Will iPad support Appeture

Hi, I was about to buy a Mac Air primarily to download and save my photographs when on holiday as I fear keeping several full compact flash cards in my bag. I see that iPad allows storage of photos but not sure if it is done within iPhoto. As I use Appeture on my Mac it would be good to be able to store and manipulate my raw files on iPad if it supports Appeture?
Thanks and enjoy because over here in Europe we have another month to wait!!!
Gary

Alley_Cat wrote:
Network 23 wrote:
Drive failure is very low on the list of concerns for these devices.
Yes, but it's solid state memory NOT a physical drive per se isn't it ? - you could not easily extract and utilise this solid state memory as a 'drive' if some aspect of the iPad failed.
You're correct. It is not a drive/SSD, as you can see from the teardown. I was only using "drive" terminology because you had talked about the iPad in the same sentence as "HD" (hard drive) devices:
Alley_Cat wrote:
iPad or any HD based device - while HD based devices sound great you would be putting all eggs in one basket if the internal drive failed - when these become solid state they will be more attractive to me.
The issue you raised was easy recovery of the data. Your point is well taken that if there was a device failure, it would probably be hard to get data off of it since it appears to be chips on the motherboard. However, since we know that it's solid state, and some have observed from the teardown reveals more epoxy used than on the laptops, the iPad appears to be built for ruggedness. This would imply that the risk of failure is lower - far lower - than on non-SSD laptops and desktops, meaning the concern about getting data out of main storage is just not that big a deal really.

Similar Messages

  • When will Apple support h.264 with HE-AAC v2 (in AppleTV/Ipad) ?

    Hello
    When will Apple support h.264 with HE-AAC v2 (in AppleTV/Ipad) ?

    Maybe because iPad2 has a faster processor

  • Will apple support if my iPad broke?

       my ipad mini fall down and a small part of it broke
    it still works but it get ugly
    will apple support it or not?
    i mean the garranty 

    No. Accidental damage is not covered by the warranty. What does this have to do with ApplePay?

  • HT4623 My iPad is operating on ios 5.1.1 and will not support certain apps which I want to download.  I have checked for updates but it says that I have no updates

    My iPad is operating on iOS 5.1.1 and will not support certain apps which I want to download as they say I require at least iOS 6.  I have checked my updates and this says that I have the correct settings

    Correct, the iPad 1 can not be upgraded beyond 5.1.1.

  • Will be support on iWork of RTL for iPad ?

    Will be support on iWork of RTL for iPad ?

    Thanks Dear,
    can we direct apply 10.2.0.5 on the top of 10.2.0.1 of owb ?
    and can you share link from where we can download OWB 10g r2 server, coz need to convert our client of owb into server of owb then only need to apply patches.
    So Pl .....
    @ waiting for reply
    Regards
    Umesh

  • Will Ipad generation 1 support future ios updates, past year 2015?

    I am looking to buy an ipad gen 1 but am unsure because I hear that ipad will not support future ios updates? Thanks!

    This is a user-to-user forum. No one here is privy to Apple's development roadmap. The iPad 1 runs everything current. Eventually, like every piece of hardware, it will be too old to support current software. No one here knows when that is, though.
    Best of luck.

  • Will ipad ever support whatsapp application?

    Will ipad ever support/accept whatsapp application? And what is the reason why it is not supported currently?

    Only the Developers of the Whatsapp application can answer that.
    They are the ones that chose to not make Whatsapp available for iPad, and only they know why they did it.

  • Will The New iPad Support Java?

    Will the new iPad support Java?

    The support would come from the new Operating System rather than the hardware itself, so the question really is does iOS 4.3 support it ... and the answer is no, I'm afraid. None of the add-ins (Java, Flash, Silverlight) can be added.

  • Does Safari on iPad support SNI (Server Name Indication)

    Hi,
    I am testing name-based virtual host with apache 2.2 over SSL and noticed that this is only supported using SNI (server name indication). I have updated openSSL to include the SNI extensions on the apache but the client browser is also required to support this. I wanted to know if there is any indication as to when SNI will be supported by the Safari browser on iPad and/or if anyone else has experienced this issue.
    I know of 1 additional work around is to use wildcard certs but I am not to keen on using those unless I really have to.
    I verified that this is not support by hitting the site: https://sni.volex.ch from the iPad safari browser - it fails. However, using Opera on iPad worked.
    Thanks

    From what I understand SNI is largely reliant on client support. It is just an extension of the TLS SSL protocol. One of our Escalation Engineers wrote up a pretty good post explaining SNI.
    http://blogs.technet.com/b/applicationproxyblog/archive/2014/06/19/how-to-support-non-sni-capable-clients-with-web-application-proxy-and-ad-fs-2012-r2.aspx
    "SNI is an extension to the TLS SSL protocol that allows the client to include the Hostname the client is connecting to in the SSL Client Hello. A server can then use the SNI header to determine which certificate to serve to the client. A key benefit
    of SNI is that is allows a server to host multiple certificates on the same IP/port pair instead of needing an IP per certificate (assuming you are using port 443)."
    A few questions I would have is what client and browser combination have you attempted on this? Also, are you using a wildcard certificate on your Web Listener? Have you taken network traces to see if client is sending SNI? Ian does a good job of explaining
    how to do that in his blog post.

