Will indesign allow me to create a calendar using the lunar cycle?

I need to be able to create a calendar using the lunar cycle instead of the standard gregorian cycle. Does Indesign's calendar wizard/software allow me to do this or would I have to create it manually through something like photoshp/illustrator?

InDesign does not come with a Calender Wizard script, so you probably downloaded this elsewhere. you'll have to ask where you got it from.
(If this "lunar cycle" thing is not in the feature list of that script, chances are it's not hidden in there somewhere either. If I included such a feature, I'd make sure to advertise it. If it isn't available, you can probably contact the author and see if s/he is willing to add it.)

Similar Messages

I created a calendar in the wrong calendar year. I need to change it from 2012 to 2013. Help!!!

I created a calendar in the wrong calendar year. I need to change it from 2012 to 2013. Help!!!

N000295, I am afraid you will have to start all over again. There is no way to change the year of the already created photo calender.

ITunes 11.0.2.26 will not allow me to do a search at the iTunes store. How do I fix it?

iTunes 11.0.2.26 will not allow me to do a search at the iTunes store. How do I fix it?

Stop whining and you're much more likely to get help.
Managing content on the iOS device has not changed in any way with the new version of iTunes.
It is still possible to "drag and drop" content onto the device, my personal opinion is that this is a silly way of managing content.
Simply select the content desired to sync to the device and synce.
IF you really want to "drag and drop" content, then Manually manage content on the device must be select from the summary tab for the device. Then drag and drop content all you desire. This may require having the sidebar displayed. To display the sidebar, type Cntrl + S.

Firefox 6 will not allow you to paste a cookie into the addressbar like all previous versions have. I use software to replace web chat and must do this and have been able to do it in all past versions. What's the deal?

Firefox 6 will not allow you to paste a cookie into the addressbar like all previous versions have. I use software to replace web chat and must do this and have been able to do it in all past versions. What's the deal?

Thank you for your response.
After searching around for any pointers to my problem, the above fixes I listed were the things that came closest to maybe addressing the issue, that I was able to locate. But since none worked, and as you pointed out, it is now clear they will only help towards viewing sent images rather than helping with inserting any images in the body of the email, which is the problem I suddenly started facing today.
Coming to your suggestion, on opening the Write window, the Insert choice on the menu bar is indeed available. And I had already tried using that, by clicking on the '''Insert ----> Image''' option listed. That opens
up the "Image Properties" box but using that has not resolved the matter either. It results in an image box getting inserted within the email but without the actual image itself.
Plus, normally I am able to use the '''Paste''' function in the Edit menu or through right-click, but today the (Cut/Copy/Paste) functions have gone inactive, thereby disallowing me to use that to place an image within the email.

Will not allow images on websites that it used to allow, for example, when trying to post on Craiglist, it will not show the images I have to copy in order for CL to approve my post

will not allow certain images - for example, cannot see the images I need to copy on Craigslist in order for CL to approve my post.
== This happened ==
Every time Firefox opened
== we moved the computer and reconnected it

Check the image exceptions: Tools > Options > Content: Load Images: Exceptions - See [[Options window - Content panel]]
See [[Images or animations do not show]] and http://kb.mozillazine.org/Images_or_animations_do_not_load

Will InDesign accept equations set in MS Word using MathCAD and/or Mathematica?

will InDesign accept equations set in MS Word using MathCAD and/or Mathematica?

I didn't try those. BUT. Equations from the MS Equation Editor are not "accepted", you have to save them as eps or pdf or something. My best option so far is MathType, and a plugin mt.editor lets you edit inside ID

My ipad air will not allow me to access since I downloaded the new version 8.3 operating software

My ipad air will not allow me to access since I downloaded the new version 8.3 operating software

When I try to open the slide to upgrade screen comes up and then the request for passcode and then the apple loading screen then Hello then update completed screen I select continue another apple with line showing progress then asking for password enter then Message and Face time a screen
then a get started screen and then another apple with line showing progress and then my opening screen shows for a split second and then back to the apple with progress for a split second and then it shuts down.

I purchased elements 11 - I have installed on work computer but it will not allow me to install on laptop stating the code has already been used. Can anyone help me install on laptop please?

I purchased elements 11 - I have installed on work computer but it will not allow me to install on laptop stating the code has already been used. Can anyone help me install on laptop please?

No, I have the music I want to move from the laptop to the phone selected. Then I go under file, devices, and try to click sync but it is not available to click.

