      Processor Name: Intel Core 2 Duo
      Processor Speed: 2.53 GHz
      Number Of Processors: 1
      Total Number Of Cores: 2
      L2 Cache: 3 MB
      Memory: 4 GB
      Bus Speed: 1.07 GHz
      Boot ROM Version: MBP53.00AC.B03
      SMC Version (system): 1.49f2
    How do I tell what will and won't work well with Mavericks?  I don't know if 1) I should upgrade, and 2) what should I upgrade to, based on the information you listed in your tips. 
    Thanks for any help you can give!
    Lisa

  • Will I lose my photo library upgrading from iPhoto 7.1.5

    Hi, I just upgraded my OS to Lion (I was going to wait until Mountain Lion came out but apparantley my macbook (2008) is too old to support it). Anyway, I want access to the icloud and after upgrading to Lion, I discovered that I needed to upgrade my iphoto as well. Should I be concerned about losing my photos with this upgrade?

    No
    Unless something goes wrong which is why you always have a good backup before upgradating or upgrading
    LN

  • HT201250 will i lose everything when I upgrade my mac

    Hi - I have the disc to upgrade my mac to Snow Leopard. I don't have an external hard drive to back up. If I install the disc will I lose all my documents/photos/music etc?

    If everything works perfectly, you should not lose your data.
    I don't know about you but I never trust my data "to everything running perfectly". So I in fact back it up twice just to be sure.
    IMHO I would hold off the upgrade until you have a disk for backup.
    The questions is never will I lose data because that is a certainly. The question is when will it happen. Hence the reason to backup.
    Allan

  • Is there a step by step guide on upgrading from leopard to lion inlcuding data backup and migration?

    is there a step by step guide on upgrading from leopard to lion inlcuding data backup and migration?

    Let me just give you the breakdown:
    Snow Leopard (10.6) needs to be purchased. You need Snow Leopard because it has the Mac App StoreAlternatively, you could get the Lion USB drive, but much more expensive
    Once you have installed Snow Leopard, open the Mac App Store and find OS X Lion. This downloads OS X Lion Installer. After the download finishes, click on it, follow the steps and the installation begins!
    No data will be lost during any of the upgrades
    Let me know if you have any further questions.

  • I upgraded from leopard to lion and my epson printer will not work. I get a communication error

    I upgraded from leopard to lion and my Epson printer will not work. I get a error message comunication error. What can Ido to fix this I bought a new USB cord and it did no good.

    I suddenly had the same thing happen. I've had my new iMac for 3 months and at first my Epson Artisan 50 worked okay then yesterday I started getting the same error message other people on this support site have gotten. I tried ALL the advice given (deleating the Epson files from the library folder, etc. reinstalling older software) and nothing worked. With the newest iMac (and operating system) you cannot pick and choose which version of Epson software you want. You must use the 10.8 version or it simply will not open when you've downloaded it. Finally I found the comment above by den.thed and tried the OS X Mountain Lion: Reset the printing system suggested. As much as I hated to lose all my printing presets that took a lot of expiermentation to set up, I was desperate. I tried it and it worked. Now I just have to consult my old computer and try to recreate all my printing set ups.  So to others with Epson / Apple 10.8 issues this may help when everything else fails. Thanks den.thed for your advice.

  • Issue with list saving data after sites upgrade from sharepoint 2010 to sharepoint 2013

    Issue with list saving data after sites upgrade from sharepoint 2010 to sharepoint 2013 
    Newform.aspx of list:-
    Custom List is not saving data sometimes in the new form after 15 minutes and only blank entry record got created without saving data, even though some columns are mandatory fields?

    Hello dcakumar,
    Sounds like a strang issue. If you can reproduce this can you see some errors in the ULS logs?
    - Dennis | Netherlands | Blog |
    Twitter

  • What happens to iweb-built site when I upgrade from Leopard (10.5.8) to Snow Leopard (10.6.3), and subsequently upgrade to 10.6.8 or even 10.7? Will fonts stay the same? Will layout change? Or anything else change? Thanks

    What happens to iweb-build site when I upgrade from Leopard (10.5.8) to Snow Leopard (10.6.3) and subsequently update that to 10.6.8 or even to 10.7? Evidently iweb has been discontinued. I have version 3.0.3 of iweb now but understand that there's been an update for OS 10.6 so same question goes for this update.
    Will fonts change? Will layout change? Will widgets still work? Links? Will Google Analytics PlugIn still work?
    (Since MobileMe is disappearing, I now save iweb site to local folder on my computer, then upload it to GoDaddy using Cyberduck. I run Google Analytics plug in on folder before its uploaded.)
    My computer, MacBook Pro came with iweb, which has been updated to 3.0.3. Since iweb is discontinued, will upgrade of operating system just ignore iweb so that iweb will run the same as before? Or will it wipe it out? Or change how it currently works (questions above).
    Thanks

