Will it hurt my Macbook Pro to add memory?

I currently have 4 GB of RAM in the Macbook Pro 15" mid-2010 and I just want to take one of the chips out and put in a 4GB chip in, making me have 6GB of memory. Will this hurt the computer's performance to not have equal amounts of memory on each side? I only want to upgrade because im constantly getting down to about 8mb's of ram and it slows the whole computer.

More RAM is always beneficial but you add more, Mavericks will use it the same way - all it can. This is by design.
If you are running programs that require a lot of RAM they will continue to do so. To determine if a lack of RAM is resulting in performance degradation examine the value for "Swap Used". If it is zero, the fact that you are using all 4 GB is of absolutely no consequence.
If Swap Used is greater than zero find out what app or process is so demanding. Some applications, the most popular of which seems to be Google Chrome, are notorious resource hogs that will slow down your Mac no matter how much RAM you install. Other "optimizing" or "cleanup" or "security" or "anti-virus" junk will also result in needlessly burdening your system.

Similar Messages

Need a printer driver for a PIXMA MG2900 that will work on my MacBook Pro Operating System OSX 10.4.11

I have just purchased a Canon Pixma MG2900 printer and need to find a driver for this printer that will work with my MacBook Pro Operating System OSX Version 10.4.11.
I was directed to iTunes PIXMA/MAXI, but it didn't seem to download for me. It did say that it was for IPads or IPhones, not sure that it's intended for use on a computer.

Probably best to go to a library and submit your resume there.
You can make many web browsers claim to be ie. Here is how.
TenFourFox -- It's a port of the latest FireFox to run on older hardware and software.
"World's most advanced web browser. Finely tuned for the Power PC."
-- works for me on 10.4. Supports 10.5
http://www.floodgap.com/software/tenfourfox/
alternative download site:
http://www.macupdate.com/app/mac/37761/tenfourfox
OmniWeb uses the lastest Safari framework. The open source WebKit. Other browsers like Safari and iCab use the OS version of WebKit. The OmniWeb downloaded dmg includes it's own copy of the latest WebKit.
http://www.omnigroup.com/products/omniweb/
Safari 4.1.3 for Tiger
http://support.apple.com/kb/DL1069
iCab - The Taxi for the Internet
http://www.icab.de/
What is my user agent?
http://whatsmyuseragent.com/
You want to change your user agent to be ie.
in tenfourfox
tools > add-ons
seearch for change user agent
install
user agent switcher
tools > User agent switcher
change to ie.

Will a early 2011 macbook pro run ml airplay mirroring

Will an early 2011 macbook pro run airplay mirroring on moutain lion

Only thing I would add if I was you, would be to put 8GB RAM into your machine. That will help any issues of being slow, but it should run just fine. Having more ram is always good, and for the price point its well worth it.
I have on 2010 Macbook Pro and it screams. Also on 2011 Macbook Air with no issues.
As for running slow, it could incompatible apps, or apps that havent been updated yet, it would be impossible to pinpoint one thing.

Can anyone recommend a USB CF card reader that will work in my Macbook Pro Retina? My USB card readers for CF cards do not work

At present, the only way I can load photos from a CF card to my new Macbook Pro Retina is by loading them onto an external hard drive via an old PC that can accept either of my USB card readers, then plugging the external hard drive into my MBP. Neither the USB card reader or the cable that comes with the Canon HDSLR camera will transfer photos directly to my MBP. I find it unbelievable that I have to go to a PC to load photos because I can't do it with my new MBP.
Has anyone found a reliable USB CF card reader, or one that connects via thunderbolt or HDMI, at any price, that will work directly with the new MBP Retina?