I am automating the process of sending appointment reminders to my clients. I started with an alert with an email in calendar using the clients email address as a custom entry in my me card in my contacts. this was resulting in three emails being sent wit

I am automating the process of sending appointment reminders to my clients. I started with an alert with an email in calendar using the clients email address as a custom entry in my me card in my contacts. this was resulting in three emails being sent with slightly different versions of the same address (see my previous post). Heating someone else's suggestion I created a workflow file to send an email and calling that file from an alert on my calendar. This is working and sends only one email to the client.
My calendar is on I cloud and I access it from three different computers so I can keep my appointment calendar current. The files that send the email only exist on one computer. My other computers show error messages when those emails get sent. It seems that each computer wants to send the email. It's a small problem but is there a way that I could not get those alerts.
But appreciate any thoughts about this. It seems like both problems might be related to the iCloud system.
Thank you in advance,
Michael

Good work, catch so far Michael, does seem to be a "feature" of iCloud syncing, not sure what you could do to disable it.

Creating a mapping using the API

Hi Brian, I am curious about this use case - what's the reason you are looking to do it using the API? You can create several objects using the API and the most typical use case we have observed is where mapping developers create a pattern or what we call as a "template" - which is a mapping with various properties parameterized. For example you can create a mapping with the filter parameterized, or define a very generic mapping with source, target and the field map between those all parameterized. Once you do that, you can create a "task" for this mapping (known as Mapping Configuration Task) - that can be done using our UI or using our REST API. If you choose the latter, you can pass on parameter values as part of the API request. Suggest you to take a look at our new Developer Portal, and specifically at the sections Templates and REST API there. Feel free to post any further questions here. If you sign up to the developer program there, you will get much more direct help.https://community.informatica.com/community/technology_partner_network Amol

I was wondering about creating a mapping using the API. It clearly states in the Dev guide that this is possible, but when I perform a get mapping request, I don't see all the information given for a certain object. For example, I don't see an expression in the mapping object (although one exists when I view the object in Cloud). Has anyone else done this? Is it easy to create objects via the API? Thanks!

Help/Example needed for creating JMSQueues/JMSTopics using the MBean API

I am trying to create JMSQueues programmatically using the MBean API. When
I use MBeanHome.createAdminMBean(), a queue appears in the root of the
config file. This is progress, but the queue is in the wrong place! I need
the queues to be part of my JMS server's "destinations" as seen on the
console.
So now I am trying to use createConfigurationMBean() instead, but I can't
figure out what the "parent" parameter should be- no documentation! My
first guess was that the parent might be the JMSServer, but that doesn't
work.
Anyone have example code to insert JMSQueues and JMSTopics into a specific
JMS server's destinations?
Here is the code I tried... All goes well until the final
createConfigurationMBean call, where it throws a MBeanCreationException:
// Get the MBeanHome bean
Object obj = jndiContext.lookup("weblogic.management.adminhome");
MBeanHome mbeanhome = (MBeanHome) javax.rmi.PortableRemoteObject.narrow
(obj, MBeanHome.class);
// Get the server MBean
JMSServerMBean jmsServerMB =
(JMSServerMBean)mbeanhome.getMBean("examplesJMSServer",
JMSServerMBean.class);
// Create the new Queue
JMSQueueMBean jmsQMB = (JMSQueueMBean)mbeanhome.createConfigurationMBean
("weblogic.examples.jms.fooQueue", "JMSQueue", jmsServerMB);

