Will iphone dock with viewsonic viewdock monitor?

Hi,
Will the iPhone dock with:
22" Viewsonic VX2245WM monitor.
It is described as "made for iPod"
Anyone tried?
Thanks

Firstly, the iPhone likes USB 2.0 and not the older 1.1 standard. So if your Viewsonic's hub is 1.1 you will have problems with Sync. Secondly, your iPhone will like everything best if it's plugged directly into your computer's USB port. It may work with USB 2.0 powered hubs but it will work best when you don't go through a hub.
Frankly, I'd plug your keyboard and mouse into your Viewsonic and see if that works. That's the best use for that hub as your keyboard and mouse need to be near your monitor. And I had my iPhone blow out my USB 1.1 powered hub and my Mac, shortly thereafter, told me that there wasn't enough power going through my USB system to power something attached to it.
So plugging your iPhone into your monitor might fry the USB electronics in your monitor, making it useless as a hub.
Not recommended. Plug your iPhone into your computer's USB port or into a USB-connected power supply for charging (and not syncing).

Similar Messages

  • IPhone dock with a message or notification front led

    Hello there,
    is there a chance to get the iPhone dock with a message led in front to signalize whether there are unread messages and mails, lost calls or any other notification, e.g. low battery? All docks I found so far are non-communicative as well as the iPhone case itself is. I don't mean a notification for incoming calls like the flashing camera led, i think about a docked iPhone standing on the desk with switched off display and you can see whether it is useful to unlock the iPhone to check for mails or calls or even not by a single led in front that tells you about.
    I hope there is no patent pending for other manufacturers so it would be great if Apple would enhance the docks with that tiny useful feature. And if I have a wish, don't make it only for iPhone 6, provide it for all iOS 7 capable iPhones.
    Sincerely
    Alex

    This is a user-to-user forum. If you wish to offer a suggestion to Apple, you can do so here: http://www.apple.com/feedback/
    However, past history would indicate that this isn't something Apple would be at all interested in. It would be left to third party accessory developers.

  • Will iPhone work with USB 1 ?

    My brother has an iMac 700Mhz G4 flat panel.
    OS is up to date as is iTunes etc. Other than slower data transfer, will the iPhone function with iTunes?

    D you have the Aluminum PB? that has USB 2 but I think you need to make sure the OS is 10.4.10 and latest version of iTunes.
    However if your PB is an early one with USB 1 then I think (from what I've researched) that it's a slim chance it will work.

  • Will iphone sync with stickies on mac

    Will the iPhone sync with stickies on the mac? If not, is there an app that has a comprable mac app where this can be done. I have been using a blackberry for some time now and use the Notes feature of MS Outlook. I am switching to an iPhone soon and want to retain this or a comprable capability.
    Thanks. Brad.

    Stickies cannot be synced with an iPhone.
    On a Mac, the Mail application has a notes feature. These notes can be synced with an iPhone - using iTunes.
    Mobile Me users can sync via the *cloud*.
    The Mac version of Outlook has a more involved setup - which sometimes causes problems. Notes must first be synced to Mail and then to the iPhone.
    The Windows version of Outlook might allow for the syncing of notes. I can't say for sure.

  • Will iPhone work with the iPad kb in ios4?

    Can anyone confirm whether the new os4 enables the use
    of the kb dock with the iphone 3GS?
    I would find that very useful indeed!
    Regards

    From footnote 1 on this page: http://www.apple.com/ipodtouch/ios4-software-update.html
    Not all features are compatible with all devices. For example, multitasking, custom wallpaper, and Bluetooth keyboard support are available only with iPhone 4, _iPhone 3GS_, and the third-generation iPod touch (32GB and 64GB models from late 2009).

  • Will iPhone work with Now Contact?

    I am thinking of buying an iPhone. Will it work with Now Contact? How will i sync? Currently using MissingSync. I have 1400 contacts in my Palm Treo 680 and I rely on it. Any thoughts or experiences? The mapping feature of the iPhone is intriguing as I travel 7 states.

