Will increasing the buffer size make flash streaming video stop stalling?

I have surmised all this on my own so it could be just a fantasy, but:
I am often the victim of slow internet connections. This means that when I try and watch streaming video it constantly pauses. It's my understanding that increasing the buffer size of flash would help prevent this but I can't figure out how to do that.
Thanks

You can pause the video just long enough for the player to load enough content. Most Flash player show a loading bar if you hover the player. For short pieces you can load the entire content before starting the play.

Similar Messages

  • How to increase the buffer size ?

    Our BI system displays the following message when I execute a query on the web : buffer too small
    How to increase the buffer size ?
    Thanks in advance

    Indeed, we are using  Bex Web 7.0
    The query uses a big structure and when I execute it on the web, it takes a long time (> 5 min) and I receive folowing message on  top of the result page : " could not buffer query structures. Buffer too small "
    When I execute the query in Bex analyzer, it takes a long time too but we dont get the message
    I have checked the cache size:
          -  Local cache : 100 MB
          - Global cache : 200 MB
    Please let me know any solution as there is no BASIS  TEAM. The guy who installed the soft was a consultant and is no more reachable.
    Thanks in adavnce

  • How to increase the buffer size for Oracle?

    After I installed the patch 9.2.0.4, I kept getting 'ORA-03113: end-of-file on communication channel' error. According to the metalink, increasing the buffer size may solve this problem. I found when I set the trace on, this problem was gone, and after I set the trace off, it came back again. I am not sure if setting the trace on increases buffer size automatically or not, but I want to start from here.
    No matter how easy it is, I really didn't change buffer size before, can anyone show me how to do that?
    Thanks a lot.

    Hi,
    I think they asked to increase the db buffer cache size. You may try this
    alter system set db_cache_size=<new size in bytes> scope=both;
    Cheers
    Muneer

  • I recently downloaded and installed OS X Mavericks. The font size on the display is smaller. How can I increase the font size. Also everything seems to be running a tad slower. Will this speed up?

    How can I increase the font size in all my displays after it shrank after installing OS X Mavericks?
    How can I increase the speed after installing OS X Mavericks? It is slower now.

    Reset the page zoom on pages that cause problems: <b>View > Zoom > Reset</b> (Ctrl+0 (zero); Cmd+0 on Mac)
    See http://kb.mozillazine.org/Zoom_text_of_web_pages
    Your plugins list shows outdated plugin(s) with known security and stability risks.
    * Shockwave Flash 10.0 r45
    * Next Generation Java Plug-in 1.6.0_17 for Mozilla browsers
    Update the [[Java]] plugin to the latest version.
    *http://java.sun.com/javase/downloads/index.jsp (Java Platform: Download JRE)
    Update the [[Flash]] plugin to the latest version.
    *http://www.adobe.com/software/flash/about/

  • Will increasing the memory from 4Gb to 8Gb make a big difference to the speed of my Intel Core Duo 2 Mac mini?

    Will increasing the memory from 4Gb to 8Gb make a big difference to the speed of my Intel Core Duo 2 Mac mini?

    Well, technically no, CPU will remain the same speed. But having 8 gig will give you some room for memory hungry apps and run better with multiple apps.
    Adding a SSD drive will give a second life to your macmini. I did mine a few weeks ago (240 gb SSD ) and also went from 2 to 4 gig ram. It's like having a new computer!
    Good luck!

  • Is there a way to increase the visual size of audio in Flash CS6?

    Basically, I'm trying to lip sync but I have a problem in that the audio "waves" are so small that I can barely see them, and I use these to base where I should put my lip frame at.
    So is there a way to increase the visual size of the audio so I can see it better?

    Chanege the size of the frame

  • Where can I change the buffer size for LKM File to Oracle (EXTRENAL TABLE)?

