Will Indesign CC (9.0) open Indesign CC (2014) files

If so, great, if not, where can I download a back copy. My office hasn't upgraded and adding 2014 to the mix right now is not optimal.

You will likely get better program help in a program forum InDesign
The Cloud forum is not about using individual programs
The Cloud forum is about the Cloud as a delivery & install process
If you will start at the Forums Index https://forums.adobe.com/welcome
You will be able to select a forum for the specific Adobe product(s) you use
Click the "down arrow" symbol on the right (where it says All communities) to open the drop down list and scroll

Similar Messages

Will I be able to open InDesign CS6 files from the latest CC version?

Considering Cloud purchase and want to check compatibility. Will I be able to open InDesign CS6 files from the latest CC version? Thanks for any advice on this.

You can open files in CC from CS6 and earlier.
Due to updates to the text engines you might notice a text reflow - note that text won't reflow until it's interacted with.

When I upgrade to iWork '09 will I be able to open my previous .pages files

YsDa have book manuscripts that I want to be able to work on using my iPad which required iWork '09 since none of my exports from version 1.0.2 was not good enough. So I sort of went into panic mode because the DVD drive in my old PowerBook is sort of wonky and I can't upgrade my so beyond 10.4.11 and now what? But as luck would have it I found a new iWork '09 on eBay (the slightest scratch would not allow an install on my persnickety computer) and it was cheap too! It should be here in a couple of days. So now I worry..
Will I be able to open my old pages files up with the new version??? I have several completed books now up on amazon that I would love in the iBooks store, so I need to be able to open those files. And I have two unpublished manuscripts that I would die a thousand deaths over if I cannot open them ever again.
Has anyone ever run into an opening crisis following an upgrade???
M

I currently disagree with your suggestion not to write a large document in Pages. At least, so far, with my version 1.0.2! My first book was 8x10 and 440 pages long with 27 full page images. No problems there. The trilogy books are each 6x9 and the shortest is 432 with the largest 500 pages. Again, no problems. Not even with exporting to a pdf file for CreateSpace. And with the one book that was 440 pages long, there were over 100 pages of index. Then when I wanted to create a Kindle book with that index cross-referenced AND entirely clickable, there were thousandSSSSSS of links that I created in Pages. Pages being the ONLY app that could handle the sheer volume of that task. I was impressed. I'm still impressed.
My problem is that my computer...a PowerBook 13" that is was only able to have a grand total of 768 MB of RAM (I know...it's laughable...but that is the way it rolls at top speed). I tried to install more but it wouldn't accept it, being that 1000MB of RAM was it's max and the one chip was soldiered in and I couldn't get it above 768MB. So that's my world. It's limited. And yet, my old Pages and this old computer has done AMAZING things. Actually, amazing,is an understatement.
When I do write, I put placeholders when an image might need to go. The trilogy has an image as a decoration at each chapter. So there are 22 of those in each book too. I originally used low res images to hold that place, but I have one all ready to publish and it has everything in it that it needs and it opens fine.
What I would NOT do is create a gigantic color picture book. I would definitely limit my images. Not only for the sake of being able to open the file, but because it would be too expensive to publish something via CreateSpace in color.
I have tried Libre Office. I was not impressed. Same with Scrivener. Pages has been outperforming them both on all counts. So far. After I try the '09 version, I'll make another assessment of my needs vs software. And I will continue to pray that my little PowerBook will keep running (so far, so good). Even if it's only to use Pages that hasn't been dumbed down and my Photoshop, because it will be a blizzard in you-know-where before I pay Adobe for Photoshop by the month. That just will not happen.
When push does finally come to shove, I will figure out what I'll do then. I'm not even sure I would buy another Mac. There have been too many changes that I don't particularly like enough to pay so much for only to despise. I have always loved Macs because they were Artist friendly. There was so much that could be accomplished using one. They have been worth the expense just to be able to make dreams visible. But now, it seems that the power of the computer is being reduced to that of a cell phone and a tablet and that is just not going in the right direction at all. I am hoping that all changes. Soon.
I've been setting money aside for a new Mac. As the money has accumulated, the Mac's have changed. Not to be what I had wanted though. I am hoping by the time I drop the last dime in the pink piggy there will be a machine that is right for my eclectic purposes. If not, I'll spend a small portion of it on a big PC and spend the rest of it on a cruise.
Thank you all for answering my questions.
Peace.
And say a little prayer that Mac doesn't obliterate the specific needs of artists/musicians/movie makers/writers/animators/and all the others who need more than the bare bones basics to keep us happy.