    You're looking at this backward. The real questions are:
    • will Now Contact and Now Up-to-Date work with the Sync Services framework?
    • will the soon to be released NightHawk replacement program work with this framework?
    The answer to the first question is no, while the answer to the second is yes. Users of version 5 of NUTD or Contact will be able to update to NightHawk for $ 69.95 directly through Now Software.
    You will be able to synchronize using the existing Mac OS X 10.4 or later framework using iTunes via USB, or cross-grade from the Missing Sync for Palm OS to the soon to be released Missing Sync for iPhone, which includes a migration assistant specifically designed to move contact, event and task data from a Palm device to the iPhone, and extends support for call logging, SMS transfers and the synchronization of notes.

  • Will iphone work with OS 10.3.9 and a standard USB

    I have an old Titanium G4 power book using OS 10.3.9. and standard USB port, has anyone been able to connect thier iphone with a similar system?
    I saw on apple's site that you need OS 10.4.10 and a usb2, but I see some users have older computers with older OS. Will the iphone work with an older system?
    I want an iphone with out buying a new computer.
    Thanks

    Hey 111wonderer,
    The iPhone does require Mac OS 10.4.10
    http://docs.info.apple.com/article.html?artnum=305703
    USB2 is required but the USB hardware is forward compatible from USB 1 to 2. The syncing will be much slower with USB 1 though.
    Jason

  • Are sound controls not compatible with viewsonic 2703 monitor?

    my mac mini is connected to a viewsonic 2703 monitor via hdmi. the sound controls in the menu bar are greyed out. Is volume control not compatible?

    Audio MIDI is in the Utlities folder.....see if you can select the monitor there for audio output.....
    click on the monitor (if it shows there) and from the bottom of the window click the icon next to the "+" and the "-" sign......choose (Use this device for sound output).....

  • Updating to 11.1.4 iTunes on an iPhone 4 with iOS 7. Will iPhone 5 with iOS 6.1.4 still be able to use it?

    I just got an iPhone 4, but I updated to iOS 7. I need to edit the music on it, so I tried to sync it to my Windows laptop iTunes. It doesn't use the older version that is still on my laptop. My mom's iPhone 5 has iOS 6.1.4. If I update the iTunes on my laptop to the newest version, will her iPhone continue to be able to use the newer iTunes without upgrading to iOS 7?
    Thanks~

    Updating iTunes does not remove compatibility with any version of iOS.

  • Will iPhone 5S with T-mobile work in India ? not sure if this is unlocked

    When I buy the iPhone 5S, it dostn't show whether it is unlocked or not.
    My Q is will that work in India with GSM carrier(or is it unlocked )?

    jaseeb shajahan wrote:
    i bought a facotry unlocked i5s  from at&t . now i cant use it in india . and sim is not reading .
    That is not possible. there is no such thing as a factory unlocked phone from AT&T. All AT&T Phones are by definition locked to AT&T.  The only way to get around this is to ask AT&T to unlock it. But you need to have been paying customer at some point.
    AT&T wrote:
    General eligibility requirements for unlocking all AT&T wireless devices
    You must meet the following requirements to unlock an AT&T wireless device:
    The person requesting the unlock code must be one of the following:
    A current AT&T customer
    A former AT&T customer who can provide the phone number or account number for the account
    Your device was designed for use on AT&T's network.
    Your device must be paid for in full.
    Your device wasn't reported lost or stolen.
    You're allowed the following number of device unlocks:
    Current customers are allowed up to five device unlocks per account, per year.
    Former customers are allowed a total of five device unlocks per former account.
    http://www.att.com/esupport/article.jsp?sid=KB414532&cv=820#fbid=9ULttOOQ8SD

  • I am interested in purchasing an apple product that will be compatible with a heart monitor that I would like to use for workout purposes.  Does the Nano have that capability?

    Is a heart rate monitor compatible with a nano?