    Hi all,
    I'd a problem on the buffer size the "LKM File to Oracle (EXTRENAL TABLE)" as follow:
    2801 : 72000 : java.sql.SQLException: ORA-12801: error signaled in parallel query server P000
    ORA-29913: error in executing ODCIEXTTABLEFETCH callout
    ORA-29400: data cartridge error
    KUP-04020: found record longer than buffer size supported, 524288, in D:\OraHome_1\oracledi\demo\file\PARTIAL_SHPT_FIXED_NHF.dat
    Do you know where can I change the buffer size?
    Remarks: The size of the file is ~2Mb.
    Tao

    Hi,
    The behavior is explained in Bug 4304609 .
    You will encounter ORA-29400 & KUP-04020 errors if the RECORDSIZE clause in the access parameters for the ORACLE_LOADER access driver is larger than 10MB and you are loading records larger than 10MB. Which means their is a another limitation on read size of a record which is termed as granule size. If the default granule size is less then RECORDSIZE it limits the size of the read buffer to granule size.
    Use the pxxtgranule_size parameter to change the size of the granule to a number larger than the size specified for the read buffer.You can use below query to determine the current size of the granule.
    SELECT KSPFTCTXPN PARAMETER_NUMBER,
    KSPPINM PARAMETER_NAME,
    KSPPITY PARAMETER_TYPE,
    KSPFTCTXVL PARAMETER_VALUE,
    KSPFTCTXDF IS_DEFAULT,
    KSPPIFLG MODIFICATION_FLAG,
    KSPFTCTXVF VALUE_FLAG
    FROM X$KSPPI X, X$KSPPCV2 Y
    WHERE (X.INDX+1) = KSPFTCTXPN AND
    KSPPINM LIKE '%_px_xtgranule_size%';
    There is no 'ideal' or recommended value for pxxtgranule_size parameter, it is safe to increase it to work around this particular problem. You can set this parameter using ALTER SESSION/SYSTEM command.
    SQL> alter system set "_px_xtgranule_size"=10000;
    Thanks,
    Sutirtha

  • Increasing the font size for printing in FB03

    Hi All,
    I am trying to print a FI document from FB03.
    But, i am getting print only 1/4th of the A4 size paper.(i mean only 25% of the page is covered and remaining 75% is blank) Now, I need to increase the font size so that it covers more portion of A4 size paper.
    I tried to change "Format settings" in Print settings but in vain.
    Please advise
    Thanks & Regards,
    Pavan Kumar.

    Hello,
    Please make sure that the format settings that you have changed has taken effect.
    X_65_200 is suitable and it gives the print with 90% of the page.
    When you change the format settings it will change the font size according to properties.
    Regards,
    Ravi

  • Is there a way to increase the font size for the "songs" and "artists" lists in the new music app for iPad 2 (iOS 5)? It is too small for me.

    Is there a way to increase the font size for the "songs" and "artists" lists in the "music" app for iPad 2 (iOS 5)? It is smaller than the previous version.

    falkner09 wrote:
    is there really no fix for this?
    It would depend on your definition of "Fix"
    Your iPod touch running OS 4.2 has a ZOOM feature which will enable you to see the screen more clearly.
    To turn Zoom on or off got to:
    Settings > General > Accessibility > Zoom and tap the Zoom On/Off switch.
    _To Zoom in or out_:
    Double-tap the screen with three fingers. By default, the screen is magnified 200 percent. If you manually change the magnification (by using the tap-and-drag gesture, described below), iPod touch automatically returns to that magnification when you zoom in by double-tapping with three fingers.
    Increase magnification: With three fingers, tap and drag toward the top of the screen (to increase magnification) or toward the bottom of the screen (to decrease magnification). The tap-and-drag gesture is similar to a double-tap, except you don’t lift your fingers on the second tap—instead, drag your fingers on the screen. Once you start dragging, you can drag with a single finger.
    _Move around the screen_:
    When zoomed in, drag or flick the screen with three fingers. Once you start dragging, you can drag with a single finger so that you can see more of the screen. Hold a single finger near the edge of the display to pan to that side of the screen image. Move your finger closer to the edge to pan more quickly. When you open a new screen, Zoom always goes to the top-middle of the screen.
    _Large Text_:
    Large Text lets you make the text larger in alerts, and in Calendar, Contacts, Mail, Messages, and Notes. You can choose 20-point, 24-point, 32-point, 40-point, 48-point, or 56-point text.
    Set the text size: In Settings, choose General > Accessibility, tap Large Text, then tap the text size you want.
    I hope this has helped a little - other than this option I think it pretty much is what it is.
    BTW - This information can be found on page 208 of the iPod Touch iOS 4.2 Users Guide.
    Best wishes..
    Ricky

  • Why is that saving as PDF increase the file sizes?

