Will I need to flash the vbios of my not yet bought GX740

Hi! I'm planning to buy a new GX740. Howver, the vbios flashing issue is turning me off. It seems stressful and risky. Does someone know if the new GX740s sold in Sweden these days already have the new vbios installed?

As the laptops are probably the same in the Finnish market as in Sweden, I'd assume that it is already in the latest version. I bought one earlier this week, and BIOS, EC and VBIOS were all in their latest version.

Similar Messages

  • Powermac G5 & GeForce 6200 Do I Really Need To Flash The Card?

    Here I go Again! I got a nice deal on a Powermac G5 1.8 & I would like to Upgrade the AGP Graphics Card. I have a Card that the sites say will work, but since it came out of my PC, they talk about needing to Flash The Card first. The procedure is a long winded one & I'm wondering if this is really needed. I don't want to just put the card in the G5 & have something fail. BTW. the Graphics Card is a Geforce 6200 DDR2 256MB AGP. The other thing that concerns me is the G5 takes DDR PC3200 Ram & this Graphics Card is DDR2. Will that make a difference? So does anyone have experience on this sort of thing? I would appreciate the Help. Thanks in advance.

    The  256 MB of VRAM might run bigger or more Displays, but won't be any faster than a 64 MB card for that reason alone.
    Which Video card is in it now?
    At the Apple Icon at top left>About this Mac.
    Then click on More Info>Hardware>Graphics/Displays and report like this...
    NVIDIA GeForce 7800GT:
      Chipset Model:          GeForce 7800GT
      Type:          Display
      Bus:          PCI
      Slot:          SLOT-1
      VRAM (Total):          256 MB
      Vendor:          nVIDIA (0x10de)
      Device ID:          0x0092
      Revision ID:          0x00a1
      ROM Revision:          2152.2
      Displays:
    VGA Display:
      Resolution:          1920 x 1080 @ 60 Hz
      Depth:          32-bit Color
      Core Image:          Supported
      Main Display:          Yes
      Mirror:          Off
      Online:          Yes
      Quartz Extreme:          Supported
    Display:
      Status:          No display connected

  • Will the new iPhone 4s be compatible with iMac version OSX 10.6.8, or will I need to upgrade the iMac operating system?

    Will the new iPhone 4s be compatible with my 5 or 6 year old iMac that I upgraded to Snow Leopard (10.6.8)? Or will I need to upgrade the operating system on the iMac?

    go to apple.com/iphone and look up tech specs.
    You'll find this:
    Mac System Requirements
    Mac computer with USB 2.0 port
    OS X v10.5.8 or later
    iTunes 10.5 or later (free download from www.itunes.com/download)
    Apple ID (required for some features)
    Internet access

  • If I restore my phone from an old backup, will I need to know the old passcode?

    If I restore my phone from an old backup, will I need to know the old passcode?

    Yes you can delete this backup, & no, it won't delete anything off your phone.

  • I have an iPod Nano with just the USB charger. Is it safe to plug this into a Kindle power adaptor to charge from the mains or will I need to buy the Apple one?

    I have an iPod Nano with just the USB charger. Is it safe to plug this into my Kindle power adaptor to charge from the mains or will I need to buy the Apple one?

    Hi,
    Try resetting your iPod:  http://support.apple.com/kb/HT1430. 
    If that doesn't work, try restoring it:  http://support.apple.com/kb/ht1414. 
    If all else fails, you will have to place your iPod in Recovery Mode:  http://support.apple.com/kb/HT1808. 
    Hope this helps! 
    ---likeabird---

  • Cannot open PS, window says "Preferences have been deleted". I have NOT deleted anything. How do I fix the problem? Will I need to reinstall the program?

    cannot open PS, window says "Preferences have been deleted". I have NOT deleted anything. How do I fix the problem? Will I need to reinstall the program?

    Hi,
       This should only occur if this is a NEW computer or your first sync and you have information from another computer.
    Has this iPhone been synced with another computer before?
    Transferring Purchases; http://support.apple.com/kb/ht1848
    If you follow that link your Apps WILL be on your computer and any music you have brought......
    Now, do not worry, even if you do accidentally delete your apps, you can download them again for free with your itunes store account, just keep in mind you will lose any saved data!
    Follow this and hit continue, the only information that could get lost is any content (music, videos etc) synced from ANOTHER computer that WAS NOT brought from your account.
    Hope this helps and makes sense....

  • Hi, I just got my Iphone 5s when I open my camera when my phone is lock te icons of the flash and the reversing camera is there, but when I try to open my camera from the apps camera the icons of the flash, the reversing camera is not there anymore?

    Hi, I just got my Iphone 5s when I open my camera when my phone is lock te icons of the flash and the reversing camera is there, but when I try to open my camera from the apps camera the icons of the flash, the reversing camera is not there anymore?

    Have you tried restarting or resetting your iPhone?
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPhone shuts down, then press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds).

  • HT5622 i need help using the icloud it is not making any since to me can some one call me and help me with it please don't try to help me through email i need to talk and listen i don't understand instruction by reading

    i need help using the icloud it is not making any since to me can some one call me and help me with it please don't try to help me through email i need to talk and listen i don't understand instruction by reading.
    <Phone Number Edited by Host>

    You aren't addressing anyone from Apple here.  This is a user forum.
    You might want to call a neaby Apple store to see if they have a free class you could attend.

  • How do I go back to Firefox 5.0? I need to use Selenium IDE, which is not yet compatible with 6.0.

    How do I go back to Firefox 5.0? I need to use Selenium IDE, which is not yet compatible with 6.0.

