Will Illustrator CS Work Properly On OS 10.5.8?

Hi, My mac has 10.5.4 OS installed and I am wanting to update to 10.5.8.
Will I have any problems running my Illustrator CS or Photoshop CS on the newer mac update?
Thanks

The way to safely try this is to install the system on an external drive boot into that drive and install AI and S CS on that system and tes it out running off of the external drive.
This wil defintely work with an intel processor but I do not know about a power pc.

Similar Messages

Clicking on iTunes ikon and I get the message the item iTunes.exe that this shortcut refers to has been changed or moved, so this shortcut will no longer work properly. What can I do, I can't open Itunes. I have over 4000 songs in iTunes that I had

When I click on the iTunes ikon I get a box pop up which reads Problem with shortcut. The item iTunes.exe that this shortcut refers to has been changed or moved, so this shortcut will no longer work properly.
My computer which is a packard bell vista operating system, recently stopped working as the power supply overheated and blew up and it has recently been sent back to the Know How team at PC world and it seems to be since it came back I now cannot open iTunes. I have also tried to search for iTunes in the search bar, I can see several files, but can't seem to open any of these either. I think that quicktime isn't working, either.
I have over 4000 songs in iTunes that I had recorded from my collectiong of CD's am going to loose all these now? Can anyone help, with very easy instructions as I really don't know what I am doing??
Thanks

I would copy over the entire thing if you have room. With iTunes 10.4 though, you can download any previous iTunes purchases you have made in the past with your current iTunes account. While in iTunes, look at the left hand side of your screen and select "Purchases" and look at the bottom right corner of the screen and select "Download Previous Purchases". If you have an iPhone, iPod and/or iPad...you can do the same thing from each device. Nice new feature...just remember that those ripped CDs need a back-up!!! Enjoy...

Getting error message : the item Itunes.exe that this shortcut refers to has been changed or moved so this shortcut will no longer work properly. I get this either using the start menu or the desktop shortcut. I tried going to programs /itunes and repair.

Getting the error message:
the item Itunes.exe that this shortcut referes to has been moved or changed so this shortcut will no longer work properly.
I tried going into the control panel/programs /itunes and selected repair which didn't fix it. Any suggestions on restoring the broken shortcut without removing and re-installing the program?
Running windows 7 home premium SP1
Thank you

I think it is some sort of permissions issue preventing the installer from updating the shortcuts. Is your account an administrator of the machine? If it is and you still have the problem then you may need to explicitly use the "Administrator" account for the install.
tt2

I just downloaded the latest itunes update 11.1 and now I get an error messages saying "The item 'iTunes.exe' that this shortcut refers to has been changed or moved, so this shortcut will no longer work properly."

I just downloaded the latest itunes update 11.1 for windows 7 and now when I try to open itunes with the shortcut on my desktop I get this error message: "The item 'itunes.exe' that this shortcut refers to has been changed or moved, so this shortcut will no longer work properly." I can't open itunes at all. Is there anything I can do or is there a problem with the new update?

Start > Programs = Firefox
Does that shortcut work?
If so, delete the current shortcut that is in the Quick Start tray and drag the one that is in Start > Programs down there.

When trying to open lightroom I get a message that says, "The lightroom.exe that the short cut refers to has been changed or moved, so the short cut will no longer work properly. Do you want to remove this short cut? The program has opened and worked fi

When trying to open lightroom I get a message that says, "The lightroom.exe that the short cut refers to has been changed or moved, so the short cut will no longer work properly. Do you want to remove this short cut? The program has opened and worked fine in the past.

You have (probably accidentally) moved or deleted the Lightroom program. You need to find it (have your operating system search for lightroom.exe) and move it back to where the shortcut expects it to be.

Will Dreamweaver CS4 work properly with 10.6.1 Snow Leopard?

Hello
Can anyone tell me please, if Adobe Dreamweaver CS4 work properly with my MacBook OS 10.6.1 Snow Leopard? Adobe state "Mac OS X v10.4.11–10.5.4" in the system requirements, but does this mean, in practise, that Dreamweaver will not work properly with Snow Leopard?
I have tried to find info about this here, but have spend ages wading through masses of complaints about various applications crashing for people after they upgraded to 10.6.1 Snow Leopard. Personally, touch wood, I've had no problems with Snow Leopard, but I only really use it for Internet surfing and word processing (my work, music stuff on Logic Pro 8, is done on my Mac Pro which came with Leopard and which I am NOT upgrading - not yet!).
I have also attempted to get an answer from Adobe - I 'phoned their "Pre-sales enquiries" number 0800 028 0148 (in the UK) and spoke to someone who sounded as if she was on the moon and who clearly had absolutely no idea what I was talking about. I gave up with them! They didn't give an email address to ask on.
I'd be very grateful if anyone can give a clear, authoritative answer please - if possible.

