Will i5 with FCS not be far less then i7 with FCS? performance-wised.

27-inch models only, one of the following:
2.66GHz quad-core Intel Core i5 processor with 8MB shared L3 cache; Turbo Boost dynamic performance up to 3.2GHz
2.8GHz quad-core Intel Core i7 processor with 8MB shared L3 cache; Turbo Boost dynamic performance up to 3.46GHz; Hyper-Threading for up to eight virtual cores
May I get the "up to 2.3x faster performance with Final Cut Studio" with i5?
Thanks advanced

For that configuration running those tests and no other software, yes the i7 looks to outperform the i5. And both clearly outperform the Core2Duo.
I would point out however that if your concern is FCStudio performance on an i5 vs an i7 then only the Compressor and AfterEffects scores would be indicative of performance differences for your uses. And the differences in scores there is not that great.
The Cinebench score is the one where the i7 clearly outperforms the i5 but understand that Cinebench is a test of 3D performance, which would be very relevant for gaming uses but not so relevant for video or photo uses/comparisons.
So, my opinion is that for FCStudio purposes there is some performance increase with an i7 vs an i5 but it's not all that significant a difference. (13-15% difference; not 2.3x difference). Is it worth the extra $$ to go with the i7 rather than an i5? Only you can answer that question.

Similar Messages

Distributed File System Replication between servers with different performance

If Distributed File System Replication is set between servers with different performance. What will happen with the performance of the fastest server? Will the performance decrease to match the performance of the
slowest server in the chain? I mean, will the source slow down (processor speed) if the recipients can't keep up?

Hi,
If you mix different performance server for DFS replication, most of improvements on the fastest server are disabled for backwards compatibility and the performance decrease to match the performance of the slowest server.
For more detailed information, please refer to the article below:
Tuning replication performance in DFSR (especially on Win2008 R2)
http://blogs.technet.com/b/askds/archive/2010/03/31/tuning-replication-performance-in-dfsr-especially-on-win2008-r2.aspx
Best Regards,
Mandy
If you have any feedback on our support, please click
here .
We
are trying to better understand customer views on social support experience, so your participation in this
interview project would be greatly appreciated if you have time.
Thanks for helping make community forums a great place.

Will not share Imovie with Idvd. Gets so far and then a box saying Unable to prepare project for publishing because an error occured (-41)

Cannot SHARE project from IMovie to Idvd. Gets so far and then a box with a message saying Unable to prepare project for publishing because an error occured (-41).

Bengt is as always entirely correct, but another meaning of error -41 is that you have chosen the wrong encoding setting for the length of video you have:
iDVD encoding settings:
http://support.apple.com/kb/HT1502?viewlocale=en_US
Short version:
Best Performance is for videos of up to 60 minutes
Best Quality is for videos of up to 120 minutes
Professional Quality is also for up to 120 minutes but even higher quality (and takes much longer)
That was for single-layer DVDs. Double these numbers for dual-layer DVDs.
Professional Quality: The Professional Quality option uses advanced two-pass technology to encode your video (The first pass determines which parts of the movie can be given greater compresson without quality loss and which parts can’t. The second pass then encodes those different parts accordingly) , resulting in the best quality of video possible on your burned DVD. You can select this option regardless of your project’s duration (up to 2 hours of video for a single-layer disc and 4 hours for a double-layer disc). Because Professional Quality encoding is time-consuming (requiring about twice as much time to encode a project as the High Quality option, for example) choose it only if you are not concerned about the time taken.
In both cases the maximum length includes titles, transitions and effects etc. Allow about 15 minutes for these.
You can use the amount of video in your project as a rough determination of which method to choose. If your project has an hour or less of video (for a single-layer disc), choose Best Performance. If it has between 1 and 2 hours of video (for a single-layer disc), choose High Quality. If you want the best possible encoding quality for projects that are up to 2 hours (for a single-layer disc), choose Professional Quality. This option takes about twice as long as the High Quality option, so select it only if time is not an issue for you.
Use the Capacity meter in the Project Info window (choose Project > Project Info) to determine how many minutes of video your project contains.
NOTE: With the Best Performance setting, you can turn background encoding off by choosing Advanced > “Encode in Background.” The checkmark is removed to show it’s no longer selected. Turning off background encoding can help performance if your system seems sluggish.
And whilst checking these settings in iDVD Preferences, make sure that the settings for NTSC/PAL and DV/DV Widescreen are also what you want.
http://support.apple.com/kb/HT1502?viewlocale=en_US

The site in the Spanish App Store I reserved the iPhone 5 and would like to get it to turn. But I was told that if I'm lucky - I will come with an email confirmation. Excuse me, I'd like to reserve an honest in turn, not to play the lottery for luck.