    As you now know iWeb and iDVD have been discontinued by Apple. This is evidenced by the fact that new Macs are shipping with iLife 11 installed but without iWeb and iDVD.
    On June 30, 2012 MobileMe will be shutdown. HOWEVER, iWeb will still continue to work but without the following:
    Features No Longer Available Once MobileMe is Discontinued:
    ◼ Password protection
    ◼ Blog and photo comments
    ◼ Blog search
    ◼ Hit counter
    ◼ MobileMe Gallery
    All of these features can be replaced with 3rd party options.
    Currently if the site is published directly from iWeb to the 3rd party server the RSS feed and slideshow subscription features will work. However, if the site is first published to a folder on the hard drive and then uploaded to the sever with a 3rd party FTP client those two features will be broken.
    There's another problem and that's with iWeb's popup slideshows.  Once the MMe servers are no longer online the popup slideshow buttons will not display their images.
    Click to view full size
    However, Roddy McKay and I have figured out a way to modify existing sites with those slideshows and iWeb itself so that those images will display as expected once MobileMe servers are gone.  How to is described in this tutorial: iW14 - Modify iWeb So Popup Slideshows Will Work After MobileMe is Discontinued.
    NOTE: the iLife 11 boxed version Is no longer available at the online Apple Store.  To get a copy you'll have to try Amazon.com or eBay.com.
    This may be of interest to you: Life After MobileMe.
    OT

  • I've encountered 4HDD/11/40000000 SATA(0,0). AFTER SOME RESEARCH IN APPLE COMMUNITY, I LEARNT THAT IT'S A HARDWARE ISSUE. SO I WILL BE TAKING MY MACBOOK PRO TO NEAREST APPLE STORE. MY QUE IS, WILL IT BE FIXED IF I UPGRADE FROM OSX 10.8.5 TO MAVERICKS?

    I've encountered 4HDD/11/40000000 SATA(0,0). AFTER SOME RESEARCH IN APPLE COMMUNITY, I LEARNT THAT IT'S A HARDWARE ISSUE. SO I WILL BE TAKING MY MACBOOK PRO TO NEAREST APPLE STORE. MY QUE IS, WILL IT BE FIXED IF I UPGRADE FROM OSX 10.8.5 TO MAVERICKS? What other options do I have? What can be an approximate cost for fixing this problem?

    Of course not. It's a hardware problem, so it can't be fixed by upgrading software. The only option you have got is to take the MacBook to an Apple Store or reseller.
    That error indicates a problem with the hard drive. What you have to do is to make a backup of your files and take the MacBook to an Apple Store or reseller, so they can confirm that the problem is the hard drive and not the SATA connector, which could be worse.
    If it's a hard drive issue, it's not expensive (about $100-200, depending on the hard drive). If it's a SATA connector issue, the whole logic board may have to be replaced.
    Note that you can replace the hard drive yourself if you want, but the cost between doing it yourself and taking the MacBook to an Apple Store or reseller is similar

  • Will a FCP 3.0.4 upgrade from FCP 1 load onto a new Mac Pro

    Will a FCP 3.0.4 upgrade from FCP 1 load onto a new Mac Pro. I have tried loading in onto a mac book with no luck. I think its because my original FCP 1 loades using OS9 and because the new Mac Pro does not have an old operating system on it I cant load my original FCP.

    You should upgrade to FCP 5.1 or 6 as Jerry says.
    However, if you are desperate you could try this :-
    Install just your FCP 3 upgrade and also put in your FCP 1 serial number when asked.
    Whenever you try to open FCP you will probably get an error message. Click the "esc" key and FCP should open.

  • If I make a new iTunes account will I lose my app music etc from my old account

    If I make a new iTunes account will I lose my app music etc from my old account

    1. No.
    2. Not as long as you're still syncing it with the same iTunes library. If you meant iTunes libraries and not iTunes Store accounts to begin with, you need to use the Transfer Purchases function in iTunes.
    (72824)

  • Will i lose data stored on icloud if i reset my iphone

    Will I lose data saved in icloud if i reset my phone?

    Welcome to the Apple community.
    No, all the iCloud data will remain in the cloud if you reset your phone. After reset and you log back into your iCloud account, all the data will be restored to your phone.

  • Will i lose youtube if i upgrade to os6

    will i lose youtube if i upgrade to os6

    Ya you will lose it, but you should still upgrade and just redownloade it beacuse they new things they added are nice.

