Will I need any codec to import a FLV video file in PPro CS4?

Will it import the FLV natively? thanks..

In most cases, it should work fine, without the need for any additional codecs. I've successfully imported FLVs containing both Sorenson Spark and On2 VP6-encoded video, and MP4/F4Vs containing H.264-encoded video. I've had no issues doing basic editing on these sources and exporting them to a new destination, with the obvious caveat that you're (usually) dealing with highly-compressed video, and the quality will drop in varying degrees.

Similar Messages

HT201301 Can vmware player be used to create windows pc and mac. Will I need any other software or hardware to do that?

Can vmware player be used to create windows pc and mac. Will I need any other software or hardware to do that?(Have Windows and Mac on same computer)

Since you posted this in the iPod Touch forum and didn't provide enough information to contradict that I am going to say the it can't be done. VMWare does work in iPods.
Allan

Need to re-install Creative Suite 6 on a re-built MacBook Pro: I have the DesignStandard_CS6_LS16.dmg from initial download, do I simply double-click on the dmg to install? Will I need any keycodes?

Need to re-install Creative Suite 6 on a re-built MacBook Pro: I have the DesignStandard_CS6_LS16.dmg from initial download, do I simply double-click on the dmg to install? Will I need any keycodes?

Caseycork92 you double click the DMG to mount the disk image. You will also need to enter your serial number for Creative Suite 6 for Macintosh. You can find information on how to locate your serial number under your account at Find your serial number quickly - http://helpx.adobe.com/x-productkb/global/find-serial-number.html.

Upgrading to V4 has lost all of my Bookmarks, I still have the restore files in my profile data but they will not load, I have tried importing the html backup file too but it didn't work either. How can I get them back?

Upgrading to V4 has lost all of my Bookmarks, I still have the restore files in my profile data but they will not load, I have tried importing the html backup file too but it didn't work either. How can I get them back?

Ok this is bizzare!
Thank you for your response, I went throught each and every step without any luck, even got the recovery programme, and painstakingly tried to sift through all that mumbojumbo to find what i needed. finally found the bookmark bit, but it had been fully overwritten :(, so on reading about previous ff versions, found the sqlite thingys, and they were relatively unscathed(partly written over, but saveable apparently TG), saved them to adiff drive, amongst other possibly good folders. Then looked up how to install them, and it said to close FF, and install to profile folder.
So i tried to close FF, and the original problem from a few days ago, where it asked me if 'i was sure i wanted to close this window as it has X tabs open', popped up again. This is where 'open blank page' selection was set, over 'open previous tabs'. Wanting to save that info on how to sort out these friggin files, I reset the Option to 'open previous tabs', and closed FF. After unsucessfully searching for the profile folder on my laptop, i opened FF intending to search online for where i could find said folder.
AND BANG, surprise surprise, the FF I had just closed with only tabs open about finding out what the heck to do, had disappeared, and instead my original saved tabs were up, and my bookmarks are there..... I am gobsmacked! what the heck just happened there???
I have made 3 back up in different folders now, of those friggin bookmarks. I am weary now tho of shutting it all down.... what if its back to the other pages I had with no bookmarks, tomorrow :(

Have AE7; Problem importing prproj file into pc; get placeholder instead. What do I need to do to open up the video files here. They are .mov in quicktime.

Have AE7; Problem importing prproj file into pc; get placeholder instead. What do I need to do to open up the video files here. They are .mov in quicktime.

Please be more specific. What Premiere project? What version of Premiere? Which operating system? What CoDecs do the QT fiels use? Are all the video files in the correct folders inside the Premiere project structure? Your description sounds like you are attempting to open a Mac based project on a PC and your video files are either in the wrong location or use a Mac-specific CoDec, hence they cannot be read on a PC.
Mylenium

I need to change a photo into a video file in order to post on youtube. How can I do this with my mac?

I need to change a photo into a video file in order to post in youtube. How can I do this with my mac mini?

When I go to import, the choices are :
movies
camera archive
imovie for IOS
imovie for HD
It refuses to import a photo with any of these choices, which is located on the desktop or in a folder. It's a regular .jpg
There are instructions to drag it. I put it there, and it bounces right back. The photo will not stay.
I just need this one picture to go on so I can post a meditation on youtube. It doesn't come from a camera.

How to import two AVI video files & convert to one FLV ?