The site in the Spanish App Store I reserved the iPhone 5 and would like to get it to turn. But I was told that if I'm lucky - I will come with an email confirmation. Excuse me, I'd like to reserve an honest in turn, not to play the lottery for luck. I am disappointed by the work Apple

It sounds as if AT&T has already told you they can't do what you want. It doensn't sould like anything that's fixable on your end.

I need to install an App that will work with my iOS. How do I get an earlier App that is not now in the App Store?

I have an iPod Touch that can only run iOS 3.1.3. I have had Zinio & PressReader (both free Apps) installed on it for many years, and subscribe to a number of Magazines and Newspapers. I had backed up the iPod in September 2012. Today, I had to restore the iOS from the backup, but saw that Zinio and PressReader had not been installed. I am aware that the iTunes store explains that the latest versions are for iOS 4.3, but I need the latest version that will work with my iPod on iOS 3.1.3.
Does anyone know how I can get hold of the earlier versions of the "ipa" files, short of asking the publishers themselves?
And, should I expect the Publishers to release the appropriate ipa to me?

You aren't being left in any lurch. Your hardware is obsolete, and the software world has moved on. If you have a qualm about the matter then discuss it with the software's developers. Apple is not responsible for software they do not develop. This is technology, and you will just need to get used to it.

I have created my site with Muse and have uploaded to an external ftp hosting, now my secure log in will not work because I am not using BC. Is there a way to create a secure log in that will work with out being forced to use BC?

I have created my site with Muse and have uploaded to an external ftp hosting, now my secure log in will not work because I am not using BC. Is there a way to create a secure log in that will work with out being forced to use BC?

Hi
Secure Zone login feature will only work if you host your website with Business catalyst.
Please take a look to this as an alternative
Password Protect Pages Widget for Adobe Muse
Also, check this thread,
Re: Can I create a login/password protection in Muse for a HTML5 page or two?

Does anyone have a suggestion for an alternative to iCal that will interface with the Cloud? I find iCal to be poorly designed and not very efficient.

Does anyone have a suggestion for an alternative to iCal that will interface with the Cloud so it works on the iPhone and the Macbook? I find iCal to be poorly designed and not very efficient. I waste a lot of time entering information because you can't go to a specific day and enter information, nor can you navigate between months and add information on a specific date by clicking on the date. You can't easily scroll month-to-month and once you do by scrolling through nine months to get to where you want to be, you cannot enter information by clicking on a specific day in the month and entering information. I just called Apple and they verified that this is the way it works. You cannot go to a date and enter information, you keep getting thrown back to today and then you have to go into the calendar and change it manually on the screen. It is just not efficient.

APC, CyberPower are reliable.
Look for 1500VA. As example:
APC
http://www.amazon.co.uk/APC-Back-UPS-Pro-1500-Connector/dp/B0041MP81Y/
Cyperpower:
http://www.amazon.co.uk/Dell-CyberPower-Intelligent-LCD-1500VA/dp/B005DL5L50/

HT1212 My ipod touch is not turning on, even if i plug it in to the charger. I'am wanting to rest the passcode through my computer in hopes it will turn back on. So far nothing is working what should I do?

My ipod touch is not turning on, even if i plug it in to the charger. I'am wanting to rest the passcode through my computer in hopes it will turn back on. So far nothing is working what should I do?

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

2nd Gen Ipod will sync with itunes but will not download new song

My Ipod will sync with itunes but will not download newly purchased songs. It is Ipod nano 2nd gen.

If you want to use automatic syncing, you may need to set up or update the iPod's Music sync settings in iTunes. If the new songs are not included in what gets synced to the iPod, they will not sync.
If the sidebar (along left side of window) is hidden, from the menu bar, under View, select Show Sidebar. The iPod appears in the sidebar, under DEVICES. Select it there, to show its Summary screen to the right. Toward the top, there is a bar of buttons, starting with Summary. Click on Music next to Summary. This Music screen is where you tell iTunes how to sync songs to the iPod.
Check the box for Sync Music, if not already checked. This is the "switch" to enable automatic syncing for songs.
NOTE: If Sync Music is not already checked, that means the iPod is currently set to Manually manage music. Setting up automatic syncing will replace the iPod existing content. If you want to add the new songs manually to the iPod (instead of using automatic syncing), please post back.
If your iTunes library fits on the iPod, you can choose the option to sync Entire music library. Otherwise, choose the option to sync Selected playlists, artists, albums, and genres. Below that, select (checkmark) what you want to sync to the iPod from the lists.
One convenient way to set this up is to first create one or more playlists in your iTunes library, with ALL of the songs you want on the iPod. Or you can use existing playlists. Back on the iPod's Music screen in iTunes, select those playlists under Playlists.
When you click Apply, iTunes syncs the songs in your selection(s) to the iPod (replacing its existing content). Going forward, to update the iPod, you can just update those playlists in your iTunes library (add/remove songs). If you have new songs, add them to a playlist that is synced to the iPod. The iPod does not need to be connected. The next time you connect the iPod (or click Sync if already connected), iTunes automatically updates your iPod with the same changes.

