Will isync work with a blackberry (bluetooth device)

wondering if the isync will work with a blackberry that has a bluetooth device to transfer a word document from my powerbook G4 to the blackberry? I am also using OS Tiger...

Pocketmac does not support syncing via Bluetooth.
It also does not support file transfer. Blackberry devices do not have this functionality.
Your solution does not address the problem faced by the OP.
"if the isync will work with a blackberry that has a bluetooth device to transfer a word document from my powerbook G4 to the blackberry?"

Similar Messages

Warning: Z3c doesn't seem to work with many common bluetooth devices. No fix immenent?

Hello. I just bought the Z3c as a replacement for the far-too-large Samsung Galaxy S5.
However, unlike the Samsung phone, the Sony fails to detect almost all bluetooth devices I've tried. In particular it fails to connect with my Jaybird Bluebuds X sports headphones, and a Bose speaker dock, both of which use an older bluetooth implementation.
I believe this is a Bluetooth stack issue with Sony's 4.0 implementation, though please correct me if i'm wrong,
Sony, any plans to fix this? Please address this for new or would-be buyers, many of whom have existing bluetooth devices and quite reasonably expect to use them when buying your smartphones.

You might have a defective device or it needs a software repair because all I use for my music needs is Bluetooth and I regularly use the following without any issue:
- Plantronics BackBeat Go2 (headphones)
- Altec Lansing InMotion SoundBlade (portable speakers)
- Bose SoundDock 10 (home speakers)
- Sony XSP-N1BT (car stereo)
- Sony MEX-BT2500 (car stereo)
Additionally I have paired and tested the following devices:
- Logitech K810 Bluetooth Keyboard
- ASUS U47A (notebook)
- a chinese Monopod (selfie stick with bluetooth)
And the Z3C has been flawless so far regarding bluetooth connections... not even one dropout. My older Acro S used to have an issue that prevents the BT from turning on, and the switch inside settings would become grayed out until a reboot.

How will Reflow work with higher resolution mobile devices?

If the media queries are based on a resolution breakpoint, how will we be able to specify a mobile css design for new mobile devices with such high pixel density displays?

I haven't found a workaround for device pixel ratio but I have found that creating my sprite at double res and oversizing my images helps greatly with sharpness on hi-dpi displays. Reflow does allow for CSS3 background sizing which is great for resizing a single sprited item across breakpoints.
SVG would be even better but OSX Mavericks has made illustrator unusable for the time being, so I'm using raster-only sprites.

Is BlackBerry HS300 Bluetooth Headset universal? Will that or any other Blackberry bluetooth work with Samsung?

Is BlackBerry HS300 Bluetooth Headset universal? Will that or any other Blackberry bluetooth work with Samsung?
Solved!
Go to Solution.

it should pair with it, there might be some advanced features that wont work but the basic ones should be fine.
i used an HS 500 on a samsung A 358 ( i think it was the model) and it worked very well for calls.
Click here to Backup the data on your BlackBerry Device! It's important, and FREE!
Click "Accept as Solution" if your problem is solved. To give thanks, click thumbs up
Click to search the Knowledge Base at BTSC and click to Read The Fabulous Manuals
BESAdmin's, please make a signature with your BES environment info.
SIM Free BlackBerry Unlocking FAQ
Follow me on Twitter @knottyrope
Want to thank me? Buy my KnottyRope App here
BES 12 and BES 5.0.4 with Exchange 2010 and SQL 2012 Hyper V

HT204368 bluetooth stopped working and now will not pair with any of my devices ?

bluetooth stoped working and now will not pair with any of my devices? any suggestions?

Hello, oscar302.
Thank you for visiting Apple Support Communities.
Here is an article that you may find helpful with this issue.
iOS: How to troubleshoot Bluetooth connections
http://support.apple.com/kb/TS4562
Cheers,
Jason H.

My iPad Mini with retina display suddenly will not connect to the Internet. It shows full wifi bars, yet no web pages will load. My Internet is working with all other apple devices in my house. The iPad also no longer works with celluar data.