Status:
- Newbie using PC & Flash CS3 ver9l
- I can import a single AVI video file and convert it to an FLV video.
Problem:
- I have two AVI video files... one 4GB (20 minute) long and one 2GB (10 minute) long... and want to combine them to have a single 30 minute long FLV video file.
Question:
- Can I do this in Flash? When I "convert" a single AVI video to a FLV using the File, Import method... I can't really see the video on the Flash time line. I'm a newbie so I'm probably doing something wrong.
- I tried doing a File, Import for file-1.avi and then doing it for file-2.avi... but the two were on top of each other... and not end to end.
Maybe some kind sould will walk me through this.
Thanks for any help.

Your not going to be able to combine two videos as one in flash, if your using Win try Win Movie Maker, I believe you can drag both into a WMVM timeline and can then save as one file, then you can use AVC video converter or the like to encode them into an .flv or.f4v file.

Importing existing flash video files??

howdy
quick question. if you import existing flash video files into an encore project, will this help reduce the final render time? or will encore rerender the existing flash video files?
cheers
angus

Encore CS3 won't import FLV files. You must render the project to Flash.
You may want to file a feature request at Adobe's support page asking for support for Flash-ready assets, to eliminate the need to transcode in Encore.

HT3775 What do I need to download to read a .FLV video

Does anyone know what I need to download to my old MaCbook Pro to read a .flv video file? Thank you!

Zinnat.Keen wrote:
Does anyone know what I need to download to my old MaCbook Pro to read a .flv video file? Thank you!
Try MPEG Streamclip or VCL Player
http://www.squared5.com/svideo/mpeg-streamclip-mac.html
http://vlc-media-player.en.softonic.com
Cheers
Pete

Will I need any other virus protection such as McAfee for my computer if I'm using Firefox?

I'm purchasing a new home computer and would like to know if I will need any further virus protection, such as McAfee or Webroot? Is the protection from Firefox sufficient enough or should I get something else as well? Thank you.
Neil

Firefox is a browser, it is not a antivirus program, of course you must install a antivirus program of your choice.
An excellent add-on to support as a supplement your antivirus program which is provides extra protection to your Firefox is [https://addons.mozilla.org/en-us/firefox/addon/noscript/?src=hp-dl-mostpopular NoScript]. See it and your choice is yours.
thank you
Please mark "Solved" the answer that really solve the problem, to help others with a similar problem.

I am purchasing an iMac G3. I know that it is running on OS 8.6. I have found the old Mac OS X Jaguar (10.2), if I purchase the software, will I need any more requirements?

I will be purchasing an iMac G3 this week. I already know that it is currently running on OS 8.6. I found the old OS X Jaguar (10.2), I was wondering can I just install the discs, or do I need any more requirements?? Please help me.

The market value of those old iMacs is very low now, so I hope that you aren't paying any more than $30 for one. What model are you purchasing - the original with a tray-loading optical drive or the newer style with a slot-loading drive? If the latter, which model (processor speed) is it? You shouldn't buy one manufactured before built-in FireWire became standard, because you'll want a faster bus for external peripherals. The built-in USB ports are limited to USB 1.1 speed, which is quite slow for an external CD/DVD burner or hard drive. Before installing OS X, a tray-loading iMac should have firmware version 1.2 and a slot-loading iMac should have version 4.1.9. Additionally, the iMac should have adequate available storage capacity on the hard drive, as well as adequate installed memory. The OS 10.2.x (Jaguar) installer disk should be a retail (universal installer) disk, and not another Mac's Restore disk. One other point to mention concerns the hours of useage that the iMac has had. High-mileage iMacs often have problems with the P-A-V (Power/Analog/Video) board failing, which renders the computer useless. Replacement is a job for an experienced tech, because of the high-voltage shock hazard involved. Additionally, new P-A-V boards aren't available and used ones have questionable remaining service life. Just keep this in mind.

Any way to import Entourage XML **cache** files from its database to Mail?

I had a really bad meltdown and all I could retrieve from my address books (yes, I backed up, no it failed too) were Entourage XML cache files of my addresses and emails. They exist as "pointers" to originally stored info, not the info itself, so I cannot simply import them as tab delimited, or text, because of all the tags (or without a helluva lot of work editing) - however all the info is there. This looks to me like XML right? So is there someway to simply convert into another program - an in between convertor? editor? - that could get them to tabbed format. Here's what an address looks like to give a sense what I'm dealing with. Thanks for any suggestions.
<?xml version="1.0" encoding="UTF-8"?>
<!DOCTYPE plist PUBLIC "-//Apple Computer//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
<plist version="1.0">
<dict>
<key>commicrosoft_entouragefirstName</key>
<string>Bilbo Baggins</string>
<key>commicrosoft_entouragehomeStreet</key>
<string>Shire</string>
<key>commicrosoft_entouragejapanese</key>
<false/>
<key>kMDItemContentModificationDate</key>
<date>2007-12-04T05:21:26Z</date>
<key>kMDItemEmailAddresses</key>
<array>
<string>[email protected]</string>
</array>
<key>kMDItemTitle</key>
<string>Bilbo Baggins</string>
</dict>
</plist>