  • Does the iPad support flash player yet?

    Does the iPad support flash player yet?

    As has been said here many times now, Adobe has ceased development on all versions of their mobile Flash player, and since the chances are vanishingly small that Apple will ever develop their own, iOS devices will probably never natively support Flash content or apps. If Flash capability is criticial to your needs, you'll probably want to choose another device, though even Android and Windows phone and tablet devices are less and less capable of Flash support.
    Regards.

  • I cant connect to wifi but my laptop can and my other phones can.ived done all the recommendations in ipad support but still cant connect..what else shall i do?

    i cant connect to wifi but my laptop can and my other phones can.ived done all the recommendations in ipad support but still cant connect..what else shall i do?

    Some things to try first:
    1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
    2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
    3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
    4. Go into your router security settings and change from WEP to WPA with AES.
    5.  Renew IP Address: (especially if you are droping internet connection)
        •    Launch Settings app
        •    Tap on Wi-Fi
        •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
        •    In the window that opens, tap on the Renew Lease button
    6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
    http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
    ~~~~~~~~~~~~~~~~~~~~~~~~~
    Wi-Fi Fix for iOS 6
    https://discussions.apple.com/thread/4823738?tstart=240
    iOS 6 Wifi Problems/Fixes
    How To: Workaround iPad Wi-Fi Issues
    http://www.theipadfan.com/workaround-ipad-wifi-issues/
    Another Fix For iOS 6 WiFi Problems
    http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
    Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
    Fix For iOS 6 WiFi Problems?
    http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
    Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
    http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
    How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
    http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
    iOS 6 iPad 3 wi-fi "connection fix" for netgear router
    http://www.youtube.com/watch?v=XsWS4ha-dn0
    Apple's iOS 6 Wi-Fi problems
    http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
    ~~~~~~~~~~~~~~~~~~~~~~~
    How to Boost Your Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h tm
    Troubleshooting a Weak Wi-Fi Signal
    http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
    How to Fix a Poor Wi-Fi Signal on Your iPad
    http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
    iOS Troubleshooting Wi-Fi networks and connections  http://support.apple.com/kb/TS1398
    iPad: Issues connecting to Wi-Fi networks  http://support.apple.com/kb/ts3304
    WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
    How to Fix: My iPad Won't Connect to WiFi
    http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
    iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
    iOS: Recommended settings for Wi-Fi routers and access points  http://support.apple.com/kb/HT4199
    How to Quickly Fix iPad 3 Wi-Fi Reception Problems
    http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
    iPad Wi-Fi Problems: Comprehensive List of Fixes
    http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
    Connect iPad to Wi-Fi (with troubleshooting info)
    http://thehowto.wikidot.com/wifi-connect-ipad
    Fix iPad Wifi Connection and Signal Issues  http://www.youtube.com/watch?v=uwWtIG5jUxE
    Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
    How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
    Unable to Connect After iOS Update - saw this solution on another post.
    https://discussions.apple.com/thread/4010130
    Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
    ~~~~~~~~~~~~~~~
    If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
     Cheers, Tom

  • Keep getting "loading/waiting" message when I try to download or update anything on my iPad.  I have tried signing out and in.  Turning iPad off and on, left it off overnight, and spoken with iPad support, nothing.  Any help out there?

    Keep getting a "loading/waiting" message when I try to download/update anything.  Sometimes something will download.  I have signed out and turned the thing off and back on, signed in and no help.  I have did the sleep button and home button thing, no help.  I have talked to iPad support and so far, no help.  Any ideas out there?

    If there are multiple apps trying to download at once, only one can download at a time and the rest say "Waiting" until it is then their turn. Try this. Double tap the icon of the Waiting app, and it should resume the download.
    If that doesn't work:
    •  Log out of your iTunes store account.  Go to Settings > Store > Sign Out Then press the Home button.
    • Then press and hold the Home and Sleep buttons simultaneously and don't release them when it brings up the Turn Off screen; keep holding them until the Apple logo appears.
    • After restart, the Waiting should be gone.
     Cheers, Tom

  • When will Apple Support Ultraviolet Digital Copies?

