Will iCloud mail and calendar sync still work after upgrade to iCloud drive?

on my imac and ipad i was asked to upgrade iCloud to iCloud drive. will my iCloud mail and calendar still work on my iphone 4 with iOS 7 after i choose to upgrade?

Yes. iCloud Drive doesn't effect synced data such as calendars, contacts, notes, etc. It also has nothing to do with iCloud email accounts.

Similar Messages

IPhone calendar sync not working after upgrade to 9.2(61)

I updated my iTunes software and now the calendar on my iPhone won't sync properly.
When I change an event on the iPhone and then sync, it doesn't update in the calendar on my computer and it changes the event back to where it was before I changed it.
Any suggestions would be greatly appreciated!!
Margie

Had same problem....Apple tech guided me through this procedure that worked fine...
1) Sync your phone so that everything on your computer is as it should be.
2) RESTORE phone to factory settings. This is a choice in iTunes under the Summary tab when you have your iPhone device selected.
3) During this procedure you will be asked if you want to SET AS NEW PHONE. It is important to select YES to this option. This procedure takes some time...15-30 minutes
4) Set up your options for syncing from iTunes under the Info tab. If you change any settings here and ALLOW it, syncing will automatically happen. Make sure your calendar is being synced.
5) Check out the results...should be good.....I needed to sync a number of times to get everything back to normal.
6) Since doing this, the calendar syncs as it should and did before the upgrade, alone with everything else I want to sync.
Good Luck

Currently running OS 10.6.8. If I update to Mountain Lion will Photoshop CS6 and Lightroom 4 still work?

Currently running OS 10.6.8. If I update to Mountain Lion will Photoshop CS6 and Lightroom 4 still work?

Can't say anything about Lightroom, but Adobe officially supports CS6 all the way through Mountain Lion.

11.1.1.6.4 Repository variables for DSN and USER do not work after upgrade

Hi,
The Repository Variables OLAP_DSN and OLAP_USER no longer work after upgrading to 11.1.1.6.4 i.e they return a connection error when trying to import metadata but the connection is correct if explicitly set without the variable used.
I have tried the following resolution:
- From command line execute commands to set variable properties via admintool.exe /command vartext.txt
Open rpdname user password
SetProperty "Variable" "OLAP_DSN" Initializer "'ORCL.GLOBAL'"
Save
Close
Exit
This script works fine as demonstrated by commenting out Save, Close, Exit and running. But it does not resolve the problem.
The issue is consistent as in the OLAP_USER variable does not work if DNS for connection pool set to ORCL.GLOBAL.
Is this a bug?
Thanks in advance
Edited by: 983325 on 26-Feb-2013 02:35

There is a 3.1.0.5 client. First thing I would try is the newest client.
Sent from Cisco Technical Support iPad App

BB Z10 - contacts stopped syncing with Office 365 - e-mails and calendar are still syncing fine

I have had my BB Z10 for over a month and e-mails, calendar and contacts were syncing great from my Office 365 account. E-mail and calendar still sync but I have lost all connectivity to the contacts. Nothing shows up from Office 365 (my other contacts show up ok from LinkedIn etc.).
Help as this is a critical function on my phone. I can't call or e-mail anyone if I don't have their contact information.
Solved!
Go to Solution.

Hi and Welcome to the Community!
With a strong carrier network signal (e.g., not merely WiFi), I suggest the following steps, in order, even if they seem redundant to what you have already tried (steps 1 and 2 each should result in a message coming to your BB...please wait for that before proceeding to the next step):
1) Register HRT
KB00510 How to register a BlackBerry smartphone with the wireless network
Please wait for one "registration" message to arrive to your Messages app
2) Delete and Resend Service Books (pre-BB10 devices only)
KB05000Delete the service book for the BlackBerry Internet Service email account from the BlackBerry smartphone
If you have no CMIME entry, then skip the deletion
KB02830 Send the service books for the BlackBerry Internet Service
Please wait for "Activation" Messages, one per already configured email account, to arrive in your Messages. If you have no already configured email accounts, please wait 1 hour.
3) Reboot
Pre-BB10 Devices ONLY. With power ON, remove the back cover and pull out the battery. Wait about a minute then replace the battery and cover. Power up and wait patiently through the long reboot -- ~5 minutes.
BB10 Devices. Hold the top button down until the counter reaches zero. Wait for the device to be fully shut down (e.g., nothing at all displayed on the screen, no LED lights, etc.). Hold the top button until the red LED is lit. Wait through the full boot-up process. IF this fails, you can attempt the battery-pull method above, but it is normally NOT recommended unless nothing else works.
See if things have returned to good operation. Like all computing devices, BB's suffer from memory leaks and such...with a hard reboot being the best cure.
Hopefully that will get things going again for you! If not, then you should try deleting and re-adding your configurations for the affected accounts. Otherwise, you should contact your mobile service provider for formal support.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Notifications for Mail and Calendar don't work properly