My iPad Mini with retina display suddenly will not connect to the Internet. It shows full wifi bars, yet no web pages will load. My Internet is working with all other apple devices in my house. The iPad also no longer works with celluar data. I'm not sure what has happened. It was working fine a few hours ago. I have tried resetting it, ive restarted my browser etc. I tried to erase all data from my Ipad but I can't do that because it needs to sign into my Apple ID and use the Internet!

Some things to try first:
1. Turn Off your iPad. Then turn Off (disconnect power cord for 30 seconds or longer) the wireless router & then back On. Now boot your iPad. Hopefully it will see the WiFi.
2. Go to Settings>Wi-Fi and turn Off. Then while at Settings>Wi-Fi, turn back On and chose a Network.
3. Change the channel on your wireless router (Auto or Channel 6 is best). Instructions at http://macintoshhowto.com/advanced/how-to-get-a-good-range-on-your-wireless-netw ork.html
4. Go into your router security settings and change from WEP to WPA with AES.
5. Renew IP Address: (especially if you are drooping internet connection)
    •    Launch Settings app
    •    Tap on Wi-Fi
    •    Tap on the blue arrow of the Wi-Fi network that you connect to from the list
    •    In the window that opens, tap on the Renew Lease button
6. Potential Quick Fixes When Your iPad Won’t Connect to Your Wifi Network
http://ipadinsight.com/ipad-tips-tricks/potential-quick-fixes-when-your-ipad-won t-connect-to-your-wifi-network/
~~~~~~~~~~~~~~~~~~~~~~~~~
Fix WiFi Issue for iOS 7
http://ipadnerds.com/fix-wifi-issue-ios-7/
iOS 6 Wifi Problems/Fixes
Wi-Fi Fix for iOS 6
https://discussions.apple.com/thread/4823738?tstart=240
How To: Workaround iPad Wi-Fi Issues
http://www.theipadfan.com/workaround-ipad-wifi-issues/
Another Fix For iOS 6 WiFi Problems
http://tabletcrunch.com/2012/10/27/fix-ios-6-wifi-problems-ssid/
Wifi Doesn't Connect After Waking From Sleep - Sometimes increasing screen brightness prevents the failure to reconnect after waking from sleep. According to Apple, “If brightness is at lowest level, increase it by moving the slider to the right and set auto brightness to off.”
Fix For iOS 6 WiFi Problems?
http://tabletcrunch.com/2012/09/27/fix-ios-6-wifi-problems/
Did iOS 6 Screw Your Wi-Fi? Here’s How to Fix It
http://gizmodo.com/5944761/does-ios-6-have-a-wi+fi-bug
How To Fix Wi-Fi Connectivity Issue After Upgrading To iOS 6
http://www.iphonehacks.com/2012/09/fix-wi-fi-connectivity-issue-after-upgrading- to-ios-6.html
iOS 6 iPad 3 wi-fi "connection fix" for netgear router
http://www.youtube.com/watch?v=XsWS4ha-dn0
Apple's iOS 6 Wi-Fi problems
http://www.zdnet.com/apples-ios-6-wi-fi-problems-linger-on-7000004799/
~~~~~~~~~~~~~~~~~~~~~~~
iPad: Issues connecting to Wi-Fi networks
http://support.apple.com/kb/ts3304
How to Boost Your Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Boost-Your-Wi-Fi-Signal.h Mt
Troubleshooting a Weak Wi-Fi Signal
http://ipad.about.com/od/iPad_Troubleshooting/a/Troubleshooting-A-Weak-Wi-Fi-Sig nal.htm
How to Fix a Poor Wi-Fi Signal on Your iPad
http://ipad.about.com/od/iPad_Troubleshooting/a/How-To-Fix-A-Poor-Wi-Fi-Signal-O n-Your-iPad.htm
iOS Troubleshooting Wi-Fi networks and connections http://support.apple.com/kb/TS1398
iPad: Issues connecting to Wi-Fi networks http://support.apple.com/kb/ts3304
WiFi Connecting/Troubleshooting http://www.apple.com/support/ipad/wifi/
How to Fix: My iPad Won't Connect to WiFi
http://ipad.about.com/od/iPad_Troubleshooting/ss/How-To-Fix-My-Ipad-Wont-Connect -To-Wi-Fi.htm
iOS: Connecting to the Internet http://support.apple.com/kb/HT1695
iOS: Recommended settings for Wi-Fi routers and access points http://support.apple.com/kb/HT4199
How to Quickly Fix iPad 3 Wi-Fi Reception Problems
http://osxdaily.com/2012/03/21/fix-new-ipad-3-wi-fi-reception-problems/
iPad Wi-Fi Problems: Comprehensive List of Fixes
http://appletoolbox.com/2010/04/ipad-wi-fi-problems-comprehensive-list-of-fixes/
Connect iPad to Wi-Fi (with troubleshooting info)
http://thehowto.wikidot.com/wifi-connect-ipad