I've been a Mac user since 1987 and have never upgraded the OS too soon after a new version was launched. Any new OS, like new houses, will have a 'snagging list' - unforeseen problems that arise and need to be sorted before your purchase is truly habitable and functions as expected.
But the stability of OS X 10.5 paved the way for my lapse of judgement when I upgraded to Snow Panther last week, while its compatibility with some major software is still clearly too buggy.
I've been using Dreamweaver (DW) CS4 successfully on OS X 10.5 for some time. Since installing OS X 10.6.1 I now have problems with DW, which I've alerted Adobe to.
When using Design View in DW CS4, any formatted text - from html tags to css tags - disappears from the Design view. The code appears correctly in the Code window and even if you highlight text that has coding attached in Code view - eg text with a url link attached - the Design view continues to ignore it and removes the text from its view. I've discovered that my heading tags (h1, h2, etc) all make the text disappear in Design view in a way that would be the envy of members of the Magic Circle! The only thing that seems to get through is text that is surrounded by paragraph tags.
Thing is that 'Preview in Browser' shows the page correctly (except in Opera, which I've only installed since installing Snow Leopard, so I can't say how this displayed in the previous OS versions).
Also when I upload the site to the server it all seems to display more or less as it should.
So currently it seems that DW CS4's Design view is no longer WYSIWYG! Expect to find lots of text hidden in Design view and have to use Code view much more.
It would be nice to think that Apple and Adobe would talk to each other and work it out between them.
re: Dreamweaver, I'd check back to Adobe.com regularly to see when they upgrade the OS requirements to 10.6.1 (I hadn't spotted before I bought Snow Leopard that they only go up to 10.5 in their OS recommendations).
My advice if you're thinking of upgrading to Snow Panther: delay it until it more of it works compatibly with your major applications. Check the OS spec from each software manufacturer first. Meanwhile I'll just have to wait patiently for Apple & Adobe to get their act together...
Message was edited by: bcmartin

WAP4410N - Will these ever work properly?

I have owned one of these for about 2 years now, and have sold many of these to clients. Luckily, none of them get used too much as they require constant rebooting, and it would appear as though all versions of the firmware are unreliable. Some simply don't work, other work for a day or two at a time between reboots.
Does anyone have a solution to getting these to work properly? When I say properly, I mean, you turn it on, configure it and then use it. That's it. No rebooting, not even once a year.
Anyone?

I have 3 x WAP4410N and had lots of issues. Now they are stable. I think it's the settings below in BOLD that count.
But I did first reset the unit to factory settings; upgrade firmware; restart; and then enter all settings MANUALLY. All as per Cisco instructions. Do not just install the fw over the old fw; and do not import your settings. But I don't think any of this made any difference, but do it anyway for sure.
Here is my config. Anything not mentioned has not been enabled. Settings in BOLD are important I think - and are settings folks have mentioned that have solved issues for them. YMMV.
Static IP address
Force LAN Port Speed to 100M: Enabled
Discovery (By Bonjour): Enabled
Wireless Network Mode: B/G/N Mixed
Wireless Channel: 2
Wireless Isolation: (between SSID: Enabled)
Security Mode: WPA2-Personal
Wireless Isolation: (within SSID: Disabled)
WPA: AES
Pre-shared Key: All lowercase 11 a-z characters. No funny characters or numerals.
Key Renewal: 36000
Wireless Connection Control: Disabled
VLAN: Disabled
Country: UK
Worldwide Mode: Disabled
Channel Bandwidth: 20MHz
Load Balancing: Disabled

HT3529 Is iMessage down? And when will it be working properly ?

I'm texting other iPhone users and the iMessage stops at the end before sending and then just turns into a text message. Please need help. When will iMessage start working ? Are the iMessage servers down?

Both myself and my best friend have had issues with iMessage today. Tried to turn it off and on again and now it's not working at all and is "waiting for activation". I haven't asked any of my other iPhone friends, but am starting to wonder if it's system wide?

Will Illustrator CS work on mac 10.5.8?

I have an opportunity to acquire a new copy of Illustrator CS (no number). I'm using a mac os x 10.5.8. Will it function on my mac?

Yes, it will - I'm doing just that myself without problem.
Regards
AdrianLeaman
http://www.adrianleaman.com

I downloaded iTunes 10.6.3.25 and set it up, when I click on the icon I get this message: The item 'iTunes.exe' that this shortcut refers to has been changed or moved, so this shortcut will no longer work properly. Do you want to delete this shortcut?

I have tried the solutions that I have seen already. Restarting the computer and then repairing through the Control Panel. It didn't work. I have removed the software and done multiple restarts and reinstalls. I'm running on Vista 64 bit and the last iTunes from last spring ran fine. Any other ideas? Or somewhere I can go to get an older version of software? Btw, when I tried to start Quicktime, I got the same message.

Start > Programs = Firefox
Does that shortcut work?
If so, delete the current shortcut that is in the Quick Start tray and drag the one that is in Start > Programs down there.

When i click on the firefox icon in the shortcuts tray, get the following message: The item 'firefox.exe' that this shortcut refers to has been changed or moved, so that the shortcut will no longer work properly

I uninstalled and re-installed FF, but this keeps happening. This is the third time i am getting this issue

Start > Programs = Firefox
Does that shortcut work?
If so, delete the current shortcut that is in the Quick Start tray and drag the one that is in Start > Programs down there.