    This is something of a cross post for iPad & iPhone, but I won't be cross posting it as they can be a bit annoying.
    I'm a huge fan of digital copies, wasn't once, but now am.  Having digital copies is something that does factor into me deciding when to buy a film on Blu-Ray and when to wait. 
    The new thing that is being pushed now is Ultraviolet, a quasi-cloud type service, for digital copies.  However it can only be used by a select few devices; Mac (and even Windows) don't support it.  Personally I prefer the standard digital copy, I maintain my library, back it up when I make new purchases and save my recipets in case anything happens.  And of course a big reason I prefer it is because I won't be hopping between two services for them.
    My question is when will Apple support Ultraviolet Digital Copies?  Or will there be an alternative where the Blu-Ray will include a code for a traditional digital copy that if used will void the UV copy and vice-versa?
    I would personally prefer an alternative as I'd hate managing two accounts to handle my digital copies.

    This is a user to user forum so we have no more information than what Apple publishes. Also please read the Terms of Use of this forum. Specifically where it says:
    SubmissionsStay on topic. Apple Support Communities is here to help people use Apple products and technologies more effectively. Unless otherwise noted, do not add Submissions about nontechnical topics, including:
    Speculations or rumors about unannounced products.
    Discussions of Apple policies or procedures or speculation on Apple decisions.

  • TMS Scheduler iPad support

    We have TMS and TMSXE up and running and when ever we book a resource (SX20) it will show the scheduled conference on TV that SX20 is hooked up to.  
    Basically it just shows time and date for when this resource will be used and the duration.  I wanted to know is there any kind of iPad support for this so I can have this same thing show up on iPad?
    Thanks

    Nothing that I know of.  You can use a Touch 8 or Touch 10 and have it appear on that, but that would be linked to the codec in the room, not a mobile solution though.  They could open the Smart Scheduler in TMS, which is mobile friendly, though that will show all conferences the user has scheduled and they would have to go into the specific conference to see the details.

  • How much RAM will Ipad Air have?

    How much RAM will Ipad Air have and will it be sufficent?

    Jason899 wrote:
    Its just apple tend to give their devices the minimum RAM they can as a sort of a limiting factor, ive had my Ipod touch 4 for 3 years now and its virtually useless now because of the lack of RAM they put in them and i dont want to be paying over 600 pound for something thats not going to run good apps after two years because theres not enough RAM.
    Well, any mobile computing device you buy is technically obsolete within a year or less of being released - for any company's products that's true.  And with all of these all-solid state devices, you cannot update the RAM or the storage, so they basically remain useable and supported as long as they do - there really is nothing you can do to avoid that sort of situation.  Smart phones and tablets are evovling at an almost frenetic pace, so nothing in that arena is going to be compatible with the operating systems and apps of newer future devices for very long.
    You can maintain your own device's usability for longer by making sure to keep backups of apps & versions of apps that you know do run on your device so you will not be left behind if an App store update drops support for your device and removes the older app version.
    And as far as iOS devices, I don't agree that Apple only installs the minimum RAM.  The amount of RAM is going to be based on a number of factors - the capability of the mobile cpu being used, the footprint of iOS and the built in functions, the typical RAM usage of known iOS 3rd party apps, the size of battery(s) available to fit in the space available, the added cost of additional RAM and any number of additional parameters.  In a device like a tablet or smart phone, every single component that goes into them involves some trade off or compromise.

Maybe you are looking for

  • SAP is not coming up after system refresh with Export/Import option

    Hi, I have exported Java 6.40 and finished the refresh successfully. And I imported the Java successfully. After importing Java, I restarted SAP but is not coming up. When I checked the dev_w0 trace file, I got the following information. trc file: "d

  • Cell background colors are not showing in preview - help? - DW4

    Hi, I created a horizontal table for my menu bar, and gave each cell a different color by creating a separate class for each with background image - image is a block of color created in Photoshop. In design mode they look they way I want, but in prev

  • Re: MBean calling ejb class loading issue

    Must think before typing.. If I have the ejb register a listener on the mbean and have the mbean emit an event the detyped notification from the mbean will break the link between the mbean class loader and the ejb loader. I think ;-) Ill try it. Pete

  • Restrict to access Outlook Exchange Email Thru GPO time based

    Dear All, Need to restrict access to Emails (outlook) for certain users in the Group by time base. I hope this is not possible but its better idea MSFT consider using GPO time base Regards RASA RaSa

  • Looping video in a MovieClip

    I have a imported video converted to MovieClip, so that I am able to make mouse events, dragging etc to it. The problem is that i want it to loop forever. Regular FLVplayback codes doesn't anymore work after converting to MovieClip. I also tried to m