10 Ways to Boost Your Wireless Signal
http://www.pcmag.com/article2/0,2817,2372811,00.asp
Fix iPad Wifi Connection and Signal Issues http://www.youtube.com/watch?v=uwWtIG5jUxE
Fix Slow WiFi Issue https://discussions.apple.com/thread/2398063?start=60&tstart=0
How To Fix iPhone, iPad, iPod Touch Wi-Fi Connectivity Issue http://tinyurl.com/7nvxbmz
Unable to Connect After iOS Update - saw this solution on another post.
https://discussions.apple.com/thread/4010130
Note - When troubleshooting wifi connection problems, don't hold your iPad by hand. There have been a few reports that holding the iPad by hand, seems to attenuate the wifi signal.
Some Wi-Fi losses may stem from a problematic interaction between Wi-Fi and cellular data connections. Numerous users have found that turning off Cellular Data in Settings gets their Wi-Fi working again.
You may have many apps open which can possibly cause the slowdown and possibly the loss of wifi. In iOS 4-6 double tap your Home button & at the bottom of the screen you will see the icons of all open apps. Close those you are not using by pressing on an icon until all icons wiggle - then tap the minus sign. For iOS 7 users, there’s an easy way to see which apps are open in order to close them. By double-tapping the home button on your iPhone or iPad, the new multitasking feature in iOS 7 shows full page previews of all your open apps. Simply scroll horizontally to see all your apps, and close the apps with a simple flick towards the top of the screen.
Wi-Fi or Bluetooth settings grayed out or dim
http://support.apple.com/kb/TS1559
~~~~~~~~~~~~~~~
If any of the above solutions work, please post back what solved your problem. It will help others with the same problem.
 Cheers, Tom

WIll this work with BlackBerry (RIM) phones or pads?

I want to use FireFox Sync but I have a BlackBerry Curve phone (9630). I know that the BB operating system is Research in Motion Limited aka RIM. I want to know if this software (Sync) will work with my BlackBerry device.
Thank you

Firefox Home is only for the iPhone, iPad, iPod touch at moment. http://www.mozilla.org/en-US/mobile/home/
Back in Sept 2010 they thought there may be a version for Blackberry in future but no real work on that since http://blog.mozilla.com/mobile/2010/09/28/firefox-home-looking-to-the-future/

HT4623 I have purchased a Epson Workforce 435, can't AirPrint, will this work with the first gen iPad?

I have purchased a Epson Workforce 435, can't AirPrint, will this work with the first gen iPad?

Also i forgot to add after a night of searching how to turn the Epson Workforce 435 printer into Airprint friendly and not iPrint (which are 2 completely different things) i donwloaded a program called (AirPrint Activator) from HandyPrint. The link is below to download the software. Once i installed the application i set my printer to be shared over my Home Network (Wi-Fi Network). Once you have done that, open the AirPrint Activator application you have just downloaded, swtich it ON from OFF mode, and then you should easily see your printer name in my case EPSON Workforce 435 and then just close the application. Then go to your IOS Device like your iphone/ipad/ipod touch select a picture that you want to test print or even an attached PDF from your email, and select Print in the share button. You will then be prompted to select your printer. Your printer you automatically be recongised then just select print. And now you have a complete AirPrint ready printer with a Printer that doesnt even support the function. Im sure you can do this to all Wireless Printers, even if they came out before Apple AirPrint service launch.
And also if you still need guidance and a video to follow from just click the Youtube link below
http://www.youtube.com/watch?v=9r75m_VUr0E
Download AirPrint Activator Link
http://netputing.com/handyprint/
I hope that this helps your question and enjoy your day
Kind Regards
Ahmed

TS3999 when will iCloud work with outlook 2013?

when will iCloud work with outlook 2013?