Bug Found: Illustrator CC *always* merges layers when opening a DXF file - CS6 works properly

Bug Found: Illustrator CC *always* merges layers when opening a DXF file - CS6 works properly. When opening a DXF, CC merges multiple layers into one, even if you have the "Merge Layers" unchecked. Can a forum admin employee get this submitted as a bug report? Thanks.

Thank you Larry. I just submitted this bug report pasted below at the link you provided.
******BUG******
Illustrator CC 17.0.0 *always* merges layers when opening a DXF file, even if you have the "Merge Layers" unchecked.
1. Open a DXF file that contain multiple layers in Illustrator CC 17.0.0
2. Uncheck the "Merge Layers" button.
3. Click OK.
Results: It has merge all the layers into one layer.
Expected results: It should open with multiple layers preserved. Illustrator CS6 works properly.

Satellite M40: USB Audio doesn't work properly in ACPI mode

Hi all,
I just bought a Satellite M40 laptop which purpose will be to be used as a mobile audio system.
For that, USB audio devices are a great solution.
Unfortunately, although it was working properly while recording (sound is perfect with all USB Audio compliant devices I could test), there's an issue in Playback as I got lots of clicks and pops.
After lots of tryings and google searches, I fixed the problem by switching from ACPI computer to Standard PC mode.
That's a workaround.
But this way, I don't know anymore what's my battery status, and my laptop do not shutdown automatically.
In fact, my laptop is no more managed as a laptop :(
I suspect a very serious issue in one of the Toshiba components management. Especially, I would not surprised to be told that power management leads to some regular short system freeze, and thus the 10ms USB audio buffers fall into underrun.
This would not bother me so much if I was not part of the technical support team of a company that is also launching some new USB audio products that will fail to work properly with laptops.
My question is :
Is there any driver / bios update that gets rid of this issue ?
If someone from the Toshiba technical support wants to handle this issue directly with me, I would be pleased to help him, as I'm concerned professionnaly and personnaly.
Thanks in advance.
[Edited by: admin]

Thanks for your help Jeffrey,
But
- I checked with several USB audio devices, from different providers. The issue is the same.
- I checked with several applications (Winamp, MediaPlayer, ...). Same issue.
- I checked these devices with different laptops (tried 3 different models) : I have NO PROBLEM.
- The USB devices I use do not need external power supply. I tried EDIROL UA-25 which works perfectly in any case, but not with my TOSHIBA M40.
- I agree that some application can disturb audio management. But in that case, I would like to know which one from the standard installation is the cause, so that I can fire it. It's anyway curious to see that switching from ACPI to Standard mode fixes the issue, as all applications are still there. I would say the applications are not the issue, then.
- All Microsoft updates have already been installed
- I think I tried everything that could be done by closing applications, changing power management modes, system cache, ...
- I have no other hardware device connected/installed (printer or whatever)
- RECORD works perfectly. So if some application layer was disturbing, I would bet it would bother in Play and Record as well.
CONCLUSION : Unless someone can prove it (and I'm ready for some testing), I still believe there's a harware/driver layer that is faulty in the Toshiba management.
And I don't need to contact the manufacturer, as I AM one of them :)
If you are part of the Toshiba support, let me know. Maybe we can investigate together.
FYI : I had to create a new user ID for this forum as it did not accept the one I created this morning anymore :(
Thanks anyway.

Cannot get Dreamweaver CS5 To work properly

I have installed and uninstalled Dreamweaver CS5 several times, I have deleted the config file and still cannot get Dreamweaver to work properly. When I start dreamweaver CS5 the spash screen doesn't display properly, when the program opens up I am unable to manage sites all that is visible is the text box for site name and site address, nothing else is visible.
I have run a registry clean program to remove any traces of previous versions of dreamweaver to no avail. I do not receive any error messages at any point dreamweaver will just not work properly.
Thank you for your assistance.

Registry cleaners don't remove everything. Many files are in hidden folders within the user accounts on the operating systems. Have you tried the clean tool?
http://www.adobe.com/support/contact/cscleanertool.html
Also, something else to consider, try making another user account on the computer and see if that helps. I've seen user profiles on computers become corrupt and can cause this issue as well.

CC 2014.2 Illustrator and Photoshop will not work properly on 10.7.5

I have recently download Illustrator and Photoshop CC 2014.2 on my MacBook Pro version 10.7.5.
I notice some of the functions where not working properly. For example Bounding box in Illustrator will not appear for rectangle tool. Color strip on the color box will appear as sold color instead of strips of different colors for me to choose.
I called the Adobe to find out why is this happening and they told me it was because I don't have the latest OS on my MAC. Do to company policy I can't upgrade my OS to the latest version. Adobe send me the link that is not working for two times and need the correct link ASAP.
Can you guys please send me the right link for me to downgrade?
Thank you

Piruki have you tried utilizing the Previous version option within the Creative Cloud Desktop application? You can find additional details under the install Previous version section of CC desktop lists applications as "Up to Date" when not installed - http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html.

Will Illustrator CS Work Properly On OS 10.5.8?

Similar Messages

Maybe you are looking for