Ok, I still don't see how I can do it differently with the admin tool. If
you want to see the commands I'm using, I can post them, but the basic one
is shown below in the previous message. We're trying to set up a script so
that developers can just run it and properly configure WebLogic with the
right components.
Thanks,
Michelle
"Michelle Baxter" <[email protected]> wrote in message
news:[email protected]...
I am using the weblogic.Admin tool, not doing this in code. I will attempt
to translate your advice when I get time again.
My commands look like this:
java weblogic.Admin -url 127.0.0.1:7001 -username system -passwordweblogic
CREATE -mbean "mydomain:Type=JMSQueue,Name=MyJMSQueue"
I create this, I create the JMSServer MBean, then do and INVOKE (insteadof
CREATE) and call the addDestination method, adding the JMS Queue MBeanthat
I created previously, using the same naming scheme as in the above CREATE.
"Viresh Garg" <[email protected]> wrote in message
news:[email protected]...
Daron Cole wrote:
You can use createConfigurationMBean with JMSQueueConfig but in the
end
I used
the code below to create a topic.The code that you posted is the right way to create queus/topics. alwayscreate admin mbeans to admin
server and let admin server internally create config Mbeans on the
managed
server as per the
location/targets that you set in admin Mbeans.
Queue's are the same, just replace the word
Topic with Queue and it should work. It should show up in the console
app.
MBeanHome home = (MBeanHome)ctx.lookup(MBeanHome.JNDI_NAME+".myserver");
ServerMBean myserver =(ServerMBean)home.getMBean("myserver",ServerMBean.class);
String topicName = "MyNewTopic";
JMSServerMBean jmsServerMB =(JMSServerMBean)home.getMBean("JMSServer","JMSServer","mydomain");
JMSTopicMBean jmsTopicMB =(JMSTopicMBean)home.createAdminMBean(topicName,"JMSTopic","mydomain");
jmsTopicMB.setJNDIName(topicName);
jmsServerMB.addDestination(jmsTopicMB);
Viresh Garg
Principal Developer Relations Engineer
BEA Systems
"Michelle Baxter" <[email protected]> wrote:
There is no JMSQueueConfigMBean. What do you mean?
"Daron Cole" <[email protected]> wrote in message
news:[email protected]...
Try JMSQueueConfig instead of JMSQueue.
"Michelle Baxter" <[email protected]> wrote:
Me too! I'm trying to use the weblogic.Admin class to set up
queues
and
topics and the JMS server. The same results in the config file:
the
queues
and topic were set up at the root, the JMS server was added, but
no
destinations, even though I invoked the addDestination method withthe
created MBean queues and topic as arguments. No exceptions, just
no
destinations on the JMS server resulted. What's the right order ofexecution
for this stuff??
Thanks,
Michelle
"Jude DeMeis" <[email protected]> wrote in message
news:[email protected]...
I am trying to create JMSQueues programmatically using the MBean
API.
When
I use MBeanHome.createAdminMBean(), a queue appears in the root
of
the
config file. This is progress, but the queue is in the wrong
place!
I
need
the queues to be part of my JMS server's "destinations" as seen
on
the
console.
So now I am trying to use createConfigurationMBean() instead,
but
I
can't
figure out what the "parent" parameter should be- no
documentation!
My
first guess was that the parent might be the JMSServer, but that
doesn't
work.
Anyone have example code to insert JMSQueues and JMSTopics intoa
specific
JMS server's destinations?
Here is the code I tried... All goes well until the final
createConfigurationMBean call, where it throws aMBeanCreationException:
// Get the MBeanHome bean
Object obj =
jndiContext.lookup("weblogic.management.adminhome");
MBeanHome mbeanhome = (MBeanHome)javax.rmi.PortableRemoteObject.narrow
(obj, MBeanHome.class);
// Get the server MBean
JMSServerMBean jmsServerMB =
(JMSServerMBean)mbeanhome.getMBean("examplesJMSServer",
JMSServerMBean.class);
// Create the new Queue
JMSQueueMBean jmsQMB =(JMSQueueMBean)mbeanhome.createConfigurationMBean
("weblogic.examples.jms.fooQueue", "JMSQueue", jmsServerMB);

Creating Workbench Templates Using the Workbook.

Hi Guys,
I am currently in the process of creating Workbench templates using the workbook. However, I am unsure how to define the order the channels will appear in the wb_page_configs tab. Currently these are the available fields in this tab,
CHANNEL_EXTERNAL_ID          STRING_TYPE
PAGE_EXTERNAL_ID                STRING_TYPE     .
CFG_NAME_RESC                CUSTOM
COL_POS                                      INTEGER_TYPE
IS_REQUIRED                BOOLEAN_TYPE
IS_FIXEDPARAMS                BOOLEAN_TYPE
IS_USE_CHANNEL_PARAM       BOOLEAN_TYPE
PARAMS                                      CUSTOM
Which of these fields defines which column the channel is being put in (Column 1 or Column 2) also, how do you define that in the workbook?
Which of these fields defines the order in the column (For example, At the top of Column 1, or the second channel in column 2) also, how do you define that in the workbook?
any help is appreciated, any templates of workbench configs done via workbook will also be greatly appreciated. Not sure if I am looking @ the wrong workbook tab in order to define these parameters, but it seems that this is the sheet that I should be looking.
Thanks.