    The link is to the latest update to 4.o which was 4.0.1
    The 4.0.1 and 5.0 are two separate versions as installing 4.0.1 over 5.0 will just give you the old 4.0.1 as the end result.
    The 5.0 is partially as a security update in place of 4.0.2.
    The Skype extension was only for to make it so you can dial phone numbers on a web page in the separate Skype program right so if you were not using it then no need for the Skype extension for the separate Skype application to work.

  • Some or all of the samples requested have not yet been acquired?

    Hi,
    I'm running the labview codes (8.5) on Mac platform. The Daq part number is USB-6211. Here are more details:
    Mode: differential, continuous sample
    Samples per channel: 250,000
    Sample rate: 250 kHz
    Channel: A1, A9
    The data acquisition goes well in the first hour and suddenly it shows error-200284, Some or all of the samples requested have not yet been acquired. The timeout is much higher than samples / sample rate, which is 100 s. Is anyone can help me with this? I attached the labview codes. 
    Attachments:
    Screen Shot 2012-10-31 at 6.20.22 PM.png ‏265 KB

    1. As said, you should not be using the Run Continuously button.  Use a while loop to acquire your data.  Setup the task before the loop and close it out after the loop.
    2. When you have the while loop, put a wait in there (1 second might be good).  This will help avoid the timeout issue.
    3. Propagate your errors.  Have the while loop stop on the error or your stop button.  Use the Simple Error Handler at the end.
    There are only two ways to tell somebody thanks: Kudos and Marked Solutions
    Unofficial Forum Rules and Guidelines

  • The accounting document has not yet been created Message no. VF062

    hiii
    Iam getting error in VF02.
    Error is The accounting document has not yet been created
    Message no. VF062
    And where i can do it ?

    hi
    Go to VF02
    Open the billing document
    Enviornment -- Acc. determination analysis -- Revenue accounts and see why the accounting document is not generated
    Also, from VFX3 and select the document and release the same by clicking on FLAG and then to know the cause of
    Error
    TO know cause GOTO Tab --- NOTE and u will get the error cause
    let us know the cause then only we can be able to tell exact solution if possible.

  • Error: . fields not displayed because the HTML form was not yet opened.

    I had created a data base application using Import from one workspace(schema1) to another workspace(schema2).
    Created all the tables and data in schema2.
    Now when I'm trying to run the page getting the following error
    " Error: Item "P16_PRODUCT" was not displayed because the HTML form was not yet opened. "
    I'm not able to figure out what is that I'm missing during import due to which form is not opening.
    Removed the authorization from the pages in order to test the page. So, I don't think this is related to Authorization.
    Please help me in identifying the issue.
    Thanks,
    Suresh.

    Hello Suresh,
    >> I had created a data base application using Import from one workspace(schema1) to another workspace(schema2).
    Is the APEX version on both workspaces are the same? What is the APEX version?
    Please make sure that the page template you are using includes #FORM_OPEN# in the last line of the Header section.
    Regards,
    Arie.
    &diams; Please remember to mark appropriate posts as correct/helpful. For the long run, it will benefit us all.
    &diams; Author of Oracle Application Express 3.2 – The Essentials and More

  • Firefox is trying to update my 8.0 version to 9.0.1. I'm not ready to do so because the Norton Toolbar is not yet compatable with the new Firefox release. How do I get firefox to stop trying to update every time I open the application?

    Question
    Firefox is trying to update my 8.0 version to 9.0.1. I'm not ready to do so because the Norton Toolbar is not yet compatable with the new Firefox release. How do I get firefox to stop trying to update every time I open the application?

    Swarnava wrote: '''''Firefox 9 is Compatible with Norton 2011, 2012, 360 v5'''''.
    This reads backwards, It is the other way as "Norton update is compatible with Firefox 9".

  • Error in GP: The next activity is not yet available: try again later...

    I am receiving the following error in Guided Procedures:  The next activity is not yet available: try again later using the "Refresh" button.
    Here is my scenario:
    I have a Guided Procedure where all of the activities are executed by the process initiator.
    In the first step of the Guided Procedure, I run an Action called 'Read Document'.
    The Action is set up as follows:
      Callable Object for Execution:  Read Document
      Callable Object for Display:  Read Document
    Since this action doesn't do anything except display a document, I have defined the same callable object for both execution and display.  
    After the user clicks the Complete button, the Guided Procedure moves to the next step as expected.  However, if the user returns to the activity that they just completed (because maybe they want to read the document again), I receive the following error message: The next activity is not yet available: try again later using the "Refresh" button.
    What is causing this message and how can I get rid of it?
    Thanks.

    please help me!!!!!!!!!!!

  • Error "The sales document is not yet complete" when using SD_SALES_DOCU_MAINTAIN

    Hi there,
    I have built an update program for updating the sales documents (VA42). In that program I am using the BAPI-SD_SALES_DOCU_MAINTAIN. It works fine except for the sales docs that are incomplete. For those sales docs I have the following messages in the Return-internal tab. from the BAPI:
    V4
    233
    VBAKKOM has been processed successfully
    V4
    233
    VBAPKOM has been processed successfully
    V4
    233
    VBAPKOM has been processed successfully
    V4
    233
    VBAPKOM has been processed successfully
    V1
    555
    The sales document is not yet complete: Edit data
    V1
    311
    Collection Contract 55259592 has been saved
    The sales doc is indeed incomplete. What is missing in this sales doc is the prices. After discussion with the people from the business, I found out that it is impossible to complete those sales docs.
    In the transaction-VA42 it is possible to save such sales docs, after clicking the "Save" button in the pop-up "The sales doc is incomplete. (Save - Edit - Cancel)".
    The standard reports SDVBUV00 and SDVBUK00 do not help.
    Is there any other possibility or other BAPI that I could use to save such sales docs?
    Thanks,
    Dimce

    no issue anymore. On the QA-system it didn't work and on the production one it works.

Maybe you are looking for