Will Iphone change to daylight savings?

I have to go to work tomorrow at 7 am... and I am not sure if my Iphone will automatically adjust to daylight savings... can any of you help? Iphone 3G here with AT&T obviously (in USA)

bowlerboy-
Yep, and I'm surprised nobody else I've talked to had that problem. I actually overslept by an hour this morning because the phone kicked itself back like that. I'd turned off the automatic date/time setting and rolled it back an hour myself, not trusting that it'd get the signal properly. Well, at 2am it set itself back automatically an additional hour. I was pretty late to work as a result. (As a side note, I also had a second alarm clock set, but it did the same thing my iPhone did...automatically set itself back an additional hour at 2am after I'd rolled it back myself before bed! D'oh!)
So...I guess turning off the automatic date/time setting doesn't really get rid of all the automation. I think it must be a calendar setting.

Similar Messages

  • My iphone 4 has changed to daylight savings.  I do not live in an area with daylight savings?  How do i keep the phone on automatic with the correct time?

    My iphone 4 has changed to daylight savings.  I do not live in an area with daylight savings?  How do i keep the phone on automatic with the correct time?

    I have the same issue. I live in Arizona and we also don't do that stupid daylight savings. When I put it to auto it says Denver. Location should pick up Phoenix. Needs to get fixed because I have to manually set it every time I travel now until DST is over.

  • Saskatchewan does not change to daylight savings time

    Saskatchewan does not change to daylight savings time but my calendar on my iPhone 5s changed and my iMac stayed the same and the iMac time is the correct one

    Automatically changing the date and time when set to automatically is carrier dependent since that is acquired by the cell tower the iPhone is connected with.

  • Phone didn't change for daylight savings

    my droid 4 did not change to daylights savings time last night, and I was very late, and what is up with that?  this has never happened before.  It finally changed at about 10 AM, as I was sending a text.  all settings on the phone are correct for automatic time changes.   has this happened to anyone else today?

        Hello Sciaccajan
    I'm sorry you were late! The issue you experienced was very odd. It may have been a delayed signal or an application that interfered. Please power down the device remove and reinsert the Sim card and retest. This will force the device to see all the towers.
    JoeL_VZW
    Follow us on Twitter @VZWSupport

  • Time didn't change to daylight savings on my computer

    My computer didn't automatically change to daylight savings as in previous years; never received any software update either - I am checked off for Apple network under Preferences. My computer has OSX 10.2 - is that the problem? Thanks, Tyner

    Hi Tyner;
    Is there are reason why you have not upgrade to new versions of OS X?
    Allan

  • Do iPhones adjust for daylight savings time?

    do iPhones adjust for daylight savings time?

    thumpus,
    Yes thy are capable of adjusting...just make sure that you have Settings>General>Date & Time> "Set Automatically" selected.

  • Reminder times change with daylight savings time

    How can I prevent my reminders from changing with daylight savings? I want the times to remain static throughout the year.

    Michael,
    I never have changed time zones. Are you suggesting I should have time zone support enabled ?
    I just tried turning on Time Zone Support, then restoring my calendar using Time machine. No change here.
    As I mentioned earlier, this same problem occurred in the fall (although I don't remember which way the event times moved), this time they moved forward. At the Fall change I was using a Mac G4, which I used as a target to build this machine. The only thing I can think of that makes me unique (although I'm not in that small of a group) is that I have altered one of the files in iSync to allow iSync to sync calendar events with iCal. The syncing has always worked OK.
    Right now I'm leary of attempting to do anything with iSync. I'm also finding it difficult to believe I'm not one of 10,000 people experiencing the same problem, but I don't see any other posts.
    I found a time zone in south america which returns my times to the correct figure, with time zone support enabled, but that looks like a deeper hole to dig out of.
    Still stuck,
    Bill

  • Will my phone automatically change for daylight savings 2014?

    I have to be at work tomorrow at 7. Will my phone automatically change over for daylight savings 2014?

    kdsmini,
    Sure...just make sure that you have Settings>General>Date & Time> "Set Automatically" selected.