I only receive the Notifications from Mail and Calendar,
when those applications are open and running.
(yes, I have Preferences set to Alerts (not banners),
all the following boxes are all checkmarked:
Show in Notification 5 Recent Items
Badge app icon
Play sound when receiving notifications).
I receive Notifications regarding other apps,
such as Reminders, just fine, even when Reminders is closed.
I usually have Mail and Calendar closed (not running)
therefore I miss virtually all Notifications from those programs.
If I have to have the programs (Mail and Calendar) open all the time,
what's the point of Notifications?
When Mail and Calendar are open and running,
they alert the user with their own alerts
(without need for Notifications).

appleuser8000 wrote:
I only receive the Notifications from Mail and Calendar,
when those applications are open and running.
Mail
That is the expected behavior.
Best.

Will all my apps still work after upgrade?

I am always nervous doing any updates because inevitably some apps start working funny or don't work at all after them. I really want to update to Lion, but I'm concerned about some older apps I have, the number one being Final Cut Pro 7. Will this still work after the Lion upgrade? As well as all my other software?
Thank you!

EU4 wrote:
How do you mean install onto a test drive? I've never done that before.
Connect an bare external drive and install Lion onto that. Test all of your critical software to ensure it works. If you have some vitally important piece of 3rd party software that doesn't work in Lion, you may have to continue to use Snow Leopard until an update to that 3rd party software is available or you find a replacement.

Windows 10 - No sound and mediaplayer does not work after upgrade

Hi !I can't get the sound to work after upgrade to win 10, - and windows mediaplayer will not openmp3's -- I get video on the VLC - but no sound... If anybody can help me, - please post a direct link to the driver I have toreinstall.. Thanks CarstenNorway

Thanks for the answer- but I mangage to solve the problem my self this time... I just did go to controlpanel - and clicked right button on the mouse - and updated both sound drivers thatI did find in there. After restart of the lap - everything worked ut well.. I am supprized !! Carsten

Mail and iCal doesn't work after restart

Hello, after rebooting my Macbook Air I can't use Mail and iCal, which is starting automatically in the background. Please help me. Thanks

Try these things:
First, restart the computer, test. If the problem persists:
Test in a new user; if the problem persists, reinstall your OS (boot up the computer holding "option". Click Recovery HD, then click "reinstall Mac OS X". This will not delete your data, but I'd recommend a backup beforehand anyway, just in case). You can also click "Disk Utility" in the Recovery HD, and attempt to repair your boot disk (Macintosh HD), and restart and test before reinstalling.
If the problem does not happen in a new user, try pulling the preference lists for the two programs. You can find these by clicking Finder, going to the Go menu, hold option and click Library. Click Preferences, then scroll down to "com.apple.mail.plist" and "com.apple.ical.plist". There should be a few of each, pull these to the trash. Restart and test. If the problem still happens:
Safe boot the computer by starting up holding Shift. Test. If the problem still happens, there is some interference from a third-party program, and you might need to disable or uninstall it. You can disable third-party items on startup by going to Apple menu>System Preferences>Users and Groups, then clicking "login items", and removing (not un-checking) the third-party programs from the list. I'd remove anything that isn't absolutely necessary to start up when the computer launches. Note: This does not delete or uninstall a program, but only prevents it from opening when the computer first boots up.
Restart and test.
If the problem still happens, reply and list the steps you have done.
Good luck!

Mail and safari won't work after installing lion.

After upgrading my computer to Snow Leopard then to Lion I am unable to open Safari and Mail. The computer says the versions I have are not compatible with Lion. I have checked to see if there are any available updates by selecting the apple at the top left - the computer states it is up-to-date.
Does anyone know a solution to this problem?
Thank you!

Please check to see if both the Mail app and Safari app were located at the root level of the Applications folder, and not renamed in any way. Unless that is the case, the Upgrade to Lion may not work correctly.
However, also look with Spotlight to see if there are more than one version of each on your Mac, as your links in the Dock might refer to now outdated ones.
Ernie

IPhone sync not working after upgrade to 2.02

Hi All,
I upgraded the firmware to 2.02 this morning, and now iTunes will not recognize my iphone when trying to sync. The phone appears in the itunes interface, but everytime I try to sync I get an error message that iTunes cannot find/sync my iPhone?
Anyone experienceing this? Any help?