    Hola
    I've been notice that when I save a file as PDF, in CS5  it increase the file size to double that before.
    Even saving it with the same setting than before.
    For example, most of my Business Card file that I sent to print, use to be 1.5 or so megabytes
    Now if I open the same file, --or a new file-- and save it, it will increase it to double that size
    Any ideas?
    Thanks

    Hola and Thanks for your help
    Ok, I've been using Photoshop since version 6 or so (around year 2000)
    Just upgrade to CS5
    Before, for example, I'll make a file in PS, merge the layers, open a new file whit the same dimensions, resolution etc,
    and save this file as PDF to send to printers.
    Tthe file(s) that I have or were create them in CS4, than saved as PDFs have a file sizes of 1 to 2 megabytes as average.
    The NEW files (in the same sequence) that I create now, have an average of 3 Mbytes
    Even do, I save them with the same --I believe-- setting in PDF
    There's may be a new feature in PDF save dialogue box that I'm not getting?
    or, it just more information that it is put into?
    Thanks

  • How to increase the font size in the safari tool bar

    Hello,
    I am trying to set-up Yosemite for my mom who is a senior.  The toolbar and address bar for safari seem to be quite small.  Does anyone know how to increase the font size in the tool bar and address bar?  I already figured out to make the font size bigger on a webpage which is nice but the rest of the interface, though pleasing to look at, is quite miniscule.
    Hope someone can help.

    I too would like an easier way to do it. The only way that I have found  (& it works for all applications, desktops Document & Download files) is to decrease the size of your Screen display from 2560 by 1440 ( this is your "Default for display") to 1920 by 1080. This is accomplished by going to "Accessibility Preferences" in your menu bar or through Systems  Preferences and choosing the DISPLAY icon, then unchecking the "Default for Display" Setting and then check "Scaled".
    Your screen resolutions will then appear in the drop down box & you can choose a smaller display (e.g. 1920 x 1440), then all print will appear larger on the screen.
    If anyone knows a slicker way, I 'm all ears (actually "eyes" would be more appropriate.
    I hope this helps you.
    -fpn7

  • HT2523 Is there a way to increase the size of textedit text on the screen without increasing the font size? (as can be done in WORD for MAC)

    In Microsoft Office for Mac WORD I can make text appear larger on the monitor screen without increasing the font size for printing purposes.  I have not been able to figure out if/how this can be done in TextEdit.  In TextEdit, if I set the font size to between 10 and 12, the text appears very small on the screen.  But if I increase the font size, the font size will be way too large when I print such a document.

    Thank you very much for your prompt reply and suggestion. 
    Actually after I posted my question, I saw link to Text Edit viewable font, which pointed out the small up and down arrows in the lower right corner of the Text Edit screen. 
    However, it is also good to keep in mind the Universal Access options.

  • How to increase the font size in list view

    I have Aperture open in list view and even tho I have the slider all the way to the right, so the images are larger to see, the actual font size of the various topics in list view has not increased.  I have trouble seeing and need the font size to be made larger.  Within Aperture = don't want to do the change to the whole computer, just to the list view in Aperture.  Thanks.

    Aperture does not support to increase the font size.  If you do not want to reduce the resolution of the display to make the fonts larger, you could enable Accessibility and activate a local Zoom.
    This way you can zoom in on text, but your images will show in the best possible resolution.
    The Accessibility options are activated from the System Preferences > Accessibility.
    You can toggle zooming using ⌥⌘8,    zoom in using ⌥⌘=, zoom out using ⌥⌘-  .

  • After upgrading to Lion, the Finder will increase the virtual memory while using external HD

    after upgrading to Lion, the Finder will increase the "virtual memory size" while using external HD. I check it using Activity Monitor and found that "Finder" wll increase the "Virtual Memory Size" and "Private Memory Size". and then after a while. the system told me my HD is full and hanging there.
    My External HD is 1TB. and I have installed new version Paragon NTFS for Mac V.9.01. I am not sure it is related or not.
    but I attached my external HD. the "Finder" will start to increase the "Virtual Memory Size".
    please help out this case and solve this issue.
    thank you !!!

    The one has nothing to do with the other. Virtual memory size and Private memory size are used by developers to analyze their software. it has nothing to do with anything related to the user.

  • How can I increase the font size of my email when I print it out, it is printing tiny

    How can I increase the font size when I print out emails, it is printing tiny size?

    In the Print dialog window, click the small reveal-button to the right of the printer's name -
    The window will expand to show additional settings (similar to 'old' Page Setup) -
    Be sure "Scale:" is set to 100% and the 'Keep apparent font size' item is checked.

Maybe you are looking for