This is what we need:
Location photoshoot - we use the Canon EOS 5D Mk II still camera & the Canon FX100 pro camcorder.
CF cards are: SanDisk Extreme UDMA & SanDisk Extreme Pro UDMA 6 for video (I think they are both Type II) My Mac recognises them both as FAT 32 format
My MBPRetina is on the latest version of Mountain Lion OSX 10.83
the files from the camcorder will transfer to my MacBook Pro Retina directly via the camera's cable but it is quite slow & it means I cannot continue to film while downloading files but this we can live with.
the files from the still camera Canon EOS 5D Mk II will not transfer directly via the camera's cable - have yet to get the Canon software to download, but via the camera's cable will not help anyway as we need to have the still camera free to keep shooting.
We need to be able to take out the CF card from the first part of the shoot & download the still shots while just on the Macbook's battery power, while we insert a fresh CF card back into the still camera to continue with the next part of the shoot simultaneously (while the first card is downloading.)
The files from the first part of the shoot will be both in RAW (.CR2) & Jpeg format. We just need to quickly transfer the jpegs, then I do a quick sort, batch the best ones as black/white images, & use these in a client slideshow immediately after part 2 of the shoot.
Obviously we need fast data transfer speeds, & rely on the MBP's battery power while on a location shoot.
The card readers I have tried are an older specific CF card reader branded as Palm, & a USB 2 multi card reader branded as Travel Flash. With both readers, the lights on the readers flash on & off, & the MBP recognises the card & the files will even appear both in Finder & in i-Photo, so it starts importing, then aborts with an error message saying:
'The Finder can’t complete the operation because some data in “” can’t be read or written.
(Error code -36)'
& another message saying:
'the disk was not ejected properly'.
So it appears the MBP does read the CF cards but the card readers don't stay connected, no matter what angle I put them on or however many times I re-connect them.
Yes, they are probably cheap & I want to buy a decent one.
So, in summary:
the card reader needs to work when the MBPR is only on battery power (I read in some forums that some USB card readers aren't so reliable on the laptop's battery power)
the card reader needs to be quite fast. I have read the USB 3 readers won't read CF cards at higher than USB 2 speeds. Is this true? Are the firewire connected ones faster, & if so, are they still reliable on the MBP's battery power?
From research, it appears my problem is associated with my specific model of Mac & platform, being MacBook Retina on Mountain Lion OSX Version 10.83. If any of the recommended card readers have been successful with this, plese let me know.
Thanks heaps for the suggestions so far.

I've encountered 4HDD/11/40000000 SATA(0,0). AFTER SOME RESEARCH IN APPLE COMMUNITY, I LEARNT THAT IT'S A HARDWARE ISSUE. SO I WILL BE TAKING MY MACBOOK PRO TO NEAREST APPLE STORE. MY QUE IS, WILL IT BE FIXED IF I UPGRADE FROM OSX 10.8.5 TO MAVERICKS?

I've encountered 4HDD/11/40000000 SATA(0,0). AFTER SOME RESEARCH IN APPLE COMMUNITY, I LEARNT THAT IT'S A HARDWARE ISSUE. SO I WILL BE TAKING MY MACBOOK PRO TO NEAREST APPLE STORE. MY QUE IS, WILL IT BE FIXED IF I UPGRADE FROM OSX 10.8.5 TO MAVERICKS? What other options do I have? What can be an approximate cost for fixing this problem?

Of course not. It's a hardware problem, so it can't be fixed by upgrading software. The only option you have got is to take the MacBook to an Apple Store or reseller.
That error indicates a problem with the hard drive. What you have to do is to make a backup of your files and take the MacBook to an Apple Store or reseller, so they can confirm that the problem is the hard drive and not the SATA connector, which could be worse.
If it's a hard drive issue, it's not expensive (about $100-200, depending on the hard drive). If it's a SATA connector issue, the whole logic board may have to be replaced.
Note that you can replace the hard drive yourself if you want, but the cost between doing it yourself and taking the MacBook to an Apple Store or reseller is similar

GarageBand 10.0.2 will not open on MacBook Pro 15-inch, Early 2011 running OSX 10.9.5. w/ 8 GB RAM and 1 TB SSD Samsung 840 EVO.

GarageBand 10.0.2 will not open on MacBook Pro 15-inch, Early 2011 running OSX 10.9.5. w/ 8 GB RAM and 1 TB SSD Samsung 840 EVO.
Have deleted (secure delete) and reinstalled several times. Got it to open once right after download... Usually crashes/hangs upon attempted start-up, then shows as "Application unresponsive". Must be forced to quit.
No other audio interfaces or drivers installed that I am aware of. Playback through onboard audio interfaces, sometimes routed to Apple TV via Cat 5 cable, out to receiver via fiber optic SPDIF, or to Panasonic HDTV via HDMI cable through Thunderbolt port.

When you see a beachball cursor or the slowness is especially bad, note the exact time: hour, minute, second.
These instructions must be carried out as an administrator. If you have only one user account, you are the administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
The title of the Console window should be All Messages. If it isn't, select
          SYSTEM LOG QUERIES ▹ All Messages
from the log list on the left. If you don't see that list, select
          View ▹ Show Log List
from the menu bar at the top of the screen.
Each message in the log begins with the date and time when it was entered. Scroll back to the time you noted above.
Select the messages entered from then until the end of the episode, or until they start to repeat, whichever comes first.
Copy the messages to the Clipboard by pressing the key combination command-C. Paste into a reply to this message by pressing command-V.
The log contains a vast amount of information, almost all of it useless for solving any particular problem. When posting a log extract, be selective. A few dozen lines are almost always more than enough.
Please don't indiscriminately dump thousands of lines from the log into this discussion.
Please don't post screenshots of log messages—post the text.
Some private information, such as your name, may appear in the log. Anonymize before posting.