Had same problem....Apple tech guided me through this procedure that worked fine...
1) Sync your phone so that everything on your computer is as it should be.
2) RESTORE phone to factory settings. This is a choice in iTunes under the Summary tab when you have your iPhone device selected.
3) During this procedure you will be asked if you want to SET AS NEW PHONE. It is important to select YES to this option. This procedure takes some time...15-30 minutes
4) Set up your options for syncing from iTunes under the Info tab. If you change any settings here and ALLOW it, syncing will automatically happen. Make sure your calendar is being synced.
5) Check out the results...should be good.....I needed to sync a number of times to get everything back to normal.
6) Since doing this, the calendar syncs as it should and did before the upgrade, alone with everything else I want to sync.
Good Luck

Spotlight and iCal search not working after upgrade to Leopard

I recently upgraded my MBP to Leopard (10.5.7), and everything seemed fine. Except search in iCal wasn't working. I looked in forums and found a suggestion - renaming Calendar Cache in Home>>Library>>Calendars, then restarting iCal. iCal rebuilt the Calendar Cache (or looked like it was, progress bar and all), but search still wasn't working, failing to bring up events I was looking right at.
Then I tried to use Spotlight, and it didn't seem to be working either. I tried searching for Safari, and after a brief pause, Spotlight said "No Result Found." I confirmed Safari is in fact still on my MBP and working (opened from applications folder). After some more hunting on forums, I found a thread talking about how to force Spotlight to re-index, figuring that was at least Spotlight's problem. Here's the thread - http://forums.macrumors.com/showthread.php?t=381832
I tried what it suggested, using the command line in Terminal, but Terminal just spat back "No Index." So now I'm stumped. Any ideas? I've already tried rebooting, to no effect, though I'll try it again tonight.

Well, thanks again for all the suggestions, but I sort of stumbled on the fix - which turned out to be upgrading MacFUSE. I had forgotten I installed that so I could read/write to my BootCamp Windows partition under Tiger, and a couple times when I would restart my computer I'd get an error message about MacFUSE (ironically, the error claimed my OS was out of date, but it was really MacFUSE that was out of date).
After I updated to the latest version of MacFUSE and restarted, Spotlight started indexing. Now it works just fine. Not sure if this is a known issue, but it seems that was most likely the problem.
Now I just have to figure out why the search feature in Calendar doesn't work... already tried rebuilding the Calendar Cache multiple times. Any ideas for that one?

Exchange Calendar availability not working after upgrading to Mountain Lion

After upgrading to Mountain Lion cannot longer see calendar availability on my Exchange account, before upgrading it worked ok - anyone has the same problem?

Had the same problem on 2 Macs (iMac and MBP) after downloading ML last night, could not access my Exchange calendar via iCal. Deleted the accounts from iCal, then reloaded them, now all seems to work

System sleep and shut down not working after upgrade to windows 10

HiI upgraded my OS from win 8.1 to win 10.After the upgrades the system shutdown and sleep are not working properly.It's like when I shutdown/sleep the system ,the screen shuts down but the power key keeps glowing and also the battery keeps draining.So eachtime I have to foercefully press the power button to shutdown the system. I have updated the display driver . Please someone suggest, what to do ?

Hi there , Thank you for visiting the HP Support Forums and Welcome! I read your post on the HP Support Forums and seen that you are having issues with your HP Pavilion 15-n260tx Notebook PC and the Sleep/Shut down options. It sounds like you might be having an issue with one of the features of Windows called Hybrid Shutdown that is used for the Fast Startup feature. Here are a couple of links for you about Fast Startup, Hybrid Shutdown and How to Shut down your Notebook completely. They also have some troubleshooting steps in them. 1. Fast Startup - Turn On or Off in Windows 10.2. Shut Down Computer in Windows 10. If those do not work, I do have some more documentation for you to read and try. 1. Shut down (turn off), sleep, or hibernate your PC - This document is from Microsoft. 2. HP Notebook PCs - Managing Power Options (Windows 8)3. HP PCs - Sleep and Hibernate Issues (Windows 10, 8) Sometimes a BIOS Update will work. You can update all of your drivers by going to the HP Driver's website or by using the HP Support Assistant. On the Driver's page there is not an update for the Windows 10 Column, but there was an update that just came out under Windows 8.1 on Aug 7, 2015 that should work for your Notebook. Another fix that may work is to Run the Troubleshooter. Please follow this link to run the Windows Update Troubleshooter. I hope this helps! Have a great day!

Office 2010 MUI in Finnish and Save and Send function not working after upgrading to Lync 2013 MUI

Problem is as follows. Used to have Office 2010, Outlook 2010 and Lync 2010, everything was working. People used it in Finnish and seemly quite a many of them used the Talleta ja lähetä (Save and Send in Finnish) in Office products.
After upgrading Lync to 2013 version, with Finnish language pack installed with it, the Save and send does not work in Office 2010 if it is used with Finnish as display language. When you try to use it you get a Mapi error and reason is undefined or something,
hard to say what it is exactly in english as the error message is in finnish. On those machines if the display language is changed back to english the Save and send works as it should.
Any ideas?

The problem was caused by the Language Packs for Lync 2013 or Office 2013. Without them all works.
And if you want to just unisntall the 2013 lang packs, then you also need to repair install the office 2010 ones to make it work again.

Will iCloud mail and calendar sync still work after upgrade to iCloud drive?

Similar Messages

Maybe you are looking for