  • Will I lose photos when I upgrade to maverick

    Will I lose photos when I upgrade iPhoto to maverick

    No. But backup everything first.
    Basic Backup
    For some people Time Machine will be more than adequate. Time Machine is part of OS X. There are two components:
    1. A Time Machine preferences panel as part of System Preferences;
    2. A Time Machine application located in the Applications folder. It is
         used to manage backups and to restore backups. Time Machine
         requires a backup drive that is at least twice the capacity of the
         drive being backed up.
    3. Time Machine requires a backup drive that is at least double the
         capacity of the drive(s) it backs up.
    Alternatively, get an external drive at least equal in size to the internal hard drive and make (and maintain) a bootable clone/backup. You can make a bootable clone using the Restore option of Disk Utility. You can also make and maintain clones with good backup software. My personal recommendations are (order is not significant):
      1. Carbon Copy Cloner
      2. Get Backup
      3. Deja Vu
      4. SuperDuper!
      5. Synk Pro
      6. Tri-Backup
    Visit The XLab FAQs and read the FAQ on backup and restore.  Also read How to Back Up and Restore Your Files. For help with using Time Machine visit Pondini's Time Machine FAQ for help with all things Time Machine.
    Although you can buy a complete external drive system, you can also put one together if you are so inclined.  It's relatively easy and only requires a Phillips head screwdriver (typically.)  You can purchase hard drives separately.  This gives you an opportunity to shop for the best prices on a hard drive of your choice.  Reliable brands include Seagate, Hitachi, Western Digital, Toshiba, and Fujitsu.  You can find reviews and benchmarks on many drives at Storage Review.
    Enclosures for FireWire and USB are readily available.  You can find only FireWire enclosures, only USB enclosures, and enclosures that feature multiple ports.  I would stress getting enclosures that use the Oxford chipsets especially for Firewire drives (911, 921, 922, for example.)  You can find enclosures at places such as;
      1. Cool Drives
      2. OWC
      3. WiebeTech
      4. Firewire Direct
      5. California Drives
      6. NewEgg
    All you need do is remove a case cover, mount the hard drive in the enclosure and connect the cables, then re-attach the case cover.  Usually the only tool required is a small or medium Phillips screwdriver.

  • If I run disc utility (thinking probable startup issues, also had kernal panic?) will i lose data?

    Hi
    I'm having problems starting up macbook - I get the chimes and if I leave the wheel and apple symbol for long enough I get the instruction to restart in different languages - plus the old style type to the left with something about Darwin Kernel. Don't think this is too regular but seems to happen judging by online  feedback.
    So i think it is something to do with the startup and have discs - have tried turning on holding down C with disc inserted - but if I go through to run disk utility, will i lose data...I'll admit to not backing up work, as most stuff online but few pictures and settings which will be annoying to an upsetting lesson to learn, if I lose them..
    Anyone have any thoughts please?

    Welcome to Apple Support Communities
    You shouldn't lose anything, but note that Disk Utility may modify the filesystem, and if this fails, you won't be able to recover your files. It's important to have a backup.
    Instead of trying to repair the drive, I recommend you to start up in safe mode by holding the Shift key while your Mac is starting up. There are different reasons for a kernel panic > http://support.apple.com/kb/ts3742

Maybe you are looking for

  • Cannot read CD or DVD built for region 4

    Compaq Presario C762NR Notebook PC that's my machine with Windows 7 - 32 I have few CDs - DVDs built for region 4 (South America) with soft wares that the hard drive cannot read at all. I had change the CD drive configuration to region 4, WINDOWS 7 s

  • Can't boot into desktop

    Hi, I own an iMac 20-in early 2008. I've installed Mavericks (10.9.5) on it and it's been running perfectly being used by our accounting person. One day the computer boot up and the usual chime & apple logo shows up. The loading circle shows up indic

  • Extend Idoc  INVOIC02 - E1EDKA1 - Syntax error

    Hi All, I have extended Basic idoc “INVOIC02” and using exit “EXIT_SAPLVEDF_002” to extend custom segment. I am trying to add a custom segment under “E1EDKA1”. In program I am inserting ‘Z1’ segment after parent segment “E1EDKA1”. I am passing Parent

  • USB help in XP Mode in Windows 7 boot camp

    I have been running Windows 7 in Boot Camp for quite some time. I need to run a program in windows XP and have installed XP mode in Windows 7.  The USB dongle I need to use for the program is not being recognized. From what I gather USB 3.0 is not su

  • Wired throughput on dual band Airport Extremes

    I wonder if anyone has put the dual band devices through their paces with the 5Ghz network and wide channels plus the 2.4 Ghz network at the same time. Since it has two radios, I'd expect it to be able to really route a lot of traffic, perhaps 300-35