I have been running Outlook 2013 for a couple of weeks now using W8 64bit.
It works with iCloud and is a little flakey, what I've found.
1. 4 X Junk Folders.
2. Some emails cannot be moved into saved folder, saying message has changed, but opening in outlook safe
mode allows move.
3. Sent Items (this computer only) and Sent Messages, so you have to move emails from Sent Items to Sent
Messages if you want them to sync across devices.
4. Icloud control panel say's there is a problem and not syncing but it is no problem.
I can live with the bugs, but I wish the last icloud update would have corrected the issues.

MyDAQ fails Self-Test and will not work with any software

I cannot get the myDAQ to communicate properly. I did everything I could to make sure that the device was detected by the computer. It shows up in Device Manager under Data Acquistition Devices as NI myDAQ and in NI MAX as "myDAQ1", but I receive errors when trying to use it with any NI program.
Trying to self-test or reset the device in MAX gives these errors:
-The self test failed. -88705 The specified device is not present or is not active in the system. The device may not be installed on this system, may have been unplugged, or may not be installed correctly.
-There was a problem resetting the device. Error code: 80040383.
It also gives this error when trying to use the Elvis Oscilloscope:
-Error -200324 occurred at ELVISmx_DAQmx Create Channel (AI-Voltage-Basic).vi:1
Possible reason(s):
NI-DAQmx is unable to communicate with the device. Make sure the device is present in and accessible to the system, is not currently being reset, and is not reserved by another driver such as Traditional NI-DAQ (Legacy).
I have uninstalled and reinstalled and repaired all installed NI products twice. I updated to NI-DAQmx 9.8.0 and am using NI Elvis 4.5. I have checked NI Device Loader and mDNS Responder Service in Services and everything is running properly. I have also tried Reset Configuration Data in NI MAX several times. I turned Fast Startup off as suggested in one article. I have tried plugging it into every single USB port on my computer; all 8 of them. The blue led is on when plugged in, but I cannot figure out why it will not work with any of the software. I am running Windows 8 Pro 64-bit. Also, it completely works on the school computers running Windows 7 without any problems. I would like to have it functioning with all the NI software purchased, but all I want to do is use the oscilloscope software for now. It has honestly been way too much work and a huge loss of time for something that should work out of the box. Please help me resolve this, thanks.
Attachments:
ni_support.zip ‏341 KB

Hi chaka123,
I had already read that article so it wasn't anything I hadn't tried. I did, however, uninstall both NI DAQmx and NI ELVISmx, ran the registry cleaner and then plugged my device in. Now it shows up as USB Flash Firmware Updater. This is actually what it showed the first time I plugged this in out of the box. After much troubleshooting I was finally able to get it to at least recognize it as a myDAQ. This is problem I know others have had.
To answer your questions:
Does the Test Panels work at all?
I am not sure, I didn't try it before uninstalling. Now the Test Panels isn't an option because it is recognized as the Flash Firmware Updater.
Have you tried to delete the device in MAX?
Once again, I cannot because it shows up as Flash Firmware Updater.
Which is the color of the icon on the left side of “myDAQ1”?
It was green before the uninstall. Now it shows the USB symbol.
I tried deleting the driver. When I plugged the device back it, Windows started automatically trying to load a driver for it. Now it shows as NI myDAQ with a yellow exclamation symbol. In MAX it shows as NI myDAQ with a USB symbol. Under Driver Details it says "Windows does not have a driver associated with your device."
What folder can I manually point Device Manager to in order to load the correct driver?
Attachments:
devicemanager.PNG ‏40 KB

HT2484 Is iSync working with OS X Lion?