I've done a few test runs and the video quality seems pretty decent considering the quality of some of the original VHS recordings, but a "rough around the edges" look is noticeable when the source tape wasn't the best quality to begin with.
If converting the .asf file compromises quality further then I'll avoid that. The device seems at least like a great starting point for doing something with all of those old tapes. I figure I can at least experiment in the meantime and save up to get a more Mac friendly device that does the more direct conversion. At the very least I can get my old video projects from VHS onto DVD and work with them later on in iMovie.
I'm just a little irked that every now and then there's hardware or an application that is made PC only, almost like the manufacturer doesn't even realize that Macs even exist. The device wasn't made by Microsoft or one of the major PC makers, so I don't get not making it so that the video files are saved as mpeg4 instead of .asf
Now that I think about it, how common are SD cards outside of digital cameras (still and video cameras both seem to use them)? I have a camera that uses an SD card and if I didn't have the video converter, I wouldn't have known about using the cards for something other than pics or camera footage, and I wouldn't have known about needing a card reader because the camera plugs into a USB for downloading pics.

Any way to import multi-layered Illustator file into Motion?

I have an Illustrator map of Europe and i would like to bring it into Motion.
I know that Motion can import Illustrator files as pdf but is there any way to import a multi-layered illustrator file into Motion. I just saw this web site regarding a Motion plug-in that claims to do just this:
http://www.macupdate.com/info.php/id/16298/layerlink

Without a dedicated plug or FxPlug, Motion has no inherent ability to parse Illustrator layers.
We just bust the layers out and save them as individual files. Or, of course, we use After Effects.
bogiesan

Need expert advice to import and convert video using Windows COM SDK

Hi,
Does anybody know can I import a video file and convert the footage to iPod compatible format using vbscript?
I found a COM function 'convertfile', but it seems only work with audio and doesn't work with mpg files. Does the current version of COM SDK 6.0.2.23 support conversion of mpg?
Set iTunesApp = WScript.CreateObject("iTunes.Application")
Status = iTunesApp.ConvertFile("m:\test.mpg")
Thanks in advance.
Intel Windows XP Pro

Thanks, but I know iTunes 6 (windows version) has a built-in function to convert a video to a format for iPod G5. That's why I wonder if the iTunes Windows COM SDK has the function call so that I can automatically import my scheduled recording to iPod. I think that's the advantage of iTunes / iPod. Actually I love my iPod G3 and iPod mini, but I don't see a reason for me to upgrade to G5 if it only accept H264 and mp4 because all my recordings (directly from my TV card) are only mpeg format and there is currently no command line tools to convert them for iPod. I know a bit of programming and it is much more conveninent to use scripts to do the mpg -> ipod conversion automatically than doing it manually using GUI programs..
Thanks

Can't Import Mov file into Ppro CS4

I have imported all sorts of mov files but one is from a SONY V1 and won't import. I get an error message saying there is a codec missing. In VLC player it takes along time to play and it says the codec is MPEG-1/2 video (mpgv), 1440x1080, 29.97. In QT player the video is black but the audio is fine. How can I import this into Ppro?

Do you have QT Player Pro (US$30 upgrade/unlock)? If so, load the file, and hit Ctrl+J for the properties panel. QT Player has a limited properties screen, but I do not recall the keystroke. Also, QT Player Pro, if it will play the file, can also Export to other formats/CODEC's, and I use it for that purpose often.
Also, the free MediaInfo might do better, than G-Spot.
Without knowing the exact CODEC, looking for it might prove difficult.
Also, VLC comes with a bunch of internal players and CODEC's, so it can play stuff, that will not work in other apps., which require the installed CODEC's. There are several Apple-only CODEC's, that do not have any PC counterpart. In that case, you'd need to Open that file on a Mac, with the proper CODEC, and then Export (basically converting) it to another format/CODEC.
Good luck,
Hunt
PS - here is an ARTICLE, that might offer a bit more background on CODEC's.

Will I need any codec to import a FLV video file in PPro CS4?

Similar Messages

Maybe you are looking for