Will icloud install on macbook pro with os 10.6.8

Will icloud install on macbook pro with OS 10.6.8?

Welcome to the Apple community.
iCloud is not an application you can download and install independently. It is part of the OS X 10.7.2 operating system. So in essence no you cannot use iCloud with OS X 10.6.8 on your Mac.

Will Lion run on macbook pro 1.1 2006 running snow leopard

Trying to find out if lion will run on 2006 macbook pro 1.1 running snow leopard , trying to sync my i5 to itunes 10.7 as i get an error message when i plug i5 in saying i need version 10.7 . laptop recognises i5 as camera Anu ideas

Dazfin wrote:
Trying to find out if lion will run on 2006 macbook pro 1.1 running snow leopard 10.6 , trying to sync my i5 to itunes 10.6 as i get an error message when i plug i5 in saying i need itunes version 10.7 . laptop recognises i5 as camera Any ideas
What are your computer specs, memory, etc.
Cheers
Pete

I created a iMovie with photos, music and titles; shared it with the media browser and burned it on a DVD RDL. The disc will play on my MacBook Pro, but it will not play on my Samsung Blu-ray Disc Player or a smaller portable DVD player. Why?

I created an iMovie with photos, music and titles; shared it with the media browser and burned it on a DV+RDL. The disc will play on my MacBook Pro, but it will not play on my Samsung Blu-ray Disc Player or a smaller portable DVD player. Why?

Probably because they don't accept that media.
Try using Verbatim DVD+DL (if your project exceeds 2 hours) or Verbatim DVD-R if it doesn't.

CD will not eject and MacBook Pro won't restart

CD will not eject and MacBook Pro won't restart.

Do a SMC reset, that hopefully should get you booting and while booting, hold the option/alt and trackpad button down at the same time. Once a row of icons appears and if the disk hasn't ejected via the trackpad method, then press the eject key on the keyboard until it does.
Click the arrow to boot up OS X.
http://support.apple.com/kb/HT3964
If this doesn't work, then take the machine in for service.

Is there a compact flash and SDXC card reader with USB3 and or thunderbolt connections that will work with new MacBook Pro retina laptops running OSX Mavericks please?

Is there a compact flash and SDXC card reader with USB3 and or thunderbolt connections that will work with new MacBook Pro retina laptops running OSX Mavericks please?

Yes, I too had this problem.
I was issued an update from Apple for a new version software as well as a new version of Lightrooom and now it shows up on the desktop and in finder as it should.
MacBook Pro Retina running 10.8.2 (12C54)
Lightroom running 4.1
Hope that helps.
aa

When software will be update for MacBook pro retina?

When software will be update for MacBook pro retina?

But programmes like Microsoft office pages numbers and e.t.c. don't work like they must work.when you start to use them screen no like retina

Will my early 2008 MacBook Pro be able to run OS X Yosemite?

Will my early 2008 MacBook Pro be able to run OS X Yosemite?

I have the same Macbook Pro as you. You should read this Apple page: http://www.apple.com/osx/how-to-upgrade/?cid=wwa-us-kwg-mac-com While you can install Yosmite, many cool features will not work on pre-2012 models, including: Handoff and Instant Hotspot, AirDrop, AirPlay Mirroring, Peer-to-Peer AirPlay and Power Nap. Additionally, if you have not already upgraded your iPhoto library from iPhoto 8.1.2 (as I have not), I believe you will need to purchase the upgrade after you install Yosemite based on what I read here: https://discussions.apple.com/thread/6602872 . Good luck! If you do or have proceeded with updating to Yosemite, please come back to this thread and share how the experience went. Thanks.

When will a the new Macbook PRo or Macbook Air come out?

When will a the new Macbook PRo or Macbook Air come out?

Sorry, no one here will know that.

What SSD (Solid State Drives) will work with a MacBook Pro unibody A1278

What SSD (Solid State Drives) will work with a MacBook Pro unibody A1278?
I see all these options and I would like to know proper dimensions and speed:
SATA III (6 Gbit/s)
SATA II (3 Gbit/s)
SATA (1.5 Gbit/s)
PATA (IDE)
mSATA
PCI Express
Thanks!

Thanks! It looks like Sata III is the way to go and most are happy with this one:
Samsung 840 EVO
http://www.amazon.com/Samsung-Electronics-2-5-Inch-Internal-MZ-7TE250BW/dp/B00E3 W1726/ref=sr_1_1?s=pc&ie=UTF8&qid=1396894663&sr=1-1&keywords=ssd+2.5

Will it hurt my Macbook Pro to add memory?

Similar Messages

Maybe you are looking for