  • IdM Scheduler and Time Change to Daylight Savings Time GMT to BST

    This isn't really a 'question' , but just a topic for discussion.
    We're not live yet, but will be by the time the clocks go back. So I'm just interest to hear everyone's experiences and any issues with regards to the switching to / from DST
    I did some "interesting" (or not) tests last night to see what happens with Pending Values which are due to take effect at the time change threshold of 01:00 GMT when switching to Daylight Savings Time (BST) GMT +0100.
    It seems as if the IdM scheduler keeps going according to UTC or GMT. However any values provisioned to target systems or to local tables using the ddm.datetime8601 system variable are in local time according to the runtime server or SQL server's locale settings.
    I set up a task to output from a javascript the current system date
    using the following in the functions.
    currentTime = new Date();
    return currentTime.toString(); // returns Locale Time String
    currentTime = new Date();
    return currentTime.toUTCString(); // returns UTC Time String
    in the same pass I also output the ddm.datetime8601 system parameter and the ddm.time24 system parameter.
    This task was to update a comment on an entry and Scheduled to run at 00:00:00 and was executed at 00:00:06 GMT all times were still in GMT as expected.
    Local Time: Sun Mar 27 00:00:06 GMT-0000 (GMT) 2011, UTC Time: Sun, 27 Mar 2011 00:00:06 GMT, ddm.datetime8601: 2011-03-27T00:00:06, ddm.time24: 00:00:06
    This task was scheduled at 01:00:00 in IdM and was exectued at 01:00:08 GMT by the runtime, and you can see the local time is being correctly reported as 02:00:08 BST. Note also the ddmdatetime8061 is also 02:00:08 i.e. BST.
    Local Time: Sun Mar 27 02:00:08 GMT+0100 (BST) 2011, UTC Time: Sun, 27 Mar 2011 01:00:08 GMT, ddm.datetime8601: 2011-03-27T02:00:08, ddm.time24: 02:00:08
    In the database the entry values MXI_VALUES ModifyTime field has the GMT / UTC timestamp.
    I also set up some pending value objects to be applied at 00:59:59 and 01:30:00 to see if the 01:30:00 would be 'skipped' as the locl clock change would've gone from 00:59:59 to 02:00:00. Well the pending values were correctly applied and expired and no 'lost' transactions happened as a result of the change.
    So essentially it seems to me that the IdM runtime and scheduler times are all based on UTC / GMT.
    I guess it's only an issue twice a year if you're expecting something to happen at a specific local time 01:00:00 or if you've got a global user base and their account expiry should be in each user's own country's local time. In these cases, it would seem that you'd need to convert the schedule times and pending value times to UTC first before setting them in the database.
    Has anyone else had any issues, thoughts, questions or suggestioins on scheduling tasks which span the DST time change when switching to and from Daylight Savings Time.
    Edited by: Paul Abrahamson on Mar 27, 2011 10:51 AM

    Read here:
    http://www.appleinsider.com/articles/10/10/11/applesays_ios_software_update_to_fix_pesky_alarm_clockbug.html

  • Time change for daylight savings and Alarms not working correctly

    we have 3 iPhones in our house. 2 were set to auto time change for daylight saving and one wasn't. 1 did the auto time change with out an issue and all alarms worked ok. The other 2 have had issues with not been able to set the alarms ie set alarm for 0630 and it goes off at 0530 even though the time is set correctly. The 1 that was set to autotime worked fine until I switch auto time off, now the alarms on this one wont work either. well they work but just at the wrong time. The 3rd phone will allow alarms to be set, but the alarm will go off an hour earlier and this phone will not allow the alarm to be set for 0630 at all.
    Has anyone had this issue and resolved it. It makes getting up for shift work a right pain..

    Read here:
    http://www.appleinsider.com/articles/10/10/11/applesays_ios_software_update_to_fix_pesky_alarm_clockbug.html

  • All Event times change with Daylight Savings time

    With the time change associated with daylight savings time (March 8 2008) all my event times were changed by one hour. EG: events that were 8:45 am are now 7:45 am. I have tried using Time machine to restore to pre March 8 status,but an adjustment takes place and the events remain 1 hour ahead. I have looked through the discussions pages and don't even see the issue identified. I have looked through the menu and preference items and find nothing to help.
    I am surprised not to find this a front page topic today, March 9 2008.
    Can anyone offer some help ?
    Bill Mullen

    Michael,
    I never have changed time zones. Are you suggesting I should have time zone support enabled ?
    I just tried turning on Time Zone Support, then restoring my calendar using Time machine. No change here.
    As I mentioned earlier, this same problem occurred in the fall (although I don't remember which way the event times moved), this time they moved forward. At the Fall change I was using a Mac G4, which I used as a target to build this machine. The only thing I can think of that makes me unique (although I'm not in that small of a group) is that I have altered one of the files in iSync to allow iSync to sync calendar events with iCal. The syncing has always worked OK.
    Right now I'm leary of attempting to do anything with iSync. I'm also finding it difficult to believe I'm not one of 10,000 people experiencing the same problem, but I don't see any other posts.
    I found a time zone in south america which returns my times to the correct figure, with time zone support enabled, but that looks like a deeper hole to dig out of.
    Still stuck,
    Bill

  • Macbook not changing for daylight savings

    Um, yeah, so my macbook says it's 10 when really it's 9. I thought it would eventually change, but it's been about two weeks since daylight savings. I have no idea how to fix it. Please help!