Hi,
Let me try and explain it via an example.
You should first look to define the Template in the wb_pages tab. You can use the standard one which is: workbench.default_buyer_template. This is the Default Buy-Side Template.
Now coming to the wb_page_configs tab. Suppose you want to add the Contract Search channel in the Workbench view. For this your values would be:
CHANNEL_EXTERNAL_ID: channel.contract_search
PAGE_EXTERNAL_ID: workbench.default_buyer_template
CFG_NAME_RESC: Leave blank
COL_POS: 1
IS_REQUIRED: FALSE
IS_FIXEDPARAMS: FALSE
IS_USE_CHANNEL_PARAMS: TRUE
PARAMS: Leave Blank
Similarly, if you want the To Do List to appear in the right hand channel, the only difference would be that the Col_POS would need to be set to value = 2.
Hope this helps,
Vikram Shukla
Edited by: Vikram Shukla on Feb 1, 2012 7:42 PM

How to create a partition using the free space of an existing[SOLVED]

Hi Guys,
Since I could not install fifa 09 using wine on linux, I need to create a partition where I can install windows first in order to install fifa 09 on it. How can I create a partition using the rest free space of my , for example, /home partition?How can I do it in a secure way (meaning without doing something to my existing archlinux installation files and system files) ?
Thanks.
Please see this post:
https://bbs.archlinux.org/viewtopic.php?id=109402
Last edited by Archie_Enthusiasm (2010-12-08 19:23:46)

Use Parted Magic. But you *should* backup any important files just in case, regardless of method you use. You never know. Someone could unplug your computer, a power surge might happen, etc. A cousin of mine actually did something similar while I was gaming, the extension cord has a red button which he "accidentally" pressed. I would've cracked his skull had he done it while resizing a partition.
Anyway, the partitioning scheme should be the first thing you do when you decide go this route (dual booting). I remember about a year ago I forced myself to use Linux by formatting the entire drive to ext4, except for the 2 GB + 20 GB ntfs partitions. It was what kick-started me on this path. Here's my partitioning scheme for both computers, maybe you'll get an idea and do something similar:
Older computer:
2 GB ntfs - MicroXP
8 GB ext4 - Arch Linux + Home dir (to keep the dot files organized in one place)
20 GB ntfs - games partition
Rest is for media, formatted as ext3 with inode 128 (so it can be loaded as Read-Only in Windows too via Ext2fsd so they won't be affected in case of a virus infection)
New computer:
20 GB Windows 7
10 GB Arch Linux + home dir
50 GB games partition
Rest of the space is ext4 mounted to /media
Note that they're all primary partitions for remembering easier (sda1, sda2, sda3, sda4) instead of a combination of primary and extended which would probably look like sda1, sda5, sda6, sda7, etc.
Last edited by DSpider (2010-12-03 13:02:26)

After i have downloaded an album from iCloud to my new macbook pro. Itunes will only play one song at a time. If i hit the fast forward or back button will not do anything. I have to use the mouse to hit the next tidal in the album then hit play for it

after i have downloaded an album from iCloud to my new macbook pro. Itunes will only play one song at a time. If i hit the fast forward or back button will not do anything. I have to use the mouse to hit the next tidal in the album then hit play for it to play the next song. Or put it in the UP NEXT.

First, make sure these items have checkmarks next to their names in iTunes. Continuous playback only works on checked items. Itunes will play all checked items in a list whether or not they're from the same album.
If you see that nothing in your library is checked and you want to check everything, hold down Ctrl while checking an item. This checks everything.
Next, fixing the "1 of 1" problem is easily. Select all the tracks that make up the book/album. Let's say there are 15. Press Ctrl-I. Doublecheck that the album box is filled in with the name of the book, and if not, type it there. Enter "15" in the box for the total number of tracks. Click OK. Now all the items should be "1 of 15," "2 of 15," and so on.

? What can i do about this, i will have cancel this if i can not use the programs

good evening i have just purchased lightroom and photoshop on a 12 months contract and its now saying i am running a operative system that photoshop no longer supports ? What can i do about this, i will have cancel this if i can not use the programs

unless that message is erroneous, you'll need to upgrade your os to use whatever you dl'd.
with a cc subscription, you can use cs6, cc and cc 2014.
if you need more help, what os do you have?

Will indesign allow me to create a calendar using the lunar cycle?

Similar Messages

Maybe you are looking for