Mac Book Pro on boot up, the apple sign will appear with the spinning wheel. After some time, a grey screen wil appear with a movable mouse, but will not boot up. Help!

Mac Book Pro on boot up, the apple sign will appear with the spinning wheel. After a period of time the screen will turn grey, but the mouse will still operate, but not boot up.

If it was purchased brand new then it's running a version of Lion, so to reinstall Lion:
Reinstalling Lion Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall Lion: Select Reinstall Lion and click on the Continue button.

My iphone 5 is not syncing with my laptop and windows 8. cant find an itunes app for my laptop. is there something i can get that will help with this

My iphone 5 is not syncing with my laptop and windows 8. cant find an itunes app for my laptop. is there something i can get that will help with this?

Lbo51380 wrote:
cant find an itunes app for my laptop. is there something i can get that will help with this?
Go here -> http://www.apple.com/itunes/download/

When I click on pictures in eBay or Facebook. It will not show the pictures....Will work with IE but not FF

When I click on pictures on eBay and Facebook...it will not show pictures/enlargements...just blanks....will work with IE. NOT ff

You can use these steps to check if images are blocked:
*Open the web page that has the images missing in a browser tab.
*Click the website favicon ([[Site Identity Button]]) on the left end of the location bar.
*Click the "More Information" button to open the "Page Info" window with the Security tab selected (also accessible via "Tools > Page Info").
*Go to the <i>Media</i> tab of the "Tools > Page Info" window.
*Select the first image link and scroll down through the list with the Down arrow key.
*If an image in the list is grayed and there is a check-mark in the box "<i>Block Images from...</i>" then remove that mark to unblock the images from that domain.
See also:
*http://kb.mozillazine.org/Images_or_animations_do_not_load
There are also extensions (Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images.
*https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

PL/SQL will compile with warnings but will not run

I have a pl/sql package that will compile with warnings but no errors but when i try to run it I get an ORA-6508 error telling me there is an error somewhere in the package but I can't find it.
I have two user schemas that use 2 slightly different versions of the package. I had to make slight code changes to one of the versions and when I made those changes it stopped running. The second version compiles and runs correctly.
After going through a line by line comparison the first copy was still not running. I copied the second version of the code into the broken schema and commented out the additional lines of code that are not needed in this version.
When I tried to compile and run this version it still fails with the same error.
I am using Oracle XE and the databases are small.
I can send on the code if necessary.
Can anyone point me in the right direction?
Thanks
Susan

I tried doing what you suggested but there are no errors as it is compiling correctly.
It is only when I run the package through the debugger that I get the error. I have posted it below
Connecting to the database Hess S3.
Executing PL/SQL: ALTER SESSION SET PLSQL_DEBUG=TRUE
Executing PL/SQL: CALL DBMS_DEBUG_JDWP.CONNECT_TCP( '127.0.0.1', '2086' )
Debugger accepted connection from database on port 2086.
Processing 59 classes that have already been prepared...
Finished processing prepared classes.
Exception breakpoint occurred at line 10 of BnmSkOTQ3jz5I52ZOxC4QNw.pls.
$Oracle.EXCEPTION_ORA_6508:
ORA-04063: package body "SHIPPING.LIFTINGSCHEDULE" has errors
ORA-06508: PL/SQL: could not find program unit being called: "SHIPPING.LIFTINGSCHEDULE"
ORA-06512: at line 10
Process exited.
Disconnecting from the database Hess S3.
Debugger disconnected from database.
Regards
susan

My iPhone will connect with my Goodmans bluetooth speaker but my macbook pro will not, even though it will pair with it and 'sees'it

My iPhone will connect with my Goodmans bluetooth speaker but my macbook pro will not, even though it will pair with it and 'sees' it

Hi there tomcrud,
You may find the information in the article below helpful.
OS X Mavericks: Set up Bluetooth audio devices
http://support.apple.com/kb/PH14217
Also, make sure your iPhone is not paired to the speaker while trying to piar it to your Mac.
-Griff W.

Why will my I phone not connect with my IMac it pairs?

Why will my I Phone not connect with my IMAC it pairs?

Since you use the work "pairs", I must assume you're talking about bluetooth.
Unless you're trying to use the personal hotspot to tether the computer to the phone, you can't do that...
You can only use bluetooth with a computer for tethering. Bluetooth file sharing is not supported. Neither is bluetooth sync.

Will i5 with FCS not be far less then i7 with FCS? performance-wised.

Similar Messages

Maybe you are looking for