Can Illustrator CC open illustrator CC (2014) files?

Can Illustrator CC open illustrator CC (2014) files? I am in a production environment where we run Snow Leopard and we can't upgrade to Illustrator CC (2014) because it requires Lion.

AiCC 2014 files will open fine in AICC. However, for the cases where any new type of content has been created with new features in AICC 2014, you might see some change.
Thanks,
Dhirendra

Open Flash CC 2014 file in Flash CS5 (was: hello)

is there anyway to open flash cc 2014 file in flash cs5 and work on the files

Flash CS5.5 lets you open any newer file. But you can save down to older versions (back to CS5) with CS6 if you have access to it. Flash CC does not give you the option to save down.

Cannot open illustartor cc 2014 files from bridge

cannot open illustartor cc 2014 files from bridge... after I installed Illustrator CC 2014 and updated Bridge CC I cannot open the Illustrator files from Bridge as it seems the path for opening such files still points to the old Illustrator CC folder which I have uninstalled from my computer

still points to the old Illustrator CC folder which I have uninstalled from my computer
Probably meaning you did not use the correct procedure for uninstall or have some remnants left of a trial. In Bridge Preferences File Type Associations you can change your default application for opening files of the wanted file types.

InDesign CS5 crashes on opening new or existing file

I am getting error message 'embedded profile mismatch' on opening existing files (CS5 and CS3) created by myself and other people. The error message appears and InDesign crashes - I have to do a forced quit. On opening a new file InDesign crashes before the file is opened. I haven't yet managed to open any file in CS5. It is an update from CS3.

The profile mismatch warning probably has nothing to do with the crash problem. That simply means that your color settings are different in the new installation.
The continuing crash may be caused by a corrupt recovery file. If there is a file in the recovery folder, remove it and ID should start.
Try exporting the CS3 files to .inx from CS3 and see if those will open succesfully in CS5.

InDesign CS4 fails to open PageMaker 6.5 files correctly

After upgrading to InDesign CS4 this week, I attempted to open a PageMaker 6.5 file. It opened, but the pages were out of sequence. PageMaker 6.5 pages 1, 2, 3, 4, 5, etc., opened in InDesign CS4 as pages 1, 3, 2, 5, 4, etc.
I purchased InDesign CS4 last week for the sole purpose of working on two books I created in PageMaker 6.5. For me, at present InDesign CS4 is useless. I hope Adobe provides a fix soon.
Also the upgrade rejected my PageMaker 6.5 serial number, I tried all the fixes at the Adobe website, finally after half an hour on the phone I was given a challenge/response code which then launched InDesign. If I need to reinstall InDesign, I'll have to go through the challenge response process again, i.e. another long wait on the support line.
I'm using OS 10.5.5 on the newest, unibody PowerBook Pro.

From the help files:
Flow text semi-automatically
With a loaded text icon, Alt-click (Windows) or Option-click (Mac OS) a page or frame.
The text flows one column at a time, as in manual flow, but the loaded text icon automatically reloads after each column is placed.
Flow text automatically
With the loaded text icon displayed, hold down Shift as you do one of the following:
Click the loaded text icon in a column to create a frame the width of that column. InDesign creates new text frames and new document pages until all text is added to the document.
Click inside a text frame that is based on a master text frame. The text autoflows into the document page frame and generates new pages as needed, using the master frames attributes. (See About masters, stacking order, and layers.)
Flow text automatically without adding pages
With a loaded text icon, hold down Shift+Alt (Windows) or Shift+Option (Mac OS).