    And for latest 7G Nano, Bluetooth 4.0 Heart Rate Monitor will work for Nike+
    The Runalyzer Blue available on Amazon for 69€ / 74$
    And the Wahoo Blue HR on Amazon for 76€ / 79.79$
    Djailla - http://blog.djailla.com

  • Upgrading from OS X 10.3.9 with a PC monitor

    I have a Mac mini with a big old PC monitor. I need to upgrade to OS X 10.4 to run Quark Xpress 7, but I am concerned that it will only run with an Apple monitor? The tecnical specs suggest I need: 'A built-in display or a display connected to an Apple-supplied video card supported by your computer'. I don't know if this refers to a card in the Mac or in the monitor. If its in the mac then I would be OK. Can anyone help?

    The Apple supplied video card would be the one inside the Mac Mini. If your monitor has been working with that video card it will continue to work with 10.4.

  • If I connect my ipohone 5 to an iphone 4 dock with the apple adapte will it still stably on the adapter with no back support?

    If I connect my ipohone 5 to an iphone 4 dock with the apple adapte will it still stably on the adapter with no back support?

    I use an iPhone 4 dock but have super glued a piece of (elegant) plastic to support
    the iP5 .  It  will wave around in wind a bit without support putting strain on the
    .lightning socket
    I have also adapted an iPad dock which does have a lip at rear

  • IPod video dock with iPhone 3GS

    Hi guys,
    New iPhone user and OMG what have i been missing!! Loving it. Quick question, I am using the iPhone in my iPod dock and I get a message on my iPhone "Not supported Blah Blah" but the phone is charging and I can transfer, make calls etc. Is it ok for me to contiue using it or should I get the proper iPhone dock? How long does it take for the iPhone to charge fully from empty?
    Thanks

    if its charging it you can use it...
    apple has a standard for connectors, docks, etc that lets the connection tell the iphone/touch what it can and can't do.
    if you havent noticed yet iphones use GSM technology for the phone to work... GSM has a habit of introducing radio frequency interference (RFI) that is just at the perfect wavelength to cause speakers to chirp...
    usually when you get the warning about not designed for iphone it is because the company who designed the product (dock, clock radio, stereo, etc) has not designed it to shield itself from that RFI.. which will cause annoying chirps on the speakers or the stereo etc... the message usually offers to put the phone into airplane mode which will also stop RFI from happening (since the phone function will be off).
    if you don't mind your phone laying on the table just use the usb cable that came with it!

  • Will iPhone cable work with iPod classic?

    Will the combination iPhone/BT headset cable that came with my iPhone also charge my iPod classic?

    The cable that came with the iPhone should charge any iPod with a 30 pin connection. I charge my nano with the iPhone dock/cable.

Maybe you are looking for

  • URGENT: REGARDING POSTING DATE AND DELETION OF ZEROS IN ALV REPORT

    Hi,   I had made a report in which i have to display 'POSTING DATE' (iseg-budat) when we execute the report i.e. it should be displayed as  PERIOD :- _______  to _______ . 2nd problem is i had displayed the material no. ,but there are zeros which are

  • Subject: Timing issues in LabVIEW 6.0

    Hi all! I am running LabVIEW 6.0 on Win 2k Professional and am baffled by the following: Using the GPIB Read .vi, I read from a couple of virtually identical Solartron/Schlumberger 7150 Digital Multimeters at a set time intervall and subsequently wri

  • How can I get my materials back into EBP 5.5?

    I have executed an initial replication of a single material into a clean EBP 5.5 (SRM 5.0) , i.e. no product master has ever existed After changing MATERIAL filters in R3AC1 and afterwards replicating using R3AS I managed to get more materials into t

  • One performance view for two classes, possible?

    Hi there, My system is still running 2007 R2. I am writing a MP now which contains two classes. There are few performance collection rules targeting those two classes. I want to create one performance view to display performance data for BOTH classes

  • Default profile not working when home directory on Windows server.

    Hi, Using 10.6.4. I have created a default profile (stored in /System/Library/User Template/English.lproj) and this works fine for new local users. If I bind to AD (Using UNC path from Active Directory to derive network home location) and login as an