Is iSync working with OS X Lion?

iSync has been discontinued in Mac OS X 10.7 Lion and is no longer included in the OS.
However, iSync v3.1.2 from Snow Leopard does work in Lion if you copy the application across.
It won't work forever though and is unsupported, as the SyncServices framework upon which iSync is built is deprecated in Lion, meaning it should no longer be used and will be completely removed in some future update.

Time Machine will NOT work with Airport Disks!

It looks like Time Machine will not work with Airport Disks after all. All references to Airport have been removed from the Time Machine page:
http://www.apple.com/macosx/features/timemachine.html
It also specifically says: "You can designate just about any HFS+ formatted FireWire or USB drive connected to a Mac as a Time Machine backup drive. Time Machine can also back up to another Mac running Leopard with Personal File Sharing, Leopard Server, or Xsan storage devices."
Surely, they would have included the Airport Extreme Base Station in this list if it was supported.
I really hope there will be another firmware update for the AEBS which will bring compatibility with Time Machine, because Time Machine was the only reason for me to buy an AEBS. (I only use it as a small backup server, I don't even have wireless networking enabled. There were other solutions, e.g. from Synology, which are faster and more reliable than AEBS disk sharing, but Synology stated their network drives would not be compatible with Time Machine.)

Here's how you can potentially use your AirDisk with TimeMachine (beware that YMMV), but it should work as it works with every other "unsupported" device.
1) Mount your AirDisk so it appears on your Mac
2) Open Terminal.app
3) change directories to the AirDisk's root folder located in "/Volumes"
ie: cd "/Volumes/AirDisk Name"
4) execute this command to "bless" the drive to be used with time machine:
touch .com.apple.timemachine.supported
5) Start TimeMachine and if all went well, it should recognize your AirDisk drive and use it for TM.
This should also work on NFS shares, SMB shares, AFP shares, basically anything. It has worked up until the last developer seed, so unless they yanked this at the last minute, it should still work.
Now, the reason why Apple removed this feature may be due to the unreliability of the AirDisk, so be cautious.

Can a j2me emulator work with a real bluetooth adaptor?

Can a j2me emulator work with a real bluetooth adaptor?
Currently I need to work on a project that will need bluetooth and a SE P910i phone.
But the phone is not available to me at all times.
So, I am wondering if it is possible to have the emulator connect to a real bluetooth adaptor that is connected to the computer and communicate with other bluetooth phones....
Any help is very much appreciated :)

I have not found a solution to it. And I concluded that it cannot be done.
Bluetooth, on the emulator is emulated too. so if your program needs to test on 2 phones, then you can just open up 2 emulators and they will be able to find each other in their emulated world.
Try with the bluetooth demo that comes with J2ME. I cannot get to see any pictures when I run them on real phones but it worked flawlessly on emulators......

Does X-Fi MB3 work with GeForce HDMI audio device?

If I buy http://software.store.creative.com/s...106-21569.aspx, will it work with my GTX 760's HDMI audio device which I'm connecting to my receiver?

Funny fact: Today, after a reboot, the card worked again... Dunno why... But it does...

Will Nike+ work with my iPhone 3G

I know it works with 3GS, but will it work with iPhone3G

No it wont. We tried it on my GFs 3G. =(
It just says 'This accessory is not compatible with this device'. Good thing Apple's return policy is decent. I was able to get a full refund.
It seems like a pretty arbitrary limitation to me. Apple in their infinite wisdom have decided not make it work. Perhaps an attempt to sell more Nanos?

Will isync work with a blackberry (bluetooth device)

Similar Messages

Maybe you are looking for