Indesign CS4 won't open or create new files. Why???

I'm using Indesign CS4 and all of a sudden it won't open old files or creat new ones. I've restarted
my machine and program and it still won't do anything. Any ideas?

What sort of recent changes have you made on the system?
What happens when you try to open files or create new ones? What OS? IS ID patched to 6.0.6?
Have you tried trashing the prefs? See Replace Your Preferences

Why am I getting missing plugin error in CS4 Indesign when trying to open indd or PDF files?

Any help would be appreciated?

PDF files cannot be opened in InDesign.
InDesign files which are not able to be opened might come from a newer version, you might ask for an IDML file, but better to upgrade to the same version.

Indesign CS6 tries to open all my .exe files. How to fix this?

After installing a patch for Indesign CS6 all my .exe files are opening with Indesign. Now I can't even uninstall the program because it needs to open an .exe file to do so. How to fix this problem? I'm on Windows 7

The first thing I would try is System Restore

Fireworks CC Will not allow me to open/import any TIFF files

Any time I try to open or import a TIFF file I get an error - "Could not open/import the file. An internal error occured. I have tried to unistall and reinstall 2 times now and the exact same thing. I am first opening the file in LR5 then moving to PS CC for fine tuning then if I wanna add text or what not I try to move into fireworks but to no avail. Any suggestions on what I can do to correct this issue? Thanks in advance.

If you click on the "down" arrow in the Google search box and then move your cursor to the desired term in search history while still left-clicking on your mouse, and then hold the cursor over the desired search term for a couple of seconds, it works.
Clearly a bug that I hope they will fix.

Will I be able to open a Captivate 8 file in Captivate 7 without any problems?

I should say the project is not a responsive one, so it really shouldn't be that different. Just wondering if this is a good idea before attempting, thanks!
-Inna

Typically Captivate projects cannot be opened in earlier versions. It's pretty much been a one way street since inception.
Cheers... Rick

Will Adobe Premiere Pro CS6 open the .prel edit files I've made using Adobe Premiere Elements 11?

Can't find an answer to this, help would be appreciated!

I don't dispute Ann's answer, but if you have CS6, make a copy of the project and try it.

Consistently getting error on attempting to open a cc 2014 file even after just saving and closing

I keep getting the above problem. The file is not corrupted as It will eventually open after many attempts to clear cache, or registering into the CC. It can be as many as 10 times trying different combinations before it will open the project file. I keep saving as in order to produce another project file and again the same problem. Is anyone else experiencing this? Any answers to a very off putting and critical experience?
In the end to open the project I had to open a first version of the edit that opening in Premier CC which asked me to update the project file to a newer version of CC2014 which I did. Then open the most recent version of the edit at that stage instead!!!
I am very unhappy with this approach and dont know how to get this problem saved out of this edit project - amy ideas will be very gratefully recieved! I previuosly have tried saving as now in the newer verion of the software and would expect the problems to be resolved and be able to open the new version without trouble.
I am working at this time on a PC.
Should i be uninstalling the earlier premier pro cc? Just concerned this may leave me with no way of teasing open this project!!
Thanks

dannyroger
What version of Premiere Elements are you using and on what computer operating system is it running?
Premiere Elements is not part of the Creative Cloud applications.
If your program is Premiere Pro, you have posted in the wrong forum. If that is the case, please repost your thread in
the Adobe Premiere Pro Forum or wait for a moderator here to see your thread here and move it from here to there.
Premiere Pro
Looking forward to your clarification with further details.
Thanks.
ATR

Will Indesign CC (9.0) open Indesign CC (2014) files

Similar Messages

Maybe you are looking for