    Do you have ALL CF Server updates/hotfixes applied?  I don't _know_ that any CF updates included the new rules for DST changing; but that's the first thing I'd check, if it were my system.
    What web server are you using?  Built-in, Apache, IIS?  Could there be a setting in there that might affect the DST difference?
    Just off the top of my head.
    ^_^

  • ICal times changed with change from Daylight savings time

    My times on iCal on my G5 are correct. I transferred them to my iPod through iTunes. But when I changed the time from Daylight savings time Sat, my times on my iPod's iCal all moved an hour earlier. However, an event that I added today has the correct time. Besides having my iPod clock set for the wrong time, how do I correct the times in my iCal?

    I now have a follow-up problem. Almost everything is right in my iPod calendar as I deleted and then manually added repeated events for Mon, Tue, Thurs, Fri, Sat, and Sun. into my G5 iCal. Mondays, Wednesdays, Thursdays, Fridays, Saturdays, and Sundays are correct in the iPod. However, my Tuesdays show both my Monday AND Tuesday events. Have you run into that problem?

  • IPhone 6 Plus Daylight Savings Time Problem

    My recent upgrade from iPhone 5 to iPhone 6 Plus has been generally positive, but today the phone outsmarted me.
    The phone seemed to be correctly reset to daylight savings time for most of the day.
    Around 6PM I set an alarm for 8PM to remind me to wake my sister from a nap.
    A while later the alarm goes off. It didn't seem like two hours. I called my sister and said it was eight,
    but alas it was only 7PM.
    I went into the alarm settings and sure enough the alarm was still set for 8PM.
    My Mac Pro says it is 7PM, and the MacBook says so also.
    I am on the central coast of California, in Santa Maria. My provider is Sprint.
    My very expensive smart phone seems confused about the time. :-(
    Thoughts?

    The alarm issue is a known problem and apparently Apple plans on fixing it with iOS 4.2. Here's a link to news items about the alarm issue.
    http://www.google.ca/search?q=applealarmissue&hl=en&client=firefox-a&hs=M4Z&rls=org.mozilla:en-US:official&prmd=nfd&sour ce=univ&tbs=nws:1&tbo=u&ei=jqLZTMLiOITWtQPt2pi3Bw&sa=X&oi=news_group&ct=title&re snum=1&ved=0CCIQqAIwAA

  • Event times changed when daylight savings time changed - that's just wrong!

    My events that were scheduled for certain times all were changed one hour back, when DST changed. Why should that happen? An event that is scheduled for 8:15 should still be 8:15, however, it automatically got moved to 7:15, as did all my other scheduled events.
    Is this happening to anyone else?

    Well if you are syncing they should both be set the same way. Try turning it on on the Mac and see if the events go back to their correct times.
    AK

Maybe you are looking for

  • How can i start my java application using double-click in WindowsXP?

    i hava developed an editor in java. The file made by this editor is saved as the .cte format. so, I need to associate this file with the editor, which means that when you double click the .cte file ,this file will be opened in the editor just like th

  • Error While Importing MIF File

    Product: Unstructured FrameMaker version 7.0p579<br /><br />I'm learning MIF and need to create MIF files that contain tables. As a base, I'm using the table.mif file that is in the samples\mif directory in the Frame installation folder.<br /><br />I

  • Certain 3D Operations Very Slow on 16 Bit Images

    I haven't had Photoshop Extended before CS6, so I've been experimenting with doing some simple 3D stuff, such as turning text into 3D shapes and trying to match it to a photographic background. What I'm doing seems quite simple, and it seems to be wo

  • Creating less scenes

    I believe I need to merge clips so that when I import to iDVD I can create a movie with less scenes. The problem is each clip, approx. 55 - 60 will import as 1 scene in iDVD. The problem 4 clips might be the same thing. So for example My daughter is

  • Can we create new tablespace in Oracle Database 10g Express Edition?

    Hi, Can we create new tablespace in Oracle Database 10g Express Edition instead of using the default "users" tablespace provided? Please advise. Thank you.